Hi,
I have a table with 1.6 million records with a foreign key called "ums_id" (int). I would like to select the ums_id's in groups of 5000. is there a simpler way to break these id's up instead of
select count(*)
from newsletter_opt_in
where ums_id between 493525 and 510075
and opt_in_Id = 1 and opt_in_status = 'Y'
I would like to break up the whole 1.5 million in one sql statement if I can.
Thanks, Mark
I have a Attendance table named say Attendance which has Class and Status along with some other fields.Class will have the name of the class the student is in,whereas the status will have the Absent/Present data.There is another table named say ClassMaster which is the master which will have all the classnames and there is a column of ClassTeacher which will have the EmployeeCode.This employeeCode comes from a table EmployeeMaster.My requirement is i want to get the count of Absent students in Attendance table depending on the Class.For Example if there are two class say ClassA and ClassB,then i should get the count of the Students from Attendance table that belong to Class A and Class B.How cn i do this in one Query.
View 1 Replies View RelatedSteve writes "I need a query to show all the medicare patients only. I want only one kind of insurance for each patient. I am getting records where each patient has more than one insurance like medicare and something else.
Each patient has one,two, three or more insurances like
medicare,medical,blue cross,tricare etc.
The result should look like this:
Sam pick Medicare
John white Medicare
Ann Richmond Medicare
My query retrieves patients with more than one insurance.
select patient_first_name f_name,patient_last_name l_name,patient_zip zip,
count(distinct payer_id) payer_id
from claims
where payer_id ='abcdefhj'
group by patient_first_name, patient_last_name,patient_zip
having count(distinct payer_id)= 1
order by patient_zip asc;
please help me. Greatly appreciate your response."
I'm trying to do the following and haven't been able to figure it out.
Say there's a table with these records:
Col1 Col2 Col3
a b c
a b c
a b d
e f g
e f g
I want to generate a number that represents the groups of columns like this:
Col1 Col2 Col3 MyNumber
a b c 1
a b c 1
a b d 2
e f g 3
e f g 3
So that each grouping gets its own identifier. I've tried this:
SELECT Col1, Col2, Col3
row_number() OVER (PARTITION BY Col1, Col2, Col3
ORDER BY Col1, Col2, Col3) AS MyNumber
FROM MyTable
But I get this:
Col1 Col2 Col3 MyNumber
a b c 1
a b c 2
a b d 1
e f g 1
e f g 2
I have a CTE returning a recordset which contains a column SRC. SRC is a number which I use later to get counts and sums for the records in a distinct list.
declare@startdate date = '2014-04-01'
declare@enddate date = '2014-05-01'
; with SM as
(
SELECT --ROW_NUMBER() OVER (PARTITION BY u.SRC ORDER BY u.SRC) As Row,
u.SRC,
[Code] ....
-- If Referral start date is between our requested dates
ref.Referral_Start_Date between @startdate and @enddate
OR
-- Include referrals which started before our requested date, but are still active during our date range.
(ref.Referral_Start_Date < @startdate and (ref.Referral_End_Date > @startdate OR ref.Referral_End_Date IS NULL ))
)
INNER JOIN c_sdt s on s.Service_Delivery_Type_Id = u.Service_Delivery_Type_Id
AND s.Service_Delivery_Unit_Id = 200
)
SELECT
count(distinct (case SRC when 91 then client_number else 0 end)) As Eligable_91,
[code]....
I am in middle of my transformation where I have to assign records equally among 3 different groups. I can do that in SQL using NTILE() Over() function. How do I do that in SSIS package. I have applied different business rules during transformation to get unique records and now I have to assign those records to 3 group in and generate excel report.Basically, I will need to have another column which will have those group numbers.
View 6 Replies View RelatedI have a new SQL 2005 (SP2) Reporting Services server to which I've just upgraded and deployed some SSRS 2000 reports.
