Same Connection String Succeeds From XP, Fails On Vista
Jul 12, 2007
From an XP machine I can get a connection using a Widnows Authentication connection string:
oConnection.ConnectionString="Driver={SQL Server};SERVER=RANDY3PPServer;DATABASE=PPData;UID=;PWD=;"
ret=oConnection.Open
from the Vista machine hosting SQL server express the same connection string fails, but succeeds if the database is changed to master
oConnection.ConnectionString="Driver={SQL Server};SERVER=RANDY3PPServer;DATABASE=master;UID=;PWD=;"
ret=oConnection.Open
How can this be and how do I fix it?
View 3 Replies
ADVERTISEMENT
Mar 4, 2008
Hi All,
We are using the Windows Task Scheduler as a substitute for the SQL Server Agent, which isn't available in the Express edition. The scheduled task just calls a batch file, which in turn, runs a stored procedure using osql with the -E option for a Trusted Connection.
SQL Server Express has been installed using the defaults, which means the service is running in the "NT AUTHORITYNETWORK SERVICE" account. The scheduled task we create is set to run using the "NT AUTHORITYSYSTEM" account.
Now we find that on Windows Vista (tested using Ultimate Edition) that the scheduled task fails to run the stored procedure until the machine is rebooted the first time after installing SQL Server Express. When I say "fail", I mean that the stored procedure isn't executed. The scheduled task however completes and reports no errors. On Windows XP, we do not run into this problem so I suspect it has something to do with the UAC in Vista?
We further found that after installing SQL Server Express and creating the scheduled task in the "NT AUTHORITYNETWORK SERVICE" account, the scheduled task (and stored procedure) runs fine WITHOUT requiring a reboot.
Can anyone explain why a reboot is needed to get SQL Server Express to run the scheduled task correctly under Windows Vista and the SYSTEM account?
Any help or thoughts greatly appreciated.
View 2 Replies
View Related
Mar 21, 2006
My client has a number of jobs that are run overnight. We've set themup to email me when they're completed. Every morning I get in to abunch of emails like this:<quote>JOB RUN:'Tech Pubs Email Notification' was run on 18/03/2006 at00:00:00DURATION:0 hours, 0 minutes, 0 secondsSTATUS: SucceededMESSAGES:The job succeeded. The Job was invoked by Schedule 10 (SendMail). The last step to run was step 1 (Send Mail).</quote>However, the most important job - the database backup - fails everytime.<quote>JOB RUN:'DB Backup Job for DB Maintenance Plan 'DB Maintenance Plan1''was run on 20/03/2006 at 18:00:00DURATION:0 hours, 0 minutes, 2 secondsSTATUS: FailedMESSAGES:The job failed. The Job was invoked by Schedule 7 (Schedule1). The last step to run was step 1 (Step 1).</quote>What's strange is that the job runs successfully if you kick it offmanually (in EM: right-click and "Start Job")!!! Does anyone have anyidea of why that might be? Where to look for diagnostic information?TIAEdward
View 6 Replies
View Related
Mar 4, 2008
Hello,I am trying to bulk copy some data from a text file to SqlServer. In my case, the table in SqlServer is simple. It has two columns: Symbol <nchar(5), Primary Key> and Company <nvarchar(50)>. Each row in the text file is Symbol and Company separated by a "#". Below is the code of my bulk copy: public static void StartImport(string sourceFile) { SqlBulkCopy bulkCopy = new SqlBulkCopy(connString_local, SqlBulkCopyOptions.TableLock); bulkCopy.DestinationTableName = "dbo.NasdaqSymbols"; DataTable dt = CreateSymbolDataTable(sourceFile); bulkCopy.WriteToServer(dt); } private static DataTable CreateSymbolDataTable(string filePath) { DataTable dt = new DataTable(); DataColumn dc; DataRow dr; dc = new DataColumn(); dc.DataType = Type.GetType("System.String"); dc.ColumnName = "Symbol"; dc.Unique = true; dt.Columns.Add(dc); dc = new DataColumn(); dc.DataType = Type.GetType("System.String"); dc.ColumnName = "Company"; dc.Unique = false; dt.Columns.Add(dc); StreamReader sr = new StreamReader(filePath); string input; while ((input = sr.ReadLine()) != null) { string[] s = input.Split(new string[] { "#" }, StringSplitOptions.None); dr = dt.NewRow(); dr["Symbol"] = s[0].Trim(); dr["Company"] = s[1].Trim(); dt.Rows.Add(dr); } sr.Close(); return dt; } The problem is, I got the following exception when I tried to call my StartImport method (thrown from SqlBulkCopy.WriteToServer): System.InvalidOperationException: The given value of type String from the data source cannot be converted to type nvarchar of the specified target column. It turned out that the problem seems not to be String to nvarchar; because when I use a source text file which contains only about a dozen of rows, it works! I have no idea why SqlBulkCopy.WriteToServer works fine on a small set of data. Or is there something I overlooked? Thank you for time and help.Gary
View 2 Replies
View Related
Jun 11, 2007
I did a small package with only one ODBC connection (Merant 3.70 32-Bit Progess). This package runs well in Visual Studio and fails when runs by SQL Server Agent.
Configuration:
SQL Server Agent on a 32Bit server.
The ODBC connection configuration in available on System DSN on this server.
The user of Server Agent have full access (Admin).
Connect Manager Provider: ".Net ProvidersOdbc Data Provider"
SQL Server version: 9.0.3042
Error Message:
Executed as user: TEKCON cadmin. ...ion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 16:50:33 Error: 2007-06-11 16:50:33.62 Code: 0xC0047062 Source: Data Flow Task DataReader Source [1] Description: System.Data.Odbc.OdbcException: ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcCon... The package execution fa... The step failed.
