I need to do the following so that I can convert a Null value to 0 in my db... however I am getting errors "Incorrect Syntax near '='.
Facilities.PortfolioID AS PortfolioID =
CaseWhen Facilities.PortfolioID = Null then Facilities.PortfolioID = 0
End,
Hi, i have just written this:
select distinct department = case department
when 'ict' then 'Partnership Office'
when 'finance' then 'Partnership Office'
when 'Employee Development' then 'Partnership Office'
when 'Contract Compliance & MIS' then 'Partnership Office'
when 'Quality, Standards & Effective' then 'Partnership Office'
when 'Partnership administration Exe' then 'Partnership Office'
when 'Partnership Executive' then 'Partnership Office'
when 'Personnel' then 'Partnership Office'
when 'Operations' then 'Partnership Office'
when 'Quality Standards and Effectiv' then 'Partnership Office'
when 'Marketing and Communications' then 'Partnership Office'
when 'Marketing and Information' then 'Partnership Office'
else department end from personnel_records
is there some way to do this on one line, like
...
when in ('ict','finance','personnel', etc etc) then 'Partnership Office'
else
... ?
TIA
hi, this is my procedure.
CREATE procedure yard_retrieve
(
@yard varchar(50),@vessel varchar(50),@customer varchar(50)
)
AS
begin
IF EXISTS (select code_description from codeMaster where active='1' and code_description=@yard and category_code=(select category_code from categoryMaster where category_description='Yard') )
select 'found' as result
else
select 'not found' as reault
end
begin
IF EXISTS (select code_description from codeMaster where active='1' and code_description=@vessel and category_code=(select category_code from categoryMaster where category_description='vessel'))
select 'found' as reault1
else
select 'not found' as reault1
end
begin
IF EXISTS (select code_description from codeMaster where active='1' and code_description=@customer and category_code=(select category_code from categoryMaster where category_description='customer'))
select 'found' as reault2
else
select 'not found' as reault2
end
GO
if i run this procedure i need the result as following
result result1 result2
found notfound found
is this posible to do using select case ? please help me to get my need please
Hi, i've got this stored procedure:
@LidFederatieNummer varchar(20),
@ClubID int,
@LidClubNummer varchar(50),
@PersoonNaam varchar(100),
@ClubStamnummer varchar(10),
@ClubNaam varchar(50),
@SeizoenID int,
@ShowAllJN bit,
@LidFederatieJN int,
@CategorieID int
AS
BEGIN
IF @CategorieID IS NOT NULL BEGIN
DECLARE @LicentieVerplicht int
SET @LicentieVerplicht = (SELECT LicentieVerplicht FROM Categorie WHERE ID = @CategorieID)
END
IF (@ShowAllJN = 0)
BEGIN
SET RowCount 100
END
CASE @LicentieVerplicht
WHEN '1' THEN
BEGIN
SELECTDISTINCT
ClubStamnummer,
ClubID,
ClubNaam,
LidID,
PersoonID,
Persoon,
LidFederatieNummer,
LidClubNummer,
vwClubLidPersoonAlgemeen.LidClubID,
vwClubLidPersoonAlgemeen.LicentieJN,
UserName,
PersoonActiefJN,
LI.SeizoenID,
LI.LidFederatieJN
FROM vwClubLidPersoonAlgemeen
INNER JOIN Persoon P ON vwClubLidPersoonAlgemeen.PersoonID = P.ID
INNER JOIN LidInschrijving LI ON LI.LidClubID = vwClubLidPersoonAlgemeen.LidClubID AND LI.ID = (SELECT TOP 1 LidInschrijving.ID FROM LidInschrijving WHERE LidInschrijving.LidClubID = vwClubLidPersoonAlgemeen.LidClubID ORDER BY ID DESC)
WHERE
LidFederatieNummer LIKE '%'+@LidFederatieNummer+'%'AND
ISNULL(LidClubNummer,'') LIKE '%'+@LidClubNummer+'%'AND
