Restore Database Failed
Apr 13, 2006
Hi,
I backed up a database to drive f:, then did restore and set options to move the .mdf and .ldf files to different HDs (f: for .mdf and d: for .ldf).
During restore I got a disk IO error. The restore terminated abnormally. Now I have no DB but the .mdf and the .ldf have been moved to the HDs that I specified in the restore options.
I cannot move the .bak file from the f: it gives me an IO error when I try this. It did allow me to copy the .mdf from f: to d:
I need to know how to recover the db frm the .mdf and .ldf files. I have tried using sp_attach_db and got the following error:
An error occurred while processing the log for database 'MyDB'
Please help.
Thank you,
Jeff
View 2 Replies
ADVERTISEMENT
Apr 27, 2007
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Thanks!
View 4 Replies
View Related
Aug 1, 2007
Hello, I have a database backup taken from SQL Server 2005. I originally had placed the backup into a file in My Documents, but when I went to locate the backup file there (C:/Documents and Settings...), the folders would not expand. So I moved the backup to the C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackup directory and was able to select the file there. When I try to restore this file into SQL Server 2005 Express using the Management Studio, I get the following error message:
Restore failed for Server 'DELL670DESKTOPSQLEXPRESS'. (Microsoft.SqlServer.Express.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseOptions.RunRestore()
===================================
System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLsequoia.mdf'. (Microsoft.SqlServer.Express.Smo)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&LinkId=20476
------------------------------
Can you please help me figure out what I am doing wrong?
Thanks so much, LC
View 6 Replies
View Related
Dec 22, 2006
My restore fails with a message saying the database is in use, which may be true. How do I identify and kick out the user(s)?
Thx, Liston
View 7 Replies
View Related
Nov 1, 2012
I am working on sql server 2008. I have a database , flooded with GBs of data in each days.
I back up the database and trying to restored it on another server.
But the operation failed.
View 1 Replies
View Related
Sep 7, 2005
Hi, i need help about restore a DB
I did a backup of a database using SQL Server Management Studio, but when i try to restore my database now, i get this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Restore failed for Server 'Athenas'. (Microsoft.SqlServer.Smo)
System.Data.SqlClient.SqlError: The media set has 2 media families but only 1 are provided. All members must be provided. (Microsoft.SqlServer.Smo)
What do i doing so bad??
Thanks for ur opinions and help.
Regards
------------------------------------------
JeanScrash
View 2 Replies
View Related
Jun 27, 2013
I have a two SQL 2012 databases in Development Environment as below:
1. LT_MSCRM (Main Development Database; Same database name is used across Testing and Live servers)
2. LTTEST_MSCRM (Just Created to practice something)
I have take the database back of LT_MSCRM from Testing server and want to restore it on LTTEST_MSCRM in Dev. Its failing because of the following error.
System.Data.SqlClient.SqlError: The file 'C:Program FilesMicrosoft SQL ServerMSSQL11.MSSQLSERVERMSSQLDATALT_MSCRM.mdf' cannot be overwritten. Â It is being used by database 'LT_MSCRM'. (Microsoft.SqlServer.SmoExtended)
View 11 Replies
View Related
Jul 23, 2005
The following failed in EM (or whatever it is called now managementstudio I think) and I scripted it out and ran it in a query window toget more info. This works fine in SQL 2000 but not in 2005. I also triedto 'create' the database first then ran this command below but with the'force restore over existing database' checked on but this failed alsowhich is odd as well. Any ideas. This is my very first play with 2005 soit is not off to a great start although to be fair, i seem to have gorlucky on the install as it all went OK. BTW, is there a more approriatenewsgroup for this query?ThanksRESTORE DATABASE [bob] FROM DISK = N'C:BigFujiCopiesBob.bak' WITHFILE = 1,MOVE