I need to access a table and return 3 values from it in the same
recordset - ie one iteration of the recordset will have 3 values from
the same database, I have looked at sub queries but they dont seem to
be able to do what i want.
I would be grateful for any guidance
S
I have a stored procedure that selects the unique Name of an item from one table.
SELECT DISTINCT ChainName from Chains
For each ChainName, there exists 0 or more StoreNames in the Stores. I want to return the result of this select as the second field in each row of the result set.
SELECT DISTINCT StoreName FROM Stores WHERE Stores.ChainName = ChainName
Each row of the result set returned by the stored procedure would contain:
ChainName, Array of StoreNames (or comma separated strings or whatever)
How can I code a stored procedure to do this?
I am new to SQL and I am trouble-shooting a problem with a home-grown app someone else wrote using PERL. It has a web interface with names of boards. I found the program where i need to add the board names into and did that. The new board names show up in the drop-down list in the Web page for the app. Alerts are sent to the new board names and show up on the new boards. Users are granted access to the new boards and they can clear items off the new boards. Yet when i try to use a report function for the new boards i added, nothing is returned. I even ran a simple SQl select statement specifying the new board names and nothing is returned. The older board names, some of which i added myself, return values. I don't know what is going on. Any help is appreciated.
View 3 Replies View RelatedHello all,
I have been working with a DetailsView control for the past week and it is a great control, but also lacks on some departments. Anyhow I need to know what the best approach for this scenerio would be?
I have a SqlDataSource"
<asp:SqlDataSource ID="SqlUpsertAffiliateDetails" runat="server" ConnectionString="<%$ ConnectionStrings:connectionstring %>"
SelectCommand="SELECT am.affiliate_id AS AffiliateId, am.member_id AS MemberId, m.First_Name, m.Last_Name, am.category_id AS CategoryId, ac.category_name, am.profile_web_address AS WebAddress, am.profile_email_1 AS Email, am.comments AS Comments, am.date_modified FROM tAffiliateMaster AS am WITH (NOLOCK) INNER JOIN tAffiliateCategories AS ac WITH (NOLOCK) ON am.category_id = ac.category_id INNER JOIN rapdata..Member AS m WITH (NOLOCK) ON am.member_id = m.Member_Number WHERE (am.affiliate_id = @AffiliateId)"
UpdateCommand="spUpsertAffiliateProfile" UpdateCommandType="StoredProcedure">
<SelectParameters>
<asp:QueryStringParameter Name="AffiliateId" QueryStringField="affiliate_id" />
</SelectParameters>
<UpdateParameters>
<asp:Parameter Name="Action" Type="Byte" DefaultValue="2" />
</UpdateParameters>
</asp:SqlDataSource>
And my SP:/* 09-19-07 Used to update affiliate profile */
CREATE PROCEDURE spUpsertAffiliateProfile
@Action tinyint,
@AffiliateId int,
@MemberId int = -1,
@CategoryId int,
@WebAddress varchar(50),
@Email varchar(50),
@Comments varchar(1500)
AS
SET NOCOUNT ON
-- Find errors first, check is not needed if deleting
IF @Action <> 3
IF NOT EXISTS (SELECT Member_Number FROM rapdata..Member_Association WHERE Member_Number = @MemberId AND Status = 'A' AND Association_ID = 'TRI' AND Bill_Type_Code LIKE '%AF%')
BEGIN
SELECT retval = 'A qualified member ID was NOT found. Action Failed.', errorcount = 1, 0 AS affiliate_id
RETURN
END
IF @Action = 1
IF EXISTS (SELECT member_id FROM tAffiliateMaster WHERE member_id = @MemberId)
BEGIN
SELECT retval = 'This member has already been listed. Action Failed.', errorcount = 1, 0 AS affiliate_id
RETURN
END
IF @Action = 1 AND @AffiliateId = 0-- insert
BEGIN
INSERT INTO tAffiliateMaster
(member_id, category_id, profile_web_address, profile_email_1, comments)
VALUES
(@MemberId, @CategoryId, @WebAddress, @Email, @Comments)
SELECT retval = 'Record Entered', errorcount = 0, @@IDENTITY AS affiliate_id
RETURN
END
ELSE IF @Action = 2 AND @AffiliateId > 0-- update
BEGIN
UPDATE
tAffiliateMaster
SET
category_id= @CategoryId,
profile_web_address=@WebAddress,
profile_email_1=@Email,
comments=@Comments
WHERE
affiliate_id = @AffiliateId AND member_id = @MemberId
SELECT retval = 'Record Updated', errorcount = 0, @AffiliateId AS affiliate_id
RETURN
END
ELSE IF @Action = 3 AND @AffiliateId > 0-- delete
BEGIN
DELETE
tAffiliateMaster
WHERE
affiliate_id = @AffiliateId
SELECT retval = 'Record Deleted', errorcount = 0, 0 AS affiliate_id
RETURN
END
GO
My question is how will I be able to return the retval? Will I need to do it within the code behind of the SqlDataSource Updated Event?
