I have inherited a SQLS erver 2000 instance where the client never
implemented a backup startegy for the "master" and "msdb" databases.
MSDB is now showing errors and my only option for a restore is from a
tape backup of the server.
Any thoughts..
Hello,
I would like to restore SQL Server Express and its databases from a tape backup to the same server. This is a disaster recovery senario.
I backed up the Master, Model, MSDB and my own test database using SQLCMD scripts. I have no problem restoring these using task scheduler on the server before the disaster recovery.
However, in my real disaster recovery testing, When the server is restored by tape drive (HP one button disaster recovery), I try to run my SQLCMD restore scripts in task scheduler and I cannot connect to the sql server. Also I cannot connect with Management studio. I have recieved the following error in event viewer.
----------------------------------------------------------------
Event Type: Error
Event Source: MSSQL$SQLEXPRESS
Event Category: (2)
Event ID: 3411
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
Data:
0000: 53 0d 00 00 15 00 00 00 S.......
0008: 16 00 00 00 43 00 4f 00 ....C.O.
0010: 50 00 4c 00 45 00 59 00 P.L.E.Y.
0018: 4e 00 45 00 57 00 53 00 N.E.W.S.
0020: 5c 00 53 00 51 00 4c 00 .S.Q.L.
0028: 45 00 58 00 50 00 52 00 E.X.P.R.
0030: 45 00 53 00 53 00 00 00 E.S.S...
0038: 00 00 00 00 ....
Event Type: Warning
Event Source: SQLBrowser
Event Category: None
Event ID: 3
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The configuration of the AdminConnectionTCP protocol in the SQL instance SQLEXPRESS is not valid.
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7024
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The SQL Server (SQLEXPRESS) service terminated with service-specific error 3411.
C:Program FilesMicrosoft SQL Server90ToolsBinn>sqlcmd -S.SQLExpr
COPLEYNEWSDATABASEscriptsMASTERFULLRESTORE.sql"
HResult 0x2, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred whi
shing a connection to the server. When connecting to SQL Server 2005,
re may be caused by the fact that under the default settings SQL Serve
allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
----------------------------------------------------------------------
My question is, what is the correct procedure to follow when I want to do a disaster recovery and restore SQL Server Express from tape backup using the Simple Backup method and scripts.
Is it always required to reinstall sql server express from the original program file or is it possible to reinstall from back up tape.
I know my backup and restore scripts work because I tested them on the server before I do the disaster recovery and rebuild that server from tape.
This is some kind of issue with SQL Server Express being restored by tape backup.
Any suggestions, thanks.
Does anyone know if it is at all possible to restore a single database from tape if no backup jobs have been ran or setup for this database. However, the server itself has been backuped to tape. So I would like to restore this database from the server tape backup. If so, how do I accomplish this?
View 1 Replies View RelatedHi,
I am trying to build a test environment for our production server. I backedup and restored all my databases. I had to copy the jobs too, so I backedup and restored msdb database. When I try to change any of the jobs, I get the following message.
"Error 14274: Cannot add, update, or delete a job (or its steps or schedules) that originated from an MSX server."
I have no clue what this message is about. Can someone please provide me with some clues about how I can modify my jobs and get my test environment to work.
Thanks,
Rob
I need some data from msdb.dbo.sysjobs and msdb.dbo.sysjobhistory but I need it from a backup file.
I don't need to restore the msdb database, I just need some data from the backup. Everytime I try to restore it under some innocuous name like bills_db it tells me msdb is in use.
Is there a way to restore this db to some other name and retrieve data from it?
QUESTION? ----!!!!!
I BACKED MSDB TO A DEVICE AND THEN RAN THE FOLLOWING CODE ON ANOTHER SERVER:
RESTORE FILELISTONLY
FROM DISK = 'd:mssql7ackupcomplete_bak.bak'
RESTORE DATABASE Test_MSDB
FROM DISK = 'd:mssql7ackupcomplete_bak.bak'
WITH MOVE 'MSDBData' TO 'd:mssql7datamsdbDATA.mdf',
MOVE 'Northwind_log' TO 'd:mssql7datamsdbLOG.ldf'
I get the following error: (Why are the logical and physical name referring to master database?)
LogicalName PhysicalName Type ...1
-------------- ------------------------- ----------- ...2 continued
master F:MSSQL7DATAMASTER.MDF D ...3 below
mastlog F:MSSQL7datamastlog.ldf L ...4
1... FileGroupName Size MaxSize
2... --------- --------- ----------
3... PRIMARY 11206656 35184372080640
4... NULL 1310720 35184372080640
(2 row(s) affected)
Server: Msg 3234, Level 16, State 2, Line 3
File 'MSDBData' is not a database file for database 'Test_MSDB'.
