I have a table that has arabic, japanese, utf8 and ascii strings in it. When I try and rerieve those strings using the windows odbc driver, the ascii and since byte utf8 characters come back fine, the arabic and japanese are returning as single byte characters. I read on microsofts page that odbc versions before 3.7 are considered non-unicode. When I look at the version of the odbc administrator it says 3.5. Is there a newer version of the sqlserver odbc driver or windows odbc administrator that I would need?
Is there some way to specify what the client charset is? I'm using SQLGetData with a target type of SQL_C_WCHAR.
I'm connecting to a SQL Server 2005 database using the latest (beta) sql server driver (Microsoft SQL Server 2005 JDBC Driver 1.1 CTP June 2006) from within Java (Rational Application Developer).
The table in SQL Server database has collation Latin1_General_CI_AS and one of the columns is a NVARCHAR with collation Indic_General_90_CI_AS. This should be a Unicode only collation. However when storing for instance the following String:
‚¬_£_ÙÚÜÛùúüû_ÅÆØåæøߣÇçÑñ_¼½¾_ЎўЄєÒ?Ò‘_прÑ?туф_ЂЉЊЋ ... it is saved with ? for all unicode characters as follows (when looking in the database): ‚¬_£_ÙÚÜÛùúüû_ÅÆØåæøߣÇçÑñ_¼½¾_??????_??????_????
The above is not correct, since all unicode characters should still be visible. When inserting the same string directly into the sql server database (without using Java) the result is ok.
Also when trying to retrieve the results again it complains about the following error within Java:
Codepage 0 is not supported by the Java environment.
Hopefully somebody has an answer for this problem. When I alter the collation of the NVARCHAR column to be Latin1_General_CI_AS as well, the data can be stored and retrieved however then of course the unicode specific characters are lost and results into ? So in that case the output is as described above (ie ‚¬_£_ÙÚÜÛùúüû_ÅÆØåæøߣÇçÑñ_¼½¾_??????_??????_????)
We would like to be able to persist and retrieve unicode characters in a SQL Server database using the correct JDBC Driver. We achieved this result already with an Oracle UTF8 database. But we need to be compliant with a SQL Server database as well. Please help.
Since my foxpro OLE driver has been rendered useless by service pack 1 for sql server 2005 I am forced to use the .net data provider for odbc.
I am importing a number of tables.. each time I add the DataReader Source to the dataflow and connected it to the OLE DB Destination I get a load of the good old "cannot convert between unicode and non-unicode string data types" errors...
So I'm having to do derived column transforms, for each and every column that it coughs up on.
Using expressions like (DT_STR,30,1252)receivedby to convert the "recievedby" column to a DT_STR,
Some of these tables have 100 string columns.. so I'm getting a bit sick of the drudgery of adding all these derivations...
Is there any way to tell this provider to stop deciding that the strings in the foxpro tables are unicode?
SQL Native Client 2005.90.3042.00 ODBC driver does not return SQL_CVT_DOUBLE as part of the mask from SQLGetInfo for SQL_CONVERT_WCHAR, SQL_CONVERT_WVARCHAR even though driver actually supports converting nchar and nvarchar to SQL_DOUBLE. For example,
In my package , I am used CDC Source transformation and received the Net changes then insert into Destination. But whatever Data coming from CDC source data type Varchar value needs to Converting Non Unicode string to Unicode string SSIS. So used Data conversion transformation to achieved this.  I need to achieve this without data conversion.
I am following the SSIS overview video- URL...I have a flat file that i want to import the contents onto a SQL database.I created a Dataflow task, source file and oledb destination.I am getting the folliwung error -"column "A" cannot convert between unicode and non-unicode string data types".in the origin file the data type is coming as string[DT_STR] and in the destination object it is coming as "Unicode string [DT_WSTR]"I used a data conversion object in between, dosent works very well
I have an SSIS package that pulls data from a MYSQL DB (Using RSSBus for Salesforce in SSIS to accomplish this). Most of the columns are loading properly, but I have many columns that I need to convert.
I have been using the Data Conversion dataflow task in SSIS to convert the rows.
