MS SQL Server :: RsExecutionNotFound Error

RsExecutionNotFound

Apr 12, 2006

I can preview a report I've written in VS (BIDS) without error. However, when I've deployed it to the report server, I'm unable to execute the report. I receive the following error:

Reporting Services Error

Execution 'ucv5xtu2x2uvhfjmjkfmfy45' cannot be found (rsExecutionNotFound)

SQL Server Reporting Services

The report contains a chart that RS is rendering. Does something need to be turned on or is the error unrelated to charting? In any event, I'm stumped. Any ideas would be greatly appreciated!

View 26 Replies View Related

RsExecutionNotFound !

Jun 13, 2007

I have been frequetly visiting your blogs with a solution for rsExecutionNotFound. I used johngaallard's script to extend the accesstimeout(to 6000 ) eventhough that was not the base of the problem.

My Reports run in less than 15 sec (max). I have enabled caching for about 12 hours ( there are nightly updates) using [Cache a temporary copy of the report. Expire copy of report after a number of minutes option])

The reports are rendered using a ReportViewerControl in an ASP.Net2.0 web application.(The report is rendered as PDF and then shown in another IFrame using Adobe plugin).The ASP application session timeout is 100mts.

The problem i am facing is that after sometime, the rsExecutionNotfound starts occuring for some report with a specific set of parameters. No amount of rerunning the report will stop. The same report with different parameters renders fine. The only way to stop this is to set the cache option 'Do not cache temporary copies of this report'.

If i set ''Do not cache temporary copies of this report'' there are no errors. I am doing caching mainly to bring down report rendering from 15 sec to 2-3 secs. I am using PDF format .

I am now thinking of working around by trying to catch the Exception that occurs and trying to re-render the report. If this is the only way, how can i do it.

I had fought fiercely to use SSRS and now I am in a fix
Any help is appreciated.
Thanks,
Saj

View 1 Replies View Related

RsExecutionNotFound

Jul 18, 2007

I wrote a Custom Web App using ASP.NET for reports built using SSRS 2005. The web application uses report viewer control to display the reports. The Report Viewer processing mode is set to "Remote". The session timeout for web application is 30 minutes.

Reports autorefresh property is set to 15 minutes. when the web page thats displaying the reports is running continously, I am occassionally seeing "rsExecutionNotFound" error. The error is not going away even if I refresh the page.

Thanks for u'r help.

View 4 Replies View Related

RsExecutionNotFound

Feb 8, 2007

Hello:

We are using Reporting Services 2005 as our production reporting portal. Sometimes our business users get similar messages to the following message (intermittently ) when running reports.

Execution 'ahk2v0rhpeaj3e45lkrf2ine' cannot be found (rsExecutionNotFound)

I have researched online and forums but could not find a solution to this problem. I know it has something to do with sessions dying and loss of session id. Once the user reruns the report it works fine. What is the way to resolve this from happening at all? We don't want the users to see this on production. Has Microsoft already fixed this problem?

Thanks.

View 3 Replies View Related

RsExecutionNotFound Errors:

Mar 26, 2007

Hello:

We use reporting services as our company wide reports portal. We direct users via URL to the report manager that comes with SSRS. Occassionally users see the rsExecutionNotFound errors. I have read solutions such as hacks to system stored procs...I am not sure if I want to change system stored procs. I know these errors are harmless but they are annoying to the users. What is a safe fix for this problem? Does SP2 fix this issue? Is there a way to catch this error before it happens since it looks like an unhadled exception in the SSRS code.

FYI: I have changed the CleanupecycleMinutes to 20 minutes in the config file

is the error caused because a report runs for more than 20 minutes?

Please help!

View 1 Replies View Related

Execution '' Cannot Be Found (rsExecutionNotFound)

Jan 24, 2008

We are intermittently seeing this error when viewing a report through the report viewer control.
Our setup is three load-balanced web servers all pointing to a single server that runs Reporting Services (front-end and DB). Do any special steps need to be taken to make RS compatible with a web farm? RS itself is not scaled out, just the calling web servers. Those web servers are set up to share session in a separate SQL Server.
Previous threads on this error seem to involve session timeout, but that doesn't appear to be the case here since we sometimes see the error on the very first request of the report. Refreshing the page will sometimes show the report and sometimes not.
Any suggestions?