Persoon LIKE '%'+@PersoonNaam+'%'AND
ClubStamnummer LIKE @ClubStamnummer AND
ClubNaam LIKE '%' + @ClubNaam + '%' AND
(@ClubID = 0 OR ClubID = @ClubID) AND
(@SeizoenID = 0 OR vwClubLidPersoonAlgemeen.SeizoenID = @SeizoenID) AND
(@LidFederatieJN = -1 OR CAST(@LidFederatieJN as bit) = LI.LidFederatieJN) AND
vwClubLidPersoonAlgemeen.LicentieJN = 1
Order By Persoon
END
WHEN '2' THEN
BEGIN
SELECTDISTINCT
ClubStamnummer,
ClubID,
ClubNaam,
LidID,
PersoonID,
Persoon,
LidFederatieNummer,
LidClubNummer,
vwClubLidPersoonAlgemeen.LidClubID,
vwClubLidPersoonAlgemeen.LicentieJN,
UserName,
PersoonActiefJN,
LI.SeizoenID,
LI.LidFederatieJN
FROM vwClubLidPersoonAlgemeen
INNER JOIN Persoon P ON vwClubLidPersoonAlgemeen.PersoonID = P.ID
INNER JOIN LidInschrijving LI ON LI.LidClubID = vwClubLidPersoonAlgemeen.LidClubID AND LI.ID = (SELECT TOP 1 LidInschrijving.ID FROM LidInschrijving WHERE LidInschrijving.LidClubID = vwClubLidPersoonAlgemeen.LidClubID ORDER BY ID DESC)
WHERE
LidFederatieNummer LIKE '%'+@LidFederatieNummer+'%'AND
ISNULL(LidClubNummer,'') LIKE '%'+@LidClubNummer+'%'AND
Persoon LIKE '%'+@PersoonNaam+'%'AND
ClubStamnummer LIKE @ClubStamnummer AND
ClubNaam LIKE '%' + @ClubNaam + '%' AND
(@ClubID = 0 OR ClubID = @ClubID) AND
(@SeizoenID = 0 OR vwClubLidPersoonAlgemeen.SeizoenID = @SeizoenID) AND
(@LidFederatieJN = -1 OR CAST(@LidFederatieJN as bit) = LI.LidFederatieJN)
ORDER BY Persoon
END
WHEN '3' THEN
BEGIN
SELECTDISTINCT
ClubStamnummer,
ClubID,
ClubNaam,
LidID,
PersoonID,
Persoon,
LidFederatieNummer,
LidClubNummer,
vwClubLidPersoonAlgemeen.LidClubID,
vwClubLidPersoonAlgemeen.LicentieJN,
UserName,
PersoonActiefJN,
LI.SeizoenID,
LI.LidFederatieJN
FROM vwClubLidPersoonAlgemeen
INNER JOIN Persoon P ON vwClubLidPersoonAlgemeen.PersoonID = P.ID
INNER JOIN LidInschrijving LI ON LI.LidClubID = vwClubLidPersoonAlgemeen.LidClubID AND LI.ID = (SELECT TOP 1 LidInschrijving.ID FROM LidInschrijving WHERE LidInschrijving.LidClubID = vwClubLidPersoonAlgemeen.LidClubID ORDER BY ID DESC)
WHERE
LidFederatieNummer LIKE '%'+@LidFederatieNummer+'%'AND
ISNULL(LidClubNummer,'') LIKE '%'+@LidClubNummer+'%'AND
Persoon LIKE '%'+@PersoonNaam+'%'AND
ClubStamnummer LIKE @ClubStamnummer AND
ClubNaam LIKE '%' + @ClubNaam + '%' AND
(@ClubID = 0 OR ClubID = @ClubID) AND
(@SeizoenID = 0 OR vwClubLidPersoonAlgemeen.SeizoenID = @SeizoenID) AND
(@LidFederatieJN = -1 OR CAST(@LidFederatieJN as bit) = LI.LidFederatieJN) AND
vwClubLidPersoonAlgemeen.LicentieJN = 0
Order By Persoon
END
According the value of my @LicentieVerplicht variable:
DECLARE @LicentieVerplicht intSET @LicentieVerplicht = (SELECT LicentieVerplicht FROM Categorie WHERE ID = @CategorieID)
My where clausule should change... how can i achieve this cause my case is not working because it is not inside the select statement
Hi everyone,
I have the following problem withj this query:
SELECT DocNumber,
Title,FirstName,LastName,Paper,
ANNO,Location,Keywords,
URL= case WHEN URL IS NULL THEN
'|<a
href=''https://illiad.library.nova.edu/illiad/FNN/illiad.dll?ILLiadRedirect=OpenURL&genre=thesis&isbn='+CONVERT(varchar,DocNumber)+'&title='+CONVERT(varchar,Title)+'&rft.pub='+CONVERT(varchar,Program)+'&rft.edition='+
CONVERT(varchar,Paper) +'&date='+ CONVERT(varchar,ANNO)+
'&aulast=' + CONVERT(varchar,Lastname) + '&aufirst=' +
CONVERT(varchar,Firstname)+
'&url_ver=Z39.88-2004&rfr_id=info:sid/MARPS:Practicum''target=''blank'')>
Order through ILLiad</a>' ELSE URL END
FROM DocTable1 WHERE FREETEXT....