I have 2 data conversions that work on most of the columns, but the DESCRIPTION column continues to return an error saying "Cannot convert between unicode and non-unicode types", regardless of what I choose on the Data Conversion task. So, basically I want to dump this column data into a SQL table with NVARCHAR datatypes. Here is what I am doing in my SSIS package...
1) Grab subset of data from SOURCE 2) Converts to TEXTSTREAM. (Data Conversion) 3) Converts to STRING. (Data Conversion) 4) Load Destination table. (OLE DB Destination)
I have also tried to simply convert the values to STRING, but that doesn't work either.
So, I have 2 Data Conversions working here that process most of the data correctly. What I can do to load the DESCRIPTION column?
I've had some great headaches with SSIS this morning, which I have managed to get a workarounds for, but I'm not happy with them so I've come to ask for advice.
Basically, I am exporting data from an SQL Server database into an Excel spreadsheet and hitting issues with unicode and non-unicode data types.
For example, I have a column that is char(6) and have added a data conversion step to the data flow, which converts it to type DT_WSTR and then everything works!
However, this seems like a completely un-neccessary step as I should be able to do the conversion in T-SQL - but no matter what I try I keep getting the same problem.
SELECT Cast(employee_number As nvarchar(255)) As [employee_number] FROM employee WHERE forename = 'george'
ErrorValidation error. details: 1 [1123]: Column "employee_number" cannot convert between unicode and non-unicode string data types.
I know I have a solution (read: workaround) but I really don't want to do this everytime!
I have an Excel Source component hooked to an OLE DB Destination component in my SSIS 2005 Data Flow Task. After I mapped the excel columns to the OLE DB table columns i get these errors below. I noticed that for the first error, the Excel Field format (when you mouse over the column name in the mappings section in OLE DB component) is of type [DTWSTR] and the corresponding SQL field from my SQL table that it's mapping to is of type [DT_STR] when mousing over that field in the mappings in the properties of my OLE DB component. All table fields in SQL Server for the table I'm inserting into are of type varchar.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Commission Agency" and "CommissionAgency" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Column "Product" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Officer Code" and "OfficerCode" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Agency Name" and "AgencyName" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Agency Id" and "AgencyID" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Tran Code" and "TranCode" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "User Id" and "UserID" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Acct Number" and "AccountNumber" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB Destination" (27)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
I use Visual Studio's, integration project to load XML file into SQL Server. In the XML file, i have defined collumns as string. When i try to load XML file with parts defined in scheme as string, i get an error "cannot convert between unicode and non-unicode string data type.
Destinated collumns in SQL are defined as varchar and char.
For packages that I have created to read Oracle 10g tables, that work fine with debugging in 32-bit mode, I get an error message on all string fields when I try to run in 64-bit mode. An example error message is:[OLE DB Source [1]] Error: Column "ACCT_UNIT" cannot convert between unicode and non-unicode string data types.Another interesting warning included is:[OLE DB Source [1]] Warning: The external columns for component "OLE DB Source" (1) are out of synchronization with the data source columns. The external column "ACCT_UNIT" needs to be updated.I cannot even try to convert this data with a Data Conversion item because the (red) error is on the OLE DB Source item and stops there. It doesn't matter what the destination is or even if there is a destination in the package yet.I'm using Oracle Provider for OLE DB, Oracle Client version 10.203 for 32-bit and Oracle Client 10.204 for 64-bit.Oracle is 10g on a UNIX 64-bit server and the data is not unicode.I'm using SQL Server Enterprise 2008 (10.0.1600) on Windows Server 2008 Standard SP1 on a 64-bit server.The packages work fine in 32-bit mode and the data is not unicode data. When I change Run64BitRuntime to True in the Debugging Property Page, I get the error on the OLE DB Source item. I also get the error when I schedule a package to run using the SQL Server Agent.
I have spent countless number of hours trying to solve the issue, but to no vail. My problem is SSIS throws "cannot convert between unicode and non-unicode string data types" when i am try to transform data from DB2 to SQL Server 2005. And please note, i tried all possibilities like changing the destination field which is in SQL Server 2005 to nvarchar and also text. But so far no help. And i also looked at previous posts which did not help me either.