N'bob_Data' TO N'c:Program FilesMicrosoft SQLServerMSSQLDataob_Data.MDF',MOVE N'bob_Log' TO N'c:Program FilesMicrosoft SQLServerMSSQLDataob_Log.LDF',NOUNLOAD, STATS = 10GOMsg 5122, Level 16, State 1, Line 1Directory lookup for the file "c:Program FilesMicrosoft SQLServerMSSQLDataob_Data.MDF"failed with the operating system error 3(error not found).Msg 3156, Level 16, State 3, Line 1File 'bob_Data' cannot be restored to 'c:Program FilesMicrosoft SQLServerMSSQLDataob_Data.MDF'.Use WITH MOVE to identify a valid location for the file.Msg 5122, Level 16, State 1, Line 1Directory lookup for the file "c:Program FilesMicrosoft SQLServerMSSQLDataob_Log.LDF" failed with the operating system error3(error not found).Msg 3156, Level 16, State 3, Line 1File 'bob_Log' cannot be restored to 'c:Program FilesMicrosoft SQLServerMSSQLDataob_Log.LDF'. Use WITH MOVE to identify a validlocation for the file.Msg 3119, Level 16, State 1, Line 1Problems were identified while planning for the RESTORE statement.Previous messages provide details.Msg 3013, Level 16, State 1, Line 1RESTORE DATABASE is terminating abnormally.*** Sent via Developersdex http://www.developersdex.com ***
View 2 Replies
View Related
Aug 4, 2015
I'm working on SQL 2012 Box, which is having Logshipping failed on secondary database, the secondary database was in stand by mode right now but no more restore operation performed on this database since 2 weeks! We checked in the SQL error log and found the error code 14421, severity 16, stat: 1
How to reset the logship back to normally, do I need to disable the jobs before proceed any operation!
View 7 Replies
View Related
Jun 26, 2015
I've been restoring database from couple of times but getting failed because of following error.
I've been using SSMS free version from microsoft website.
Error system.data.sqlclient.sqlerror: create database  or alter database failed because the resulting cumulative database size would exceed your licensed limit of 10240MB per database.
View 3 Replies
View Related
Dec 4, 2005
Hi
I have problem when trying to resotre my DB from sql server 2000 to sql server 2005.
You have to know also that my DB witch i want to restore with
sql server 2005 maded with sql server 2000 and the message
shown with attached pictures show the message detailes
http://www.arabmoheet.net/forum/Members_Upload_Pics/1/sqlerror.JPG
Thanks all
View 2 Replies
View Related
Nov 23, 2005
Hi everybody,
View 1 Replies
View Related
Aug 30, 2004
HI guys,
I just restored a database on a new server with a backup(complete backup stored in backup device) from another database on another server using the "with move" option. In fact here was my process:
Alter database ngauge SET SINGLE_USER WITH ROLLBACK IMMEDIATE
restore database ngauge
from disk = 'C:Program FilesMicrosoft SQL ServerMSSQLBACKUPgauge1.BAK'
with move 'NGAUGE' to 'C:Program FilesMicrosoft SQL ServerMSSQLDatagauge_Data.MDF',
move 'NGAUGE_Log' to 'C:Program FilesMicrosoft SQL ServerMSSQLDatagauge_Log.LDF'
Alter database ngauge SET READ_WRITE
it worked.
But it did not move the 98 or so users/logins...from the source database
what is going on??? what am I doing wrong??!!
Please help!
'W
View 2 Replies
View Related
May 19, 2008
Hi,
I am trying to restore a production copy. I have only the .bak file with me. While restoring, i m facing the following error. can u please help me... thanks in advance.
"MODIFY FILE encountered operating system error 112(There is not enough space on the disk.) while attempting to expand the physical file."
I have placed the data files(52GB) in D: drive(140GB free space) and transaction log file(100GB) in F: drive(465GB free space). Still i am facing this error...
-- Sudheer
View 8 Replies
View Related
Jun 6, 2008
We were trying to restore our production server db backup in test server over LAN (due to space shortage on test server) . Test server hanged and did not respond for abt more than 15 hours (backup file 40 GB ) . The we restarted the server (resetting the power button) . Now it's showing the status 'Restoring' . According to me it's not doing anything (as seen in task manager workload ) . So how can I go ahead with checking the db .