Thanks!
Hey guys,
This is what I think and hope is a fairly straight forward SQL question
Essentially, I have a table which has the following columns that are relevent to my question:
PROJID
ACTIVITY_NAME
COMPLETION_DATE
Rows in this table are, for example:
PROJID ACTIVITY_NAME COMPLETION_DATE
1 Prepro 10/12/2007 3:42:30
2 Prepro 10/13/2007 9:16:27
2 QA 10/13/2007 10:00:01
2 Delivery 10/14/2007 09:31:12
etc.
So, really the key is the PROJID & the ACTIVITY_NAME (really, there's a unique column ID, but for this question, I'll leave it at that).
(Though this should be much easier to accomplish in code, the system is not built that way so) Is there a good way that I could return a status for a given PROJID based on whether a row exists for a given PROJID). In other words, ultimately, I would like to return something like this:
PROJID LAST_ACTIVITY
----------------------------------------------
1 Prepro
2 Delivery
where the activity order (in this case) is Prepro, QA, Delivery. So because a Delivery row exists for PROJID 2, then the LAST_ACTIVITY would return "Delivery" and because only Prepro exists for PROJID 1, the LAST_ACTIVITY returned would be Prepro
I really appreciate the help
Thanks,
Steve
If I try to run the code below, and even one of the values in the INNER
JOIN statements is NULL, the DataReader ends up with zero rows.
What I need is to see the results even if one or more of INNER JOIN
statements has a NULL value. For example, if I want info on
asset# 2104, and there's no value in the DriverID field, I need the
rest of the data to display and just have the lblDriverName by
blank. Is that possible?
<code>
Sub BindSearchGrid()
Dim searchUnitID As String
Dim searchQuery As String
searchUnitID = tbSearchUnitID.Text
lblIDNum.Text = searchUnitID
searchQuery = "SELECT * FROM Assets " & _
"INNER JOIN Condition ON Condition.ConditionID = Assets.ConditionID " & _
"INNER JOIN Drivers ON Drivers.DriverID = Assets.DriverID " & _
"INNER JOIN Departments ON Departments.DepartmentID = Assets.DepartmentID " & _
"INNER JOIN AssetCategories
ON AssetCategories.AssetCategoryID = Assets.AssetCategoryID " & _
"INNER JOIN Store ON
Store.[Store ID] = Assets.StoreID WHERE RTRIM(Assets.[Unit ID]) = '"
& searchUnitID & "'"
Dim myReader As SqlDataReader
myReader = Data.queryDB(searchQuery)
While myReader.Read
If
Not IsDBNull(myReader("Store Name")) Then lblStrID.Text =
myReader("Store Name")
If
Not IsDBNull(myReader("AssetCategory")) Then lblAsstCat.Text =
myReader("AssetCategory")
If
Not IsDBNull(myReader("Condition Description")) Then lblCondID.Text =
myReader("Condition Description")
If
Not IsDBNull(myReader("DepartmentName")) Then lblDepID.Text =
myReader("DepartmentName")
If
Not IsDBNull(myReader("Unit ID")) Then lblUnID.Text = myReader("Unit
ID")
If
Not IsDBNull(myReader("Year")) Then lblYr.Text = myReader("Year")
If
Not IsDBNull(myReader("Make")) Then lblMk.Text = myReader("Make")
If
Not IsDBNull(myReader("Model")) Then lblMod.Text = myReader("Model")
If
Not IsDBNull(myReader("Mileage")) Then lblMile.Text =
myReader("Mileage")
If
Not IsDBNull(myReader("Vin Number")) Then lblVinNum.Text =
myReader("Vin Number")
If
Not IsDBNull(myReader("License Number")) Then lblLicNum.Text =
myReader("License Number")
If
Not IsDBNull(myReader("Name")) Then lblDriverName.Text =
myReader("Name")
If
Not IsDBNull(myReader("DateAcquired")) Then lblDateAcq.Text =
myReader("DateAcquired")
If
Not IsDBNull(myReader("DateSold")) Then lblDtSld.Text =
myReader("DateSold")
If
Not IsDBNull(myReader("PurchasePrice")) Then lblPrPrice.Text =
myReader("PurchasePrice")
If
Not IsDBNull(myReader("NextSchedMaint")) Then lblNSM.Text =
myReader("NextSchedMaint")
If
Not IsDBNull(myReader("GVWR")) Then lblGrVWR.Text = myReader("GVWR")
If
Not IsDBNull(myReader("GVW")) Then lblGrVW.Text = myReader("GVW")
If
Not IsDBNull(myReader("Crane Capacity")) Then lblCrCap.Text =
myReader("Crane Capacity")
If
Not IsDBNull(myReader("Crane Certification")) Then lblCrCert.Text =
myReader("Crane Certification")
If
Not IsDBNull(myReader("Repair Cost")) Then lblRepCost.Text =
myReader("Repair Cost")
If
Not IsDBNull(myReader("Estimate Replacement")) Then lblEstRep.Text =
myReader("Estimate Replacement")
If
Not IsDBNull(myReader("SalvageValue")) Then lblSalVal.Text =
myReader("SalvageValue")
If
Not IsDBNull(myReader("CurrentValue")) Then lblCurVal.Text =
myReader("CurrentValue")
If
Not IsDBNull(myReader("Comments")) Then lblCom.Text =
myReader("Comments")
If
Not IsDBNull(myReader("Description")) Then lblDesc.Text =
myReader("Description")
End While
End Sub</code>
Hello everybody!