I created a .bat file with this instruction and It's run well:
dtexec /f "C:Program FilesMicrosoft SQL Server90DTSPackagesIntegration Services Project estcom.dtsx"
pause
Why it's not running with SQL Server Agent???
View 7 Replies
View Related
Nov 24, 2006
Hi all!
I couldn't manage to install SQL Server 2005 Express or Standart Edition on Windows Vista. The installation fails with the error message I pasted below:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
SQL Server Setup failed to execute a command for server configuration. The error was [Microsoft][SQL Native Client][SQL Server]Windows NT user or group 'FUSIONSQLServer2005MSSQLUser$FUSION$MSSQLSERVER' not found. Check the name again.. Refer to the server error logs and Setup logs for detailed error information.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=setup.rll&EvtID=29521&EvtType=lib%5codbc_statement.h%40Do_sqlScript%40OdbcStatement%3a%3aexecute_batch%40CnfgSQL%4080%40x3c29
Can someone please help me on this as this is an urgent situation...
Thanks in advance
Derya
View 8 Replies
View Related
Oct 9, 2007
We have an application (.Net 2.0) which installs SQL database.
It installs database sucessfully but when I try to connect the databse using other components of the application,
it fails to connect the database.
Everything works fine if I login as username:"Administrator". or UAC off.
I know in vista when UAC on memeber of admin is considered as standard user.
I got solution to add user in sysadmin role.
http://msdn2.microsoft.com/en-us/library/bb326612.aspx
http://support.microsoft.com/kb/929907
It is per user settings. We want some integrated solution. So our customers wouldn't need to do per user settings.
This is urgent. please help...
Thanks.
View 5 Replies
View Related
Jul 9, 2007
I have written a custom executable thats purpose is to find and uninstall a named instance. It works as intended on PC's running XP and Vista with UAC turned off. However when I try to run the exe on a Vista Machine with UAC on, it does not fully remove the named instance.
It leaves behind in the folder path: "C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQL" three folders: "Data", "LOG", and "Template Data". However it does remove all of the registry entries and all of the services attached to that named instance.
Why oh why does it have permission to remove everything else besides these 3 folders, and how (programmatically) can I give it the proper admin rights?
the code that does all the work from the cmd:
msiexec /x "ProductCode" /passive
The removal of these three folders is important b/c when you try to reinstall the namedinstance it gives an error message saying files already exist inside the "Data" Folder.
View 3 Replies
View Related
Feb 22, 2007
During the install, I get the following message:
Setup has detected a problem with Microsoft .Net Framework installation and cannot proceed. Microsoft .Net Framework 2.0 is either not installed on this system or is corrupt.
I cannot uninstall 2.0, as its part of the Vista. I have tried repairing it.
I tried downloading 2.0 and installing it, but it says that its allready installed.
I was able to install Visual Studio with Sql Server 2005 express.
I am stuck. Is the case that Sql install dosent know about the latest version of 2.0 that came with vista ?
View 38 Replies
View Related
Feb 27, 2007
Hello,
I'm trying to install a version of SQL server 2005 with reporting services on a vista 64 bits.
I've a licence for SQL server 2005 standard edition in French, my vista is in French, and I'm using visual studio standard edition in English to develop. I would like to develop reports using SQL server to include these reports in my applications developped with Visual Studio.
Wich version of SQL server should I install ? I've tryed to install SQL server express 2005 with advanced feature SP2 (english version) and then later the standard edition (French version) (each time uninstalling all SQL server components between tries), but I got problems with reporting services each time.
I got first a warming saying than reporting services is 32 bits and IIS is 64 bits, I so allowed IIS to run 32 bits ASP .Net, but after that, I now get a problem of .Net registration in IIS as warming message on the line concerning Reporting services during the install of SQL Server, and it doesn't even offer to install RS on the next window.
I reinstalled the DotnetFX64 to be sure, but still get the same message. If I look in the IIS the application pools are looking me to be normal, with the ASPNET 32 bit code allowed.
View 11 Replies
View Related
May 30, 2006
Installation of MSDE 2000 fails on 64-bit Windows Vista (Build 5308).
The error message is "Setup failed to configure the server.Please refer the error logs for more information". No error log can be found on the machine at the time of installation. Please let me know if anyone else has encountered this problem?
Is it possible to install MSDE 2000 on 64-bit Windows Vista(Build 5308)?
Thanks in advance.
View 4 Replies
View Related
Feb 1, 2008
I need some help please. I've got SQL 2K (default instance) and SQL 2005 Express installed on Vista Ultimate. I want to upgrade the 2K instance to 2005 Developer. I ran this from the command prompt:
D:ENGLISHSQL2005DEVELOPERSQL Server x86Servers>setup.exe ADDLOCAL=All SKUUP
GRADE=1 UPGRADE=SQL_Engine INSTANCENAME=MSSQLSERVER
This is the error message I received (from Summary):
--------------------------------------------------------------------------------
Machine : HPMEDIACENTER
Product : SQL Server Database Services
Error : SQL Server Setup cannot upgrade the instance because the uninstall file is missing or corrupted. The error code is (87) The parameter is incorrect.
--------------------------------------------------------------------------------
Machine : HPMEDIACENTER
Product : Microsoft SQL Server 2005
Product Version : 9.00.1399.06
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0003_HPMEDIACENTER_SQL.log
Last Action : ValidateUpgrade
Error String : SQL Server Setup cannot upgrade the instance because the uninstall file is missing or corrupted. The error code is (87) The parameter is incorrect.
