We use reporting services as our company wide reports portal. We direct users via URL to the report manager that comes with SSRS. Occassionally users see the rsExecutionNotFound errors. I have read solutions such as hacks to system stored procs...I am not sure if I want to change system stored procs. I know these errors are harmless but they are annoying to the users. What is a safe fix for this problem? Does SP2 fix this issue? Is there a way to catch this error before it happens since it looks like an unhadled exception in the SSRS code.
FYI: I have changed the CleanupecycleMinutes to 20 minutes in the config file
is the error caused because a report runs for more than 20 minutes?
I can preview a report I've written in VS (BIDS) without error. However, when I've deployed it to the report server, I'm unable to execute the report. I receive the following error:
Reporting Services Error
Execution 'ucv5xtu2x2uvhfjmjkfmfy45' cannot be found (rsExecutionNotFound)
SQL Server Reporting Services
The report contains a chart that RS is rendering. Does something need to be turned on or is the error unrelated to charting? In any event, I'm stumped. Any ideas would be greatly appreciated!
I have been frequetly visiting your blogs with a solution for rsExecutionNotFound. I used johngaallard's script to extend the accesstimeout(to 6000 ) eventhough that was not the base of the problem.
My Reports run in less than 15 sec (max). I have enabled caching for about 12 hours ( there are nightly updates) using [Cache a temporary copy of the report. Expire copy of report after a number of minutes option])
The reports are rendered using a ReportViewerControl in an ASP.Net2.0 web application.(The report is rendered as PDF and then shown in another IFrame using Adobe plugin).The ASP application session timeout is 100mts.
The problem i am facing is that after sometime, the rsExecutionNotfound starts occuring for some report with a specific set of parameters. No amount of rerunning the report will stop. The same report with different parameters renders fine. The only way to stop this is to set the cache option 'Do not cache temporary copies of this report'.
If i set ''Do not cache temporary copies of this report'' there are no errors. I am doing caching mainly to bring down report rendering from 15 sec to 2-3 secs. I am using PDF format .
I am now thinking of working around by trying to catch the Exception that occurs and trying to re-render the report. If this is the only way, how can i do it.
I had fought fiercely to use SSRS and now I am in a fix Any help is appreciated. Thanks, Saj
I wrote a Custom Web App using ASP.NET for reports built using SSRS 2005. The web application uses report viewer control to display the reports. The Report Viewer processing mode is set to "Remote". The session timeout for web application is 30 minutes.
Reports autorefresh property is set to 15 minutes. when the web page thats displaying the reports is running continously, I am occassionally seeing "rsExecutionNotFound" error. The error is not going away even if I refresh the page.
We are using Reporting Services 2005 as our production reporting portal. Sometimes our business users get similar messages to the following message (intermittently ) when running reports.
Execution 'ahk2v0rhpeaj3e45lkrf2ine' cannot be found (rsExecutionNotFound)
I have researched online and forums but could not find a solution to this problem. I know it has something to do with sessions dying and loss of session id. Once the user reruns the report it works fine. What is the way to resolve this from happening at all? We don't want the users to see this on production. Has Microsoft already fixed this problem?
I am developing a report viewer application in ASP.NEt 2.0 and in that I have a page called ReportViewer.aspx page which has a report viewer control. The processing mode is remote and it is a SQL Server 2005. There are a couple of dropdownlists one which defines the names of the different reports and the other the reporting periods. Depending on the selection made by the user, the call is made to the reporting server and reporst are displayed. Initially when the page loads, the reports show up without any problems. But if a user is inactive for a while, and the user tries to the view the report, I get the following error
"Execution 'tmf3wgqtzuasux3trzliwx25' cannot be found (rsExecutionNotFound) "
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Reporting.WebForms.ReportServerException: Execution 'tmf3wgqtzuasux3trzliwx25' cannot be found (rsExecutionNotFound).
I did some research and came across this post which is the exact error which i am getting.