As the topic:
Can i get the value "count(*)" from EXEC('select count(*) from xTable')
Any helps will be usefull! Thanks!
This is a portion of my stored procedure in T-SQL
CREATE PROCEDURE GetPoll
(
@PollID INT,
@PollQuestion VARCHAR(1000) Output,
@PollOptions VARCHAR(1000) Output,
@PollPercentages DECIMAL Output
)
AS
SELECT @PollQuestion = (SELECT PollQuestion FROM Polls WHERE PollID = @PollID)
SELECT @PollOptions = (SELECT [Option] FROM PollOPtions WHERE PollID = @PollID)
*SELECT @PollPercentages = (SELECT [Option], COUNT([Option]) As Num_Votes FROM Votes WHERE PollID = 1 GROUP BY [Option])
The final part(*) of this SQL will return more than one value, so is it possible for me to return all that information in one varaible with one SELECT query?? Or would I need to use a loop and query a value at a time, and store it into a delimited string?
thx in advance...
I'm looking to pull back some results but not include those that have a value in a column that matches a value in a temp table column.
The below code returns all the values rather than excluding those that are in the temp table.
Code:
------Folder Differences-----
--Create Temp Table--
CREATE TABLE #fdiff
(foldername VARCHAR(255))
SELECT
replace(
replace(foldername,'[Template] ','')
[Code] .....
I have a small problem with a join clause, because i need to return all values from my table BL:
my code is:
SELECT cast(0 as bit) as 'Escolha',data, contado , ollocal ,origem, ousrdata,ousrhora
FROM
(
SELECT noconta,banco, u_area
FROM BL
[code]....
In fact, i need to return 2 accounts (16,35) - x.NOCONTA IN (16,35), but I know that the problem is on the WHERE clause.How can do that, because i need all the condition on WHERE clause regarding my table OL, but also, i need to return my two accounts (16,35).
Hi,
We Have Been Trying To Convert Some Pf The Procs Into Functions Of Late,but There Is A Problem :-we Have Been Unable To Return More Than 1 Table Value From A Function.
Create Function F_clusters()
Returns @ki Table(names Nvarchar(200),total Int),
As
Begin
Insert @ki
Select Names,count(distinct Chremail) As From Customer
Where Chremail Is Not Null
Return
End
This Works Fine :-
And Gives The Reqd. Results.
But,
If I Am Using The Same Function To Return Two Tables Then It Doesn't Work,could You Pls Chk.
Create Function F_clusters()
Returns @ki Table(names Nvarchar(200),total Int),@k2 Table(names Nvarchar(200),total Int)
As
Begin
Declare @cnt Int
Set @cnt = 1
While @cnt <= 2
If @cnt =1
Begin
Insert @ki
Select Names,count(distinct Chremail) As From Customer
Where Chremail Is Not Null
Set @cnt = @cnt + 1
End
If @cnt =2
Begin
Insert @k2
Select @naamre,count(distinct(a.intcustomerid)) As Pura_ginti From Trcustomerpreference03july A Inner Join Cleancustomer B
On A.intcustomerid = B.intcustomerid
Where Chremail <> ' ' And Chremail Is Not Null
And Intpreferenceid In (6,7,2,3,12,10)
Set @cnt2 = @cnt2 + 1
End
End
Return
End
Can We Return Two Tables Or Is It Not Possible ?