I have a subreport that contains a matrix with two groups. The report data seems to be inexplicably repeating the data for the first row in the group for all rows in the group. Example:
ID1
ID2
DisplayData
1
1
A
1
2
B
1
3
C
2
1
A
2
2
B
2
3
C
Parent group is on ID1, child group is on ID2, report would show:
1
1
A
2
A
3
A
2
1
A
2
A
3
A
Is this a matrix bug in 2005 SP2, or do I need to do something differently? I can no longer pull a comparison version from an SSRS 2000 server to verify, but I believe it was working as expected before...
My bos wants me to create 5000 database on single sql server box. I was stuned by his stupility but could not stop it. What kind of box could hold these databases ? Each DB is about 6.5 MB starup with 4 MB for 6 months. Each DB will have 10 users. They might hit at same time. What kind of configurations for the server box ? What kind of maintainence nightmare ? How about recovry ? and so on. Any one got idea ? or any more question you would ask if you were me ? Thanks
View 9 Replies View RelatedHi,
We are performing a SQL 2000 to SQL 2005 upgrade on a Windows 2003 SP1 server.
We encountered error in the SQL 2005 upgrade with the following error :
===================================
Common Language Runtime detected an invalid program.
===================================
Common Language Runtime detected an invalid program. (System.Xml)
------------------------------
Program Location:
at System.Xml.Schema.SchemaInfo..ctor()
at System.Xml.Schema.XmlSchemaSet..ctor(XmlNameTable nameTable)
at System.Xml.XmlReaderSettings.get_Schemas()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReportController.LoadAndValidateDataFile()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReport.ValidateDataFile()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAIssueReport.Refresh()
at Microsoft.SqlServer.UpgradeAdvisor.ReportPanel.OpenReport(String reportFile)
From the Event Viewer, under Application, we can see the following error :
EventID : 5000
Source :
EventType clr20r3, P1 bpacmd.exe, P2 2005.90.2047.0, P3 443f5935, P4 bpacmdx, P5 9.0.242.0, P6 443f5932, P7 7, P8 7a, P9 microsoft.bpa.common.bpaserver, P10 NIL.
We do urgently need some help now.
Thanks.
I'm trying to build a association model in the Standard Edition based on an existing cube. I keep getting the error:
Error (Data mining): The 'Product Recommendations' mining model has 60385 attributes. This number of attributes exceeds the attribute limit of 5000 allowed by the current version of the algorithm associated with the mining model.
I created Cube Slice filters and those limit the Customer and Product dimensions (Product is Nested) to well under 5000. The error message also does not change. The number of attributes is equal to the number of rows in the Product dimension, but I expected the cube slice to reduce the number. I tested all the SQL used while it processes and with the MDXFilters the number of rows returned is well under 5000.
So, in short, the final questions is, is it possible to create a mining model in standard edition based on an existing cube where the nested dimension in the model has more than 5000 rows? Is there some other way to filter the query?
I guess my only choice on this if there isn't a way is to extract the data into relational table with only the rows I want to analyze....that's a huge pain and doesn't really make sense when the filters should limit the model size.
What is annoying on this is I can't find one reference anywhere on the microsoft site that this limit even exists within the product...
Thanks for any assistance on this!
Hi, I want to delete from table when the record count is over 5000. That is, the table's record cannot over 5000 count. How? row_number() seem to be used...
View 11 Replies View RelatedI can't paste text (directly into table row via enterprise manager) into a varchar (5000) field, truncates after about 960 char. Length of string trying to paste is about 1400 characters including spaces. No special characters (one apostrophe). Error happens intermittently.
SQL server v2000
I only found http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=389835&SiteID=17 regarding this error message and it was of no help to me.
Background: 3rd party program that extracts users from a AD group and manage user creation i a MSSQL 2000 server. Also sends e-mails using the SMTP service. The funny thing is that the program manages everything correctly, but writes an error in the Event log as it exists (below). Job is scheduled with the SQL server agent and runs with a doamin user that has local admin rights. We have the same setup on a testserver where it runs without problems.
Windows server 2003, MDAC 2.8, SQL Server 2000 SP3, .NET framework 2 on both servers.