Due to 'restoring' status I get following error
------------------------------------
Msg 927, Level 14, State 2, Line 1
Database 'envdb' cannot be opened. It is in the middle of a restore.
----------------------------------
View 3 Replies
View Related
Jul 6, 2007
Hai,
I created log shipping btw two servers using maintenance plan.
maintainanace plan taking the log backups and copying those backups in the standby server but unable to restore thos log backups
i am getting the following error ( for the Log Restore job)
Executed as user: NT AUTHORITYSYSTEM. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
In the logshipping monitor history i found the follwing error
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 4305: [Microsoft][ODBC SQL Server Driver][SQL Server]The log in this backup set begins at LSN 4830000001442600001, which is too late to apply to the database. An earlier log backup that includes LSN 4828000001884200001 can be restored.
[Microsoft][ODBC SQL Server Driver][SQL Server]RESTORE LOG is terminating abnormally.
View 4 Replies
View Related
May 19, 2008
Hi all,
I have SQL server 2005 enterprise edition on windows server 2003 machine. when i took the back of the database from this sytem and try to restore the backup on SQL server 2005 R2 enterprise edition on client machine. it is giving me following error
"
Restore failed for Server '10.112.12.229'. (Microsoft.SqlServer.Smo)
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLFX_Global_backup_200805141500.mdf'. (Microsoft.SqlServer.Smo)
"
Please tell what is the error about?
Can it be possible to restore a back up of different operating system machine to other ?
View 5 Replies
View Related
Jul 5, 2007
Hi
Hopefully someone can help me.
I'm trying to restore my DB to a new server and also a new instance of SQL 2005 SP2+ hotfix KB934458.
I've successfully restored my MSDB database and everything seems to be working fine, but now when I'm trying to do a restore of my Database RMc to the attached SAN,
I'm getting the error:
System.Data.SqlClient.SqlError: The path 'H:' has invalid attributes. It needs to be a directory. It must not be hidden, read-only, or on a removable drive. (Microsoft.SqlServer.Smo)
the H: is the Drive letter for my attached SAN.
The path I'm trying to give is H:\DBData for the MDF-file and the H:DBLog for the LDF-file.
I have the DB running on another server also with a SAN attached and there are no problems.
I also moved the MSDB to another drive on the SAN - a G-drive without any problems.
Is there someone who have a good idea?
TSloth :-)
View 3 Replies
View Related
May 22, 2007
I am moving my data base from one computer to a new one. I placed the .bak file in the backup folder on the new computer (Windows Vista). I keep getting these errors I have checked the security settings and my user account has full privledges. I added my windows login to the SQL Administrators as well.
Here is the error msg.: TITLE: Microsoft SQL Server Management Studio Express
------------------------------
Restore failed for Server 'laptopsqlexpress'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLPRM - 6009757.mdf'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
What am I missing?
View 16 Replies
View Related
Sep 21, 2000
How does one correctly go about restoring the MSDB database?
How/what should I do with the status (loading)?
I have a good backup of the MSDB.
Any help will be appreciated.
View 2 Replies
View Related
Jul 1, 2015
I have a database size of 9.8TB and I backup it to 30 backup devices. Each one has 110GB after backup compression.I tried to restore these files to standby server via 100MbE network but it always failed. My colleague told me this never happen before and I said yes because I have done this before a lot of times when backup devices are significantly smaller.He said the only way is to copy backup files locally and restore locally. But I am trying another method, I create more: 64(maximum) backup devices and try to restore via network again.SQL server version is Microsoft SQL Server 2012 (SP1)
- 11.0.3401.0 (X64)  Jan 9 2014 13:22:15  Copyright (c) Microsoft CorporationÂ
Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.1 <X64> (Build 7601:
Service Pack 1) .
---Â error message ---
5 percent processed.
10 percent processed.
15 percent processed.
[code]....
RESTORE DATABASE is terminating abnormally.
View 11 Replies
View Related
Feb 21, 2008
Hi,
I am administering several SQL Servers running SQL Server 2005 SP2 Build 3042.
