I have this weird situation on one of the production database.
Somebody ran a sql script couple days ago and must have hit cancelled. Somehow this script is still rolling back. The script is actually very simple statement..should not take more than couple miliseconds to run. Is there any way to see whether rollback is really in process or this process has simply hung? is there any other way to get rid of this rollback without stopping and restarting sql server services? Can it cause problems in getting sql server up again if I restart sql server services?
I have a test database for the end users to test their select queries for reports. One of my users is writing queries that cause locking in the database. I killed the process last evening and they are in Killed/Rollback status but are still hogging 90% of the CPU resources for the past 12 hrs. I tried killing them several times but no go.
I know that the best way to clear of these processes is by restarting SQL Server. If that is not an option is there is any other way we can clean these processes?
Also the user running these queries has a read only and create view access to the database. From my experience processes that go into Kill/Rollback state after you kill them are processes associated with some update transaction. Since the user as far as i know is running Select commands would an infinite loop cause this ?
I have over 500 transaction records in a single DB process handling within SQL transaction (Begin, Commit, RollBack and End). Is there any limitation for the following rollbacktransaction function to handle more records (eg. over 500 records)? Public Shared Sub RollBackTransaction() Dim transactionObj As Object Try transactionObj = SqlTransaction.GetExistingTransaction If (Not IsNothing(transactionObj)) Then CType(transactionObj, SqlTransaction).RollBack() End If
Catch ex As Exception Throw New Exception(ex.Message) End Try End Sub
We upgraded QA and production to sql server 2012 last year ( in place) leaving the user databases at sql 2005 ( 90 ). A few months ago the QA user databases were set to sql 2012 compatibility mode. Management is worried about upgrading production and wants to know if we can quickly roll back.
I want to confirm that we can roll back using the same command, and if dbcc freeproccache can be used to avoid having to update all statistics.
ALTER DATABASE <mydatabase> SET COMPATIBILITY_LEVEL = 110
ALTER DATABASE <mydatabase> SET COMPATIBILITY_LEVEL = 90
This works fine in QA on my own test user database. No errors.
I have a query to refer to the data source in as400 with ODBC 'iSeries Access for Windows ODBC data source' and a linked server with 'oledb for ODBC driver' in SQL2005 (9.0.2047)
Now we got 2 problems,
1. When we refer to the view with openquery e.g select * from openquery (abc, 'select * from dates')
This query continue to run without ending. In Activity monitor, we found that it is waiting for resource ole db
2. Since the process continue to run without ending, I kill the process in activity monitor or by command 'kill'. It shows the status 'KILLED/ROLLBACK' and it returns 'SPID 197: transaction rollback in progress. Estimated rollback completion: 0%. Estimated time remaining: 0 seconds.' in 'kill 197 with STATUSONLY'
In problem 1, I found some ppl encountered the same problem (waiting for resource oledb) with openquery to different data source e.g. vfp, oracle.
In problem 2, we can't restart the sql server for clear the unkillable process
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
Hello all, I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation. and it also logs FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone. As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
Dear list Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log the above dos cmd works 100%
However when I use the Execute Process Task I get this error [Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles User::gsPreplogInput = ex.log User::gsPreplogOutput = out.log
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
The customer.bat file will have the following code: tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem: The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
I am having this table locking issue that I need to start paying attention to as its getting more frequent.
The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.
I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).
Hi, I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%) I would get an error message saying: "550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process" and then the upload failed. I'm using SQL Express. Does anybody know what's the cause? Thanks a lot
Hi. When I try to start a package manually clicking the Start Debugging button I get this after a little while:
Cannot process request because the process (3880) has exited. (Microsoft.DataTransformationServices.VsIntegration)
How can I prevent this from happening? This happens every time I want to start the package and every time the process id is different. Here it is 3880.