View 2 Replies View Related

Execution 'nxpyd155vbm4lk55djklt555' Cannot Be Found (rsExecutionNotFound)

Nov 2, 2007

Configuration:
Reporting Services 2005 running on IIS/6.0 on Server A.
ReportServer and ReportServerTempDB is running on SQL2005 on Server B.

I have a simple SSRS report that runs on Server A and will connect to SQL 2005 on Server B to retrieve data for the report. My report has only one parameter and I use the value of this parameter as a connection string to the database.

Here is an example of the parameter:
data source=Server B; initial catalog=TestDB; uid=sa; password=abc123

From the report manager, this report is configured to use custom data source.This report is also configured to use Credentials supplied by the user running the report.

Problem:
When I run the report through the Report Manager, as expected, I was prompted to enter a login name and password for report data source. I entered values in both fields and click on the View Report button. Now I am prompted to enter the connection string for the report parameter. I entered a value for parameter and click on the View Report button and I got the following error message:

Execution 'k5jkbu550bjzfy55j1uw1055' cannot be found (rsExecutionNotFound)

When I go back to the Data Sources property screen in report manager and change the credential from
Credentials supplied by the user running the report TO Credentials stored securely in the report server and hardcode the username and password there, the report will run fine.

Can you tell me what the error message means? Any suggestion to get this resolved would be greatly appreciated.

View 2 Replies View Related

SQL 2005 Reporting Services Displaying Following Log When Exporting Report To A .pdf File. (rsExecutionNotFound)

Dec 29, 2007

I tried to export a reort using SQL 2005 Reporting Services. However Iam getting the following log on the screen :
[logs After upgrading the SQL 2005 with SP2 ]

Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)
Description: An unhandled exception occurred during the execution of the
current web request. Please review the stack trace for more information about
the error and where it originated in the code.

Exception Details: Microsoft.Reporting.WebForms.ReportServerException:
Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)

Source Error:

An unhandled exception was generated during the execution of the current web
request. Information regarding the origin and location of the exception can
be identified using the exception stack trace below.

Stack Trace:

[ReportServerException: Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)]
Microsoft.Reporting.WebForms.ServerReport.GetExecutionInfo() +286
Microsoft.Reporting.WebForms.ServerReport.SetExecutionId(String executionId, Boolean fullReportLoad) +109
Microsoft.Reporting.WebForms.ServerReport.LoadFromUrlQuery(NameValueCollection requestParameters, Boolean fullReportLoad) +90
Microsoft.Reporting.WebForms.ReportDataOperation..ctor() +326
Microsoft.Reporting.WebForms.HttpHandler.GetHandler() +194
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +44
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64

Can any one help me on this issue ?

Regards,
Nik

View 5 Replies View Related

SSRS Report Viewer Execution ' ' Cannot Be Found (rsExecutionNotFound) Reserved.ReportViewerWebControl.axd

Nov 19, 2007

Re: SSRS report viewer Execution ' ' cannot be found
(rsExecutionNotFound) Reserved.ReportViewerWebControl.axd

Every now and then, my users get this error while in the Reportviewer.

Usually, they have to close the window where the report was rendered
and pull it open again. Attempting to open the report again does not
work.

What is this?

I run the report viewer like this:

<rsweb:ReportViewer BackColor="Transparent" ZoomMode="Percent"
width="100%" ProcessingMode="Remote" ID="ReportViewer1"
runat="server">
<ServerReport ReportPath="/myfolder/myreport"
ReportServerUrl="http://myserverr/reportserver" />
</rsweb:ReportViewer>

In my web config:

<compilation debug="true" strict="false" explicit="true">
<assemblies>
<add assembly="System.Data.OracleClient, Version=2.0.0.0,
Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="Microsoft.ReportViewer.Common, Version=8.0.0.0,
Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
<add assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0,
Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
</assemblies>
<buildProviders>
<add extension=".rdlc" type="Microsoft.Reporting.RdlBuildProvider,
Microsoft.ReportViewer.Common, Version=8.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a"/>
</buildProviders>
</compilation>

<httpHandlers>
<add path="Reserved.ReportViewerWebControl.axd" verb="*"
type="Microsoft.Reporting.WebForms.HttpHandler,
Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a" validate="false"/>
</httpHandlers>

Thanks for any help or information.