Error Number : 29523
--------------------------------------------------------------------------------
From the Log:
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): RSVirtualDirectoryManager = Reports
Property(S): RSVirtualDirectoryServer = ReportServer
Property(S): SqlActionManaged = 3
Property(S): SqlStateManaged = 2
Property(S): Sql_sqlSqlUpgradeSequence = 714057000
MSI (s) (14:5C) [22:19:35:714]: Product: Microsoft SQL Server 2005 - Update 'Hotfix 3024 for SQL Server Database Services 2005 ENU (KB000000)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0003_HPMEDIACENTER_SQL.log.
MSI (s) (14:5C) [22:19:35:718]: Windows Installer installed an update. Product Name: Microsoft SQL Server 2005. Product Version: 9.00.1399.06. Product Language: 1033. Update Name: Hotfix 3024 for SQL Server Database Services 2005 ENU (KB000000). Installation success or error status: 1603.
MSI (s) (14:5C) [22:19:35:719]: Note: 1: 1708
MSI (s) (14:5C) [22:19:35:719]: Product: Microsoft SQL Server 2005 -- Installation failed.
MSI (s) (14:5C) [22:19:35:719]: Windows Installer installed the product. Product Name: Microsoft SQL Server 2005. Product Version: 9.00.1399.06. Product Language: 1033. Installation success or error status: 1603.
MSI (s) (14:5C) [22:19:35:720]: Attempting to delete file C:WindowsInstaller1dcfcb3.msp
MSI (s) (14:5C) [22:19:35:720]: Unable to delete the file. LastError = 32
MSI (s) (14:5C) [22:19:35:733]: Cleaning up uninstalled install packages, if any exist
MSI (s) (14:5C) [22:19:35:733]: Attempting to delete file C:WindowsInstaller1dcfcb3.msp
I can't locate anything more about Hotfix 3024...maybe it's in Area 51. Or Studio 54. Or Blink 182...
Should I attach the logs? TIA
John
View 5 Replies
View Related
Nov 18, 2006
When I was trying to SQL Server 2005 Express SP2 (November CTP) on Vista RTM, setup failed on the Database Services component with the following log messages:
SQL service MSSQL$SQLEXPRESS started successfully waiting for SQL service to accept client connectionsService MSSQL$SQLEXPRESS started at Sat Nov 18 09:21:28 2006SQL_SUCCESS_WITH_INFO (1) in OdbcConnection::connectsqlstate=01000, level=-1, state=-1, native_error=5701, msg=[Microsoft][SQL Native Client][SQL Server]Changed database context to 'master'.sqlstate=01000, level=-1, state=-1, native_error=5703, msg=[Microsoft][SQL Native Client][SQL Server]Changed language setting to us_english.SQL_SUCCESS_WITH_INFO (1) in OdbcStatement::execute_batchsqlstate=01000, level=0, state=1, native_error=5701, msg=[Microsoft][SQL Native Client][SQL Server]Changed database context to 'master'.SQL_SUCCESS_WITH_INFO (1) in OdbcStatement::execute_batchsqlstate=01000, level=0, state=1, native_error=15457, msg=[Microsoft][SQL Native Client][SQL Server]Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install.SQL_SUCCESS_WITH_INFO (1) in OdbcStatement::execute_batchsqlstate=01000, level=0, state=1, native_error=15457, msg=[Microsoft][SQL Native Client][SQL Server]Configuration option 'default language' changed from 0 to 0. Run the RECONFIGURE statement to install.sqlstate=01000, level=0, state=1, native_error=15457, msg=[Microsoft][SQL Native Client][SQL Server]Configuration option 'default full-text language' changed from 1033 to 1033. Run the RECONFIGURE statement to install.SQL_SUCCESS_WITH_INFO (1) in OdbcStatement::execute_batchsqlstate=01000, level=0, state=1, native_error=15457, msg=[Microsoft][SQL Native Client][SQL Server]Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install.SQL_ERROR (-1) in OdbcStatement::execute_batchsqlstate=42000, level=11, state=1, native_error=15401, msg=[Microsoft][SQL Native Client][SQL Server]Windows NT user or group 'TEHBOXSQLServer2005MSSQLUser$TEHBOX$SQLEXPRESS' not found. Check the name again.sqlstate=42000, level=16, state=1, native_error=15007, msg=[Microsoft][SQL Native Client][SQL Server]'TEHBOXSQLServer2005MSSQLUser$TEHBOX$SQLEXPRESS' is not a valid login or you do not have permission. Error Code: 0x80073c29 (15401)Windows Error Text: Source File Name: libodbc_statement.hCompiler Timestamp: Wed Aug 2 16:21:02 2006 Function Name: OdbcStatement::execute_batch@CnfgSQL@80Source Line Number: 91---- Context -----------------------------------------------Connecting to SQL ServerExecuteSqlCommandsUSE [master ]<Started SQL statement: Sat Nov 18 09:21:28 2006>declare @ServerName nvarchar(255) if not exists (select * from sysservers) begin select @ServerName = Convert(nvarchar(255), SERVERPROPERTY(N'ServerName')) execute sys.sp_addserver @ServerName, local end<Finished SQL statement: Sat Nov 18 09:21:28 2006><Started SQL statement: Sat Nov 18 09:21:28 2006>ALTER DATABASE model SET RECOVERY SIMPLE<Finished SQL statement: Sat Nov 18 09:21:28 2006><Started SQL statement: Sat Nov 18 09:21:28 2006>EXEC sp_configure N'show advanced options', 1 RECONFIGURE WITH OVERRIDE<Finished SQL statement: Sat Nov 18 09:21:28 2006><Started SQL statement: Sat Nov 18 09:21:28 2006>DECLARE @Name AS nvarchar(128), @LangID AS smallint SELECT @Name=name, @LangID=langid FROM syslanguages WHERE lcid=1033 EXEC sp_defaultlanguage N'sa', @Name EXEC sp_configure N'default language', @LangID EXEC sp_configure N'default full-text language', 1033 RECONFIGURE WITH OVERRIDE<Finished SQL statement: Sat Nov 18 09:21:28 2006><Started SQL statement: Sat Nov 18 09:21:28 2006>EXEC sp_configure N'show advanced options', 0 RECONFIGURE WITH OVERRIDE<Finished SQL statement: Sat Nov 18 09:21:28 2006><Started SQL statement: Sat Nov 18 09:21:28 2006>EXEC sys.sp_grantlogin N'BUILTINAdministrators' EXEC sys.sp_addsrvrolemember