Is it possible to restore a database with only a .bak file??
When I try to restore the system comes up with 2 paths where probably the original .mdf and .ldf files existed, but on my system they don't exist. How can I avoid this problem? (it's not possible to get the ldf and mdf files anymore...)
If a SQL 2000 server instance is destroyed, but the database file (*.mdf) is saved on the disk, can a database within a newly created server instance be built on the saved file?
If I attempt to create a new database and choose the saved mdf file as the data file, then the server refuses to accept this file. Is there a way to create the new database and make it read the standalone mdf file?
Hello, I had backed up a database from SQL 2000, just before I format my computer. Now I have installed SQL 2005 and trying to restore that database to it, it doesn't work and I get the following error when doing that
===================================
Restore failed for Server 'localhostSQLEXPRESS'. (Microsoft.SqlServer.Express.Smo)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
------------------------------ Program Location:
at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv) at Microsoft.SqlServer.Management.SqlManagerUI.SqlRestoreDatabaseOptions.RunRestore()
===================================
System.Data.SqlClient.SqlError: The backup set holds a backup of a database other than the existing '2for1' database. (Microsoft.SqlServer.Express.Smo)
------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&LinkId=20476
------------------------------ Program Location:
at Microsoft.SqlServer.Management.Smo.ExecutionManager.ExecuteNonQueryWithMessage(StringCollection queries, ServerMessageEventHandler dbccMessageHandler, Boolean errorsAsMessages) at Microsoft.SqlServer.Management.Smo.BackupRestoreBase.ExecuteSql(Server server, StringCollection queries) at Microsoft.SqlServer.Management.Smo.Restore.SqlRestore(Server srv)
I have to do a database restore from tape from a couple of months ago. When I look at the SQL scheduled task history all databases were sucesfully backed up to a .DAT file. However, when I look at the .DAT file which I have just retrieved from tape - the database which I am looking for isn't listed under the backup information, so I can't choose it to carry out the restore.
DOES ANYONE KNOW HOW I CAN RESTORE A SQL7 DATABASE WITH JUST THE DATA FILE? THERE IS NO GOOD BACKUP OF THE DATABASE AND THE LOG FILE IS MISSING. THE CLIENT THOUGHT THEY WHERE BACKING UP THE DATABASE BACKUP FILE TO TAPE, BUT THEY WHERE NOT. THE BACKUP FILE WAS BEING OVERWRITTEN EVERY NIGHT. THE LAST NIGHTS BACKUP DID NOT GET TO FINISH TO COMPLETION. PLEASE, ANY INPUT WOULD BE APPRECIATED. THANKS, TIM
I have been trying to use DMO(C++) to backup a database and then restore from that backup to a new db name AND physical data and log files, with no success. I have been able to successfully restore the backup to the same database and change the physical file names using the RelocateFiles property on the Restore object, but not change both. Any help would be greatly appreciated.
Now i must restore a database from a backup file of MS SQL Sever 6.5,but this file is bad. When i restore database from this file, SQL Server tell me that the format of this file is not file format of SQL Server 6.5.So that I must repair this backup file firstly. I don't know database file format of SQL Server 6.5.
Hello,I need to restore the Master DB in my SQL 2k server (with sp3). Theproblem is that i don't have SQL backups of this file I only havegeneral backup of the entire c: drive i made using NTBackup. So itried all I know and succesfully run the rebuildm utility. Now when Itry to restore it from the general backup (not SQL backup) using"restore database master from gen_backup" i got error: "The file ondevice 'gen_backup' is not a valid Microsoft Tape Format backup set."RESTORE DATABASE is terminating abnormally.Any ideas how I can restore it?
I have backup my database with "file and filegroup"selected. I have dropped my database by accident. is it possible to restore my data back from "file and filegroup".bak??
One of our database came to Restoring mode. I suddenly stop my SQL service and Copied only MDF files again Started SQL service ,unexpectedly i dropped the Database. Now i cant able to attach the database only with my MDF file.
I tried below Scripts. All scripts shows same error.
EXEC sp_attach_single_file_db @dbname='PhoenixPolice', @physname=N'C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLPhoenixPolice.mdf' GO CREATE DATABASE PhoenixPolice ON (NAME = N'PhoenixPolice', FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLPhoenixPolice.mdf') FOR ATTACH_REBUILD_LOG GO CREATE DATABASE phoenixPolice ON (FILENAME = N'C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLPhoenixPolice.mdf') FOR ATTACH
All scripts shows below error
File activation failure. The physical file name "F:Microsoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLDATAPhoenixPolice_1.ldf" may be incorrect.
The log cannot be rebuilt because there were open transactions/users when the database was shutdown, no checkpoint occurred to the database, or the database was read-only. This error could occur if the transaction log file was manually deleted or lost due to a hardware or environment failure.
Msg 1813, Level 16, State 2, Line 1
Could not open new database 'PhoenixPolice'. CREATE DATABASE is aborted.
