RsExecutionNotFound
Jul 18, 2007
I wrote a Custom Web App using ASP.NET for reports built using SSRS 2005. The web application uses report viewer control to display the reports. The Report Viewer processing mode is set to "Remote". The session timeout for web application is 30 minutes.
Reports autorefresh property is set to 15 minutes. when the web page thats displaying the reports is running continously, I am occassionally seeing "rsExecutionNotFound" error. The error is not going away even if I refresh the page.
Thanks for u'r help.
View 4 Replies
ADVERTISEMENT
Apr 12, 2006
I can preview a report I've written in VS (BIDS) without error. However, when I've deployed it to the report server, I'm unable to execute the report. I receive the following error:
Reporting Services Error
Execution 'ucv5xtu2x2uvhfjmjkfmfy45' cannot be found (rsExecutionNotFound)
SQL Server Reporting Services
The report contains a chart that RS is rendering. Does something need to be turned on or is the error unrelated to charting? In any event, I'm stumped. Any ideas would be greatly appreciated!
View 26 Replies
View Related
Jun 13, 2007
I have been frequetly visiting your blogs with a solution for rsExecutionNotFound. I used johngaallard's script to extend the accesstimeout(to 6000 ) eventhough that was not the base of the problem.
My Reports run in less than 15 sec (max). I have enabled caching for about 12 hours ( there are nightly updates) using [Cache a temporary copy of the report. Expire copy of report after a number of minutes option])
The reports are rendered using a ReportViewerControl in an ASP.Net2.0 web application.(The report is rendered as PDF and then shown in another IFrame using Adobe plugin).The ASP application session timeout is 100mts.
The problem i am facing is that after sometime, the rsExecutionNotfound starts occuring for some report with a specific set of parameters. No amount of rerunning the report will stop. The same report with different parameters renders fine. The only way to stop this is to set the cache option 'Do not cache temporary copies of this report'.
If i set ''Do not cache temporary copies of this report'' there are no errors. I am doing caching mainly to bring down report rendering from 15 sec to 2-3 secs. I am using PDF format .
I am now thinking of working around by trying to catch the Exception that occurs and trying to re-render the report. If this is the only way, how can i do it.
I had fought fiercely to use SSRS and now I am in a fix
Any help is appreciated.
Thanks,
Saj
View 1 Replies
View Related
Feb 8, 2007
Hello:
We are using Reporting Services 2005 as our production reporting portal. Sometimes our business users get similar messages to the following message (intermittently ) when running reports.
Execution 'ahk2v0rhpeaj3e45lkrf2ine' cannot be found (rsExecutionNotFound)
I have researched online and forums but could not find a solution to this problem. I know it has something to do with sessions dying and loss of session id. Once the user reruns the report it works fine. What is the way to resolve this from happening at all? We don't want the users to see this on production. Has Microsoft already fixed this problem?
Thanks.
View 3 Replies
View Related
Mar 26, 2007
Hello:
We use reporting services as our company wide reports portal. We direct users via URL to the report manager that comes with SSRS. Occassionally users see the rsExecutionNotFound errors. I have read solutions such as hacks to system stored procs...I am not sure if I want to change system stored procs. I know these errors are harmless but they are annoying to the users. What is a safe fix for this problem? Does SP2 fix this issue? Is there a way to catch this error before it happens since it looks like an unhadled exception in the SSRS code.
FYI: I have changed the CleanupecycleMinutes to 20 minutes in the config file
is the error caused because a report runs for more than 20 minutes?
Please help!
View 1 Replies
View Related
Jul 17, 2007
Hello,
I am developing a report viewer application in ASP.NEt 2.0 and in that I have a page called ReportViewer.aspx page which has a report viewer control. The processing mode is remote and it is a SQL Server 2005. There are a couple of dropdownlists one which defines the names of the different reports and the other the reporting periods. Depending on the selection made by the user, the call is made to the reporting server and reporst are displayed. Initially when the page loads, the reports show up without any problems. But if a user is inactive for a while, and the user tries to the view the report, I get the following error
"Execution 'tmf3wgqtzuasux3trzliwx25' cannot be found (rsExecutionNotFound) "
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Reporting.WebForms.ReportServerException: Execution 'tmf3wgqtzuasux3trzliwx25' cannot be found (rsExecutionNotFound).
I did some research and came across this post which is the exact error which i am getting.
http://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=124525
The above link is not working for some reason but if you click on the link below, it says that the issue has been fixed. But there is no information as to how to fix this. Does anybody have any idea as to what the solution is?This is the exact same error which I am getting and any help to resolve this error would be great.
http://64.233.183.104/search?q=cache:H2UEJj42ypcJ:connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx%3FFeedbackID%3D124525+rsExecutionNotFound+%2B+2005&hl=en&ct=clnk&cd=1&gl=us
There are some posts which advise to add the a guid at the end of the url but if you are using a viewer you cannot add anything else to the .ServerReport.ReportURL property other than the path to the report or else it returns an error.