Hi all, we are now planning to upgrade our application from anon-unicode version to a unicode version. The application's backend isa SQL Server 2000 SP3.The concern is, existing business data are stored using collation"Chinese_PRC_CI_AS", i.e. Simplified Chinese. So I thought we need toextract these data out to the new SQL Server which is using Unicode (Iassume it means converting them to nchar, nvarchar type of fields for Idon't enough information from the application side, or is there ageneral unicode collation that will make even char and varchar types tostore data as Unicode?).The problem is what's the best and most efficient way to do this dataconversion?bcp? DTS? or others?thanks a lot
I have built a large package and due to database changes (varchar to nvarchar) I need to do a data conversion of all the flat file columns I am bringing in, to a unicode data type. The way I know how to do this is via the data conversion component/task. My question is, I am looking for an easy way to "Do All Columns" and "Map all Columns" without doing every column by hand in both spots.
I need to change all the columns, can I do this in mass? More importantly once I convert all these and connect it to my data source it fails to map converted fields by name. Is there a way when using the data conversion task to still get it to map by name when connecting it to the OLE destination?
I know I can use the wizard to create the base package, but I have already built all the other components, renamed and set the data type and size on all the columns (over 300) and so I don't want to have to re-do all that work. What is the best solution?
In general I would be happy if I could get the post data conversion to map automatically to the source. But because its DataConversion.CustomerID it will not map to CustomerID field on destination. Any suggestions on the best way to do this would save me hours of work...
In SQL 2000 DTS, I was able to append data from an ODBC source to a SQL 2000 destination table. The destination table was created by copying an attached source table in Access to a new table, then upsizing it to SQL. The character fields come over as varchar, and that seemed to be fine with the DTS job.
Now using the same source table and the same SQL destination, only in SQL 2005 with Integration Services instead of DTS, I get an error because the connection manager interprets the source text fields as Unicode and the destination fields are varchar.
I could script the table and change the text fields in the destination table to nvarchar, but this could have adverse affect on the application that uses the destination table. Is there a way to make the connection manager see the source text fields as varchar, or have the integration package allow the append even though the destination is varchar and the source is nvarchar?
My ssis package exports .xls file data into a sql server table.
The fields in the sql server table have to be nvarchar instead of varchar.
If I use varchar then the ssis package gives an error about converting unicode to non-unicode...
Another ssis package exports .csv data into the sqme sql server table as above.
This time the sql server table fields have to be of type varchar because otherwise the ssis package gives an error about converting non-uniciode to unicode...
I basically would like to have a sql server table with varchar fields and let these packages import into it.
These packages may retrieve data from .csv or .xls.
I keep getting the error message below when attempting to import a text file (flat file) to an SQL Server Destination using SSIS. This database has recently been migrated from SQL Server 2000 (where I used a DTS Package that worked fine). I plan on doing further manipulation to the file after importing but have so far tried to keep one step at a time. I have tried using a smaller files and different tables but still get a similar response. I believe that the encoding of the text file is ANSI. If it is relevant the database collation is Latin1_General_CI_AS (the same as it was when 2000). Any help anyone can provide will be greatly appreciated!!!
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 0" and "AccountNumber" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 1" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 2" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 3" and "Name" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 4" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 5" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 6" and "ExpiryDate" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 7" and "RateType" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 8" can't be inserted because the conversion between types DT_STR and DT_BOOL is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 9" and "FullName" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 10" and "Address" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 11" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 12" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 13" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 14" and "Occupancy" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 15" and "LoanPurpose" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 16" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 17" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 18" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 19" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 20" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 21" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 22" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 23" and "DocumentLocation" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 24" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 25" and "SecurityType" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 26" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 27" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 28" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 29" and "MortgageInsurancePolicyNumber" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 30" and "SecurityAddress" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 31" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 32" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 33" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 34" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 35" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 36" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 37" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 38" and "SecuritySuburb" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 39" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 40" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 41" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 42" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 43" and "MortgageNumber" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 44" and "TitleParticulars" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 45" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 46" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 47" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 48" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 49" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 50" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 51" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [DTS.Pipeline]: "component "SQL Server Destination" (174)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
My ssis package exports .xls file data into a sql server table. The fields in the sql server table have to be nvarchar instead of varchar. If I use varchar then the ssis package gives an error about converting unicode to non-unicode...
