creating a report in "Trac" using SQL. Basically we have a database running in Trac that manages a workflow, and goes through various stages Eg In Work, Review, etc. Now the nature of this means jobs can go in and out of the same state more than once. Therefore in my report I need to be able to return either the first date (or the last date) for any given state.
For example, when work is started it goes into Initial Layout during this phase of the design it can go on and off hold, so when I produce a report for metrics I want to see only the first time it went into the state Initial Layout. Similar example for Layout Approval, but in this instance I would want the last recorded date it went into this state.At the moment my report is returning multiple lines for the same "ticket" entry in the database, as it is listing each occurance any of the fields change.
Here's my code:
select
t.id as ticket,
t.type as type,
a.value as Project_site,
t.component as Layout_Site,
(CASE WHEN b.value ISNULL THEN ' ' ELSE b.value END) as Project,
I would like to return the nearest date of Table B in my table like for
ID W001 in table B should return ID A002 CreatedDatetime: 2014-06-03 20:05:48.000 ID W002 in table B should return ID A004 CreatedDatetime: 2014-06-04 01:05:48.000
Select p.Id [SenderId], p.Username, up.PhotoId, CASE WHEN mr.ReadDate is null then 1 -- New message ELSE 0 -- Message has been read END AS NewMessage, p.LastLoggedIn, p.LoggedIn
[Code] ....
The above query returns me all messages (inbox functionality) that have been sent to mr.ReceipientId, the issue I have is when I send another email to the recipient the readdate field will be null, and the other emails linked to the recipient which have also been sent via me will have a readdate date. This causes duplicate rows to appear due to the case statement, I'm trying to figure out if / how it is possible to only display the one row per conversation and set newmessage to 1 if there is an un-read message otherwise show 0 ?
Here's my statement below. What I'm trying to get is joining the name column in master.sys.databases with a sub query for the database name, file location and backup start date from the MSDB database. The reason for this, if a new database has never been backed up, It should be returning as a NULL value, which is my goal. However, I'm getting multiple results for the backups.
select CONVERT(CHAR(100), SERVERPROPERTY('Servername')) AS Server,a.name,File_Location=b.physical_device_name,backup_start_date=max(backup_start_date) from master.sys.databases a left join(select c.database_name,backup_start_date=max(backup_start_date),b.physical_device_name from msdb.dbo.backupmediafamily b join msdb.dbo.backupset c on c.media_set_id=c.backup_set_id where c.type='D'
We recently upgrade to 2005(sp). We have one report that ran fine in 2000 but leaves out data from certain columns (date related) in the results, so we chalked it up to being a non compatiable issue. So, I decided to try and switch the DB back to 2000 compatibility (in our test env) and then back to 2005. After that the report started returning the proper data. We can€™t really explain why it worked but it did. So we thought we would try it in prod (we knew it was a long shot) and it didn€™t work. So the business needs this report so we thought we would refresh the test system from prod, but now we are back to square one. I was wondering if anyone else has heard or seen anything like this. I am open to any idea€™s, no matter how crazy. J The systems are configured identically. Let me know if you need more information.
I am opening a simple command against a view which joins 2 tables, so that I can return a column which is defined as a tinyint in one of the tables. The SELECT looks like this: SELECT TreatmentStatus FROM vwReferralWithAdmissionDischarge WHERE ClientNumber = 138238 AND CaseNumber = 1 AND ProviderNumber = 89 The TreatmentStatus column is a tinyint. When I execute that above SQL SELECT statement in SQL Server Management Studio (I am using SQL Server 2005) I get a value of 2. But when I execute the same SQL SELECT statement as a part of a SqlDataReader and SqlCommand, I get a return data type of integer and a value of 1. Why?
I hvae a stored procedure that has this at the end of it: BEGIN EXEC @ActionID = ActionInsert '', @PackageID, @AnotherID, 0, '' END SET NOCOUNT OFF
SELECT Something FROM Something Joins….. Where Something = Something now, ActionInsert returns a Value, and has a SELECT @ActionID at the end of the stored procedure. What's happening, if that 2nd line that I pasted gets called, 2 result sets are being returned. How can I modify this SToredProcedure to stop returning the result set from ActionINsert?