Pls Chk Into This And Tell Me.
Thanks.
How do I:Select f1, f2, f3, from tb1 where f1=Select f1 from tb2 where f1='condition'?
View 3 Replies View RelatedI've to write a function to return a comma delimited values from a table columns
If a table has Tab1 ( Col1,Col2,Col3).
E.g. as below ( the columnName content I want to use as columns for my pivot table
CREATE FUNCTION [RPT].[GetListOfCol]
(
@vCat NVARCHAR(4000)
)
RETURNS @PList
AS
BEGIN
SELECT @PList += N', [' + [ColumnName] +']'
FROM [ETL].[TableDef]
WHERE [IsActive] = 1
AND [Category] = @vCat
RETURN;
END;
I want out put to be as below, I am getting this output from the select query independently by declaring @Plist variable and passing @vcat value, now I want it to be returned from a function when called from a select query output ,Colum1,column2,....
I have an unusual problem. I am using VB.Net 2003 and sqlexpress using .NET dataset to insert records into an timecards table. After inserting several records I tried a 'Select * from timecards' and the inserted records where not selected. if I 'select * from timecards order by employee' ( or any other field) the inserted records are selected! The table was created by an Access Upsize command.
I used Express Manager ( XM ) to try the select statements. That is how I isolated the problem. Even using a "Select * from timecards where employee = 'test' " returns the inserted test records. I found that if I use a WHERE or ORDER BY clause in the SELECT statement to .fill the .net dataset, all records are returned.
I am familiar with DB2 but I am a newbie at VB.NET and MSSQL
Any suggestions?
Thanks!
GordonG
I have tables and a function as representated by the code below. The names for objects here are just for representation and not the actual names of objects. Table RDTEST may have one or multiple values for RD for each PID. So the function GIVERD will return one or multiple values of RD for each value of PID passed to it.
When I run the following query, I get the required result except the rows for CID 500 for which PID is NULL in table T1. I want the rows for CID 500 as well with PID values as NULL.
SELECT A.CID,
A.ANI,
A.PID,
B.RD
FROM T1 AS A CROSS APPLY GIVERD(A.PID) B
CREATE TABLE [DBO].[RDTEST](
[PID] [INT] NULL,
[RD] [INT] NULL
)
[Code] ....
Ok I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
I have the following query:SELECT Month, Sum(Hits) AS Hits FROM tblHits GROUP BY Month ORDER BYMonthUnfortunately it only returns rows for months that have data assignedto them.How can I tweak this so that months 1-12 are returned, and Hits = 0 formonths with no data in the base table?Thanks.
View 2 Replies View RelatedIs there a SELECT statement that will return a the column names of a given table?
View 5 Replies View RelatedCan Somebody please show me how to acheive this, using the order details in Northwinddatabase or any other good example. as much details as possible. Many Thanks!
View 6 Replies View RelatedHi, I have something similar to the following: CREATE PROCEDURE dbo.MySproc @columnVal int = nullASBEGIN SELECT * FROM MyTable WHERE MyTable.column = @columnVal END If columnVal is not passed into the stored proc i want it to just select everything from 'MyTable' (without the WHERE clause)....how can I do this in as few lines of code possible?thanks
View 3 Replies View RelatedSo I have this table called "listings"... there are 100 unique listings with an integer ID for each.
I have another table called "ratings"... in there are multiple entries that have a listing_id field and a rating field. The rating field is a value from 0-10.
I want to select ALL "listings" from the listings table... and then sort based on the average number that the multiple rating fields in the ratings table has for that listing.
I CAN NOT figure it out!! Any help would be greatly appreciated. Please respond if I have not explained this properly. Thanks in advance.
I'm trying to understand why I can enter a query such as:
select 5,"random"
from customers;
and get two columns with 5 and "random" in every respective column field.Why don't I receive a syntax error ?
I am using this below query to sum and select maximum values from table. I have converted the cost column here and how can I possibly sum the cost column?
select ID, MAX(Dates) Dates,'$ ' + replace(convert(varchar(100),
convert(money, Cost), 1), '.00', '') Cost, MAX(Funded) Funded from Application group by ID, Dates, Cost, Funded
as i stated in the subject i want to gather the biggest five records from the table with sql, how can i do that?
View 5 Replies View RelatedCREATE TABLE product
( product_id integer
, translated_name NVARCHAR2(50) );
insert into product values(1,N'kenenisa')
insert into product values(2,N'Ethiopia')
Note that i have used N becuase it is unicode data
then
select * from product; this works fine.
select * from product where product_id=1; this also works fine,
but
select * from product where translated_name=N'kenenisa'; this doesnot work correctly, so how can i fix this problem ?
