Restoring Multiple Databases From A Single Backup
Jan 16, 2008
I have a backup that contains multiple databases. I am restoring it to a different server. How do I restore each database? Tried to restore under SQL Server Management Studio, but can only restore one of many from the backup (it appears it has only 1 logical file name in the backup) If you can refer me to a web page that would be great. I tried googling the topic but nothing seems to come up.
View 5 Replies
ADVERTISEMENT
Oct 24, 2013
I have a single .bak file containing full backups of 20+ databases.
Whats the best way of creating and restoring these database onto an instance on a separate server.
note that this is to migrate the whole instance of sql server onto a newly build server.
View 1 Replies
View Related
Nov 9, 2006
Hi,
I want to create two databases by restoring from a
single backup file in sql server. I am using 2005-sqlexpress .Is it possible?
Thanx in advance..
View 3 Replies
View Related
Sep 15, 2006
Hello,
I would like to restore SQL Server Express and its databases from a tape backup to the same server. This is a disaster recovery senario.
I backed up the Master, Model, MSDB and my own test database using SQLCMD scripts. I have no problem restoring these using task scheduler on the server before the disaster recovery.
However, in my real disaster recovery testing, When the server is restored by tape drive (HP one button disaster recovery), I try to run my SQLCMD restore scripts in task scheduler and I cannot connect to the sql server. Also I cannot connect with Management studio. I have recieved the following error in event viewer.
----------------------------------------------------------------
Event Type: Error
Event Source: MSSQL$SQLEXPRESS
Event Category: (2)
Event ID: 3411
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
Data:
0000: 53 0d 00 00 15 00 00 00 S.......
0008: 16 00 00 00 43 00 4f 00 ....C.O.
0010: 50 00 4c 00 45 00 59 00 P.L.E.Y.
0018: 4e 00 45 00 57 00 53 00 N.E.W.S.
0020: 5c 00 53 00 51 00 4c 00 .S.Q.L.
0028: 45 00 58 00 50 00 52 00 E.X.P.R.
0030: 45 00 53 00 53 00 00 00 E.S.S...
0038: 00 00 00 00 ....
Event Type: Warning
Event Source: SQLBrowser
Event Category: None
Event ID: 3
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The configuration of the AdminConnectionTCP protocol in the SQL instance SQLEXPRESS is not valid.
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7024
Date: 9/15/2006
Time: 8:16:36 AM
User: N/A
Computer: COPLEYNEWS
Description:
The SQL Server (SQLEXPRESS) service terminated with service-specific error 3411.
C:Program FilesMicrosoft SQL Server90ToolsBinn>sqlcmd -S.SQLExpr
COPLEYNEWSDATABASEscriptsMASTERFULLRESTORE.sql"
HResult 0x2, Level 16, State 1
Named Pipes Provider: Could not open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred whi
shing a connection to the server. When connecting to SQL Server 2005,
re may be caused by the fact that under the default settings SQL Serve
allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
----------------------------------------------------------------------
My question is, what is the correct procedure to follow when I want to do a disaster recovery and restore SQL Server Express from tape backup using the Simple Backup method and scripts.
Is it always required to reinstall sql server express from the original program file or is it possible to reinstall from back up tape.
I know my backup and restore scripts work because I tested them on the server before I do the disaster recovery and rebuild that server from tape.
This is some kind of issue with SQL Server Express being restored by tape backup.
Any suggestions, thanks.
View 5 Replies
View Related
Dec 12, 2014
With all the new functionality, can 2014 now restore a single table from a standard backup without using any third party tools? I have looked, but can't see this listed as a feature (though that doesn't mean it's not there, maybe I've just missed it).