HiI am using SQL 2005, VB 2005I am trying to insert a record using parameters using the following code as per MotLey suggestion and it works finestring insertSQL; insertSQL = "INSERT INTO Issue(ProjectID, TypeofEntryID, PriorityID ,Title, Area) VALUES (@ProjectID, @TypeofEntryID, @PriorityID ,@Title, @Area)"; cmdInsert SqlCommand; cmdInsert=new SqlCommand(insertSQL,conn); cmdInsert.Parameters.Add("@ProjectID",SqlDbType.Varchar).Value=ProjectID.Text; My query is how to detail with dates my previous code wasinsertSQL += "convert(datetime,'" + DateTime.Now.ToString("dd/MM/yy") + "',3), '";I tried the code below but the record doesn't save?string date = DateTime.Now.ToString("dd/MM/yy"); insertSQL = "INSERT INTO WorkFlow(IssueID, TaskID, TaskDone, Date ,StaffID) VALUES (@IDIssue, @IDTask, @TaskDone, convert(DateTime,@Date,3),@IDStaff)"; cmdInsert.Parameters.Add("IDIssue", SqlDbType.Int).Value = IDIssue.ToString();cmdInsert.Parameters.Add("IDTask",SqlDbType.Int).Value = IDTask.Text;cmdInsert.Parameters.Add("TaskDone",SqlDbType.VarChar).Value = TaskDoneTxtbox.Text;cmdInsert.Parameters.Add("Date",SqlDbType.DateTime).Value = date;cmdInsert.Parameters.Add("IDStaff",SqlDbType.Int).Value = IDStaff.Text;Could someone point to me in the right direction?Thanks in advance
My goal is to select values from the same date range for a month on month view to compare values month over month. I've tried using the date trunc function but I'm not sure what the best way to attack this is. My thoughts are I need to somehow select first day of every month + interval 'x days' (but I don't know the syntax).In other words, I want to see
Select Jan 1- 23rd feb 1-23rd march 1-23rd april 1-23rd ,value from table
On cmd.ExecuteNonQuery(); I am getting the following error "Procedure or function usp_Question_Count has too many arguments specified."Any Ideas as to how to fix this. Oh and I will include the SP down at the bottom // Getting the Correct Answer from the Database. int QuiziD = Convert.ToInt32(Session["QuizID"]); int QuestionID = Convert.ToInt32(Session["QuestionID"]); SqlConnection oConn = new SqlConnection("Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\quiz.mdf;Integrated Security=True;User Instance=True"); SqlCommand cmd = new SqlCommand("usp_Question_Count", oConn); cmd.CommandType = CommandType.StoredProcedure; SqlParameter QuizParam = new SqlParameter("@QuizId", SqlDbType.Int); QuizParam.Value = QuiziD; cmd.Parameters.Add(QuizParam); SqlParameter QuestionParam = new SqlParameter("@QuestionID", SqlDbType.Int); QuestionParam.Value = QuestionID; cmd.Parameters.Add(QuestionParam); SqlParameter countParam = new SqlParameter("@CorrectAnswer", SqlDbType.Int); countParam.Direction = ParameterDirection.Output; //cmd.Parameters.Add(workParam); cmd.Parameters.Add(countParam); oConn.Open(); cmd.ExecuteNonQuery(); // get the total number of products int iCorrectAnswer = Convert.ToInt32(cmd.Parameters["@CorrectAnswer"].Value); oConn.Close();Heres the stored ProcedureALTER PROCEDURE dbo.usp_Find_Correct_Answer @QuizID int, @QuestionID int, @CorrectAnswer int OUTPUT /* ( @parameter1 int = 5, @parameter2 datatype OUTPUT ) */AS /* SET NOCOUNT ON */ SELECT @CorrectAnswer=CorrectAnswer FROM Question WHERE QuizID=@QuizID AND QuestionOrder=@QuestionID
I have a web application that is data driven from a SQL 2005 database. The application needs to prompt the user to enter some information that will be logged into a SQL table. It should always be the last row in the table that is being worked on at any one time. Over a period the user will need to enter various fields. Once the data is entered into a field they will not have access to amend it. Therefore I need to be able to SELECT the last row of a table and present the data to the user with the 'next field' to be edited. As I'd like to do this as a stored procedure which can be called from an ASP page I wonder if anyoen might be able to help me with some T-SQL code that might achieve it? Regards Clive