I have a common maintenance plan that runs on each of the servers. The maintenance plan runs
fine on all the servers except for one. On the one server the Database Integrity check fails with the following error:
Check Database integrity on Local server connection
Databases: <list of databases>
Include indexes
Task start: 2008-02-21T00:05:42.
Task end: 2008-02-21T00:05:46.
Failed0) Alter failed for Server €˜XYZ€™
I created a test maintenance plan to just do the integrity check and selected one database only and this also failed with the same error message. I ran this test maintenance plan and configured it for each of the databases in question and it failed each time.
If I run the DBCC manually against the databases they all report fine.
I read some of the post that talked about the €œAllow Updates€? being set incorrectly but that does not apply to my problem since my configured and run values are set to 0.
Does anyone know what the problem could be?
View 23 Replies
View Related
Jan 29, 2008
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLAlamoDB.mdf'. (Microsoft.SqlServer.Express.Smo)
--------------------------------
Hi,
I got this error while trying to restore my database (which was running on SQL Server 2005 Express Edition) onto another machine's SQL Server 2005 Express Edition.
Can anyone plz. help me out with this error.
Thanks & Regards
Trinadh P.
View 4 Replies
View Related
Sep 27, 2004
I got this system error log in the event viewer every time I start the SQL Server cluster resource:
The Microsoft Clustering Service failed restore a registry key for resource SQL Server when it was brought online. This error code was 2. Some changes may be lost.
Even though the SQL seems to be working fine now, I won't know if something drastic will happen later. :confused:
Searching the Internet for resolution, I saw this article. The Microsoft Knowledge Base Article - 307469 (http://support.microsoft.com/default.aspx?kbid=307469) requires using the Windows Server 2003 ClusterRecover utility to reset the server cluster check points.
I've not tried it because I don't know if this is the correct solution or if it will work or not.
Can I even solve the error without using the above utility? I also cannot afford to reinstall the clustering or SQL server. :mad:
Thanks in advance. :)
View 1 Replies
View Related
Nov 19, 1999
11/19
Trying to keep out sysadmins & sa during/between database RESTORE
Configuration:
WINNT Server Enterprise 4.0 w/SP5
SQL Server 7 Enterprise & SP1
2 SQL Servers:
Production Server
Standby server
I Backup (full backup) databases to disk on primary server (logical backup devices are physicaly located on a Standby server (dedicated gigabit NIC in each server for this process). Transaction logs are applied to the Standby server throughout the day.
Problem:
How to keep out "sa" and sysadmins from a database while I'm restoring (or between restores) to a standby server?
The database being restored cannot be in use during a restore.
If a DBA forgets that this process is happening, the statement fails (RESTORE)for the database they happen to be in at the time of the restore.
Example restore statement:
Standby Server -
RESTORE DATABASE databasename FROM database_dd WITH DBO_ONLY, REPLACE, STANDBY = 'g:Mssql7FromPrimaryDatabaseName_undo.ldf'
I could restrict Domain sysadmin access and change sa password. I could also put the database in "Single user" mode, however this could become problem if my process disconnects and then someone else connects - then my process is locked out. What I'm really looking for is to lock out all activity for a database that is in "standby mode" except for RESTORE processes.
Any ideas??
Wade
wadej@vailresorts.com
View 1 Replies
View Related
May 9, 2012
I'm taking a database(read-only) backup from one server and restoring it on other server. As soon as restore is done it is bringing database into single-user read-only mode.
why it is bringing the database into single user mode ?
View 1 Replies
View Related
Nov 15, 2006
Hello,i am in great trouble. I want to revert back to original state ofdatabase before i performed restore database on my sql server 2KDatabase. Accidently i didn't take backup of my Database and i didrestore, so is there any way to get the original state back of myDatabase?Any suggestion will be highly appriciated.Regards,S. Domadia.
View 2 Replies
View Related
May 7, 1999
Anybody figure a way around this:
In a development server you take a backup and you want to move the entire database to a production server. The production server does not contain the database, users, or logins in master.
When you restore the backup to production in 7.0, the users get moved to DBO because the logins do not exist and then you cannot delete them.
We are having to drop the users from the database on development, back up the database and restore it to production, then recreate the users on production.