N'BUILTINAdministrators', N'sysadmin'<Finished SQL statement: Sat Nov 18 09:21:28 2006><Started SQL statement: Sat Nov 18 09:21:28 2006>EXEC sys.sp_grantlogin N'NT AUTHORITYSYSTEM' EXEC sys.sp_addsrvrolemember N'NT AUTHORITYSYSTEM', N'sysadmin'<Finished SQL statement: Sat Nov 18 09:21:28 2006><Started SQL statement: Sat Nov 18 09:21:28 2006>EXEC sys.sp_grantlogin N'TEHBOXSQLServer2005MSSQLUser$TEHBOX$SQLEXPRESS' EXEC sys.sp_addsrvrolemember N'TEHBOXSQLServer2005MSSQLUser$TEHBOX$SQLEXPRESS', N'sysadmin'Originial error was 80073c29 (15401)Do_sqlScriptSqlScriptHlprError Code: 15401MSI (s) (98:50) [09:21:30:219]: I/O on thread 3236 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 3300 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 3652 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 3424 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 3244 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 3544 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 3064 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 3428 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 2000 could not be cancelled. Error: 1168MSI (s) (98:50) [09:21:30:219]: I/O on thread 1740 could not be cancelled. Error: 1168MSI (s) (98!78) [09:21:30:219]: Product: Microsoft SQL Server 2005 -- Error 29521. SQL Server Setup failed to execute a command for server configuration. The error was [Microsoft][SQL Native Client][SQL Server]Windows NT user or group 'TEHBOXSQLServer2005MSSQLUser$TEHBOX$SQLEXPRESS' not found. Check the name again.. Refer to the server error logs and Setup logs for detailed error information.Error 29521. SQL Server Setup failed to execute a command for server configuration. The error was [Microsoft][SQL Native Client][SQL Server]Windows NT user or group 'TEHBOXSQLServer2005MSSQLUser$TEHBOX$SQLEXPRESS' not found. Check the name again.. Refer to the server error logs and Setup logs for detailed error information.
TEHBOXSQLServer2005MSSQLUser$TEHBOX$SQLEXPRESS exists and contains NT AUTHORITYNETWORK SERVICE when the error occurs.
Any suggestions on how to get SQL Server to install on Vista?
View 4 Replies
View Related
Aug 23, 2006
I added a connection (ADO.NET) object by name testCon in the connection manager - I wanted to programmatically supply the connection string. So I used the "Expressions" property of the connection object and set the connectionstring to one DTS variable. The idea is to supply the connection string value to the variable - so that the connection object uses my connection string.
Then I added a "Backup Database Task" to my package with the name BkpTask. Now whenever I try to set the connection property of BkpTask to the testCon connection object, by typing testCon, it automatically gets cleared. I am not able to set the connection value.
Then after spending several hours I found that this is because I have customized the connection string in testCon. If I don't customize the connection string, I am able to enter the "testCon" value in the connection property of the BkpTask.
Is this an intrinsic issue?
View 2 Replies
View Related
May 8, 2007
I have recently updated from XP to Vista Home Premium. Now when I try to install SQL Serve Express SP2 I get :
"setup has detected problem with .net framework installation
and cannot proceed. Microsoft .net framework 2.0 is either not installed or
is corrupt."
I have tried to run sfc /scannow to make sure my .NET 2.0 was not corrupted and also was running as an administrator but could not get it installed. Anyone has any ideas?
View 1 Replies
View Related
Feb 7, 2008
I'll install SQL Server Express SP2 on Vista during my Setup.
But the setup beaks with error 110.
In other articles it sounds like an folder access problem.
On a Custom Action Type 210 i start a application which execute the sqlexpress.exe.
I tried some other codes to impersonate or noImersonate but without success.
But i can not use the unpacked files because size is to large(170MB)
An good Idea would be unpack the setup files during setup to an custom folder with right permissions.
But I dont know how unpack files without GUI (SQLEXPRESS x always show the GUI).
Any Idea???????????
Here are the corresponding logfiles:
------------------------------------------------------------------------------------------------
Core.log
...
Unattended=true
WorkDir=e:a3d45fa9ced92ee76a8e8275
}} {e:sql9_sp2_tsqlsetupsqlcudllscusetupmgr.cpp:384}
SCU_SetupMgr::InstallComponent state=INSTALL, cancel_state=0, is_done=0, ActionRequired=1, NeedReboot=0, custom_props={AutoStart=true
DotNetPatch=
HandleReboots=false
ModuleDir=e:a3d45fa9ced92ee76a8e8275
QuietMode=true
SNACPatch=
SupportPatch=
Unattended=true
WorkDir=e:a3d45fa9ced92ee76a8e8275
}} {e:sql9_sp2_tsqlsetupsqlcudllscusetupmgr.cpp:384}
<Func Name='SnacComp::InstallImp'>
Failed to install SNAC
Failed to install SNAC : (110) {e:sql9_sp2_tsqlsetupsqlcudllsnaccomp.cpp:251}
SCU_SetupMgr:vc() caught exception: Failed to install SNAC : (110) {e:sql9_sp2_tsqlsetupsqlcudllsnaccomp.cpp:251}. SetupMgr: state=ERROR, cancel_state=0, is_done=0, ActionRequired=1, NeedReboot=0, custom_props={AutoStart=true
DotNetPatch=
HandleReboots=false
ModuleDir=e:a3d45fa9ced92ee76a8e8275
QuietMode=true
SNACPatch=
SupportPatch=
Unattended=true
WorkDir=e:a3d45fa9ced92ee76a8e8275
}} {e:sql9_sp2_tsqlsetupsqlcudllscusetupmgr.cpp:520}
<EndFunc Name='UpdateComponents' Return='1603' GetLastError='0'>
Component update returned a fatal error : 110
Error Code: 0x8007006e (110)
Windows Error Text: Das System kann das angegebene Gerät oder die angegebene Datei nicht öffnen.