Server: Msg 3013, Level 16, State 1, Line 3
Backup or restore operation terminating abnormally.
-------------------------------------------------------------------------
QUESTION? -- WILL BACKING UP MSDB AND RESTORING IT TO ANOTHER SERVER MOVE
ALL MY JOBS AS WELL? IF NOT HOW DO I MOVE MY JOBS FROM ONE
SERVER TO ANOTHER?
I restored msdb on another server after moving all user databases and logins. I expected to see the jobs after the restore but I didn't.
I've read the article(Q314546) about moving databases and it indicates that you don't have to script them if you move msdb.
I didn't restore master. Only msdb.
Your thoughts please?
Sidney
I have a server attached to a SAN, all user db's are on the SAN, master, tempdb, and msdb are on the local machine. We will be replacing the machine (not the SAN) to a newer sql server. Our plan was to create the new server with same name, deattach current user db's,backup master and msdb, then connect new server with same name an IP to SAN. I then wanted to restore the master and msdb db's to the new machine, and attach the user db's. We are running log shipping to a stand-by server in this configuration. I was thinking I could let last tran log backup and copy occur, and then let the last restore happen on the standby. I would then shut down the agent. Should I not be able to restore the MSDB and master to the new server (as long as all file folder locations are the same) and be ready to go? Or are there issues when restoring the Master and MSDB to a new server from a different server.
View 5 Replies View RelatedHi,
Does Any one know How to find out How much space left in a Tape Drive?
Is it possible with Win nt OR Win 2000?
or It required some special utility.
Any one know please suggest,
Thanks
Nil.
Hi
I Have 8 small databases around 10 to 30 MB each.
I am taking tape backup. Full database backup Daily.
Now problem i am facing that i am not able to schedule this process because
when it complete one database backup, tape automatically come out. So
due to this reason i am not able to schdule this job.
If any one has solution for this please suggest.
Thanks.
Nil.
Hello,
I need to backup the database to file and then copy it to Tape. Can anyone guide me how I should do it. I need to automate it.
Thanks.
Rea
We have Dell Optiplex GX1 PCs with Seagate ST22000 IDE tape backup devices, running NT Workstation or NT Server and SQL 7.0 with SP1, NTSP5.
SQL 6.5 will backup successfully to these devices, but SQL 7.0 will not.
The most common error message is 18257, Device or media does not support ...
42000 Syntax error, permission violation, or other nonspecific error...
I am trying to backup a database to a tape. It works when it wants to. I get a 3013 error. The drive is fully functional. Seagate backup works fine. SQL Backup does not. I think it might be that the tape needs retensioning sometimes. Here is the sql statement: BACKUP DATABASE pubs TO TAPE='.ape0' WITH FORMAT. Is there a retension parameter I am failing to see?
View 2 Replies View RelatedHi Folks,
I have a SQL Server 7.0 with and exteranl SCSI tape device.
When I attempt to backup a database in EM the tape device is being greyed out.
I have add the backup device using sp_dumpdevice and made sure that it is in sysdevices table. It will not allow me to add this backup device from the drop down.
1. Why does EM not see this device ?
2. If I try to back this up using T-SQL will I be able to use the registared tape device.
Thanks Folks
I want to create a backup device for the tape drive.
So I go in "Server Objects"=>"Backup Devices" and create a new device. Problem is: In "Destination" I can't select "Tape:".
The ntbackup.exe program recognizes the tape drive, but SQL2005 not.
I have this:
-SQL2005 Enterprise edition 64bit.
-Tape drive HP StorageWorks Ultrium 960.
Someone knows how I can create a backupdevice for the tape?
