Running A Vbs File As A Step Of An SqlServer Job
Dec 11, 2007
Hi
I have a VBScript file which runs fine when I click it or when I run it
from a command prompt level.
I added it as the 1st step of an SqlServer job and the job always fails
with the error message
"Executed as user: GVIANTAdministrator. The process could not be
created for step 1 of job 0xBE3A0405EB9F624282C1A9474AA9F719 (reason: %1
is not a valid Win32 application). The step failed."
Cn anyone help me understanding this error message.
Thanks 1
David Greenberg
View 2 Replies
ADVERTISEMENT
May 27, 2008
Hi,
I have a SQL Server Agent job set up to run a job that calls a dts package on the server.
When I run the DTS Package manually, everything works fine and does what it is supposed to do.
When I run the job, The job fails. If somebody had this error can you please help me out
I am getting following error in my job...
DTSRun: Loading...Error: -2147287038 (80030002);
Provider Error: 0 (0)
Error string: The system cannot find the file specified. Error source: Microsoft Data Transformation Services (DTS) Package
Help file: sqldts.hlp
Help context: 713.
Process Exit Code 1. The step failed.
could you please let me know what is the possible cause for the above error.
Many Thanks,
Madhu
View 1 Replies
View Related
Jun 18, 2012
I want to convert .rdl to .rdc need full steps.Actually i created .rdl report using sp sucessfully.Now i want to convert it to rdlc while doing it iam getting some authentication error and some thing else.I created rdl in 2008 and i want to change it to rdlc 2010.
View 5 Replies
View Related
Jan 31, 2007
I have a package that has multiple data flow tasks. At the end of a task, key data is written into a raw file (file name stored in a variable) that is used as a data source for the next task. Each task requires a success from the preceding task.
Here's the rub:
If I execute the entire package, the results of the package (number of records of certain tasks) differs significantly from when I execute each step in the package in turn (many more records e.g. 5 vs 350).
I get the feeling that the Raw file is read into memory before it is flushed by the previous task, or that the next task begins preparation tasks too early.
Any help is greatly appreciated.
I am running on Server 2003 64 (although the same thing happens when deployed on a Server 2003 32 machine)
Thanks
B.
View 2 Replies
View Related
Jul 23, 2005
I am running SQLServer 2000 SP3 with MDAC 2.8.On instances created via MSDE, I am unable to create the first step ina job. Instances created with SQLServer 2000, this problem does notoccur.The message I am receiving on the instances created with MSDE, themessage I get immediately upon pressing the Add button to define a stepis "Error 170: Line 1: Incorrect syntax near ''"Any help would would be greatly appreciated.Wardell Castles
View 4 Replies
View Related
Jul 20, 2005
Hi,I've written a job to export user and database permissions for alld/b's on a server. As you can see below, the T-SQL commands are thesame for each d/b. Can anyone assist with regard to re-writing this sothat any new d/b's added do not require ammending the job (loop)?Thx,GC.use mastergoSELECT db_name()EXEC sp_helpuserEXEC sp_helprotect NULL, NULL, NULL, 'o s'use msdbgoSELECT db_name()EXEC sp_helpuserEXEC sp_helprotect NULL, NULL, NULL, 'o s'use test1goSELECT db_name()EXEC sp_helpuserEXEC sp_helprotect NULL, NULL, NULL, 'o s'use test2goSELECT db_name()EXEC sp_helpuserEXEC sp_helprotect NULL, NULL, NULL, 'o s'
View 1 Replies
View Related
Apr 16, 2007
I am running a stored procedure as a job step and in the stored procedure I use return to pass one of several possible values when there is an error in processing (not an system error) so that the job step will fail. However, even when I return a non-zero value using return the job step completes as successful. What should I be doing so that the job step picks up the non-zero value and then indicates the step failed?