View 1 Replies View Related

SQL Server 2005 Install Error (Error 29528. Unexpected Error While Installing Performance Counters. )

Jun 12, 2007

I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit):
Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.

This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.

Extract from log:

<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,)
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close)
MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
Gathering darwin properties for failure handling.
Error Code: 2
MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.

You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).

I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.

Any ideas?

View 3 Replies View Related

[File System Task] Error: An Error Occurred With The Following Error Message: Access To The Path Is Denied

Sep 7, 2007

Hi -

I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:

[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".

Where do I change the security settings?

Thanks - Grace

View 5 Replies View Related

Exec Pkg Task: Error 0xC0202009 While Preparing To Load The Package. An OLE DB Error Has Occurred. Error Code: 0x%1!8.8X!.

Feb 21, 2007

I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says

Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.

Any clue ?

Thanks,
Fahad

View 1 Replies View Related

Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error Accessing Windows Event Log

Dec 13, 2007

Hi,

I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.

Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."

Please help me

thanks in advance

Srinivas

View 1 Replies View Related

An Internal Error Occurred On The Report Server. See The Error Log For More Details. RsInternal Error)

May 20, 2008

We have reports deployed in the Report Server. While connecting from client, we are getting the error
"An internal error occurred on the report server. See the error log for more details. rsInternal Error)"

Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.

Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.

We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?

Please help.

View 1 Replies View Related

[XML Task] Error: An Error Occurred With The Following Error Message: There Are Multiple Root Elements.

Aug 18, 2006

I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:

[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".

The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:

<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>

There is only 1 ESDU root element and only 1 package element.

Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:

<?xml version="1.0" encoding="UTF-8"?>

<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>

<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>

<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>

</xsl:stylesheet>

Its 5th line is the first xsl:template element.

What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.

Thanks!

View 5 Replies View Related

I Have The Dreaded Internal Error Occured On The Report Server. See Error Log For More Details No Error Log

Apr 9, 2008

I have the error above, but no error log. I can preview the sub report - but this main report fails after working this morning. This is for internal company reports and I rebuilt this one after converting from access.
I have looked where the error logs should be, but there are no error logs.
I rebuilt the query as I needed to change this, but this did not help.
Is there someone who could point me in the correct direction.

Thanks!
Terry

View 4 Replies View Related

Just Started Getting This Error When Trying To Connect To SQL From ASP.NET--error: 26 - Error Locating Server/Instance Specified

Apr 3, 2007

This has worked fine for weeks, and months.

I'm running Vista Ultimate. SQL 2005 is set as my Default instance, and SQL2000 is set as (local)SQL2000.

Today, actually half way through today, I restarted my computer after installing Photoshop Updates.

Upon getting my computer back up and running, I cannot access SQL2000 from any website on my computer, nor can I access it from SQL2005 Management Stdio. I CAN access it from Enterprise Manager (SQL2000 tool).

Whenever I run an web app that connects to it I get this error:

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Now I usually get these when ASP.NET can't point to the right spot, but in this case I'm pointing exactly where I need to go. Any thoughts?

--Edit

I should also add my password got changed a few days ago on our Domain. This was the first time restarting after the PW change.

View 1 Replies View Related

Error 7399: OLE DB Provider 'MSDAORA' Reported An Error. OLE DB Error

Feb 18, 2007

My link server was working just fine until friday evening.
It stopped worked over the week end.
with and error Error 7399: OLE DB provider 'MSDAORA' reported an error. OLE DB error .

---my oracle 10g client is working just fine
--TNS names looks fine
---i recreated the link but i am still getting the same error.

I need your help because a lot of jobs are using that link on Monday it is going to be crazzzy.

View 7 Replies View Related

614 Error On A User Database And 806 Error On Tempdb Seen In The Error Log

Jan 5, 2002

Hi,

We have a production SQLServer 6.5 running with service pack SP5a update:

I got the following 2 errors.....

1.

Error : 806, Severity: 21, State: 1
Could not find virtual page for logical page 67833121 in database 'tempdb' database 'tempdb'

2.

I got error when I ran a job for Update statistics
Error : 614, Severity: 21, State: 3
A row on page 2697653 was accessed that has an illegal length of -8631 in database 'abc'.