Source File Name: sqlncli.msi
Compiler Timestamp: Thu Oct 5 12:22:33 2006
Function Name: Unknown
Source Line Number: 1583
Error: Failed to add file :"E:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_DEVELOPMENT-PC_.NET Framework 2.0.log" to cab file : "E:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSqlSetup0001.cab" Error Code : 2
Running: UploadDrWatsonLogAction at: 2008/1/7 8:3:25
Failed to launch Watson with error code : 123
Message pump returning: 110
-----------------------------------------------------------------------------------------------------------------------------------------------
SNAC.log
=== Verbose logging started: 07.02.2008 08:03:24 Build type: SHIP UNICODE 4.00.6000.00 Calling process: E:Windowssystem32msiexec.exe ===
MSI (c) (ACC) [08:03:24:840]: Resetting cached policy values
MSI (c) (ACC) [08:03:24:840]: Machine policy value 'Debug' is 0
MSI (c) (ACC) [08:03:24:840]: ******* RunEngine:
******* Product: e:a3d45fa9ced92ee76a8e8275setupsqlncli.msi
******* Action:
******* CommandLine: **********
MSI (c) (ACC) [08:03:24:840]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (ACC) [08:03:24:840]: Grabbed execution mutex.
MSI (c) (ACC) [08:03:24:871]: Cloaking enabled.
MSI (c) (ACC) [08:03:24:871]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (ACC) [08:03:24:903]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (E4:98) [08:03:24:918]: Grabbed execution mutex.
MSI (s) (E4:5C) [08:03:24:918]: Resetting cached policy values
MSI (s) (E4:5C) [08:03:24:918]: Machine policy value 'Debug' is 0
MSI (s) (E4:5C) [08:03:24:918]: ******* RunEngine:
******* Product: e:a3d45fa9ced92ee76a8e8275setupsqlncli.msi
******* Action:
******* CommandLine: **********
MSI (s) (E4:5C) [08:03:24:918]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (E4:5C) [08:03:24:934]: SRSetRestorePoint skipped for this transaction.
MSI (s) (E4:5C) [08:03:24:934]: Note: 1: 1402 2: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer 3: 2
MSI (s) (E4:5C) [08:03:24:934]: Note: 1: 1309 2: 5 3: e:a3d45fa9ced92ee76a8e8275setupsqlncli.msi
MSI (s) (E4:5C) [08:03:24:949]: MainEngineThread is returning 110
MSI (s) (E4:98) [08:03:24:949]: No System Restore sequence number for this installation.
Das System kann das angegebene Gerät oder die angegebene Datei nicht öffnen.
MSI (c) (ACC) [08:03:24:949]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (ACC) [08:03:24:949]: MainEngineThread is returning 110
=== Verbose logging stopped: 07.02.2008 08:03:24 ===
Regards Sven
View 1 Replies
View Related
Mar 13, 2007
Hi
We have a problem installing SQL Express Edition SP1 on Vista. The installation stops during installation of setup support files with the following message:
Errors occurred during the installation:Error 2 installing Microsoft SQL Server 2005 Setup Support Files. See log file for more detailed information.Det går inte att hitta filen. (translated: File not found)
The log file points to the support.log file with the following content:
=== Verbose logging started: 2007-03-13 17:34:23 Build type: SHIP UNICODE 4.00.6000.00 Calling process: C:cd nät40..SQLEXPRSetup.exe ===MSI (c) (C4:F4) [17:34:23:450]: Resetting cached policy valuesMSI (c) (C4:F4) [17:34:23:450]: Machine policy value 'Debug' is 0MSI (c) (C4:F4) [17:34:23:450]: ******* RunEngine: ******* Product: C:cd nät40..SQLEXPRSetupSqlSupport.msi ******* Action: ******* CommandLine: **********MSI (c) (C4:F4) [17:34:23:450]: Client-side and UI is none or basic: Running entire install on the server.MSI (c) (C4:F4) [17:34:23:450]: Grabbed execution mutex.MSI (c) (C4:F4) [17:34:23:591]: Cloaking enabled.MSI (c) (C4:F4) [17:34:23:591]: Attempting to enable all disabled privileges before calling Install on ServerMSI (c) (C4:F4) [17:34:23:607]: Incrementing counter to disable shutdown. Counter after increment: 0MSI (s) (00:10) [17:34:23:622]: Grabbed execution mutex.MSI (s) (00:1C) [17:34:23:622]: Resetting cached policy valuesMSI (s) (00:1C) [17:34:23:622]: Machine policy value 'Debug' is 0MSI (s) (00:1C) [17:34:23:622]: ******* RunEngine: ******* Product: C:cd nät40..SQLEXPRSetupSqlSupport.msi ******* Action: ******* CommandLine: **********MSI (s) (00:1C) [17:34:23:622]: Machine policy value 'DisableUserInstalls' is 0MSI (s) (00:1C) [17:34:23:669]: SRSetRestorePoint skipped for this transaction.MSI (s) (00:1C) [17:34:23:669]: Note: 1: 1402 2: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer 3: 2 MSI (s) (00:1C) [17:34:23:669]: Note: 1: 1324 2: .. 3: 1 MSI (s) (00:1C) [17:34:23:669]: MainEngineThread is returning 2MSI (s) (00:10) [17:34:23:669]: No System Restore sequence number for this installation.MSI (c) (C4:F4) [17:34:23:669]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1MSI (c) (C4:F4) [17:34:23:669]: MainEngineThread is returning 2=== Verbose logging stopped: 2007-03-13 17:34:23 ===
The funny thing here is that it works fine when the installer is run from a network share, ie \testserversetupsetup.exe but when the same folder is burned to a CD or copied to a local folder it fails. I have verified that the folders are identical.