View 3 Replies
View Related
Sep 27, 2006
MS SQL Server 2005
i get the following error when trying to run this job as user1:
'Unable to start execution of step 1 (reason: Error authenticating proxy serv1user1, system error: Logon failure: unknown user name or bad password.). The step failed.'
and the following error when trying to run the same job as 'sql agent service account':
'Executed as user: serv1user1. The process could not be created for step 1 of job 0x3653ACCFFA46DD47B3703C87DDFD0717 (reason: 2). The step failed.'
>job:
job name: job1
server: (local)
connection: net1user1
owner: serv1user1
step type: operating system (cmdexec)
run as: user1
command:@echo off
copy C: est.txt C:folder
ECHO Job completed
PAUSE
>the sql server agent service is running under 'serv1user1' and works fine for other jobs running ssis packages.
>i have created the following credentials under security/credentials:
credential name: serv1user1
identity: serv1user1
password: same as sql server agent service
>i have created a proxy under the sql server agent/operating system (cmdexec):
proxy name: user1
credential name: serv1user1
active subsystem: operating system (cmdexec)
principals (sql login): serv1user1
thank you
View 2 Replies
View Related
Jul 1, 2015
I have a SQL Agent job that runs at 4:15 in the morning. The job has 5 steps, each step only runs if the preceding step succeeds. The second step, which calls an SSIS package that does the main processing, appears to finish as it goes on to the next step; however, when looking in 'View History' there are 2 entries for this step - the first one shows it as still running (Circled Green Arrow) but with a start and end time. The second entry says the job succeeded.
I have been seeing conflicts, such as deadlocks, with later jobs. I suspect this job is causing the conflicts - maybe the package is still running in the background instead of having actually completed?
what conditions a job step my be showing in the job history as both running AND completed successfully?
View 6 Replies
View Related
May 28, 2015
In my environment, there is maintenance plan configured on one of the server and while running DBCC checkdb on a database of size around 200GB, log file usage of tempdb is increasing and causing the maintenance job to fail.
What can I do to make the maintenance job run successfully, size of the tempdb database is only 50GB and recovery model is set to simple. It cannot be increased as the mount point on which it is residing is 50GB.
View 3 Replies
View Related
Jan 18, 2008
Hi All,
Please let me know where can i find the sample files and rs2005sbsDW database in msdn library as i dont have CD provided along with the book.
Please give me the link of the sample files so that i can download it for testing the sample application.
Regards,
Prabhanjana
View 1 Replies
View Related
May 17, 2001
Hi All
Just wondering if anyone has experience with running SQL Server 7 with Citrix. We currently run Terminal Server for our business and now we are installing SQL Server 7 to run our main software package and we are being told that we should revert to a normal setup with workstations for each user rather than using our P75 terminals that we use with terminal server.
If all the procseeeing is being done by the server then surely we can just use the same low end boxes and just make sure that the server is crunching the data.
Thanks.....
View 2 Replies
View Related
Oct 13, 2006
is there such a paper? if so, can you pls point me to it? thx in advance
View 4 Replies
View Related
Oct 3, 2007
hye everyone,
after finished do the report and deploy at IIS/report manager in local pc..
i want to know , what is the step /how to deploy the report project at the user's pc/ client pc /other server..
thanks in advance
thank you very much
View 16 Replies
View Related
Aug 27, 2013
I am running sql script inside job.But sql is not saving the results in the file which i specified ('Unable to open Step output file'). I tried same thing on different server, it works fine.
Both are are 2008 R2. Is there any server level setting that i have to look at.On both servers i logged in as sa.
Why is it working on server1 ,but not on server2?
View 2 Replies
View Related
Jul 23, 2005
How do we pass on the step1 output file to step2 of the same job? Iwould like to know the current job's output file programmetically,instead of hard coding it. Any idaes would be appreciated.Thanks
View 10 Replies
View Related
Nov 15, 2007
I would like to create a log of what happens with each step in the package, at least start & start time and email that at the end of the package
Is this possible?
Thanks
JPS
View 3 Replies
View Related
Feb 5, 2001
Hello,
I read few of the archive article about this, but I would like to verify this again.