For Error 2: I ran update statistics using query analyser. It is fine
Is there anything I have to do further?

For Error 1 : The work around given by Microsoft
=================================================
I ran
DBCC CHECKTABLE(syslogs)

I am getting the following message on :
master:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 11 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.

model:
Checking syslogs
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.

tempdb:

Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 31 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.

I ran dbcc checkdb on master,model and tempdb . Still I get the same problem.

for tempdb:

Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 19 data rows.

for master:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 27 data rows.

for model:
Checking 8
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.

All system databases and userdatabase recovered successfully when I restarted sqlserver.

Please advice how to get rid of this problem.

Thanks in advance,
Anu

View 4 Replies View Related

Error List With Appropriate Error Number And Error Message

Oct 10, 2007

where can i find it?

thanks

View 4 Replies View Related

The Push Method Returned One Or More Error Rows. See The Specified Error Table. [ Error Table Name = ]

Jan 10, 2008

Hi,
I have application in which i am performing synchronization between SQL Server 2000 and SQL Server 2005 CE.
I have one table "ItemMaster" in my database.There is no relationship with this table,it is standalone.I am updating its values from Windows Mobile Device.

I am performing below operations for that.
Step : 1 Pull To Mobile

Code BlockmoSqlCeRemoteDataAccess.Pull("ItemMaster", "SELECT * FROM ItemMaster", lsConnectString,RdaTrackOption.TrackingOn);

Step : 2 Using one device form i am updating table "ItemMaster" table's values.

Step : 3 Push From Mobile

Code BlockmoSqlCeRemoteDataAccess.Push("ItemMaster", msConnectString);

So i am getting an error on 3rd step.
While i am trying to push it says,
"The Push method returned one or more error rows. See the specified error table. [ Error table name = ]".
I have tried it in different ways but still i am getting this error.

Note : Synchronization is working fine.There is not issue with my IIS,SQL CE & SQL Server 2k.

Can any one help me?I am trying for that since last 3 days.

View 7 Replies View Related

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB Error Has Occurred. Error Code: 0x8000FFFF.

Jan 28, 2008

Hi All,

Recently in an SSIS package I am getting the following error for a particular Data flow task.

Error: 2008-01-25 12:01:48.58

Code: 0xC0202009

Source: Import Datasynapse Data User Events Source [3017]

Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.

End Error

Error: 2008-01-25 12:01:48.73

Code: 0xC004701A

Source: Import Datasynapse Data DTS.Pipeline

Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.

End Error

Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?

Since this is very urgent, immediate response would be very much appreciated.

Thanks & Regards,
Prakash Srinivasan

View 4 Replies View Related

Strange Error In Error Log (error 17824)

May 6, 1999

We are encounrtering a strange error in out sql error log:

source: ods
error: 17824, severity 10, state 0
source: ods
unable to write to ListenOn connection '.pipesqlquery', loginname 'op', hostname 'BOR0181'

This error occurs multiple times per day from several client stations.

It started when we enabled replication on that server, and started replicating the whole database to another server.

Can somebody give me an idea on what the problem could be ?
Bart Roelant
Capsugel Belgium

View 1 Replies View Related

I Got The Following Error: Error: 823, Severity: 24, State: 4 I/O Error 33

Oct 6, 2006

I got the following error

Error: 823, Severity: 24, State: 4

I/O error 33(The process cannot access the file because another process
has locked a portion of the file.) detected during write at offset

0x0000000a796000 in file xxxxxxxxx.mdf'.

What happend with my database?

View 1 Replies View Related

Error :(provider: Named Pipes Provider, Error: 40 - Could Not Open A Connection To SQL Server) (Microsoft SQL Server, Error: 53)

Mar 1, 2007

Hi,

I am trying to connect to my SQL Server 2005 but it gave me following error message.

TITLE: Connect to Server
------------------------------

------------------------------
ADDITIONAL INFORMATION:

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)

So, Please help me to solve this problem.

tnks.