Event Type: Error
Event Source: .NET Runtime 2.0 Error Reporting
Event Category: None
Event ID: 5000
Date: 2006-08-29
Time: 09:16:28
User: N/A
Computer: STHPS0125
Description:
EventType clr20r3, P1 bzadbatch.exe, P2 1.0.0.0, P3 44e5c349, P4 bzadbatch, P5 1.0.0.0, P6 44e5c349, P7 25, P8 308, P9 system.nullreferenceexception, P10 NIL.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 63 00 6c 00 72 00 32 00 c.l.r.2.
0008: 30 00 72 00 33 00 2c 00 0.r.3.,.
0010: 20 00 62 00 7a 00 61 00 .b.z.a.
0018: 64 00 62 00 61 00 74 00 d.b.a.t.
0020: 63 00 68 00 2e 00 65 00 c.h...e.
0028: 78 00 65 00 2c 00 20 00 x.e.,. .
0030: 31 00 2e 00 30 00 2e 00 1...0...
0038: 30 00 2e 00 30 00 2c 00 0...0.,.
0040: 20 00 34 00 34 00 65 00 .4.4.e.
0048: 35 00 63 00 33 00 34 00 5.c.3.4.
0050: 39 00 2c 00 20 00 62 00 9.,. .b.
0058: 7a 00 61 00 64 00 62 00 z.a.d.b.
0060: 61 00 74 00 63 00 68 00 a.t.c.h.
0068: 2c 00 20 00 31 00 2e 00 ,. .1...
0070: 30 00 2e 00 30 00 2e 00 0...0...
0078: 30 00 2c 00 20 00 34 00 0.,. .4.
0080: 34 00 65 00 35 00 63 00 4.e.5.c.
0088: 33 00 34 00 39 00 2c 00 3.4.9.,.
0090: 20 00 32 00 35 00 2c 00 .2.5.,.
0098: 20 00 33 00 30 00 38 00 .3.0.8.
00a0: 2c 00 20 00 73 00 79 00 ,. .s.y.
00a8: 73 00 74 00 65 00 6d 00 s.t.e.m.
00b0: 2e 00 6e 00 75 00 6c 00 ..n.u.l.
00b8: 6c 00 72 00 65 00 66 00 l.r.e.f.
00c0: 65 00 72 00 65 00 6e 00 e.r.e.n.
00c8: 63 00 65 00 65 00 78 00 c.e.e.x.
00d0: 63 00 65 00 70 00 74 00 c.e.p.t.
00d8: 69 00 6f 00 6e 00 20 00 i.o.n. .
00e0: 4e 00 49 00 4c 00 0d 00 N.I.L...
00e8: 0a 00 ..
I'm not a developer, so I'm pretty lost why it behaves like this on one server and not the other. Checked Aspnet.config-file and they are the same. Found this
http://support.microsoft.com/?id=911816
that described that the exception handling was different between the .NET-versions, but since this works on one of the servers, it shouldn't be related, or could it? Tried changing the setting in method 2, but with the same behaviour. Any ideas?
Best regards
/ Jan
I have a [User] table with a field called Username and a field called AssignProject. The values in the AssignProject field look like this: 9900|5057|5002|5000|90010|5086|5003|5097|5038|5059|5043|5099|5096|90000|5084|9991|4180|5047|6064|9999|4160|5104|5110|5107|5109|5115|
Those values are foreign keys for values in another table called Project, where the primary key is ProjectID and the other field is ProjectName.
I am trying to write a report in a T-SQL query to tell me which projects are assigned to each user, but the query is not a typical join since the ids are in a string separated by the | character.
Any help will be appreciated.
Thanks.
I've got an INSERT that's selecting data from a linked server and attempting to push 10 million rows into the blank table. More or less, it looks like this:
insert into ReceivingTable (
Field1, Field2, Field3, Field4
, Field5, Field6, Field7, Field8
, Field9, Field10, Field11, Field12
, Field13, Field14, Field15
[code]...
