Schedule A SSIS Package Which Execute DTS 2000 Package
Mar 25, 2008
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
I have a "Execute DTS Package 2000 " task in SSIS. The SQL 2000 DTS has one task which precedence is "completion". Using SQL2000 it works properly, but when I invoke it from SSIS it doesn€™t respect the precedence. So, when the task above fails it ends the DTS execution.
Is it possible to configure the task to respect the precedences?
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
I have created a package that is using Execute process Task through which I am executing a C# console application exe. When I run this package through BI then it runs fine and it does not give any error but when I try to schedule this package as job then it gives error and that error is not clear.
Is it required to place the exe also on same server as SQL server. I put that also on machine where SQL server is present but still it gives error.
I searched a lot of articles about how to schedule SSIS package and do exactly the steps they told me to do. But it still failed.
Date 3/20/2008 1:18:01 PM Log Job History (my job name) Step ID 0 Server MPG_XXXXX Job Name my job name Step Name (Job outcome) Duration 00:00:01 Sql Severity 0 Sql Message ID 0 Operator Emailed Operator Net sent Operator Paged Retries Attempted 0 Message The job failed. The Job was invoked by User lyang. The last step to run was step 1 (run SSIS).
ate 3/20/2008 1:18:01 PM Log Job History (my job name) Step ID 1 Server MPG_ULTIMATE Job Name my job name Step Name run SSIS Duration 00:00:01 Sql Severity 0 Sql Message ID 0 Operator Emailed Operator Net sent Operator Paged Retries Attempted 0 Message Executed as user: domainlyang. The package execution failed. The step failed.
Please help me! I have worked on it for many hours.
I have some SSIS pacakages that I want the user to be able to schedule dynamically from the UI. I know there are some stored procedures provided by Microsoft for this, but am not able to figure out how to go about it. Thanks.
I have a SSIS package which execute a SQL 2000 server DTS package. When run this package alone, there is no problem. But when schedule the job, it failed.
C:>dtexec /file "C:Documents and SettingslyangMy DocumentsVisual Studio 200 5ProjectsTraingDTSTraingDTSDTSTraining.dtsx" Microsoft (R) SQL Server Execute Package Utility Version 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:19:40 AM Progress: 2008-04-18 08:19:40.49 Source: Execute DTS 2000 Package Task Execute DTS 2000 Package Task is initiated: 0% complete End Progress Error: 2008-04-18 08:20:41.68 Code: 0x00000000 Source: Execute DTS 2000 Package Task Description: System.Runtime.InteropServices.COMException (0x80040427): Execut ion was canceled by user. at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteT hread() End Error Progress: 2008-04-18 08:20:41.68 Source: Execute DTS 2000 Package Task Execute DTS 2000 Package Task is completed: 100% complete End Progress Warning: 2008-04-18 08:20:41.68 Code: 0x80019002 Source: DTSTraining Description: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the M aximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 8:19:40 AM Finished: 8:20:41 AM Elapsed: 61.375 seconds
When I run manualy, it works without error but when I schedule it, the step fail with error: "Executed as user:... The package execution failed. The step failed."
This package contain just a SQL Task that execute a truncate table (it's for the test...)
I try all solution I found in this forum and others but all not works.
I have a SSIS package (say A). Is there any way i can schedule the package such that to check if a particular sql server agent Job (say B) is running (which runs every 1 minutes) and the package to execute only if that sql server agent job (B)is not running. The package will fail if Job B is running and Job B is scheduled to run every one minute based on a condition ,so it does not occur at uniform intervals. Should i have to use some script for this or is there any Task which can check whether the other job is executing or not.
We just did an in-place upgrade from sql2000EE to sql2005EE and I installed the SQL Server 2000 DTS Designer componets but I don't see the option to schedule a package.
Can i schedule a SSIS package by not using SQL AGENT? Do we have any other options to schedule teh package? I have worked on other etl tools which have inbuilt options.
We have some SSIS packages that are running on a recurring SQL Job. They work and play fine. They ran for about three iterations and then decided to stop....they don't report errors, they just don't do anything. They sit as if they were disabled (but they aren't disabled, I checked the MSDB database).
You can manually execute the packages and they work fine.
I have dumped and reloaded these packages and that hasn't fixed the issue.
If I setup a simple recuring job that executes a sql script every few minutes that works fine and you can see that it executes every few minutes. But these SSIS packages just sit....and do nothing. But they were working for the first few iterations.
I have also redeployed the SSIS packages and that hasn't fixed it either.
I have created an SSIS package which will import data from EXCEL file to SQL server. I had assigned the excel file path using an expression which wil be a combination of the folder path where the excel file resides + file name + date+extension. I also assigned the connection string for the OLEDB using the Expression. I have also exported the Folder path and the eonnection string variables to the package configurations and i have created the deployment project, which contains the package, packagemanifest and the package config file.
Now i need to know the steps to install the package in the production server and the steps to schedule the job in the sql server.
any of you plz give me the link to find the steps or plz tel me the things that i have to do.
I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.
Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).
The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.
Is there a way to control SSIS 2014 package execution schedule. I have 8 different packages that I have to schedule for this project and these packages need to be executed only when the data is available on the source for the package to grab. So the idea we are banking on is to create a Control table with package execution flag and when the flag is set to yes for a package that will be executed via SQL Server agent. How would I accomplish this?
Hi, Using SSIS, how is it possible to execute another ssis package and pass a parameter to it? For example, I would like to have a sql code that runs the package say "d:sysapplCEMSSISCSA.dtsx" and pass a parameter of fileName because the CSA.dtsx package requires a filename.
I wrote this post in another category but the answer did not satisfied so that I'd like to know if really anyone has ever used or experienced with this possibility. No by .Net language rather than Vb 6.0 or ASP or even instanciacing DMO library.
I have created four package, it should executed sequencely one by one. Is it there any option like sequencer in Data Stage for achive this requirement? I want to execute these package one by one using SSIS. could you help on this requirement?
I've an application developed in VB 6.0. Now I had created a SSIS package which is used to import data from an Excel file. This package has a variable "App ID".
Now I need to execute the package from VB application. Also I need to pass the value for the variable "App ID".
A developer needs to execute an SSIS package from a stored procedure and I do not want to enable xp_cmdshell on SQL 2005.
One suggestion is to have the application invoke dtexec on the client PC, but this would cause the package to be executed on the client and also requires some SSIS components be installed on each client.
Another idea is to configure a Windows Service to execute dtexec, but I do not know the risks of this approach. Any thoughts?