View 20 Replies View Related

Error = Arithmetic Overflow Error Converting Expression To Data Type Smalldatetim

Mar 22, 2007

$exception {"Arithmetic overflow error converting expression to data type smalldatetime.
The statement has been terminated."} System.Exception {System.Data.SqlClient.SqlException}
occurs
here is my code
protected void EmailSubmitBtn_Click(object sender, EventArgs e)
{
SqlDataSource NewsletterSqlDataSource = new SqlDataSource();
NewsletterSqlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["NewsletterConnectionString"].ToString();

//Text version
NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.Text;
NewsletterSqlDataSource.InsertCommand = "INSERT INTO NewsLetter (EmailAddress, IPAddress, DateTimeStamp) VALUES (@EmailAddress, @IPAddress, @DateTimeStamp)";

//storeprocedure version
//NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.StoredProcedure;
//NewsletterSqlDataSource.InsertCommand = "EmailInsert";
NewsletterSqlDataSource.InsertParameters.Add("EmailAddress", EmailTb.Text);
NewsletterSqlDataSource.InsertParameters.Add("IPAddress", Request.UserHostAddress.ToString());
NewsletterSqlDataSource.InsertParameters.Add("DateTimeStamp", DateTime.Now.ToString());
int rowsAffected = 0;
try
{
rowsAffected = NewsletterSqlDataSource.Insert();
}
catch (Exception ex)
{
Server.Transfer("NewsletterProblem.aspx");
}
finally
{
NewsletterSqlDataSource = null;
}
if (rowsAffected != 1)
{
Server.Transfer("NewsletterProblem.aspx");
}
else
{
Server.Transfer("NewsletterSuccess.aspx");
}

View 3 Replies View Related

Irregular Error In SQL 2000-Named Pipes Provider, Error: 40, Could Not Establish Connection

Apr 10, 2007

I have a web application developed in VS.NET 2005 [using C# as code behind]; and it uses SQL Server 2000 Enterprise edition as backend.
The application runs fine, though it gives an error on IRREGULAR intervals on SQL data requests.
Error Details:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)

My problem is this:
1) Why does it show an error of SQL 2005, while I use SQL 2000. SQL 2005 is not even installed on the server, though VS.NET 2005 is installed.
2) The error comes only at irregular intervals. Users are able to login properly otherwise.
3) Application starts working again if we do either of the following: (a) Restart IIS (b) Restart application pool (c) Restart server.
4) Named pipes and TCP/IP are added to the "Network Configuration" of the SQL server 2000.
5) Error does not come on any specific page; or any specific code; or at any specific time.
6) We do not have any background service or any other activity happening on the server; and the server hosts only this application, within a single virtual root.

Any thoughts on why is this happening, and how to resolve this?

View 10 Replies View Related

Error: CrystalDecisions.CrystalReports.Engine.FormulaException: Error In File C:DOCUME~1AM-TK-~1ASPNETLOCALS~

Sep 27, 2007

Hello,
I am having a crystal report using datastored in a dataset. When I select one of items in a dropdownlist, it gives me this error message. Note that I used that code before in another web page using a different crystal report and a different dataSet and it worked successfully, but this time it doesn't work....anyone can tell me what causes this error and how to solve it???
NOTE: I am using a vb code behind in my .aspx page

Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt: Error in formula <Record_Selection>. '{StProd2.ItemDescription}' The result of selection formula must be a boolean.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: CrystalDecisions.CrystalReports.Engine.FormulaException: Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt: Error in formula <Record_Selection>. '{StProd2.ItemDescription}' The result of selection formula must be a boolean.Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:

[FormulaException: Error in File C:DOCUME~1AM-TK-~1ASPNETLOCALS~1Temp emp_03ca344b-568e-4ea1-bea8-94f3ef92bbcd.rpt:
Error in formula <Record_Selection>.
'{StProd2.ItemDescription}'
The result of selection formula must be a boolean.]
.F(String , EngineExceptionErrorID
)
.A(Int16 , Int32 )
.@(Int16 )
CrystalDecisions.CrystalReports.Engine.FormatEngine.GetPage(PageRequestContext reqContext)
CrystalDecisions.ReportSource.LocalReportSourceBase.GetPage(PageRequestContext pageReqContext)
CrystalDecisions.Web.ReportAgent.u(Boolean N)
CrystalDecisions.Web.CrystalReportViewer.OnPreRender(EventArgs e)
System.Web.UI.Control.PreRenderRecursiveInternal()
System.Web.UI.Control.PreRenderRecursiveInternal()
System.Web.UI.Control.PreRenderRecursiveInternal()
System.Web.UI.Page.ProcessRequestMain()