When URL is null, I don't get the string showing. It works properly only in the query analyzer.
Any ideas?
Christian
I'm using a 'searched case' however I don't care which method I use.
I'm open to using anything....
I just want to correct a problem in my pivot table where I need to create a ficticous eventdate for 'S' records, those that do not have an event date in the past 7 days.
-- eventdate is a datetime column
select User
,res =
case res --event result
when 'S' then '0' --S generic non-event
when 'SUC' then '1' --successfull event
end
,eventdate =
case eventdate
when enventdate < getdate()-8 then getdate()-8
end
from eventlog_1 --my view of events
Server: Msg 170, Level 15, State 1, Line 8
Line 8: Incorrect syntax near '<'.
TIA
JeffP...
I am doing a mail merge from data returned from a query. My problem is one of my fields is to long for the document. I want to be able to break up the line into 2 sections. I'm assuming I can do this within the case statement but am unsure how.
This is the code I have. I want the break to come before the "at".
case
when rb.building in (9420,420) then 'DEERFIELD SUMMER SCHOOL at BAKER WOODS #99'
when rb.building=9722 then 'JAMES SUMMER SCHOOL' 'at JOHN MARSHALL MS'
when rb.building=9723 then 'NORTHWEST SUMMER SCHOOL at CRISPUS ATTUCS MS'
when rb.building=9717 then 'BROAD SUMMER SCHOOL at SIDENER MS'
when rb.building=9715 then 'MANUAL SUMMER SCHOOL at MCFARLAND MS'
else upper(trim(rb.building_name)) end,
Hey guys, i'm trying to use a CASE within a select but i'm not sure how to get started.
Here is my select so far, i'm inserting into a temp table that is used within a loop to gather data from my trigger:
Code:
insert into @temp_par
select CONVERT(varchar(20),d.PAT_ID),
ep.EXT_PAT_ID,
d.DRUG_DESC_ID,
d.ALLERGY_CD,
CONVERT(varchar(20),d.PAR_DT,120),
ISNULL(d.PAR_TXT, 'NULL'),
ISNULL(REPLACE(m.DRUG_NM,'"','^"'),'NULL'),
ISNULL(m.DOSAGE_FORM_CD,'NULL'),
ISNULL(m.STRGTH,'NULL'),
ISNULL(m.STRGTH_UM,'NULL')
from deleted d --PATIENT_PRIOR_ADVERSE_REACTIONS
join EXTERNAL_PATIENT ep on ep.PAT_ID = d.PAT_ID
join MEDNAME m on m.DRUG_DESC_ID = d.DRUG_DESC_ID
I would like to use a CASE for the d.ALLERGY_CD column. The data in this column is usually a 1,2,3,4,5 but i'd like to convert those to their real data, for example:
Code:
1 = A
2 = B
3 = C
4 = D
5 = E
Any help?
Limitations: Needs to be single sql statement for exec, no udf/stored proc
Objective: select aggregate count from tblPerson grouped by s_fk, division,Desc, areaDesc with rollup for totals
if mail_goes_to=1, get the s_fk value via tblPerson/tblAffiliation/tblOrg/tblCity/tblCounty
if mail_goes_to=2, get the s_fk value via tblPerson/tblCity/tblCounty, skipping tblAffiliation/tblOrg
What's the best method? A case statement? Would a cross-join work? Thanks so much for any and all advice!
tblPerson: person_pk, affiliation_fk; home_city_fk, mail_goes_to
tblAffiliation: affiliation_pk, organization_fk
tblOrg: organization_pk, city_fk
tblCity: city_pk, county_fk
tblCounty: county_pk, s_fk
For resulting display only:
tblPersonArea: personArea_pk, area_fk, person_fk
tblArea: area_pk, areaDesc, division_fk
tblDivision: division_pk, divisionDesc
Hello !