View 6 Replies
View Related
Apr 17, 2007
I'm building an app that will data stored in multiple databases. I have an endpoint with a single webmethod like so:
CREATE ENDPOINT [Rosters_Endpoint]
AUTHORIZATION [ADHEadministrator]
STATE=STARTED
AS HTTP (PATH=N'/SQL/Rosters', PORTS = (CLEAR), AUTHENTICATION = (DIGEST, NTLM, KERBEROS, INTEGRATED), SITE=N'10.0.1.116', CLEAR_PORT = 8080, COMPRESSION=DISABLED)
FOR SOAP (
WEBMETHOD 'GetACSStudents'( NAME=N'[fadb].[dbo].[GetACSStudents]'
, SCHEMA=DEFAULT
, FORMAT=ALL_RESULTS), BATCHES=DISABLED, WSDL=N'[master].[sys].[sp_http_generate_wsdl_defaultcomplexorsimple]', SESSIONS=DISABLED, SESSION_TIMEOUT=60, DATABASE=N'fadb', NAMESPACE=N'http://tempUri.org/', SCHEMA=STANDARD, CHARACTER_SET=XML)
Each webmethod will be accessed thru a multiview on the page.
It would seem to me that I can describe the webmethods using a fully qualified stored proc name and that wouldn't cause a big problem. But, my question is what does that DATABASE=N'fadb' clause do?
Does anybody see a problem with using a single endpoint to access multiple databases?
Any advice would be greatly appreciated as this is my first web app using this data access method.
Thanks.
View 1 Replies
View Related
Apr 25, 2008
HI Guys,
I just need to add multiple catalogs to the same linked server, in Sql Server 2000 or Sql Server 2005. Here i need only to add 3 databases in to a single linked server name.
Thanks In Advance,
Krishna
View 1 Replies
View Related
Jun 17, 2008
Hi, I'm planning to develop a project on .NET using Sql server 2005. Just stuck at a point where I need to decide that Should I use 2 or 3 huge databases with a lot of tables and data into it or should i create a lot of databases which would contain small chunks of data. Please let me know which option would give me a better performance. Thanks in advance
God is great. We are not God. But we still can be great.
View 2 Replies
View Related
Jul 7, 2007
Can someone explain what does this mean? This is from http://www.microsoft.com/technet/prodtechnol/sql/2005/dbmirror.mspx
<quote>However, all these techniques for coordinating client redirection with a database mirroring have an important limitation. Database mirroring occurs only at the database level, not the server level. Be careful if your application relies on querying several databases on a server, or uses multi-part object names to query across several databases. When several databases reside on one server, and they are mirrored to a standby server, it is possible that one of several databases might fail over to the standby but the others remain on the original server. In that case, you might need one connection per database that you are querying, so that you do not attempt cross-database queries on a standby server where only one database is a principal and the remaining are mirrors.</quote>
Also I read somewhere that if one mirrored DB fails, all other mirrored DB should also be transferred to the mirror.
For example: Let's say Srv1 (principle) and Srv2 (mirror) and Srv3(witness) are SQL servers with only default instances. The SQL instance has 4 DBs (DB1, DB2, DB3, DB4) and all of them are mirrored to Srv2.
An ASP.NET application has four seperate connection strings like:
objConn1 --> Data Source=Srv1;Failover Partner=Srv2;Initial Catalog=DB1;Integrated Security=True;
objConn1.connect();
objConn2 --> Data Source=Srv1;Failover Partner=Srv2;Initial Catalog=DB2;Integrated Security=True;
objConn2.connect();
objConn3 --> Data Source=Srv1;Failover Partner=Srv2;Initial Catalog=DB3;Integrated Security=True;
objConn3.connect();
objConn4 --> Data Source=Srv1;Failover Partner=Srv2;Initial Catalog=DB4;Integrated Security=True;
objConn4.connect();
If DB2 failsover to Srv2 (mirror), why should all other DBs be failedover?
Thanks
View 10 Replies
View Related
Mar 5, 2007
Alright, here's the deal. I'm testing some backup/restore strategies, and hitting a (slight) sticking point.
We've got collections of database and log backups created by the usual maintenance plans on a 2000 Enterprise machine. I'm trying to run through a restore onto a new 2005 machine (Developer Edition on my test workstation) using the collection of .bak and .trn files copied from the 2000 server. When I try to restore to a new database on 2005 via SSMS, and select all the .bak and .trn files for the restore, I get the ol' "The volume on device '[trimmed]' is not part of a multiple family media set. BACKUP WITH FORMAT can be used to form a new media set." error.