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process: Spid 55 55 ecid 5 5 Ecid 0 0 ObjId 0 1784601646 IndId 0 0 Type DB PAG Resource 1:1976242 Mode S IS Status TransID GRANT GRANT TransID 0 16980 TransUOW 00000000-0000-0000-0000-000000000000 00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH CMD AWAITING COMMAND Physycal id 1059 Login time 2007-07-05 04:29:53.873 nat address DFF06EBF974D Wait type 0x0046 HostName . BlkBy . DBName grpprddb CPUTime 54331 DiskIO 1059 ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request: select * from SYSOBJECTS where id=1784601646
I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
i'm going nuts with SQL server notification thing. I have gone throigh this artical which tells how to set user http://www.codeproject.com/KB/database/SqlDependencyPermissions.aspx. This article show how to create new user and setup for sql server notification.But In my case user was alredy existing in database. which is very common senario in most cases. So i did following( check the SQL script below) but then i get this error "A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)" this my sql script use [master]Go -- Ensuring that Service Broker is enabled ALTER DATABASE [DatabaseName] SET ENABLE_BROKERGO -- Switching to our databaseuse [DatabaseName]GO CREATE SCHEMA schemaname AUTHORIZATION usernameGO ALTER USER username WITH DEFAULT_SCHEMA = schemaname GO /* * Creating two new roles. We're not going to set the necessary permissions * on the user-accounts, but we're going to set them on these two new roles. * At the end of this script, we're simply going to make our two users * members of these roles. */EXEC sp_addrole 'sql_dependency_subscriber' EXEC sp_addrole 'sql_dependency_starter' -- Permissions needed for [sql_dependency_starter]GRANT CREATE PROCEDURE to [sql_dependency_starter] GRANT CREATE QUEUE to [sql_dependency_starter]GRANT CREATE SERVICE to [sql_dependency_starter]GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_starter] GRANT VIEW DEFINITION TO [sql_dependency_starter] -- Permissions needed for [sql_dependency_subscriber] GRANT SELECT to [sql_dependency_subscriber] GRANT SUBSCRIBE QUERY NOTIFICATIONS TO [sql_dependency_subscriber] GRANT RECEIVE ON QueryNotificationErrorsQueue TO [sql_dependency_subscriber] GRANT REFERENCES on CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] to [sql_dependency_subscriber] -- Making sure that my users are member of the correct role.EXEC sp_addrolemember 'sql_dependency_starter', 'username'EXEC sp_addrolemember 'sql_dependency_subscriber', 'username'
Hi I am using VWD 2008, SQL Express 2005, Reporting Services, Win-XP, IIS5Basically let's say I have 2 pages:Page1: has a SQLDataSource control that populates a GridView from a table from a database file myDB.mdf (no code behind)Page2: has a reportviewer control that show a report with data from the same table from myDB.mdf from the reportserver, (no code behind)I have attached myDB.mdf to the SQL Server Express using the SQL Server Management Studio Express.If I first open Page2 to display the ReportViewer it works ok. or using the Report ManagerNow this is the problem:If after that I try to open Page1 then a get an error message:Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'.Then I have to restart the SQL Server to fix it,Now I can open Page1 ok, but if after this I try to open Page2 (ReportViewer) againThen I get this error:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. &And this error if open the report using the report manager:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. ยง Unable to open the physical file "C:InetpubwwwrootWebsiteApp_DatamyDB.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". &Now if i check the Management Studio Express again, you can see that myDB.mdf was detached. It seems to be there by it has no Tables or definitions, so I have to attach it again..Do you know how to fix this?Thanks in advance,Ed
Hello experts, I made a huge mistake on a production server, ran an update without the WHERE clause. UPDATE myTableSET Field1 = 'SOmetext',Field2 = 'sometext2'Is there a way to rollback? I read something a while ago about transaction logs.SOS!Thanks
HI, Suppose I execute any transaction say inserted some rows. I want to delete my previous transaction using rollback. What is the proper syntax for that. In Query Window: Insert ---------- executed rollback. it was asking for name of the transaction. How to give that. Help me out Thanks Bye
This is my stored procedure. Problem is that a rollback does not happen when there is an error ? How can this be, am starting and ending the transaction?
I have rollback on one of the users. I tried killing her process through Enterprise Manager and Query Analyzer, but I still can see her process on the screen. However, her login is grayed out after I execute the kill query.
I have encountered this problem several times, and the only way I can get clear the rollback is by rebooting the server.
Does anyone have a sugeestion on how to clear the rollback without rebooting.
Hi All A question on DTS ROLLBACK CAPABILITY. Is it possible to setup a DTS pkg to roll back the loaded files if a step fails? If a step fail records inserted by Data Pump to a table should be removed. Is this possible? If so how can we achieve this?