I'm hoping someone can help me w/this query. I'm gathering data from two tables and what I need to return is the following: An employee who is not in the EmployeeEval table yet at all and any Employee in the EmployeeEval table whose Score column is NULL. I'm So lost PLEASE HELP. Below is what I have. CREATE PROCEDURE dbo.sp_Employee_GetEmployeeLNameFNameEmpID ( @deptID nvarchar(20), @Period int)ASSELECT e.LastName + ',' + e.FirstName + ' - ' + e.EmployeeID AS ListBoxText, e.EmployeeID, e.LastName + ',' + e.FirstName AS FullName, ev.Score FROM Employee AS eLEFT JOIN EmployeeEval as ev ON e.EmployeeID = ev.EmployeeIDWHERE e.DeptID = @deptId OR (e.deptid = @deptID AND ev.Score = null AND ev.PeriodID = @Period)GO
hello, I have a small problem. i'm adding records into the DB. the primary key is the company name which is abviously unique. before saving the record i check in the stored procedure if the company code is unique or not. if unique then the record is added & an output parameter is set to 2 & should b returned to the data access layer. if not unique then 3 should be returned. but everytime it seems to be returning 2 whether it is unique or not. can u plz help me? here is the code of the data access layer: cmd.Parameters.Add("@Status", SqlDbType.Int); cmd.Parameters["@Status"].Value = ParameterDirection.ReturnValue;
//cmd.UpdatedRowSource = UpdatedRowSource.OutputParameters; cmd.ExecuteNonQuery(); status = (int)cmd.Parameters["@Status"].Value;
here is the stored procedure: CREATE PROCEDURE spOrganizationAdd( @OrgCode varchar(10), @OrgName varchar(50), @AddressLine1 varchar(30), @AddressLine2 varchar(30), @City varchar(15), @State varchar(15), @Country varchar(15), @PinCode varchar(7), @Phone varchar(20), @Fax varchar(20), @Website varchar(30), @Email varchar(50), @CreatedBy int, @LastModifiedBy int, @Status INTEGER OUTPUT) AS BEGIN TRAN IF EXISTS(SELECT OrgCode FROM tblOrganizationMaster WHERE OrgCode = @OrgCode) BEGIN SET @Status = 3
END ELSE BEGIN INSERT INTO tblOrganizationMaster VALUES( @OrgCode, @OrgName, @AddressLine1 , @AddressLine2 , @City , @State, @Country, @PinCode, @Phone, @Fax , @Website, @Email, @CreatedBy , GETDATE(), @LastModifiedBy , GETDATE()) SET @Status = 2 END IF @@ERROR = 0 COMMIT TRAN ELSE ROLLBACK TRAN
Hello, Im currently working on a asp.net file hosting wesite, and im being faced with some problems I currently have 4 sql tables. DownloadTable, MusicTable, ImageTable and VideoTable. Each of those tables contain a UserName column, a fileSize column and sme other columns. What i want to do is add up all the values in the fileSize column, for each table, and then add them up with the tables, and return one value, and all this happens where the UserName column corresponds to the UserName of the currently logged on User. I already have an sql statement that performs this exact thing. It is as follow select TotalDownLoadSize = sum(DownloadSize) + (select sum(VideoSize) from VideoTable where ([UserName] = @UserName ) ) + (select sum(ImageSize) from Images where ([UserName] = @UserName) ) + (select sum(MusicSize) from MusicTable where ([UserName] = @UserName) ) from DownloadTable where ([UserName] = @UserName) But the problem is that all of the tables have to have a value in there size columns for the corresponding user, for this sql statement to return something. For example, lets say i logged in as jon. If, for the UserName jon, the sum of DownloadTable returned 200, the sum of VideoTable returned 300, the sum of MusicTable returned 100. The sql statement i stated above will return 4 instead of 600, if the sum of ImageTable returned zero. Is there way around this? Im not sure if ive been cleared enough, please feel free to request more info as needed. Thank you very much, and thx in advance.