I'm assuming this just means that SQL Server can't verify that these log backups are in fact part of a functional "set", even if they aren't part of a traditional backup media set. Is there any way to tell SSMS, "It's okay man, just restore the database from these files, in this order - trust me," or is the only solution restoring every individual log file one at a time? (Which seems to work fine, though is a tremendous pain with any more than a few log backups.) Seems like there ought to be a good one-shot method to restore a bunch of backups to a different server, and I'm just not finding it.
View 4 Replies
View Related
Jun 10, 2014
I have to mirror 3 DBs on my sql server instance . I have restored there full backups and log backups on mirror.I have also created endpoints on principal and mirror using default ports 5022 and 5023.
know if i can use the same endpoint for the databases on principal instance ?
View 3 Replies
View Related
Jan 13, 2015
I have multiple databases in the server and all my databases have tables: stdVersions, stdChangeLog. The stdVersions table have field called DatabaseVersion which stored the version of the database. The stdChangeLog table have a field called ChangedOn which stored the date of any change made in the database.
I need to write a query/stored procedure/function that will return all the database names, version and the date changed on. The results should look something like this:
DatabaseName DatabaseVersion DateChangedOn
OK5_AAGLASS 5.10.1.2 2015/01/12
OK5_SHOPRITE 5.9.1.6 2015/01/10
OK5_SALDANHA 5.10.1.2 2014/12/23
The results should be ordered by DateChangedOn.
View 4 Replies
View Related
Sep 8, 2015
I got full backup on daily schedule its taking more space on Drive because each file has more than 25GB.I am using SLQ server 2008R2 so I'm looking to take the backup with compression instead of uncompressed Backup. What are the impacts of compressed backup. Is there any problems with compressed backup while restoring the backup file.
View 8 Replies
View Related
Nov 28, 2000
I am fairly new to SQL Server and have a question about restoring a database . If a server that contained SQL Server was totally destroyed, and we have backups stored on an external server, how do we restore these backups. I am assuming I would have to install a new instance on the server we buy to replace the destroyed one. Once installed how do I convince or tell SQL Server that there are backups out there. I could move the archived backups back to the new server, but how do I point the new instance of SQL Server to these backups? Thanks in advance for any help.
View 1 Replies
View Related
Jan 10, 2007
Guys,I need to restore a database which is 400 GB plus. Usually a normalrestore from a backup file takes about 40 minutes. I have a databaseCompany on a server A. I need to use the backup of database company torestore as company1 on the same box. At the end, company and company1would reside on the same box. Is there any way to do it faster than anormal restore???Thanks in advance.RegardsJaideep
View 3 Replies
View Related
Nov 15, 2007
I try to restore a database but I receive the message "...the database is compressing. Uncompress the database and try again..."
In the original system (MSQL 2003) the backup is doing by the utility "backup"
In my personal system (MSQL 2005) I use the restore utility
Notice that I don't use winzip, winrar or other compressing software
Can anybody help me?
Thanks in advance
View 3 Replies
View Related
Jun 17, 2002
I would like to know if its OK to restore a SQL 7 user database to SQL 2000.
I have looked into Books On Line, with no success.
Anyone know where I might find some documentation on this topic?
Many thanks in advance.
Gary Andrews
View 1 Replies
View Related
Feb 14, 2006
I recently was given control of an SQL server that stop working.
We had no past backups of the database and the only file we had was the .mdf
I decided to install a fresh version of SQL 2000 on another server and created a database using enterprise manager with the same name as my database called SWATraining
I then stop the sql server
the first thing that I notice is that the .mdf that enterprise manager created had _DATA at the end of the name. Thus I renamed the the orginal .mdf SWATraining_Data and
copied it to the
C:program filesmicrosoft sql servermssqldata
when I started SQL the database was greyed out and had (suspect)labeled
How can I recover the database when the only file I have is the .mdf file??