As per my knowledge, the report veiwer control should be keeping the session alive using keep alive messages. There is also the possibility of IE caching and one can disable it by going to Tools -> Options and disabling the caching. But this is not something which I can tell my customers to do.
Any help would be greatly appreciated.
Regards,
arpan
View 2 Replies
View Related
Jan 24, 2008
We are intermittently seeing this error when viewing a report through the report viewer control.
Our setup is three load-balanced web servers all pointing to a single server that runs Reporting Services (front-end and DB). Do any special steps need to be taken to make RS compatible with a web farm? RS itself is not scaled out, just the calling web servers. Those web servers are set up to share session in a separate SQL Server.
Previous threads on this error seem to involve session timeout, but that doesn't appear to be the case here since we sometimes see the error on the very first request of the report. Refreshing the page will sometimes show the report and sometimes not.
Any suggestions?
View 2 Replies
View Related
Nov 2, 2007
Configuration:
Reporting Services 2005 running on IIS/6.0 on Server A.
ReportServer and ReportServerTempDB is running on SQL2005 on Server B.
I have a simple SSRS report that runs on Server A and will connect to SQL 2005 on Server B to retrieve data for the report. My report has only one parameter and I use the value of this parameter as a connection string to the database.
Here is an example of the parameter:
data source=Server B; initial catalog=TestDB; uid=sa; password=abc123
From the report manager, this report is configured to use custom data source.This report is also configured to use Credentials supplied by the user running the report.
Problem:
When I run the report through the Report Manager, as expected, I was prompted to enter a login name and password for report data source. I entered values in both fields and click on the View Report button. Now I am prompted to enter the connection string for the report parameter. I entered a value for parameter and click on the View Report button and I got the following error message:
Execution 'k5jkbu550bjzfy55j1uw1055' cannot be found (rsExecutionNotFound)
When I go back to the Data Sources property screen in report manager and change the credential from
Credentials supplied by the user running the report TO Credentials stored securely in the report server and hardcode the username and password there, the report will run fine.
Can you tell me what the error message means? Any suggestion to get this resolved would be greatly appreciated.
View 2 Replies
View Related
Dec 29, 2007
I tried to export a reort using SQL 2005 Reporting Services. However Iam getting the following log on the screen :
[logs After upgrading the SQL 2005 with SP2 ]
Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)
Description: An unhandled exception occurred during the execution of the
current web request. Please review the stack trace for more information about
the error and where it originated in the code.
Exception Details: Microsoft.Reporting.WebForms.ReportServerException:
Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)
Source Error:
An unhandled exception was generated during the execution of the current web
request. Information regarding the origin and location of the exception can
be identified using the exception stack trace below.
Stack Trace:
[ReportServerException: Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)]
Microsoft.Reporting.WebForms.ServerReport.GetExecutionInfo() +286
Microsoft.Reporting.WebForms.ServerReport.SetExecutionId(String executionId, Boolean fullReportLoad) +109
Microsoft.Reporting.WebForms.ServerReport.LoadFromUrlQuery(NameValueCollection requestParameters, Boolean fullReportLoad) +90
Microsoft.Reporting.WebForms.ReportDataOperation..ctor() +326
Microsoft.Reporting.WebForms.HttpHandler.GetHandler() +194
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +44
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Can any one help me on this issue ?
Regards,
Nik
View 5 Replies
View Related
Nov 19, 2007
Re: SSRS report viewer Execution ' ' cannot be found
(rsExecutionNotFound) Reserved.ReportViewerWebControl.axd
Every now and then, my users get this error while in the Reportviewer.
Usually, they have to close the window where the report was rendered
and pull it open again. Attempting to open the report again does not
work.
What is this?
I run the report viewer like this:
<rsweb:ReportViewer BackColor="Transparent" ZoomMode="Percent"
width="100%" ProcessingMode="Remote" ID="ReportViewer1"
runat="server">
<ServerReport ReportPath="/myfolder/myreport"
ReportServerUrl="http://myserverr/reportserver" />
</rsweb:ReportViewer>
In my web config:
<compilation debug="true" strict="false" explicit="true">
<assemblies>
<add assembly="System.Data.OracleClient, Version=2.0.0.0,
Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="Microsoft.ReportViewer.Common, Version=8.0.0.0,
Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
<add assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0,
Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
</assemblies>
<buildProviders>
<add extension=".rdlc" type="Microsoft.Reporting.RdlBuildProvider,
Microsoft.ReportViewer.Common, Version=8.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a"/>
</buildProviders>
</compilation>
<httpHandlers>
<add path="Reserved.ReportViewerWebControl.axd" verb="*"
type="Microsoft.Reporting.WebForms.HttpHandler,
Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a" validate="false"/>
</httpHandlers>
Thanks for any help or information.
View 1 Replies
View Related