I have a stored procedure that does all the dirty work for me. I'm just having one issue. I need it to run the total number of RECORDS, and I need it to return the total number of new records for TODAY. Here is part of the code:SELECT COUNT(ID) AS TotalCount FROM CounterSELECT COUNT(*) AS TodayCount FROM Counter WHERE DATEPART(YEAR, visitdate) = Year(GetDate()) AND DATEPART(MONTH, visitdate) = Month(GetDate()) AND DATEPART(DAY, visitdate) = Day(GetDate())The statement works great, I just need to return TotalCount and TodayCount in one query. Is this possible?
Okay so here's a wierd one. I use SQLYog to peek into/administrate my databases.I noticed that this chunk of code is not producing a value... Using Conn As New MySqlConnection(Settings.MySqlConnectionString) Using Cmd As New MySqlCommand("SELECT COUNT(*) FROM tbladminpermissions WHERE (PermissionFiles LIKE '%?CurrentPage%') AND Enabled=1", Conn) With Cmd.Parameters .Add(New MySqlParameter("?CurrentPage",thisPage)) End With Conn.Open() Exists = Cmd.ExecuteScalar() End Using End Using Exists is declared outside of that block so that other logic can access it. thisPage is a variable declared outside, as well, that contains a simple string, like 'index.aspx'. With the value set to 'index.aspx' a count of 1 should be returned, and is returned in SQLYog. SELECT COUNT(*) FROM tbladminpermissions WHERE (PermissionFiles LIKE '%index.aspx%') AND Enabled=1 This produces a value of 1, but NO value at all is returned from Cmd.ExecuteScalar(). I use this method in MANY places and don't have this problem, but here it rises out of the mist and I can't figure it out. I have no Try/Catch blocks so any error should be evident in the yellow/red error screen, but no errors occur in the server logs on in the application itself. Does anybody have any ideas?
Hi everybody, I have a stored procedure that creates some temporary tables and in the end selects various values from those tables and returns them as a datatable. when returning the values, some fields are derived from other fields like percentage sold. I have it inside a Coalesce function like Coalesce((ItemsSold/TotalItems)*100, 0) this function returns 0 for every row, except for one row for which it returns 100. Does that mean for every other row, the value of (ItemSold/TotalItems)*100 is NULL ? if so, how can I fix it ? any help is greatly appriciated. devmetz
Hi I have two text boxes, Textbox A and Textbox B, what i am trying to do is when values are entered in the textboxes, a query runs and returns the results in a datagrid. However I am unusre on how to structure the stored procedure. Can anyone lead me in the right direction, thanks
I have the following stored procedure that is returning nothing can anyone please help? SELECT job_id, line_num, cust_id, cust_po_id, product_desc, form_num, revision, flat_size, new_art_reprint, order_qty, po_recieved_date, ord_ent_date, customer_due_date, scheduled_ship_date, act_ship_date, act_ship_qty, ship_from, ship_to, price_per_m, misc_charges, commentsFROM tblOrderWHERE (cust_id = @Cust_Id) AND (po_recieved_date BETWEEN @Start AND @End) When I input parameters I make sure my start date is before the first po_recieved_date and the end date is after it yet it is returning nothing. I also made sure that I am putting the correct @Cust_Id
I'm trying to return the identity from a stored procedure but am getting the error - "specified cast is invalid" when calling my function. Here is my stored procedure - ALTER Procedure TM_addTalentInvite @TalentID INT AS Insert INTO TM_TalentInvites ( TalentID ) Values ( @TalentID ) SELECT @@IDENTITY AS TalentInviteID RETURN @@IDENTITY
And here is my function - public static int addTalentInvite(int talentID) { // Initialize SPROCstring connectString = "Data Source=bla bla"; SqlConnection conn = new SqlConnection(connectString);SqlCommand cmd = new SqlCommand("TM_addTalentInvite", conn); cmd.CommandType = CommandType.StoredProcedure; // Update Parameterscmd.Parameters.AddWithValue("@TalentID", talentID); conn.Open();int talentUnique = (int)cmd.ExecuteScalar(); conn.Close();return talentUnique; } Any help you can give me will be greatly appreciated thanks!