View 1 Replies View Related

Urgent : DB-Library Error 10007: General SQL Server Error: Check Messages From The SQL

Jul 20, 2005

DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.CREATE PROCEDURE [dbo].[spu_Import_Export_Image](@srvr varchar(50),@db varchar(50),@usr varchar(15),@pwd varchar(50),@tbl varchar(50),@col varchar(50),@mod varchar(1),@imgpath1 varchar(1000),@pk varchar(50))ASBEGINdeclare @path varchar(50)declare @whr varchar(200)declare @fil varchar(100)declare @cmd varchar(1000)declare @imgpath varchar(800)declare @ext varchar(5)--declare @pk varchar(50)declare @KeyValue varchar(8000)declare @image varchar(50)--declare @imgpath1 varchar(1000)declare @imgpath2 varchar(1000)declare @sellist varchar(2000)set @path = 'c: extCopy.exe'select @sellist = 'DECLARE curKey CURSOR FOR SELECT ' + @pk +' FROM '+ @tbl + ' ORDER BY ' + @pkexec (@sellist)OPEN curKeyFETCH NEXT FROM curKey INTO @KeyValueWHILE (@@fetch_status = 0)BEGINset @whr = '"where '+ @pk +' = "' + @KeyValueset @fil = @imgpath1 + '' + @KeyValue --+ @extset @cmd = @path + ' /S ' + @srvr + ' /D ' + @db + ' /U ' + @usr+ ' /P ' + @pwd+ ' /T ' + @tbl + ' /C ' + @col + ' /W ' + @whr + '/F ' + @fil+ ' /' + @modexec Master..xp_cmdShell @cmdFETCH NEXT FROM curKey INTO @KeyValueENDCLOSE curKeyDEALLOCATE curKeyENDGOAbove srcipt runs fine with image data type in one table but when irun for some other table it gives me Error MessageTEXTCOPY Version 1.0DB-Library version 8.00.194SQL Server 'WSQL01' Message 170: Line 1: Incorrect syntax near '99'.(Concerning line 1)DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.ERROR: Could not use database 'test1'NULL-----------Aslo it only runs on server console if i run it from workstation uingsame files and tables it gives me an error again. Can anybody help meand reply me at Join Bytes! asap.thnx,dharmesh

View 1 Replies View Related

ERROR:Syntax Error Converting Datetime From Character String. With Stored Procedure

Jul 12, 2007

Hi All,

i have migrated a DTS package wherein it consists of SQL task.

this has been migrated succesfully. but when i execute the package, i am getting the error with Excute SQL task which consists of Store Procedure excution.

But the SP can executed in the client server. can any body help in this regard.

Thanks in advance,

Anand

View 4 Replies View Related

Error: 26 - Error Locating Server/Instance Specified - (My Hosting Company Says It's In My Connection String) NOT!

May 24, 2007

Hi All...

I am trying to move my site (incomplete) for testing and I am finding that the Db connection process to be

the most difficult, well back to my problem. I can't seem to get past this error and am frustrated with overall

connectivity problems. Please help!!!

===================================================================================

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:

[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160
System.Web.UI.WebControls.Login.AttemptLogin() +105
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102

Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210

Now you all must admit that, if your somewhat new to this databasing, It's a ***.

The source for my application is Visual Web Designer 2005 Express

It is an ASP.Net driven site with membership roles and all the good stuff.

the latest theory is that I need to change the provider config in the web.config file from AspNetSqlProvider

to something else. Most of my complications and frustrations come from GoDaddy and no access to the

shared server (understandibly).

I hope I gave enough info for help and not too much..

Dave

View 4 Replies View Related

Subscription Error : Failure Sending Mail: An Error Has Occurred During Report Processing

Nov 16, 2007

Hello,

On the development server, I am trying to work with subscriptions . Report Server is windows authenticated.

When no paramters exist for the report, the sucbscription is successful.
But if there are paramters for the report, email delivery fails.

These are not data driven subscriptions.

Did anyone face the same problem ? Can anyone tell me where to start debugging since logfiles just say failure to send the email.

Thanks,
SqlNew

View 2 Replies View Related