I even tried
sp_attach_single_file_db @dbname = 'SWATraining',
@physname = 'C:Program FilesMicrosoft SQL ServerMSSQLDataSWATraining.mdf'
but reason this error
Server: Msg 5172, Level 16, State 15, Line 1
The header for file 'C:Program FilesMicrosoft SQL ServerMSSQLDataSWATraining.mdf' is not a valid database file header. The FILE SIZE property is incorrect.
View 4 Replies
View Related
Jun 20, 2007
Hello:
I'm working with two sql servers instances, ServerA and ServerB, which run under two different service accounts on different machines. They both have a database, DatabaseA, that has some encrypted fields.
If I take a backup of DatabaseA on ServerA and restore it on ServerB, I need to re-encrypt the Database Master Key (DMK) with the Service Master Key (SMK) as follows:
OPEN MASTER KEY DECRYPTION BY PASSWORD = 'pwd used to encrypt DMK'
ALTER MASTER KEY ADD ENCRYPTION BY SERVICE MASTER KEY
However, if I again take a backup on ServerB and then restore it on ServerA, I can use the DMK on ServerA without re-encrypting it with the SMK.
Shouldn't I have to re-encrypt the DMK with the SMK everytime I restore from a backup that was generated from a different server?
Thanks,
Cyndi
View 1 Replies
View Related
Dec 10, 2007
Dear Readers,Is it possible, like in Access, to link to tables in other SQL databases that are on the same server? I have a query that I originally had in Access that queered from multiply databases. It did this by having those other tables in the other databases linked to the database that had the query.
View 3 Replies
View Related
Mar 22, 2008
Hello,
Does anyone else ever experience this problem, and if so do you know what causes it:
When ever I restore a database called say XXX.mdf, it restores OK and I can view via MSE as XXX.mdf. Then when I visit MSE again there is another database called C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataXXX.mdf - both are linked to the same .mdf file, however if you try to expand XXX.mdf nothing happens as though the database has been detached?
Cheers MArco
View 3 Replies
View Related
Jul 3, 2006
I have run into problems trying to use backed-up encrypted databases. I have an ASP.Net/SqlServer 2005 website for which I have production, test, and development environments, each on its own box. I have set up encryption using Master Keys, Certificates, and Symmetric Keys using the following commands:
CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'password'
CREATE CERTIFICATE CERTIFICATE_NAME WITH SUBJECT = 'My Website'
CREATE SYMMETRIC KEY KEY_NAME WITH ALGORITHM = TRIPLE_DES ENCRYPTION BY CERTIFICATE CERTIFICATE_NAME.
All databases have the same certificate and symmetric key names. The Production database has a different password than the development and test databases.
I am running into problems when I back up the development database and try to move it to the test environment. When I do the move, and then try to access the encrypted data, I get an error "An error occurred during decryption", even though they are the "same" database (I originally detached and copied the development database to the test box when I set up the test environment) with the same password.
I then try the following commands, which I used when I brought the development database over to the test box the first time:
OPEN MASTER KEY DECRYPTION BY PASSWORD = 'password'
ALTER MASTER KEY REGENERATE WITH ENCRYPTION BY PASSWORD = 'password'
This caused the following error:
"An error occurred while decrypting certificate 'CERTIFICATE_NAME' that was encrypted by the old master key. The FORCE option can be used to ignore this error and continue the operation, but data that cannot be decrypted by the old master key will become unavailable."
So, how do you set up encrypted databases so that you can backup from one database server and restore on another? This problem will be very important when I set up a backup production database server.
View 12 Replies
View Related
Dec 27, 2007
I have a question regarding moving databases within the same server but to a different drive. Using the 'Alter Database' query transaction procedures within the SQL Server Management Studio, I'm able to take a user database offline and move it. However, when using the Alter transaction to bring the database back online, I get errors. There was also an attempt that seemed to work, but the app that uses the database through ODBC can't see the database that was moved and errors out.
How can databases be moved and connections re-established within the same server?
Thanks...