I have the following query. select top 3 dbo.oncd_incident.open_date,dbo.onca_product.description,dbo.onca_user.full_name,dbo.oncd_incident.incident_id,email, dbo.oncd_contact.first_name,dbo.oncd_contact.last_name,dbo.oncd_contact.contact_id from dbo.oncd_incident inner join dbo.oncd_incident_contact on dbo.oncd_incident_contact.incident_id=dbo.oncd_incident.incident_id inner join dbo.oncd_contact on dbo.oncd_contact.contact_id=dbo.oncd_incident_contact.contact_id inner join dbo.oncd_contact_email on dbo.oncd_contact_email.contact_id=dbo.oncd_contact.contact_id inner join dbo.onca_user on dbo.oncd_incident.assigned_to_user_code=dbo.onca_user.user_code inner join dbo.onca_product on dbo.onca_product.product_code=dbo.oncd_incident.product_code where dbo.oncd_incident.incident_status_code='CLOSED' and email is not null and dbo.oncd_incident.open_date>DateAdd(wk,-2,getdate()) and dbo.oncd_incident.completion_date>=DateAdd(dd,-2,getdate()) and dbo.oncd_incident.assigned_to_user_code in (select user_code from dbo.onca_user) order by newid() I want the query to be executed for each row returned by the sub query.If I use IN keyword it returns top 3 rows for any 3 of the users.But I want top 3 rows to be returned for each of teh user.Please help.
I have a stored procedure that inserts a record. I call the @@Identity variable and assign that to a variable in my SQL statement in my asp.net page.
That all worked fine when i did it just like that. Now I'm using a new stored procedure that inserts records into 3 tables successively, and the value of the @@Identity field is no longer being returned.
As you can see below, since I don't want the identity field value of the 2 latter records, I call for that value immediately after the first insert. I then use the value to populate the other 2 tables. I just can't figure out why the value is not being returned to my asp.net application. Think there's something wrong with the SP or no?
When I pass the value of the TicketID variable to a text field after the insert, it gives me "@TicketID".
I'm using SQL-MSDE and have a table defined with a 'identity seed' column that automatically gets assigned when a record is added (I do not load this value). This column is also my KEY to this table. I'm using INSERT to add a record. Is there a way to return this KEY value after doing the INSERT?
SELECT e.LastName + ',' + e.FirstName + ' - ' + e.EmployeeID AS ListBoxText, e.EmployeeID, e.LastName + ',' + e.FirstName AS FullNameFROM Employee e INNER JOIN EmployeeEval ev ON ev.PeriodID = @Period WHERE (ev.Approved = 0) AND (e.DeptID = @deptID)GOI want to select everyone from the employee table in a dept (determined by DDL) who has either a) had a review and not been approved yet - or b) has not had a review yet ---- all employees are in the employee table -- and all reviews are placed in the employeeeval table.
We just upgraded to SQL 7.0 SP2. We enlarged one of our fields from varchar(255) to varchar(500), but when I do a SELECT on the field it only brings back 255. I know this was a limitation in ISQL in 6.5. I tried it in query analyzer and also via a command line. Any ideas how to see all the data?