The above link is not working for some reason but if you click on the link below, it says that the issue has been fixed. But there is no information as to how to fix this. Does anybody have any idea as to what the solution is?This is the exact same error which I am getting and any help to resolve this error would be great.
There are some posts which advise to add the a guid at the end of the url but if you are using a viewer you cannot add anything else to the .ServerReport.ReportURL property other than the path to the report or else it returns an error.
As per my knowledge, the report veiwer control should be keeping the session alive using keep alive messages. There is also the possibility of IE caching and one can disable it by going to Tools -> Options and disabling the caching. But this is not something which I can tell my customers to do.
We are intermittently seeing this error when viewing a report through the report viewer control. Our setup is three load-balanced web servers all pointing to a single server that runs Reporting Services (front-end and DB). Do any special steps need to be taken to make RS compatible with a web farm? RS itself is not scaled out, just the calling web servers. Those web servers are set up to share session in a separate SQL Server. Previous threads on this error seem to involve session timeout, but that doesn't appear to be the case here since we sometimes see the error on the very first request of the report. Refreshing the page will sometimes show the report and sometimes not. Any suggestions?
Configuration: Reporting Services 2005 running on IIS/6.0 on Server A. ReportServer and ReportServerTempDB is running on SQL2005 on Server B.
I have a simple SSRS report that runs on Server A and will connect to SQL 2005 on Server B to retrieve data for the report. My report has only one parameter and I use the value of this parameter as a connection string to the database.
Here is an example of the parameter: data source=Server B; initial catalog=TestDB; uid=sa; password=abc123
From the report manager, this report is configured to use custom data source.This report is also configured to use Credentials supplied by the user running the report.
Problem: When I run the report through the Report Manager, as expected, I was prompted to enter a login name and password for report data source. I entered values in both fields and click on the View Report button. Now I am prompted to enter the connection string for the report parameter. I entered a value for parameter and click on the View Report button and I got the following error message:
Execution 'k5jkbu550bjzfy55j1uw1055' cannot be found (rsExecutionNotFound)
When I go back to the Data Sources property screen in report manager and change the credential from Credentials supplied by the user running the report TO Credentials stored securely in the report server and hardcode the username and password there, the report will run fine.
Can you tell me what the error message means? Any suggestion to get this resolved would be greatly appreciated.
I tried to export a reort using SQL 2005 Reporting Services. However Iam getting the following log on the screen : [logs After upgrading the SQL 2005 with SP2 ]
Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Reporting.WebForms.ReportServerException: Execution 'ssem4cntbzve525531im5aup' cannot be found (rsExecutionNotFound)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG I reveived the following error. how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507). . . . . . . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736). CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . . . . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875). Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
I have been receiving 644 errors on an index for one of my tables. We have dropped and rebuilt the index. Even BCP out, drop the table, create the table and BCP in everything and still have problems.
Has anyone else experienced problems with 644 errors? Did you ever determine the cause and are they any preventative ideas?
Ok, whenever I try to connect, I get the following Error messages:
"SQL Server Registration failed because of the connection failure displayed below. SQL Server does not exist or access denied. ConnectionOpen (Connect())"
"An Error 1069 occured while performing this service operation on the MSSQLServer Service"
I even went as far as uninstalling and reinstalling, but to no avail. Does anyone have an idea what's causing this? It was working fine and then all the sudden one day I start getting these messages and it won't work.
I have a dynamics db that is used for archival purposes and it is not used very often. Now that someone decided to get some info out of it it wont let them. when I run dbcc I get the following message:
Msg 5242, Level 16, State 1, Line 1 An inconsistency was detected during an internal operation in database 'PACIF'(ID:12) on page (1:19451). Please contact technical support. Reference number 6. Msg 8921, Level 16, State 1, Line 1 Check terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors.
I was just wondering if this meant anything to any of you? and since all of my backtapes have the same issue, is there any way to fix it?