We currently have Sqlesrver 6.5 running on Intel NT 4.0.
We would like to rename the server.
Is there any problem I'll need to look out for?
I am planning to rename the Nt server and reboot.
Thanks,
yi
View 1 Replies
View Related
Oct 4, 2007
Hello All,
I am working for a company with approx. 5000 computers(Mix of Win2000+WinXP-PRO). I am asked to write some script or find some kind of tool or mehanism to scan the network to see how many PCs are running SQLServer ( Any version -- may be Desktop/Standard Edition). Is there any such way/script/tool anyone knows here . Please share your experience.
Thanks A lot.
R
View 10 Replies
View Related
Mar 2, 2008
Hi!
I hope the answer is as simple as the question -- but after reading all the documentation I could find (understand?) and a lot of posts here, I'm no closer to achieving the goal.
I have a Visual C# app, DAYTRACKER, developed in VS2005. It uses a database with several tables constructed using SQL Server 2005 Developer Edition.
I want to deploy the app plus the database plus SQL Express to another machine, to be used by a single user (the administrator) with no need for network connectivity of any kind.
What I have so far is:
1. The application is successfully deployed from a CD-ROM, having used the Publish process within VS2005, and opens on the new machine -- without database connectivity, however.
2. SQL Express is successfully deployed (it deployed as a 'prerequisite' when I went through the Publish process in VS2005)
3. I manually copied the database's .mdf and .mdl files, using SQL Server Managers 'Copy Database' function, then transferred the copies to the new machine into the ..MSSQL.1MSSQLdata folder (where they appear along with the master.mdg, mastlog.ldf etc files)
Now, the DAYTRACKER application's DAYTRACKERConnectionString under 'Settings' in the VS2005 studio reads 'Data Source=DELL3;Initial Catalog=DayTracker;Integrated Security=True' (which are the appropriate parameters for the machine, DELL3, on which I wrote the program.)
The problem, of course, is that SQL Express on the new machine doesn't connect the application to the database. When I go to the 'SQL Server Configuration Manager' and go to the 'SQL Server 2005 Services' and double-click on the 'SQL Server (SQLEXPRESS)' icon (the service is running) and the user is logged on using 'Local System Account'. Under the 'Service' tab the Host Name is 'MUSIC' (which is the name of the new machine I've installed the app onto -- which of course is not the name - DELL3 - that the app's connection string is expecting). Under the 'Advanced' tab, I've tried correcting the name of the Startup Parameters default .mdf and .mdl entries to ..DayTracker.mdf and ..DayTracker_log.mdl, but the server won't start up after I make the changes.
What I'm hoping for: a step-by-step way of doing this type of deployment, preferable getting it all onto one CD-ROM, and installing it on the new machine so that it all works seamlessly from the start, not requiring any 'tweaking' of the SQLServer Express settings by the end-user.
But I'll take pretty much anything that fixes the specific db connectivity problem I've described.
Thank you very much.
John F.
View 11 Replies
View Related
Jun 24, 2007
When I try to give myself administrative rights SQL presents me with the following error message:
TITLE: .Net SqlClient Data Provider------------------------------An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476------------------------------BUTTONS:OK------------------------------
This isn't just only a problem with the administrative rights. This happens in many different places such as when I try and add a new data source in VB Express 2005 it gives approximately the same error message.
My MSSQLSERVER service is running nicely but my SQLSERVER isn't and on top of that I can't get it to start!
If anybody can help me out here I would really grateful.
Thanks.
--------------------------------------------------------------------------------------------------------------
OK. I fixed that with the help of another thread that was similar except now this message is coming to haunt me:
TITLE: System.Data------------------------------Instance failure.------------------------------BUTTONS:OK------------------------------
I'm purely guessing this is related my SQLSERVER service not running but that is purely a guess. Getting back to the problem I have no clue how to fix it!
Please help!
View 3 Replies
View Related
Aug 27, 2013
I am running sql script inside job.But sql is not saving the results in the file which i specified('Unable to open Step output file'). I tried same thing on different server, it works fine.Both are are 2008 R2.Is there any server level setting that i have to look at.On both servers i logged in as sal. Why is it working on server1 ,but not on server2?