Hi,
I've got a table with trialsubscriptions. When someone orders a trialsubscription he has to fill in a form. With the values in the form I like to fill a database with some extra fields from the trialsubscription table. I get those extra fields with a datareader. But when I insert I can't use the same datareader (its an insert), I can't make two datareaders because I have to close the first one etc.
Does someone had the same problem and has some example code (or make some :-)) Some keywords are also possible!
Thanks!
Roel
DECLARE @Query varchar(8000)
Create Table
#tempCountRichard (Status varchar(50), Number Varchar(1000)
Set @Query = 'Insert Into #tempCountRichard
Select Count(Status),
[code]...
With the following SQL. When I select from the temp table I return the right count but my second column doesn't return anything.
Count Status
1010 2000
1111 2222
When I run the query that is being inserted into the the temp table I return the correct results
Count Status
1010 Pass
2000 Pass with Obs
1111 Fail
2222 None
how to select the data from the temp table exactly the same way it was inserted. As I need to select the exact same data from the insert.
I have a table 'wRelated' with the following columns
[related_id] [int]
[channel_id] [int]
[mui] [varchar]
[price_group_id]
[type_id] [int]
[related_mui] [varchar] (100)
[date_started] [smalldatetime]
[date_ended] [smalldatetime]
[date_entered] [datetime]
[deleted] [tinyint],
[rank] [int]
data in column [mui] is repeated as the table has more than one entries for the same [mui],
The requirement is to select the distinct[mui] but value in all the other columns for the same mui should be select in the next row with null for the same [mui]
The recordset expected should be something like this.
[mui],[related_mui],[price_group_id],[date_entered],[date_ended] m123,rm345,'pr','12-10-2003',12-12-2004'
null,rm789,'ar','12-1-2003',26-2-2004'
null,rm999,'xy','14-12-2002',12-2-2004'
m777,rm889,'pr','12-12-2004',12-12-2004'
null,rm785,'yy','1-10-2002',12-12-2004'
m888,rm345,'pr','2-8-2003',12-12-2004'
null,rm345,'tt','30-7-2002',12-12-2004'
I have tried Unions and temporary table inserts.
I have two tables, D and C, whose INTERSECT / EXCEPT values I'd like to insert in the following table I've created
CREATE TABLE DinCMatch (
servername varchar(50),
account_name varchar (50),
date_checked datetime DEFAULT getdate()
)
The following stmt won't work...
INSERT INTO DinCMatch
select servername, account_name from D
intersect
select servername, account_name from C
... as the number of supplied values does not match table definition.
I have 2 identical tables one contains current settings, the other contains all historical settings.I could create a union view to display the current values from table A and all historical values from table B, butthat would also require a Variable to hold the tblid for both select statements.
Q. Can this be done with one joined or conditional select statement?
DECLARE @tblid int = 501
SELECT 1,2,3,4,'CurrentSetting'
FROM TableA ta
WHERE tblid = @tblid
UNION
SELECT 1,2,3,4,'PreviosSetting'
FROM Tableb tb
WHERE tblid = @tblid
I am relatively new to SQL and as a project I have been asked to create the SQL for a simple database to record train details. I want to implement a check constraint which will prevent data from being inserted into a table if the weight of the train is more than the maximum towing weight of the locomotive. FOr instance, I need to add the unladen weight and maximum capacity of each wagon (located in the wagon type table) and compare it against the locomotive maximum pulling weight (the locomotive class table). I have the following SQL but it will not work:
check((select SUM(fwt.unladen_weight+fwt.maximum_payload) from
hauls as h,freight_wagon as fw,freight_wagon_type as fwt,train as t where
h.freight_wagon_serial_number = fw.freight_wagon_serial_number and
fw.freight_wagon_type = fwt.freight_wagon_type and
h.train_number = t.train_number) <
(select lc.maximum_towing_weight from locomotive_class as lc,locomotive as l,train as t where
lc.locomotive_class = l.locomotive_class and l.locomotive_serial_number = t.locomotive_serial_number))
The hauls table is where the constraint has been placed and is the intermediary table between train and freight wagon.
I may not have explained this very well; but in short, i need to compare the sum of two values in one table against a values located in another table...At present I keep getting a message telling me the sub query cannot return more than one row.
I have two tables A(uname,address,full_name) and B(uname,full_name). I want to update table A for all matching case of uname in table B.
View 5 Replies View RelatedHow do you get the return value(in ASP) of @@identity in a stored procedure while inserting a row?
View 2 Replies View Related