View 1 Replies
View Related
May 6, 2015
I need to backup a single DB with "Copy-only Backup" option on. I Want to place the backup on a different location, we have a media set which is used for daily backups. I want this backup placed on a different
server 192.168.250.xxx
DepartmentsITBackup2015xxx.bak
I have added this location to "back up to" The old one is still there. I I then hit OK th backup hangs for 2-3 minutes and gives me an error which points to the old media set. SO I want to create a new media set and call it "onlyonce" but what I am not sure about is what this Means "back up to a new media set and erase all existing backup sets" Does that mean all old backups will be deleted?
View 3 Replies
View Related
Feb 23, 2015
I am working on a task. Currently we are taking a database backup and keeping that backups in a folder. The backups doesn't have time stamp on it. My task is need to get the latest backup and copy that backups into some other server and then restore the database from there.I am planning to create SSIS package.Do we need script task for this task.How to get the .bak with latest create or moidified date. For now we doesn't have timestamp so need to go based on modified date?
View 9 Replies
View Related
Mar 3, 2008
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
View 8 Replies
View Related
Apr 21, 2015
I have a table with single row like below
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Column0 | Column1 | Column2 | Column3 | Column4|
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Value0 | Value1 | Value2 | Value3 | Value4 |
Am looking for a query to convert above table data to multiple rows having column name and its value in each row as shown below
_ _ _ _ _ _ _ _
Column0 | Value0
_ _ _ _ _ _ _ _
Column1 | Value1
_ _ _ _ _ _ _ _
Column2 | Value2
_ _ _ _ _ _ _ _
Column3 | Value3
_ _ _ _ _ _ _ _
Column4 | Value4
_ _ _ _ _ _ _ _
View 6 Replies
View Related
Aug 22, 2007
Hi,
I have multiple columns in a Single Table and i want to search values in different columns. My table structure is
col1 (identity PK)
col2 (varchar(max))
col3 (varchar(max))
I have created a single FULLTEXT on col2 & col3.
suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1
ON
TBL.col1=TBL1.[key]
INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2
ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information.
for e.g.;
i was thinking to concatinate both fields like
col4= ABengineBA + ABBToyotaBBA
and in search i use
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result = 1 row
But it don't work in following scenario
col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result=0 Row
Any idea how i can write second query to get result?
View 1 Replies
View Related
May 1, 2015
I was contacted by the SAN team to test backup/restore of larger databases using a split-mirror backup (BCV) or clone that is taken from production db server and copied to another sql box. They want to use this process once a week. I see the mounted drives with the data/log files. All looks good. Initially I attempted to attach the databases and received (Unable to open the physical file db.mdf Operating System Error 5 Access is denied). I manually granting SQLServerMSSQLUser$<computer_name>$<instance_name> on all of the physical files 20 total. That worked.
Since this will be weekly, the SAN team performed the copy again and now none of the databases can communicate with the newly copied files. NTFS permissions need to be set again. I'm getting (Operating System error 21: the device is not ready). Is there something that I'm missing in this process how the vendor BCV clones the data and SQL communicates with the copied files as I was thinking it would be more automated process?
View 0 Replies
View Related
May 10, 2015
Here is some data that will explain what I want to do:
Input Data:
Part ColorCode
A100 123
A100 456
A100 789
B100 456
C100 123
C100 456
Output Data:
Part ColorCode
A100 123;456;789
B100 456
C100 123;456
View 4 Replies
View Related
Sep 3, 2014
How to insert single row/multiple rows into multiple tables by using single insert statement.
View 1 Replies
View Related
Aug 25, 2000
HI everybody,
I have a problem in restoring a backup. In the restore command there is one option called <file> = 'file_number'. Where do we get this 'file_number'?.
tks in advance
Srini
View 4 Replies
View Related
Oct 11, 2001
Hi Everyone, I was prototyping a DB and made a backup of all the files in the data directory of sql server, thinking that I would be able to restore the system from another installation when I made it to the US. I have the cd with the archives on and a full backup of the DB I want but I have no idea how to get sql server to initialise it.
Any ideas???
Steve
View 2 Replies
View Related