View 6 Replies
View Related
Jun 22, 2007
When adding an SSIS step to a SQL Server Agent job, when selecting the location of a config file, the dialog lets you select from the database server you're working with. If selecting the location of the package itself (when the source is File System), the dialog lets you select from the machine where Management Studio is sitting instead of from the database server. Is that intentional? And if so, why? Should I just use a fully qualified file name for the package location rather than one using a drive letter?
View 3 Replies
View Related
May 19, 2008
Hi,
I have to transport a big database table and can't read it at once with "select * from table" because the table is bigger than my system memory.
Is there a way to read the table step by step? I thought it was possible with ADO and his serverside cursors but I don't now how. I need an "universal" solution that works on SQL Server 2000/2005, MySQL and Oracle.
Regards,
harry
View 2 Replies
View Related
Dec 5, 2007
Connecting to a networked SQL Server Box from my local machine
Open Query Analyzer from Start menu, logging in using sa account.
from the object browser i select my stored procedure (WEA_InsertClaim) - right click and select Debug.
i am prompted to enter the parameter values, which i do, auto rollback checkbox is checked - click Execute.
T-SQL Debugger opens and runs through the stored procedure.
but only buttons enabled are the "Go", "Toggle Breakpoint", "Clear All Breakpoints"
so i can set breakpoints etc. but when i select Go it will not stop at the breakpoints it just runs through the stored procedure from start to finish. giving the correct return code as its output
is there something i need to enable in order to make it stop at breakpoints??
Cheers,
Craig
View 3 Replies
View Related
Nov 15, 2007
Hello,
I am totally confused by what account I should be running my sql server database and my business layer service as.
I take it that when installing sqlserver and my service that I should be logged in as administrator.
Should I be using "Local Service", "Local System" or "Network Service" to run these processes as?
Summary of my business layer service
* Clients connect to this service on a tcp/ip port
* It accesses the file system
* it connects to the database
Thanks,
JP
View 4 Replies
View Related
Sep 23, 2014
I have created a Test SSIS Package within BIDS (VS 2K8, v 9.0.30729.4462 QFE; .NET v 3.5 SP1) that connects to our Test Listener.
There is only 1 Connection Manager Object, and OLE DB Provider for SQL Server.
The ConnectionString lists: Provider=SQLOLEDB.1;Integrated Security=SSPI
The Test Connection within BIDS works.
The Package Control Flow has just 1 Object, and Execute SQL Task that performs an Exec on an SP that contains only a Select (Read).
The Package runs within BIDS.
I've placed this Package within a Job on the Primary Node. Ive run the job successfully using 32 bit runtime on and off. The location of the file on the server happens to be on a share that resides on what is currently the Secondary Node.
When I try to run the exact copy of this Job on the Secondary Node (Which has been Set up for Read All Connections; Yes), I get an error, regardless of the 32 bit runtime opiton. At this point, the location of the file is on the Secondary Node.
The Error is: "Login failed for user 'OurDomainAgent_Account'".
The Agent is a member of NT ServiceSQLServerAgent on both instances, and that account is a member of SysAdmin. Adding the Agent account as well, and giving that account SysAdmin, makes no difference either.
Why can't I get this to work?
View 1 Replies
View Related
Apr 24, 2007
Hi,
I am looking for tutorials about how to create dts et dtsx files.
Thanks for your help.
Arioule.
View 1 Replies
View Related
Feb 15, 2006
Is there a good step by step guide to setting up an indirect configuration? I've followed the steps in Kirk Haselden's 'Keep your packages in the dark' article 3 or 4 times this afternoon and nothing seems to work. I cannot even get the XML configuration file to work by accessing it directly. I'm using the wizard to create the file.
Just wondering if there was something else out there....
Thanks in advance for any help.