I'm not sure what info is required to pinpoint the problem but here are some log files and a screen shot of the message.
Any help or pointers would be greatly appreciated.
Regards,
Martin
View 5 Replies
View Related
Mar 3, 2008
I have an SSIS package that has this logic:
Map drive(batch file)
For each file (csv) loop
Pump file data into sql server
Move file to "archive" directory(file system task)
Delete File (file system task)
End Loop
Unmap Drive (batch file)
The Map/unmap code is in a batch file
c:windowssystem32et use \10.10.10.10ShareName MyPassword /USER:MyUserName /YES
Unmap:
c:windowssystem32et use \10.10.10.10ShareName /DELETE /YES
Here are the results when running this package:
1. Running in BIDS on separate workstation. Everything OK.
2. Running on Server by right clicking on package in Integration Services (SSMS) and choosing "run". Everything OK
3. Running as job with SQL Agent: Package succeeds but no action was taken on the files, files in "ShareName" still there, so therefore no data pumped into SQL Server.
Now, the difference is the SQL Agent jobs are running using a domain account proxy. I'm not sure how that would affect things though--I have the tasks in the package set to fail the package if they fail, so they are not failing, the drives are being mapped o.k.
The computer with the share is non-domain, but that shouldn't matter--I am specifiying the local username and password in the batch file as you can see, and as you can see it works from the workstation in BIDS on a separate machine, and works on the server too as long as I don't run it as a job. The batch file sits on both the server and the local workstation with the same local path.
Any idea why the files aren't actioned when run as a job?
Thanks,
Kayda
View 4 Replies
View Related
Aug 13, 2007
I can't connect from a Vista Client to a SQL 2005 Server.
I have been stuck on this problem over a week so any help would be greatly appreciated.
Overview:
I cannot connect from my client (vista business) except with SQL Server Management Studio.
I have tried Red Gate SQL Compare connection from a machine running XP and it connects ok.
I have tried connecting using ODBC from another machine running Vista Home and it connects ok.
I have no problem connecting to my local SQL Server (on my client).
I have tried using Windows Auth and a SQL login.
Environment:
Both the client and server are on the same domain and the user is a domain user.
Client:
Vista Business, SQL Server 2005 SP1 Client tools and Server, RedGate tools, Visual Studio 2005 SP1
Windows Firewall ON (but have tried it off with no difference)
Norton virus protection ON ((but have tried it off with no difference)
UAC is turned off.
Server:
SQL Server 2005 SP1, Remote connections allowed over TCP/IP Port 1433 (IPAll TCP Port 1433, not dynamic)
No windows firewall, Mcaffee virus running.
I get the errors below (or similar) connecting from:
SQL Profiler
Database engine tuning advisor,
Redgate SQL Compare (or any redgate software)
Setting up an ODBC connection
Visual Studio 2005 SP1
The only application that current connects is SQL Server Management Studio!??
If I apply SQL Server 2005 SP2 to the client it stops even SQL Server Management Studio from working.
I either get the following error:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake.
When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error:0 - No process is on the other end of the pipe.)
or (if I force the port and/or method e.g. TCP:192.168.130.3,1433)
A connection was successfully established with the server, but then an error occurred during the pre-login handshake.
When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
(provider: TCP Provider, error:0 - No connection could be made because the target machine actively refused it.)
Again any help would be much appreciated as I just can not seem to solve this.
Thanks
View 1 Replies
View Related
Aug 13, 2007
I can't connect from a Vista Client to a SQL 2005 Server.
I have been stuck on this problem over a week so any help would be greatly appreciated.
Overview:
I cannot connect from my client (vista business) except with SQL Server Management Studio.
I have tried Red Gate SQL Compare connection from a machine running XP and it connects ok.
I have tried connecting using ODBC from another machine running Vista Home and it connects ok.
I have no problem connecting to my local SQL Server (on my client).
I have tried using Windows Auth and a SQL login.
Environment:
Both the client and server are on the same domain and the user is a domain user.
Client:
Vista Business, SQL Server 2005 SP1 Client tools and Server, RedGate tools, Visual Studio 2005 SP1
Windows Firewall OFF
Norton virus protection OFF
UAC is turned OFF
Server:
SQL Server 2005 SP1, Remote connections allowed over TCP/IP Port 1433 (IPAll TCP Port 1433, not dynamic)
No windows firewall, Mcaffee virus running.
I get the errors below (or similar) connecting from:
SQL Profiler
Database engine tuning advisor,
Redgate SQL Compare (or any redgate software)
Setting up an ODBC connection
Visual Studio 2005 SP1
The only application that current connects is SQL Server Management Studio!??
If I apply SQL Server 2005 SP2 to the client it stops even SQL Server Management Studio from working.
I either get the following error:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake.
When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error:0 - No process is on the other end of the pipe.)
or (if I force the port and/or method e.g. TCP:192.168.130.3,1433)
A connection was successfully established with the server, but then an error occurred during the pre-login handshake.
When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
(provider: TCP Provider, error:0 - No connection could be made because the target machine actively refused it.)