Running SQL 05 Standard on a Vista box and I have about had it with Vista. Anytime I try to launch Config Manager I get Cannot connect to WMI provider. You do not have permission or the server is unreachable. So try I googled and tried everything I can fine from http://blogs.msdn.com/echarran/archive/2006/01/03/509061.aspx
C:Program FilesMicrosoft SQL Server90Shared>mofcomp "C:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof" and now I get ..
An error occurred while processing item 10 defined on lines 73 - 79 in file C:s
qlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041001
so I try every possible different permission setting for anything sql server - problem still happening... try procmonitor.. find the registry keys and grant full contorl to all of them.. problem still happending.. run the little fixwmi.cmd I found.. problem still happening..
try to uninstall SQL Server.. NOT - WMI error - try to reinstall over--- NOT WMI error.
What do I need to do to get this working. .this is becoming a serious hinderance to my productivity!!!
what a want to know is if there s a way to log sql server errors on a log file, table, these errors are not sql server logs which already exists, i want to log dead locks, sql server timeout errors vs on sql server or somewhere.
Hi Expert, I have a datagrid which is filtering by a dropdownlist and a search textbox.
The dropdownlist allows to select the column they want to search. The search textbox allows to enter the item they want based on the selection from dropdown. Now I use a StoreProcedure to select the data they need, so I pass-in @DropDownListValue int and some others parameters, such as @ID int, @OrderType varchar(50) ... When I search for ID = 163 Input string was not in a correct format. Then when I check with the SQL Server Profiler, I found out that: exec usp_SelectOrder@DropDownListValue=N'1',@ID=N'163',@OrderType=N'163',@OrderSeries=N'163' ... I already set every parameter's default value to NULL. How can I solve for this? Thanks!!
Why on earth is this not working, It WILL insert if there are NO apostheres (" ' "), but if I say like, "Cedric's Group" It will error out. I thought this approach was suppose to handle this character? Thanks for any insight, String sqlStr = "Insert into cardgroups (username,groupname,insertdt,groupid) values (@username,@groupname,@insertdt,@groupid)";
Imports System.Data.SqlClientImports System.DataImports Microsoft.SqlServerPartial Class _Default Inherits System.Web.UI.Page Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click End Sub Protected Sub TextBox3_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles TextBox3.TextChanged End Sub Protected Sub SqlDataSource1_Selecting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceSelectingEventArgs) Handles SqlDataSource1.Selecting End Sub Protected Sub Save_Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Save_Button1.Click Dim conn As New SqlConnection() conn.ConnectionString = Data Source=REDSTONE;Persist Security Info=True;User ID=******;Password=******;Unicode=True End SubEnd Class
End of statement expected. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb 'System.Data' is a namespace and cannot be used as an expression. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
Hello to all, On my webPage I have Used one SQLDataSource to access DataBase. Now whenever some error occures it shows error page by default. I am not able to catch Errors and tackle in my way... Furthermore in this new structure of accessing DataBase even I do not know where to write Try... Catch...
Well there's always a first for everything!! I have a SQL 7.0 server on sP1 and ran upgrade to sp3 and recieved error 'error in upgrade script' retry or cancel. When I retried the upgrade ended. I tried to run the upgrade again and it tries continue where it ended before, but the upgrade ends unsucessfully. I even tried extracted the sp3 exe to a diffrent folder and ran the sp3 upgrade with same results.
I started the MSSQL service ok but not able to use Query Analyzer, DTS, EM.
Get the following message:ISQL.EXE - Entry Point not found. The procedure entry point?DeleteRow@CDataCTLStorage@@UAEJJPAPAG@Z could not be located in the dynamic link library SQLGUI.dll
I get similar msgs when trying to open DTS, Enterprise manager from the server. The user databases and appear to be ok. I am able to get to Query Analyzer, etc. from my worksation fine.
Has anyone encountered this before? Is there a fix for it or do I need to rebuild the server from SP1 and restore the databases, etc.??