The instance of the SQL Server Database Engine cannot obtain a LOCK resource at this time. Rerun your statement when there are fewer active users. Ask the database administrator to check the lock and memory configuration for this instance, or to check for long-running transactions. There are no other active users. I ran it again and monitored the following DMO to watch the growth of locks for that spid:
SELECT request_session_id, COUNT (*) num_locks
-- select *
FROM sys.dm_tran_locks
--where request_session_id = 77
GROUP BY request_session_id
ORDER BY count (*) DESC
The number of locks started small and held for a while around 4-7 locks, but at about 5 minutes in the number of locks held by that spid grew dramatically to more than 8 million before finally erroring again with the same message. Researching, I can't figure out why it's not escalating from row locks to table locks at the appropriate threshold. The threshold in was set to 0 at first (Server Properties > Advanced > Parallelism > Locks). I set it to 5000, and it still didn't seem to work. Rewriting the INSERT to include a WITH (TABLOCK) allows it to finish successfully in testing. My problem is that it's coming out of an ETL with source code that I can't edit. I need to figure out how to force it to escalate to locking the entire table via table or server level settings.
A colleague suggested that installing service packs may take care of it (the client is running SQL Server 2008 R2 (RTM)), but I haven't found anything online to support that theory.
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
I expect to get a record below with a count of 0 (and I do), but when I take the comments out (--) of lines 1 & 6 I don't understand why I get no records at all. I need to be able to see all teams in EvalAnswers even if none of the records satisfies the where clause.1 select Count(*) as cnt--, TeamID
2 from EvalAnswers
3 where CoID=@CoID
4 and EvaluatorID=@EvaluatorID
5 and (Scr0=0 and Sugg0 is NULL)
6 --group by TeamID
7
Hi,
I would like to create groups in SQLServer2000.Do i need to do this by roles or can i create groups for each database.I read some where that there where
no groups for SQLServer7.0. Is this option available for the latest versions.
Any help will be appreciated.
Thanks in Advance.
Ran.
If you have a SAN, is there any real benefit to breaking out large tables into file groups?
View 1 Replies View RelatedI am looking to find out when to use file groups when backing up. When should you use this, what's the benefit over just doing a full db backup? Is it better when you are dealing with large db's?
Also this question has been on my mind for a while. Why shouldn't you shrink the db after every full backup? What is the negative in doing so?
Thanks
I realize the irony of asking this here, but does anyone know of any MySQLgroups where I can ask my questions?Thanks.
View 1 Replies View Related
In my report I have 3 row groups and two column groups as follows, where measure is number of hours for a given project.
2008/05 2008/06 ........
Demand | Allocated Demand | Allocated
- Project 1 1500 1000
- Department1 500 400
- Employee1 200
- Employee2 200
- Department2 1000 600
- Employee3 300
- Employee4 300
+ Project 2 1200 1000
-------------------------------------------------------------------------------------------------------------------------
Grand Total 2700 2000
My question is, is this possible using a Matrix? I have used matrix in some of my reports but have always used automatic/generic SUM feature it provides.
Note carefully that there are no values for Employees in Demand Column Group. Basically I would have to SUM Department groupings to get the Project level total and then SUM all Project Groupings to get the grand total. The Allocation column is okay since the Employees have values in that column. Can this be done using InScope( ) or some other function rather than simply doing the Generic SUM of Rows and Columns of the matrix which would probably throw error when trying to sum a blank value in demand column.
Thanks in advance.
How do I put information only at the top of a page and have it change whenever a group occurs.
I want to do something like this. Have this on the top of every page:
Country: current country
State: current state
City: current city
There is a group on country, state and city. Whenever city changes the next page will display a new city. Whenever state changes the next page will display the new state in the header.
I have already put Country, State, and City into their own group headers. However, if either of them change in the middle of the page then the group header repeats. I have group header repeat on so I can see it on each page. If I choose the Page break at start then it breaks but I don't want it to break. I want it to run on the same page if it passes a group and then have the next page display relevant information for the group.