Thanks
IF Debugging = removing bugs from program THEN programming := putting bugs in program;
HiWe are running SQL 2000 Enterprice version with SP3a on a DellPoweedge 5600 server running Advance Server. It has Tape drivePowerVault 110T (DLT VS80 Tape Drive) & uses DLT tapeIV tapes. A DBmaintenance job had been specified to backup on to tape daily. I havefollowing issues;1.The backup job sometimes fails with the following error in Eventlog(Event ID:17055)3041: Backup failed to complete the command BACKUP DATABASE [UNIQRS]TO TAPE = N"\.Tape0 WITH NOINIT, NOUNLOAD, NOSKIP, STATS = 10,NOFORMAT. The job is specified with the Verification option.2. If I try to restore a succeeded backup it asks for a initial tapewith a past date which does not exists3. Is there a way to view the content of the tape & free space etc.4. It is recommended to put a disk backup & transfer it to tape usingWindows backup utility. Is there a way to automate this by initiatingthe Backup utility when the SQL finishes the disk backup.ThanksChirath
View 2 Replies View RelatedI've got a new HP ML370 G4 Server 2003 SP1 with a fresh install of SQL 2005 SP1. I'm trying to create a backup device for the internal HP DAT 40 and tape is greyed out as an option. I have the newest HP software drivers and firmware. The tape drive is seen by Server 2003 device manager and by NTBACKUP. I can backup using that program. Why doesn't SQL 2005 see it? I tried a new HP Ultrium tape drive with the same results. Anyone else see this and can recommend a fix? TIA
View 11 Replies View RelatedHello,
I am trying to configure the backup device on SQL Server 2005.
I cannot get the Tape device list.
The Tape Device is attached physicaly to the server ! (IBM Ultrium-TD3 scsi). I can 'see' the device using Windows Backup; but I cannot even get the list of tapes on SQL Server.
Can you please give me some help on this one ?!
Thank you all.
Youss
Hello,
TSQL command works fine,
C:SQLCMD
1> BACKUP DATABASE TestDB TO TAPE = '\.Tape0'
2> GO
but how to append more than one databases( SQL 2005) to the same tape.
Having said this, what is the solution for " I've got a new HP ML370 G4 Server 2003 SP1 with a fresh install of SQL 2005 SP1. I'm trying to create a backup device for the internal HP DAT 40 and tape is greyed out as an option .........." Pls advice me.
Hello!
Me and my collegues was recently assigned to maintain a SQL Server 2000 instance, which pretty much only holds one database.
From what we can tell, a backup of this database has never been created, atleast not through SQL Server.
When asking the previous owner, the answer was "We have been taking 'Legato backups' every day!"
We now intend to schedule a SQL Server backup job, but out of curiosity...
In case of a disaster, would these "Legato backups" have been any use at all?
Please elaborate :-)
How does one correctly go about restoring the MSDB database?
How/what should I do with the status (loading)?
I have a good backup of the MSDB.
Any help will be appreciated.
Hi,
How do we know that tape backups is working. And how do we know what is on them.
dindu
My company is using backup exec to bacup all servers and when it came to this particular server these backups were skipped. I checked the log files and backups that are ran within SQL. Can someone explain to me what may have caused this. My guess is that there was something with the media that was trying to backup this server. Thanks for all of you help.
Below is the error message that was recieved after backup exec attempted to backup up this server.
Media Name: "DIFF"
Backup of "SQLserver1E$ "
Backup set #49 on storage media #1
Backup set description: "Daily 5"
Backup Type: DIFFERENTIAL - Changed Files
Backup started on 11/05/2001 at 11:46:00 PM.
The item MSSQL7Datadatabase1_Data.MDF in use - skipped.
The item MSSQL7Datadatabase1_Log.LDF in use - skipped.
The item MSSQL7Datadatabase2_Data.MDF in use - skipped.
The item MSSQL7Datadatabase2_Log.LDF in use - skipped.
The item MSSQL7Datamaster.mdf in use - skipped.
The item MSSQL7Datamastlog.ldf in use - skipped.
The item MSSQL7Datamodel.mdf in use - skipped.
The item MSSQL7Datamodellog.ldf in use - skipped.
The item MSSQL7Datamsdbdata.mdf in use - skipped.
The item MSSQL7Datamsdblog.ldf in use - skipped.
The item MSSQL7Dataorthwnd.ldf in use - skipped.
The item MSSQL7Dataorthwnd.mdf in use - skipped.
The item MSSQL7Datapubs.mdf in use - skipped.
The item MSSQL7Datapubs_log.ldf in use - skipped.
The item MSSQL7Datasysdev_Data.MDF in use - skipped.
The item MSSQL7Datasysdev_Log.LDF in use - skipped.
The item MSSQL7DataTEMPDB.MDF in use - skipped.
The item MSSQL7DataTEMPLOG.LDF in use - skipped.
Access denied to directory emp.
^ ^ ^ ^ ^
Backup completed on 11/05/2001 at 11:47:02 PM.
Backed up 55 files in 48 directories.
19 items were skipped.
Processed 84,537,951 bytes in 1 minute and 2 seconds.