Again any help would be much appreciated as I just can not seem to solve this.
Thanks
View 1 Replies
View Related
Nov 6, 2007
Hi friends....
Plz help me out in the problem mentioned below....
Our server is Windows 2003...Sql server is SQL SERVER2000...I am trying to register this sql server from a local machine...It is showing the erroe
"SQL server registration failed because of the connection failuredisplayed below.Do you wish to register anyway?
SQL Server does not exist or access denied.
ConnectionOpen (Connect()) "
TCP/IP and Named Pipes are the enabled protocols in Both Server and Client network Utilities.
Local machine configuration is
OS- Windows vista Business...
SQL- SQL Server 2000 client
I am able to connect from other local machines which is having windows 2000 as OS.
Also I am able to register from the windows vista machine to another sql server which is having Windows 2000 OS. connection problem is only happening when I am trying to connect to Windows 2003 server.
Please help me as I am having urgency to resolve this.
Thanks in Advance
Sreejith
View 2 Replies
View Related
May 8, 2008
Hey guys,
A client is running an application called Console. They recently upgraded to Console 2007, which users SQL 2005. All clients on the network can connect to it fine, both XP and Vista.
We have now added another Laptop with Business Home to the network and the Console client cannot connect to the Server. I created a UDL connection for testing and found that from the drop down box under Server I can see all instances on all computers, but when a "Test Connection" is run, I get the following error:
"Test Connection failed becuase of an error initializing provider"[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied."
This happens on all databases on all servers regardless of credentials supplied. Run the same test from the server directly or another computer on the network, it works fine. This laptop is in the same groups as the other workstations, tried by allow 1433 and 1434 through firewall, tried disabling firewall (windows firewall) altogether. I have tried using DB credentials or AD based credentials that work fine from other PC's.
TCP IP has been enabled through cliconfg
Any ideas?
Cheers
View 6 Replies
View Related
Sep 27, 2007
Hi,
I'm having a BIG problem, this is my 3rd day looking for answer !I'm trying to create a custom membership provider with MS SQL database 2005 but not the default ASPNETDB. I've changed the web.config to be as following:<connectionStrings><add name="sqlConn" connectionString="Data Source=.;Integrated Security=True;Initial Catalog=ASPNETDB;"providerName="System.Data.SqlClient" /></connectionStrings> <system.web><trace enabled="true" /><roleManager enabled="true" /><authentication mode="Forms" />
<membership defaultProvider="MySqlProvider"><providers><remove name="AspNetSqlProvider"/><add name="MySqlProvider" connectionStringName="SqlConn" type="System.Web.Security.SqlMembershipProvider" applicationName="/" /></providers></membership>
But when I try to login to the site using the login control the following error occurs:
Server Error in '/etest' Application.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: The connection name 'LocalSqlServer' was not found in the applications configuration or the connection string is empty.Source Error:
Line 149: <roleManager>
Line 150: <providers>
Line 151: <add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 152: <add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 153: </providers>Source File: C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config Line: 151
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.213
It is clear that this is a prblem with my Machine.Config file - since I've "worked!" on this file for a while. But when I've checked the Machine.config file I've found the LocalSqlServer connection it is talking about! .
I'm lost and I dunno what to do, can anyone help?
Here is the mahine.config in case if you need it:<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /></connectionStrings>
<system.data><DbProviderFactories>
<add name="Odbc Data Provider" invariant="System.Data.Odbc" description=".Net Framework Data Provider for Odbc" type="System.Data.Odbc.OdbcFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="OleDb Data Provider" invariant="System.Data.OleDb" description=".Net Framework Data Provider for OleDb" type="System.Data.OleDb.OleDbFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="OracleClient Data Provider" invariant="System.Data.OracleClient" description=".Net Framework Data Provider for Oracle" type="System.Data.OracleClient.OracleClientFactory, System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="SqlClient Data Provider" invariant="System.Data.SqlClient" description=".Net Framework Data Provider for SqlServer" type="System.Data.SqlClient.SqlClientFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="SQL Server CE Data Provider" invariant="Microsoft.SqlServerCe.Client" description=".NET Framework Data Provider for Microsoft SQL Server 2005 Mobile Edition" type="Microsoft.SqlServerCe.Client.SqlCeClientFactory, Microsoft.SqlServerCe.Client, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" /></DbProviderFactories>
</system.data><system.web>
<processModel autoConfig="true" /><httpHandlers />
<membership><providers>
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" /></providers>
</membership><profile>
<providers><add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers></profile>
<roleManager><providers>
<add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /><add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers></roleManager>
</system.web>
View 8 Replies
View Related
Sep 16, 2015
I am using sqljdbc41.jar to connect with MSSQL database, it is working fine on my local machine.Where as on the remote server, same class giving me error
Login failed for user '<domain><windows loginID>'
My connection string is URL...
I am using sqljdbc41.jar and on 64 bit processor , I am using following command which included path for sqljdbc_auth.dll java -Djava.library.path= C: sqljdbc_4.1enuauthx64 TestDao and error is Login failed for user '<domain><windows loginID>' why it is not picking up username passed in connection string. I have 2 machines, one is local and other is remote. on both machine I login using my domain, it is working absolutely fine on local then why the error is coming on remote machine.Both the machines are identical.
View 4 Replies
View Related
Jan 18, 2008
I have been trying to host my website on Go Daddy for about 3 weeks and I have cleared several problems but this one remains. I can get into the ASPNETDB database for doing logins , etc but I cant access my database called "PINEmgt".