For MS SQL 2000/2500
I am having a table ::
User
Ident int NOT NULL,
Numb int NOT NULL,
Info nvarchar(100) NOT NULL,
with this query ::
SELECT Numb, Info, Ident
FROM Users
WHERE (Numb IN (100,200, 300))
ORDER BY Ident
I get ::
Numb | Info | Ident
100 | dgwrg | 1
200 | dgeth yiuyi | 1
300 | Agt hgn ngtn | 1
100 | jttytujky | 2
200 | yjtut iuiu | 2
300 | dgd 2gggwekew | 2
what I need is something like::
SELECT
(CASE WHEN Users.Numb = 100 THEN Users.Info END) AS InfoA,
(CASE WHEN Users.Numb = 200 THEN Users.Info END) AS InfoB,
(CASE WHEN Users.Numb = 300 THEN Users.Info END) AS InfoC,
Ident
FROM Users
WHERE Ident = Ident (for the same Ident)
to get ::
InfoA | InfoB | InfoC | Ident
dgwrg | dgeth yiuyi | Agt hgn ngtn | 1
jttytujky | yjtut iuiu | dgd 2gggwekew | 2
Actually I am getting a NULL value everywhere
of course I cannot use MAX(CASE WHEN ... , or I am getting only a few rows and not all
thanks a ton for helping
OK so I want to use datepart(month,getdate() with a Case statement with this logic:
SELECT CASE
datepart(month,getdate()='8' then
SELECT *
FROM [Master]
WHERE [Month]='Jul'
END
OK what's wrong with the code?
The following code is a front end parameter - Quantity but when the user enters '0' it is not returning any rows (there are). Is there something wrong here or to add something?
(Select {?Quantity}
CASE "ALL":
1=1
CASE "Negative":
({ACBALMPK.IRQOH#}<0) OR ({ACBALMPK.IEQOH#}<0)
CASE "Zero":
({ACBALMPK.IRQOH#}=0) OR ({ACBALMPK.IEQOH#}=0)
CASE "Greater than Zero":
({ACBALMPK.IRQOH#}>0;) OR ({ACBALMPK.IEQOH#}>0;))
Hi,
I'm wondering what syntax to use for a select case statement.
I have a list of questions. If a particular question is on the list, then it shouldn't show some other related questions.
For example, "have you been in the military?". If you haven't , then you wouldn't be asked all the military related questions.
So- I'm saying:
select case when question_id = 488 then don't return question_id 220, 962, 963
I'm trying something like this:
select q.client_id,
case when q.question_id = 488 then end q.question_id = 220 else q.question_id = 220 end q.question_id
from questions_yes_no q
How would I say 'dont show' question 220? End is not the way to go, obviously.
If you can see what I'm trying to do, can you point me to an article or bol search?
Thank you for any help.
Select Case l.GLTransactionTypeID
When 'Asset' --AND l.GLTransactionDate BETWEEN convert(datetime,'1/1/2007')AND convert(datetime,'12/31/2007') and l.GLTransactionSource=@assetID
Then Begin Set @Cost=l.GLtransactionAmount end
end from LedgerTransactions l,FixedAssets f where l.GLtransactionsource=f.assetID and l.GLtransactionsource= @assetID
Hi,
I looked up select case statements and have used them for returning single values, but can't seem to get it working when returning a select statement..
I have my SPROC configured as below, can anyone help me out as to why its not working?
btw previously I had been using something like below, but in this case it wont work as I have to make more changes than just the WHERE genderID = @genderID (hmm, hopefully that makes sense, if not ignore my example lol)
IF @genderID > 2
..
ELSE
........WHERE genderID = @genderID
thanks very much once again!
mike123
CREATE PROCEDURE [dbo].[select_123]
(
@genderID tinyint
)
AS SET NOCOUNT ON
SELECT
CASE @genderID
WHEN 1 THEN
SELECT TOP 40 *
FROM tbl
WHERE .......
WHEN 2 THEN
SELECT TOP 40 *
FROM tbl
WHERE .......
ELSE
SELECT TOP 40 *
FROM tbl
WHERE .......
END
I'm still new to T-SQL and have been trynig to find an equivalent to VB's select case. Is the IF statement all that's available?