Hi,
we have backups taken regularly on tape device.
When I restore the back up on the same server,it is working.
But if I try to resotre the same backup on a new server it is giving problems
I have the same configuration of the new and old server.
It is giving error 10005 DB process dead and after that the database is marked grey and in bracket (loading)
and a lot of other errors like Begin Stack Trace,
sympton dump created,end stack trace ,etc( A very Long List of errors) and a new dump is created in log directory
It is also telling "EXCEPTION_ACCESS_VIOLATION"
i am having the same problem on all the servers we have.
Help me regarding this.
DP
How much time does a 20 g tape backup take to recovery
I am on 6.5 sql and have compacq 15/30 gb DLT
How best to configure a standby sqk 2000 server
salim
__________________
Hi
I am having some trouble with our Veritas Backup Exec not properly releasing db backup files, & thus interfering with the deleting of old backups.
We have other servers still needing tape backups implemented and
I wonder if anyone has a good backup software/hardware system to recommend, that is ideal for database backups, & on the hardware side is reliable?
Anyone have any to recommend?
thx
Des
i have taken full database backup on tape drive one week ago,by automated scripts ,now when i check the maintenance plan history , it says the task failed and gives a message that unable to open the \. ape0 ,with error
([Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 3201: [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open backup device '\. ape0'. Device error or device off-line. See the SQL Server error log for more details.
[Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP DATABASE is terminating abnormally.
)
Environment: Win Server 2003 Standard Version, SQL Server 2000, HPDDS3 Tape(local).Backup procedure:1. open SQL Server Enterprise Manager2. find the database i want to backup3. right click and select "All Tasks"-"Backup Databse..."4. Select "destination"-"backup to"-->>"Tape"5. Click "Add", Select "Tape" device name(or may address)"\.Tape0"6. Click "OK" begin to backupError:system prompt:The file on device '\.Tape0' is not a valid Microsoft Tape Formatbackup set. BACKUP DATABSE is terminating abormally.On this SAME server, using the same TAPE, but USE Tapeware(a HP backupsoftware come with HP tape machine) to back file, everything is OK.I don't have any clue about this. am new to Windwos, new to SQLserver. Any body could show me light? Thanks in advance.A.Y. From shanghai/China
View 6 Replies View RelatedSuddenly one day I found some corruptions have occurred in my SQL Server 2012 installation. Because my 'msdb' has been marked SUSPECT/CORRUPT; hence no new work can be done as per my schedules.
I have gone about trying to repair it. I followed this article here: [URL] [the region 'Create new MSDB Database'].
I am facing some sizeable difficulties in doing this on my own. Steps 1. & 2. I have done. I am now stuck at step no. 3.My instance name is SQLEXPRESS. So, when I give,
SQLCMD -E -S<SQLEXPRESS> -dmaster -Q"EXEC sp_detach_db msdb" [as per the article], what I get is:
The System cannot find the file specified.
So I am stuck at that point. What's with the 'cannot find file specified'? The stored procedure, or the mdf, ldf files for my msdb? What is it?Also, if and when I am through with step no. 3 I would like to know about steps 5. & 6. also which are soon to follow [like how to do them correctly, safely and from where, the different options]. This is a huge priority for me to get my sql server up and running again because I can't do my other coding works without it. Everything is stalled. Slowly reaching the desperation, SOS mode..
Hi
I have two database called test1 and test2 both are of same size(both device and log). I run the following statements to take the backup of both the databases using the tape device 'tapedevice1'. dump database test1 to 'tapedevice1'
dump database test2 to 'tapedevice1'
After this I run the load statement
load database test2 from 'tapedevice1'.
It just restore the database test2 with test1 data which is added first to the tape with a warning.
Is there any restriction that in a single tape backup of more than one database is not possible.
Your valuable suggestion appreciated
Jiji
Does anyone know if it is possible to have a tape device another server as a tape dump device on SQL. Instead on removing the tape drive and installing it locally ?!?
Regards
Jasper
Need help.
We lost (Couldn't find ) the full backup on a Tape we were supposed to use for restore, but seems like they lost it. All we have is a Diff backup. Wondering if that is any good at all .
Please help
Thanks
First posting to the group. I have received a lot of valuable info from youguys. Now, an OT question:What's a good tape drive to perform unmanned weekly backups for a WindowsXP Pro box running SQL server 2000?--Joel Farris | AIM: FarrisJoel** Their Web. Your Way. http://getfirefox.com **
View 1 Replies View Related