Putting it in the table header works as far as keeping them all on the top of the page but it doesn't change when a grouping ends.
Please assist me in anyway you can.
Thanks,
Sarah
I have my first SSRS report going, after years on Crystal and Access. It has several groups, each nested within the next...I think. I'm having a little trouble with the groups...well, grouping the way I thought I had it set up. The groups come out looking like my primary group is second instead of first, although when I look at the groups in "edit groups" it appears I have them set up correctly.
In Crystal, on the preview page you could see the groups idendified so if there was a problem in a report you could tell what group it was coming from. You could also select and change objects in preview, which made it nice to see the impact of changes. I cannot see either of these features in SSRS. I'm hoping that there's a setting I need to turn on, and also hoping that this product has these user friendly features. Any ideas on that?
Also, in Crystal, when you set up a group or a formula, it became available in the field list within the formula builder, so you could use them by picking them instead of typing the whole thing in again, and that's not available either. Or I can't find it!
Since I'm new to SSRS maybe there are features and settings I haven't found yet, but would appreciate any comments from more experienced users about the overall usability of this tool.
Thanks!
Is there any way to keep a table group together. MSFT says no but I can't believe this limitation exists. It's a basic reporting function in any reporting software I've used.
I have one group in a table. I don't want the detail rows to be split when it gets to the bottom of the page.
Server:
Sql 2005 SP2 running on Win2003 Ent. SP1
I have a 3rd party app that needs me to add a user to the SQLServer2005SQLAgentUser group for the instance I placed the DB in. This group doesn't exist on my server for any of my instances. Is there a simple way to generate it or a document that can tell me how to manually create it?
Hi everyone,
When I do the following, did I put the files in Test1FG1 file group to the default file group(Primary) ?
ALTER DATABASE Test1
MODIFY FILEGROUP Test1FG1 DEFAULT
GO
Thanks
I'm wondering if there is any way in RS to create what Crystal reports calls Custom or Named Groups. This functionality allows you to define groups based on the values found in one of the fields on your report. For example, if I were grouping on a person's last name and I want 3 groups based on the first letter: A-G, H-P, Q-Z. I would want to keep it contained in one table.
View 6 Replies View RelatedHi All,
I have a challenging report to create. I need to create a report where I'll have groups then I need to have a ceiling on the group to print only 10 records (if there are more than 10 records) then go to the next page and print the final records for that group. I can do the grouping and I can do the ceiling, but I am having a hard time doing both. I'm open for any suggestions.
Thanks
Hi everyone,
While creating our database in only one disc(C or D), suppose that we create more than one file group in order to group our data files. However, in this situation; I wonder that whether it brings any benefit or advantage to us.
Also, I wonder that why we always have to put our data file into separate file group if we use separate discs for data files. Is not it allowed to use only one file group even if we use separate dics ?
Would you explain these to me ?
Thanks
Hello,
in a report in Reporting Services 2005 I want to create a top count 100 for groups.
I have a report sheet with a table containing some groups.
Under the groupings there are other groupings and so on.
Now I want that only the top 100, ordered by a value on group level of the 1st group are contained in the report.
Any ideas?
Best regards,
Stefoon
Is it possible that i can create a SQL Server Group in sql 2005. Eg. in 2K when u right click (in Enterprise manager) on Microsoft Sql servers you can see "New Sql server Group". I am talking about this group. I have many servers in NYC and Dallas and in VA. I want to group them in the group names NYC DAL VA. is it possible.
View 12 Replies View RelatedI am thinking of updating my SQL monitoring application to use Service Broker.
Right now I loop through my list of servers performing various checks on each server. Things like 'check last database backup', 'check for new databases', 'check for server restart'. I loop through, one server at a time, doing one check at a time. The more servers I have the longer it is taking.
So, I want to multi-thread the servers, but single-thread the checks on each individual server. This way I can check say, 5 servers at a time, but on each server I will only do one check at a time. This way I won't flood an individual server with multiple checks.
Is this possible? It looks like Conversation groups might be the way to go but I'm not sure.