MarkA
View 3 Replies
View Related
Mar 12, 2008
Hi
I posted this on the sql server security forums too. Here is the error that i get when i change the type of the step to ssis
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
Additional information:
An exception occured while executing a Transact-SQL statement or batch.
(Microsoft.SqlServer.ConnectionInfo)
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.(Microsoft SQL Server, Error: 3930)
This error pops up right after i change the type of the step to "SQL Server Intergration Services Package"
I have made the following configurations:
The user group (windows group) that the user belongs has the following roles in msdb :
db_dtsadmin
db_dtsltuser
db_dtsoperator
SQLAgentOperatorRole
SQLAgentReaderRole
SQLAgentUserRole
i have made a proxy to sql server agent which has the following subsystems :
"SQL Server Integration Services Provider" the proxy is tied to the same login which has those SQLagent and dts roles in msdb database.
Im using windows authentication and the user that logs into the sql server is in the same group that i have set all of the rights.
Ps. Clearly im missing some role or right somewhere because as soon as i give the group sysadmin role then all the users in that group can create SSIS steps in the agent.
Ps. Ps. I have been living under the impression that i dont have to give sysadmin rights to people that create ssis packages and schedule then with the agent.
View 3 Replies
View Related
Jan 27, 2006
I have smilar kind of an issue with replication. I had sucessfully done replication with Sqlce2.0 on sql server 2000. In development machine I had VS 2003, sqlce development tools.
Now I use the same code done in VS 2003 into VS2005, it sucessfully converted the code.
In server machine (win 2003) I installed sql server 2000, sql server 2000 service pack 4, SP4 merge replication components, sql server 2005 mobile server tools and .Net framework 2.0. Created pubication sucessfuly. In this machine I configured IIS as per the web synchronization wizard. Gave anyonymous permissions. Virual direcory is created sucessfully. I tested the server agent in IE http://myservername/aliasname/sqlcesa30.dll.
SQL Server Mobile Server Agent 3.0 is shown
My application opened successfuly in windows mobile 5.0 Pocket PC emulator. When try to sync its dislays error "A request to send data to the computer running IIS is failed, see Hrresult"
No firewall in both development and server machines.
The same code works if its sqlce20 perfectly with vs2003 code. Not in this
Can anyone tell me whats wrong in this?
Regards
Arif
View 5 Replies
View Related
Apr 26, 2007
I am trying to learn Reporting Services using the title "MS SQL Server 2005 Reporting Services Step by Step" by Stacia Misner and Hitachi Consulting, published in 2006. I am experiencing problems with some of the exercises. I got as far as Chapter 4 when I followed directions to create a SQL statement to define a query string for a dataset. Pg 80:
select * from vProductProfitability
where year = 2003 and
MonthNumberOfYear = 1
The view vProductProfitability does not exist in the tutorial database that came with the book, rs2005sbsDW. The result of this query is the basis for the entire chapter on developing basic reports and I'm being denied a learning opportunity because the view does not exist. In short, I'm stuck.
I have tried to find somewhere at Microsoft to place this question and get some answers so I can continue thru the tutorial. To no avail. Does anyone have any suggestions?
BTW, the solution that came in the CD is also wrong because the query noted above is also in the solution.
This humble grasshopper seeks wisdom.
Respectfully Submitted,
Dave Matthews
Atlanta, GA
aka FlooseMan Dave
View 17 Replies
View Related
Sep 13, 2007
Dear Experts,
please guide me for replcation.....
i'm using sql server 2005 server tools developer edition. my OS is professional 2000.
and i've sqlserver 2000 client tools also
i've two databases in my machine. publisher is in different instance, and the transactions might be maximum 50 per day. my aim is when ever developer enters the data into the main database, automatically it should be updated on the my two databases also.
i mean the server is sysA and the database is srtp.
my machine is sys20 and the databases are srtp1, srtp2.
how should i make sysA as publisher?
i've right click on the server databases, but it is showing newsubscriptions option only.
Vinod
Even you learn 1%, Learn it with 100% confidence.
View 8 Replies
View Related