It gives following errors 1.time out 2.general network failure
* Are these due to large number of online connnections *If so what is the maximum number of connections possible *what is the hardware requirement to avoid this *what is the impact on stored procedures *How to tune the server to overcome the problems *I'm currently using the standard edition what is the impact on enterprise edition
Over the last few weeks we've been having problems with a particular table in our live OLTP database - dbcc checkdb has been reporting consistency errors.
Initially i took the db offline and fixed the errors using checkdb and replacing the deleted records from a backup of the table. After some investigation it appeared that the errors were being caused when the unique clustered index on the table was rebuilt during weekend maintenance. After a lot of testing i was sure this was the case - so i just deleted the index (the table is small and was over-indexed anyway) and the errors stopped occurring. I didn't understand why the errors had occurred in the first place, and i wasn't convinced that the index was the real problem, but the errors had gone - so that was ok for the short term.
A few things still bugged me:
1. For audit purposes we maintain a copy of the table in question (populated via triggers on the live table) and this showed up consistency errors too. This led me to suspect the problem was with the data itself or the structure of the table - unfortunately there's nothing remarkable about this small, rarely updated table at all (apart from the fact that it's vital for our business!).
2. Any database built from backups of the live db consistently report errors now despite the fact that the backups were made after the problem was resolved and when dbcc checkdb reported NO errors (I maintain a number of test and olap databases in this way). What's happening here? (My guess is that the backup and restore process involves rebuilding indexes, rearranging data, etc. and this is resurrecting the problem) I couldn't help feeling that despite having apparently fixed the errors they were still lurking out there somewhere....
3. At no point did the data in the table appear to be corrupt in any way from the user perspective. This provokes two questions - is dbcc checkdb reliable at both reporting and fixing errors, and how serious are consistency errors?
After removing the suspect index everything was fine for a few weeks until this morning - when errors were again reported on the same table. After hours spent testing and playing around with this (dropping indexes, dropping or truncating the table and re-populating from ascii files, etc.) i've now hit a brick wall. I still suspect the problem is related to the data itself or the structure of the table but can't get any further.....so..
Has anyone come up against a similar problem? Any suggestions for the next course of action? Can anyone point me to documentation on checkdb or consistency errors (other than what's in BOL or the MS knowledge base)?
I am getting the error: The Procedure entry point snmpsvcgetenterpriseoid could not be located in the dynamic link library snmpapi.dll at start up of my nt4 sql server box. The only thought to that is that I need to reinstall SNMP. But I cant find the SNMP Agent anyware for me to reinstall. If you have ever seen this and have a better idea of how to fix it or if you know were i can find the agent it would be gretly apreciated.
I have tried to make a DTS task running a batc-file on the same server as the SQL program is running using the CmdExec command.
My Command is as follows:
CmdExec serverpathatchname.bat
The problem is that everytime the step runs it report the following error:
"The system cannot find the file specified."
In the bat file I am also trying the de-map/map a network drive with another loginname/password than the one used on the SQL-server -> is this i problem?
Hope to hear from you soon, this is a bit urgent!!
Please provide tips to this adresse: qtip@bigfoot.com
I'm running SQL 7.0 with SP2 applied. I have a database that I'm trying to replicate over the Internet.
I'm having a problem getting the initial snapshot. The total amount of data in the snapshot is 3GB. One .bcp file is 2GB and another is roughly 900MB. There are also a few smaller files.
I have my publisher and distributor setup correctly as well as my subscription. I have tested with smaller datasets. Near as I can tell, there is a problem with my files being too big. I get all the .sch files. The first .bcp file is the 2GB file.
I have tried replicating to another server on my LAN (100base-T) and get the same error.
I don't have the exact error, but it's something like: 'Failed to get file sql01_data1_data120000601105138igfile.bcp'
In my FTP Log, I see that transfer was started then aborted.
Any help on how to deliver large amounts of data over FTP would be greatly appreciated.
I have the following severity errors 19-25. I am a new using to SQL Server 7.0 and would like some advice in dealing with these errors. I am going to run the DBCC CHECKDB to determine what the errors are. Is this the right approach. Thanks!!!