View 6 Replies View RelatedHello,
I have an application that at the begining a user will login with a user name and password which is stored in the database. The SQL statement is as follows:
"SELECT id_employee FROM employee WHERE employee_number='" + txtUserName.Text + "' AND passWord='" + txtPassword.Text + "'";
For testing purposes I have set the password to the word test. The problem is, if the user enters in TEST or TeSt or TESt it will grant them access. How do I set it to force the correct case?
I am using SQL 2005 for the database.
Thanks!
~zero
INSERT INTO #rpt(Hic, DtImported, Source, PlanID, LastName, FirstName, MemID, CaseStatus)
SELECT
s.Hic,
s.DtImported,
s.Source,
dbo.LastErolledPlan_C_D(s.Hic,s.IsPart_C) as PlanID,
m.LastName,
m.FirstName,
dbo.GetMemID_PartC_D(s.Hic,s.IsPart_C) as MemID,
s.CaseStatus = CASE WHEN CaseStatus ='1' or CaseStatus='0' THEN 'New'
CASE WHEN CaseStatus <>'1' or <> CaseStatus <>'0' Old
ElSE 'No Valid'
End
from tbEsccSuspects s inner join tbPDMMembers m
on s.Hic = m.HicNumber
Where s.EUFStatus = 1 -- AND DtEUFSent is NULL
what I am doing wrong in the case statment that I am getting an error. ?????
I have a select query
select col1-tbl2,col2-tbl3,col3-tbl4 ,col4-tbl1,col5-tbl1 from tbl1where condition,
The above quey col1-tbl2,col2-tbl3,col3-tbl4 are from table1 only, but it have only id(ie) the foreign key references of tables 2,3,4
I want the column with their values to join with the tables 2,3,4.
Except USING CASE
Except USING CASE
Please Guide me
Hi,I am wondering how do I write a query that will take case sensitive into consideration. For example, I have "ABCD", "abcD", ABcd", "AbCd" in a table. I want to retrieve "AbCd" only from the table. This is the sql statement that I have:sqlSelect = "SELECT * FROM [al_table] WHERE [alphabet]= @alpha"Dim selectCmd As New SqlCommand(sqlSelect, myConnection) selectCmd.Parameters.AddWithValue("@alpha", "AbCd") From what I have it will return all those value. But that is not what I want. Thanks
View 4 Replies View RelatedFor example,
select fieldA form tableA where fieldA = 'aaa'
I got following output
fieldA
---------
aaa
aAa
AAA
AAa
...
if I want select only the lower case 'aaa', how can I do that?
I need to pull one field from one table and one field from another table that is i need to pull 'eGroupName' field from 'Exception' Table and 'eGroup Description' field from 'eGroup' Table but there is no connection between these two tables means there is no forign key relationship between these two tables but i need to pull both fields . If i use INNER JOIN i need to mention relationship between both tables right? so how to write query for this , and one more thing is i need to add an extra column as "Location"which is not there in either of tables for that i need to use CASE Statement as if DataSource = 1 then "ABC" else "BCD" . pls help me out in writing SQL Statement???
is this correct ?? its showing me errors
Select Exception.eGroupName, eGroup.eGroupDescription from Exception Inner Join eGroup ON ???
(case when 'DataSource =1' then 'ABC' then 'BCD' endcase)
Where .....
Pls correct me
Thanks
DECLARE @UserEmail as Varchar(50)
DECLARE @UserZipPassword as Varchar(50)
DECLARE @CoupMember as int
DECLARE @member As Bit
--Check if Email Exists…. If yes Then
--
SELECT @RewardsMember = COUNT(*),
@member =CASE M.EMAIL
WHEN ((LEN(EMAIL)) <> 1)
THEN 1
WHEN (LEN(EMAIL)) IS NULL THEN 0
END
FROM MemberTable M
Trying to get information from table for User based on data provided. What I am trying to do up there is check to see if User provided correct Email, if User provided right password and if User provided right zip code. Basically, I need to return bit values to my client application from this. Ran into some problem with my SELECT CASE statement up there. Need help please. Thanks in Advance.
hi,friend
is it possible to use 'select case' statment in sql query.
give any idea or solution.
thanks in advance.
Hi All,
I need a hand in this script.