This is bogus and did not happen in 6.5 because of the aliases.
Anybody come up with a better way?
View 1 Replies
View Related
Jul 3, 2007
I am fairly new to VS 2005 and SQL Server CE. I have developed a Desktop Windows application using VB 2005 and the SQL Compact Edition Database. This application will sell to users via web download.
When they download a service patch, or updated version, I wish for them to retain the data in their present database. In other words, fill the new database with the old data. The new table structures will remain intact except for added columns at the end.
Question is how to save the old data and update the new database with it. Is there an easy way to do this, or do I need to write a module to save a database copy, and update the new database with content at install time?
View 6 Replies
View Related
Apr 16, 2008
Hi when i try and open a database in sql server management studio i get the error "Cannot open user default database. Login failed. Login failed for user 'DOMAINUser'. (.Net SqlClient Data Provider)", what can i do to rectify this, i have googled around and still havent found no answers.
View 4 Replies
View Related
Apr 9, 2008
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
View 8 Replies
View Related
Mar 18, 2007
hi,
so i have a new box and I'm trying to get my websites and SQL Server 2005 Standard Edition working on it, but the pages give me the following error when I try to load them:
"Cannot Open Database "XXXX" requested by login. The login failed. Login failed for user 'xxx'"
Everything seems exactly the same settings and user-wise from my old box to my new one, but nevertheless everything I've tried gives me the same error.
I've tried creating new users in SQL Server and giving them appropriate permissions to my database. I've even tried just using the built in 'sa' account. Nothing seems to change the error, except when I give it the incorrect password then it just says 'login failed'
This leads me to believe that i'm successfully logging into the SQL Server, but it doesn't want to give me access to the database I'm requesting access too. But "apparently" the account i'm using should have access to the database. If nothing else the 'sa' account should, but that didn't work either.
I'm stumped. Any ideas?
View 6 Replies
View Related
Jun 17, 2007
Hey Microsoft: this affects development that will eventually sell a lot of seats on SharePoint Server 2007. If you guys and gals can't straighten out this mess, you can't expect custom solutions with custom web parts. So pay attention for your own good. Yes, SPS 2007 is what this is all about. I've created simpe web parts and deployed them, same VS 2005, but I need local development and debugging for more complex stuff. I'm really disappointed that you have no solution for this problem.
I've seen other posts on this, but the result seems to be the same: if you fix it, it's by accident, not by design.
1. I created a blank ASP.NET web site
2. I added a web part manager
3. I added a web part zone
I get the error described above. I have no idea why SQL Server settings are so screwed up.
I've tried all the stuff in the other posts - security settings, command line installation, etc. None of those worked.
The default template(s) don't copy anything into App_Data, nor create an empty folder. I don't know why that is. I have other web sites working just fine, but they use remote SQL databases, or local ones I created, and didn't need profile management (no forms authentication, no web parts, no web zones).
I've also started out with a local database, using SQL Authentication, later moving it to a remote server, and never had any problems. The SQL Server developer edition and Express seem to work just fine. I can also debug stored procs when the .mdf is in App_Data. So the problem isn't one of connectivity.
What would cause the default screw-up? This would seem to point from all directions to a problem with Visual Studio (2005)? The installation is defalt - perhaps some extras included (copy local), but nothing unusual. AJAX for ASP.net is installed, but not used in the above "default web site" trial. Likewise Syncfusion's tools, which work fine on other developer workstations at this same location, all of which are from the same image (purchased at the same time & imaged). That web parts work on other boxes, running all the same management tools (anti-virus, remote sys admin/sms etc.) makes none of those suspect.
I think Microsoft needs to have a clean problem solution and publish it. SP1 certainly doesn't fix it. What's worse is the stupid, lame error message. "I can't open the default database". Well, what did you try? What do you think the default is? What settings are you using? Why is there no debugging information other than the usual worthless trace information showing it's all deep within the ProviderBase and SqlClient namespace code? How is that supposed to be helpful?
If anyone has anything solid, not guesses, I'd like to know.
View 1 Replies
View Related