Another ssis package exports .csv data into the sqme sql server table as above. This time the sql server table fields have to be of type varchar because otherwise the ssis package gives an error about converting non-uniciode to unicode...
I basically would like to have a sql server table with varchar fields and let these packages import into it. These packages may retrieve data from .csv or .xls.
Hi there.We have an application that can run on a non-unicode or a unicode sqlserverdatabase.Currently the application is running in a unicode database, as anon-unicode database is less than half the size, I would prefer tohave a non-unicode database for demo purposes to be on my laptop, etcetcIs it possible to change a unicode sql server 2000 database into anon-unicode database?And if so, how would I go about doing this?Any help would be greatly appreciated.ThanksRodger
I am using SSIS 2014 with the below .net framework version and installed in Windows server 2012 R2 . I have installed my client's odbc drivers (both 32 bit and 64 bit) in my production server and created ODBC system DSNs for 32 bit and 64 bit.
When i open SSIS 2014 and tried to create the odbc connection but i can able to see only the 32 bit system DSN connection ,i can't able to see my 64 bit odbc system dsn connection.
Microsoft Visual Studio 2012 Shell (Integrated) Version 11.0.50727.1 RTMREL Microsoft .NET Framework Version 4.5.51650
SQL Server Integration Services   Microsoft SQL Server Integration Services Designer Version 12.0.1524.0
And i installed my client odbc drivers(32,64 bit) and created ODBC system DSNs in my local system and when i open ssis 2014 and i can able to see both the ODBC system DSNS(32,64) connections from SSIS ODBC connection.
I am using below version of .net framework in my local system which was installed in windows 7 and i have SSIS 2012 also installed in my system and i can able to see both ODBC connections using 2012 as well in my local system.
Microsoft Visual Studio 2012 Shell (Integrated) Version 11.0.50727.1 RTMREL Microsoft .NET Framework Version 4.5.50938
SQL Server Integration Services   Microsoft SQL Server Integration Services Designer Version 12.0.1524.0
why i can not see the ODBC 64 bit system DSN connection from SSIS in my production server ?
I am using VB.NET 2005 and set up an ODBC connection via ODBC.ODBCConnection to a MDB database. Therefor, I use the "Microsoft Access ODBC Driver (*.mdb)".
When I set up a ODBCCommand like "ALTER DATABASE..." or "CREATE TABLE..." and issue it with the com.ExecuteNonQuery() command, I get an error from ODBC driver, that a SQL statement has to begin with SELECT, INSERT, UPDATE or DELETE.
How can I use DDL statements via ODBC?
I would appreciate if you could help me to use ODBC for that - no OLE, no ADO.
I apologize if this is not the correct forum for this posting. Looking at the descriptions, it appeared to be the best choice.
I am running Windows XP Pro SP2. I have installed the SQL Native Client for XP. However, when I try to add a new data source through ODBC Connection Manager, SQL Native Client is not listed as an option. I have followed this procedure on three other systems with no problems. What would be causing the SQL Native Client to not show up in the list of available ODBC data sources?