Hi SQL server experts, I'm trying to restore from a backup file. I need to restore the datafile and logfile to different names. I modified the options page, changed the 'Restored As' file name. I clicked on the General page and Clicked on the Options page again, the old values came back. How do I handle this? Thanks in advance. Pingx
Hi Everybody,I use MS SQL server 2000 enterprise manager on a windows server 2003.I created a new database in enterprise manager, and try to restore the new database from a .bak file. I went to ---->restore database. I checked "from device" and select the right path to the .bak file.Then I click ok, but there is an error pop up." tend to override existing database", so I went to --->option, and checked "force override existing database". then I click ok, but get an error look like this http://ewwa.lo7.net/error.JPGI thought it was a problem with my .bak file. So I try to use another .bak file which I am sure it is 100% good. It prompt the restore is sucessfully. But when I checked the db, there nothing there(No tables).I think there must be something wrong with my enterprise manager's configuration.Do you know what happen with my enterprise manager? Thank you a lot in advance:)!!
Our SQL database log file got physically deleted. Now the database is in suspect mode. Is it possible to recover / restore the database just with the data file.
I have a user database which has 1 data file and 1 logfile. I did a complete backup of the database to a file on the disk drive, using Enterprise manager. Due to some reason, I had to drop the database. The only way I could restore it was by, 1. Create the database with the same name. 2. Restore the complete backup from the file device.
While doing so, I get the message "Backup set holds the backup of daatabase other than the existing 'userdbname' database. BAckup terminating."
Is it because the database was dropped and recreated. If I choose the option to overwrite, it restores successfully.
Is this normal and right way to do it? Is there any thing else that I need to take care of, while backup or restore?
Hi. I've following problem: - Customer played with his logical drives in a CPQ smart array - He played too much: he lost the drive with the LDF-File - Now the SQL-Server is in a kind of wired mode; you can start and stop it, but you cannot connect to (neiter 'sa' nor any other user available before) In fact the mode is not wired: what shall he do other when most important file is missing... :o - The problem for me now is:
> How can I get the Enterprise Manager or Query Analyzer up and running again to start a restore?
PS: The restore is to be done from a tape-library running Veritas Backup Exec + SQL-Agent
PPS: Error-log says (what I already know): 2005-10-04 17:18:02.69 spid11 Device activation error. The physical file name 'H:DEVLOG1DEVLOG1.ldf' may be incorrect.
hi i have restore database use backup file in another machine of same name of database there following error
TITLE: Microsoft SQL Server Management Studio ------------------------------
Restore failed for Server 'database name'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The backup set holds a backup of a database other than the existing 'dbname' database. RESTORE DATABASE is terminating abnormally. (Microsoft SQL Server, Error: 3154)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=3154&LinkId=20476
I am confused regarding why the default behavior of this option is to use file no 1 if the option is not specified? If I take two backups on different days, weeks, months, etc. and write them to the same Backup set, the second and most recent backup by the way gets the higher file number (position) as one would expect. What is incomprehensible to me is why the decision was made to restore the oldest backup from the backup set if you do not specify with file no? Seems like common sense that I would NEVER want to restore the oldest backup by default and would most-likely always want to restore the most recent backup by default!
If anyone has suggestions on how I could suggest that the behavior of this option be changed, I would appreciate it, as this has caused me much pain.
Hi everybody, On executing the RESTORE command of SQL Server to restore from a backup of 78.3 MB, the "Server Application Unavailable" error message comes up.The error message in the Application log is as follows:aspnet_wp.exe (PID: 2184) was recycled because memory consumption exceeded the 152 MB (60 percent of available RAM). However using Query Analyser of SQL Server I am able to restore the database. What is the solution to this problem?
I can run this example from SQL Book Online from sql query analyzer. I can build the TestDB database.
BACKUP DATABASE Northwind TO DISK = 'c:Northwind.bak' RESTORE FILELISTONLY FROM DISK = 'c:Northwind.bak' RESTORE DATABASE TestDB FROM DISK = 'c:Northwind.bak' WITH MOVE 'Northwind' TO 'c: est estdb.mdf', MOVE 'Northwind_log' TO 'c: est estdb.ldf' GO
But... When I build stored procedure and call it through VB6. I've got the gray database symbol along with message TestDB (Loading/Suspecting) Why I cannot run these commands through VB6
I created a dummy database (TomsTest) and then I try to restore my other database "DEV" to it.Normally, you have to use the Move for both the mdf and ldf files to tell it to restore to another database.But the message I am getting is: The file 'D:SQLDataTomsTest.mdf' cannot be overwritten. It is being used by database 'TomsTest'.
USE [master] RESTORE DATABASE [DEV] FROM DISK = N'D:SQLBackupDEV_backup_2014_05_28.bak' WITH FILE = 1, MOVE N'Dev' TO N'D:SQLDataTomsTest.mdf', MOVE N'DEV_log' TO N'D:SQLDataTomsTest_log.ldf', NOUNLOAD, REPLACE, STATS = 5
Of course it is in use, that's always the case. Even if I put it in single use mode, it still doesn't work.I tried it on another machine and had the same problem. Not sure why. If I call it the same name, it works fine but I don't want to overwrite the original database, I just need to get some data from the backup.