To try to understand where the problem is located,I built a very simple application without login controls and put on it one Detailform accessing a single line table "Signin". I continually get the error message I got with my real app :"The connection name 'PINEMgtConnectionString2' was not found in the applications configuration or the connection string is empty. " There is only one connection string in my app -'PINEMgtConnectionString2'. When I run the app locally on my machine it works. After I move everything to Go Daddy, I get the error message and the following dump"
Line 24: </Fields>
Line 25: </aspetailsView>
Line 26: <aspqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStringsINEMgtConnectionString2 %>"
Line 27: InsertCommand="INSERT INTO Signup(first_name, last_name, email, customer_id) VALUES (,,,)"
Line 28: SelectCommand="SELECT * FROM [Signup]"></aspqlDataSource>
This is indeed the code from my single page app.
The dump is:
[InvalidOperationException: The connection name 'PINEMgtConnectionString2' was not found in the applications configuration or the connection string is empty.]
System.Web.Compilation.ConnectionStringsExpressionBuilder.GetConnectionString(String connectionStringName) +3039085
ASP.default_aspx.__BuildControlSqlDataSource1() in d:hostinguck7scoutDefault.aspx:26
ASP.default_aspx.__BuildControlform1() in d:hostinguck7scoutDefault.aspx:10
ASP.default_aspx.__BuildControlTree(default_aspx __ctrl) in d:hostinguck7scoutDefault.aspx:1
ASP.default_aspx.FrameworkInitialize() in d:hostinguck7scoutDefault.aspx.vb:912306
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +40
System.Web.UI.Page.ProcessRequest() +86
System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +18
System.Web.UI.Page.ProcessRequest(HttpContext context) +49
ASP.default_aspx.ProcessRequest(HttpContext context) +29
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
After Googleing, asking Go Daddy for info (which they dont give) , etc for three weeks, I need serious mental help
in the form of a solution of this problem. Your help with the problem or the name of a good mental health professional in eastern N.C. (maybe both) would be appreciated.
View 10 Replies
View Related
May 30, 2008
I have seen another thread with this same problem, but the problem seemed to be a typo. I am getting an error when I try to access the web site ..
The connection name 'USASH-AS0013' was not found in the applications configuration or the connection string is empty.
However, in my web.config file I do have a connection named USASH-AS0013. Here is my web.config file (with my user/pwd hidden). Any help would be greatly appreciated.
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
WindowsMicrosoft.NetFrameworkv2.xConfig
-->
<configuration>
<appSettings/>
<connectionStrings>
<add name="USASH-AS0013" connectionString="Provider=SQLOLEDB;Data Source=USASH-AS0013;User ID=****;Password=*****;Initial Catalog="Smart Factory""
providerName="System.Data.OleDb" />
</connectionStrings>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.
-->
<compilation debug="true" strict="false" explicit="true"/>
<pages theme="MySkin" >
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
</namespaces>
</pages>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Windows"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
</system.web>
</configuration>
View 3 Replies
View Related
Jun 6, 2007
Hi,
I have ASP.NET application which connectts to SQL Server 2005 on a server remotely. Everything was working fine untill I installed Vista on my laptop and ran the ASP.NET application. It throws following exception very often :
"System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)"
This seems to be Vista specific problem because evrything works fine on XP machine.
Thanks
Mohit
View 3 Replies
View Related
Feb 25, 2006
Hey,
After install Visual Studio 2005 (with SQL sever express) on recent Vista build, trying to connect to a local sse database file from Data Source Window (accessible from Data/Show data source window) gives this error:
---------------------------
Microsoft Visual Studio
---------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
---------------------------
OK
No issues if we install Visual Studio 2005 on WinXP or W2k3.
Is there any configuration we need to set on vista to allow sql connection?
Thanks,
Mei
---------------------------
View 4 Replies
View Related
Nov 16, 2007
I have a client/server app with a connection string:
Provier=SQLNCLI;Server=ServerIP;Database=DBName;UID=Name;PWD=Password
This connection string works for Vista 64bit but not for Vista Business 32bit...
What have I done so far to the Vista Business 32bit...
1. Downloaded/Installed SQLNCLI from Microsoft Site
2. Tested the connection string several ways with no luck...
3. Was able to get Vista Business 32bit to connect via a File DSN with the same credentials... DSN route is not an option for this app...
Any ideas?
View 1 Replies
View Related
Feb 19, 2015
I have a child package where the ConnectionString property of a Connection Manager is set by a Parent Package Variable Configuration. I set up a script task that brings up a message box with the value of the ConnectionString property right before the dataflow task.
MessageBox.Show(Dts.Connections["CPU_*"].ConnectionString.ToString());When I run the parent package, the message box shows that the connection string is changing with every iteration, but in the dataflow it always draws the data from the same source.
The connection manager is an ADO.Net type, RetainSameConnection is set to False, and I've been researching this for days.
(Update 2/23/2015): To make this stranger, when I look at the diagnostic logs, they tell me that when the new connections are being opened they are using the new connection strings.
View 2 Replies
View Related
Jan 4, 2006
I came across something strange today. I was wondering I was doing something wrong.
View 7 Replies
View Related
Jul 3, 2007
This is the first time I have used SSIS, so please bear with the ignorance.
I have a super simple package that inserts x000's of rows into a temporary table. The data source is a file that the user will upload. I need to be able to tell the package what file to upload. I'm thinking the simplest thing would be to edit the connectionString property of the SourceConnectionFlatFile at runtime. Is this possible? What form should the file path be in (UNC, other)? And, are there any other considerations I should be aware of?
Thanks!
View 1 Replies
View Related
Feb 15, 2008
Hello,
I'm trying to add a new connection in server explorer. The server will not appear
in the server drop down list, and when i manually type in the server and database name,
the connection fails saying
"An error has occured while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact
that under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - could not open a connection
to SQL Server)"
I made sure the remote connections were on, and I am having no problems open
the sql connection in code.
Thanks in advance,
Sharp_At_C
View 1 Replies
View Related