Hi all,I am having trouble getting linked Oracle 9 server in MS SQL Server2005 Express to work properly. My machine is running Windows XP.The Microsoft and Oracle OLE DB Providers have problems dealing withOracle's Numeric Data Type, so I decided to use Microsoft's OLE DB forODBC Provider and an Oracle ODBC source. When using the Microsoft ODBCfor Oracle Driver in my ODBC source I have inconsistent behavior.Sometimes my queries are processed properly, then other times I get thefollowing errorOLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttrfailed".OLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttrfailed".OLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC driver for Oracle][Oracle]".Msg 7303, Level 16, State 1, Line 1Cannot initialize the data source object of OLE DB provider "MSDASQL"for linked server "ODBCBEAST".I have no idea why sometimes I can connect to the linked server with noproblems andwhy other times it performs like this. I'm not changing anything aboutthe system I can think of. When I use an Oracle client (PL/SQL) I haveabsolutely no problems connecting. TNSPING returns that the connectionis good.This is unacceptable so I decided to try my luck with the Oracle 10gODBC driver. However when I use this and perform an openquery selectagainst the linked server I get back only 11 rows, when I know that thedatabase has over 100 rows (in fact when using the Microsoft ODBCdriver and it works that's what I get). I figured maybe the buffersetting needed to be raised in the ODBC configuration so I took it from64000 to 600000 (a magnitude of 10) but I still get back only 11 rows.I'm at my wit's end.Any suggestions on resolving one or the other problem would be muchappreciated.Thanks much
Please help share with me if you know the version compatibility matrix of Ms SQL Server, ODBC driver (sqlsrv32.dll), Driver Manager (odbc32.dll) and ODBC API spec. For instance, how can I know Ms SQL Server 2000 can work with which version of sqlsrv32.dll, a particular version of sqlsrv32.dll can work with which version of odbc32.dll and a certain version of sqlsrv32.dll/odbc32.dll conforms to which version of ODBC API spec (e.g. 3.5).
Public Function WriteUniCode(ByVal InQ As String) As String Dim tmpStr1 As String, i As Integer For i = 1 To Len(InQ) tmpStr1 &= AscW(Mid(InQ, i, 1)) If i < Len(InQ) Then tmpStr1 &= "," Next WriteUniCode = tmpStr1 End Function
Public Function ReadUniCode(ByVal InQ As String) As String Dim tmpStr1(), tmpStr2 As String, i As Integer tmpStr1 = Split(InQ, ",") For i = 0 To UBound(tmpStr1) tmpStr2 &= ChrW(tmpStr1(i)) Next ReadUniCode = tmpStr2 End Function
Write : SqlStr = "Insert Into Table1(Col1) Values('" & WriteUniCode("YourText As UniCode") & "')" Read : SqlStr = "Select Col1 From Table1" Textbox1.Text = ReadUniCode(DataRead.item("Col1"))
Hi. I have a hard choice on my hands. I'm not actually sure if I should use n data types or normal ones. I need to be able to use several different languages inside a single string (long articles written in French, English, partially German and Swedish). I'm developing my ASP.NET application using UTF-8 for all data to ensure I can display all languages. I'm in doubt what types to use on the SQL server when I store data... n-something like nchar or normal types like char. Also, that N prefixing all inputs sounds messy :-)(http://support.microsoft.com/?kbid=239530)Also should I use "UTF-8" or "Unicode" (UTF-16, right?)?
Hi everybody My database contain both chinese and english datas. When working with select command i am able to retrieve only english datas eventhough i have made all the datatypes nvarchar. I am using a stored procedure to retrieve the data
declare @chinese nvarchar select field_name from Table_name where name like @chinese+'%'
The qurey is working if we give select * from table name where name like N'政府机关'
i've am trying to move a database from SQL6.5 to SQL2005. I tried to move one of the tables which was a number of char fields to nvarchar fields. Errors came up saying it had Unicode characters ? Does anyone know how i can remove this ?
smart writes "hi please help me to insert unicode characters in sql more information: * SQL server 2000 * filed data type: varchar or nchar or nvarchar but it does not work properly and all characters converted to Question Mark(?)
Hi,I have got couple of questions about unicode settings for database and Iwould be thankful if someone can clear the same for me. Here I go -a. How can I find out whether unicode has beeninitialised for an existing SQL Server database?b. If unicode is initiated, would there be any differencein performance? In particular, would there be anyperformance degradation?Thanks in advance,Harish Mohanbabu*********************************Long way to go before I sleep ..*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
-------------------------------------------------------------------------------------------------- CREATE PROCEDURE test1 @search nvarchar(50)=null AS
select c.cId, c.cCode, c.cDesc, c.cPresident, c.groupId, g.groupName from center c inner join CenterGroups g on c.groupId = g.groupId where c.cDesc like N@search + '%' GO --------------------------------------------------------------------------------------------------
Knowing that @search is parameter sent from vb.net application???