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET. I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share. It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page. Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer. Cheers ~ J
I should restore a SQL Server 2005 Database from backup. The backup contains three files, named user.bak0, user.bak1 and user.bak2.
How is the syntax of the restore filelistonly and the restore database ... ?
I usualy write restore filelistonly from disk = 'path and filenam.bak' restore database. zy from disk = 'path and filename.bak' with replace, move..... move....
This works but I cannot use it with a splitted backup file. The files are much too big to put together to one file.
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
My customer got a total hard drive failure.After sending it to drive recovery specialist we were able to recover the LDF log file (MyDB_0.LDF).But the MDF file was completely destroyed (MyDB.MDF).They have a good full backup from a month ago.
1) Installed SQL Server 2012 on a new PC 2) Created a new database of same name (MyDB) - with same MDF and LDF file names as original 3) Took the new database offline 4) deleted the MDF and LDF files of the new database 5) put "MyDB_0.LDF" in the place of the LDF file I just deleted 6) put the database back on-line 7) after hitting F5 to refresh databases - it shows "MyDB (Recovery Pending)" 8) tried to do Tail Log Backup with this command BACKUP LOG [MyDB] TO DISK = N'C:BACKUPMyDB_TailLog.bak' WITH NO_TRUNCATE
And I get this error...
Msg 3447, Level 16, State 1, Line 3 Could not activate or scan all of the log files for database 'MyDB'.
The sad thing is I know we can get this data back using ApexSQL-Log. I can see all the transactions since the last full backup in this program - so the log file is not damaged. But my client doesn't want to pay the $2000 fee for this software.There has to be a way to restore this data, without having to purchase a third party tool.
yes,I have an error, like 'The database file may be corrupted. Run the repair utility to check the database file. [ Database name = SDMMC Storage Cardwinpos_2005WINPOS2005.sdf ]' .I develope a program for Pocket Pcs and this program's database sometimes corrupt.what can i do?please help me
Trying to keep out sysadmins & sa during/between database RESTORE
Configuration: WINNT Server Enterprise 4.0 w/SP5 SQL Server 7 Enterprise & SP1
2 SQL Servers: Production Server Standby server
I Backup (full backup) databases to disk on primary server (logical backup devices are physicaly located on a Standby server (dedicated gigabit NIC in each server for this process). Transaction logs are applied to the Standby server throughout the day.
Problem: How to keep out "sa" and sysadmins from a database while I'm restoring (or between restores) to a standby server? The database being restored cannot be in use during a restore. If a DBA forgets that this process is happening, the statement fails (RESTORE)for the database they happen to be in at the time of the restore.
Example restore statement: Standby Server - RESTORE DATABASE databasename FROM database_dd WITH DBO_ONLY, REPLACE, STANDBY = 'g:Mssql7FromPrimaryDatabaseName_undo.ldf'
I could restrict Domain sysadmin access and change sa password. I could also put the database in "Single user" mode, however this could become problem if my process disconnects and then someone else connects - then my process is locked out. What I'm really looking for is to lock out all activity for a database that is in "standby mode" except for RESTORE processes.
I know allot of folks are having this problem and I tried lots of things but nothing works. I understand the problem is coping the SQL Express on another server is the problem - I just not sure what to do?
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
This is the last statement on the Stack Trace:
SqlException (0x80131904): An attempt to attach an auto-named database for file e:wwwdata81d0493fwwwApp_DataTestDatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
I checked my server forum and they said I had to name a database: Example: Database=(unique name);
But this didn't work either.
I just tried a simple web project that has only one database and one table in SQL Express with one sqldatasource and one datagrid. It works fine on my pc but when I use the copy function in Visio Studio 2005 Pro - I can't run the site on the remote server: www.myjewelrydirect.com
I tried coping the database manually. I tried disconnecting the database before I copy it. Below is my connection statement:
Database file or filegroup method was used to perform the backup and now i tried to restore that into different server by using SQL Server Enterprise Manager.
I got this error message:
"The database you are attempting to restore was backed up under a diffrent sort order ID (54) than the one currently running on this server (52), and at least one of them is a non-binary sort order. Backup or restore operation terminating abnormally."
Why i got this error message? And what is "backed up under a diffrent sort order ID (54)" ?
My backup file is BAK FILE and it's in D:MSSQL7/Backup/Sales.BAK.
I want to restore that into a different server in D Drive. For that i created a database called "RestoreB". (RestoreD_Data.MDF and RestoreB_Log.LDF). I tried to restore using Enterprise manager, but i got error message.
"File 'Sales_BAK' is not a database file for database 'RestoreB'. Backup or restore operation terminating abnormally'
How do write the statement to restore that file? Anyone can help me to restore that file...