SELECT a.id ,value = CASE
when (x1-x0) = 0 then
((Y2-Y0)-(Y1-Y0))/(0.000000001*(X2-X0))
ELSE
((-111.48277-Y0)-(Y1-Y0))/((X1-X0)*(32.72383-X0))
END
,value2 = CASE
when (x1-x0) = 0 then
((Y2-Y0)-(Y1-Y0))/(0.000000001*(X2-X0))
ELSE
((-111.48277-Y0)-(Y1-Y0))/((X1-X0)*(32.72383-X0))
END
FROM table_name a
where value > 0
ORDER BY VALUE
The problem I'm having is in the where clause. Because the value is not a column name sql server is giving me an error. I need to evaluate the value returned. How can I get around this problem? Any sort of advise will help!
Thank you in advance!
Hi folks,
Hope you are all well.
I am using a CASE statement within a SELECT query to sum up values for different customers.
SELECT CR_CUST.Customer_Code,
'General_01' = CASE WHEN CR_PROD.Part_Class_Code = '01' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END,
'General_07' = CASE WHEN CR_PROD.Part_Class_Code = '07' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END,
'General_08' = CASE WHEN CR_PROD.Part_Class_Code = '08' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END
FROM CR_CUST
INNER JOIN CR_INVOICE ON CR_CUST.Customer_Code = CR_INVOICE.Customer_Code
INNER JOIN CR_PROD ON CR_INVOICE.Product_Code = CR_PROD.Product_Code
WHERE (CR_PROD.Part_Class_Code = 1 OR
CR_PROD.Part_Class_Code = 7 OR
CR_PROD.Part_Class_Code = 8)
GROUP BY CR_CUST.Customer_Code,
CR_PROD.Part_Class_Code
The above query produces the following results...
Customer_Code General_01 General_07 General_08
------------- ---------------- ---------------- ----------------
02210 10074.30 .00 .00
02347 7606.49 .00 .00
02210 .00 12618.42 .00
02347 .00 13131.63 .00
02210 .00 .00 4505.44
02347 .00 .00 5018.03
My question is this - is it possible to expand my SQL Query into a Sub Query so that each customers data appears on the same line of the results?, like so...
Customer_Code General_01 General_07 General_08
------------- ---------------- ---------------- ----------------
02210 10074.30 12618.42 4505.44
02347 7606.49 13131.63 5018.03
I can achieve this by writing my results into a temporary table and extracting the data with the following SQL Query, but I just thought it would be really cool if I could do it in one SQL Statement without using a temporary table.
SELECT Customer_Code,
SUM(General_01),
SUM(General_07),
SUM(General_08)
FROM #MyTempTable
GROUP BY Customer_Code
Thanks in advance,
Kev
I know I should know the answer to this, but I just can't quite get the syntax down
Code:
Select case when zipCode = '10185' Then 'Deliver'
Else when zipCode = '2309' And paid = 'Yes' Then 'Deliver'
Else When zipCode = '1291' And paid = 'Yes' Then 'Deliver'
Else When zipCode = '88221' And paid = 'No' Then 'Hold'
Else when zipCode = '34123' Then 'Deliver'
End
From postalDeliveryDatabase
Update ed_abcdeeh set category = case when name_of_school = '' then category = 'No Facility' else '' end,status = case when name_of_school = '' then status = 'Non-Compliant' else 'Compliant' end.
How to make this query right.. when name of school is blank i want to update my category to No facility, but if the name of school has data it will just make it blank. same to the status..
VFP9.0 via MySQL 5.0
HELP!!!I am trying to fine tune or rewrite my SELECT statement which has acombination of SUM and CASE statements. The values are accurate, butthe query is slow.BUSINESS RULE=============1. Add up Count1 when FIELD_1 has a value and FIELD_2 is NULL, or bothhave a value.2. Add up Count2 when FIELD_2 has a value and FIELD_1 is NULL.4. TotalCount = Count1 + Count2 -- (Below, basically had to reuse theSQL from both Count1 and Count2)3. Add a NoneCount when both FIELD_1 and FIELD_2 are NULL.SQL Code========SELECTSUM(CASEWHEN ((FIELD_1 IS NOT NULL AND FIELD_2 IS NULL) OR (FIELD_1 IS NOTNULL AND FIELD_2 IS NOT NULL))THEN 1ELSE 0END) AS Count1 ,SUM(CASEWHEN (FIELD_1 IS NULL AND FIELD_2 IS NOT NULL)THEN 1ELSE 0END) AS Count2,SUM(CASEWHEN (FIELD_1 IS NULL AND FIELD_2 IS NOT NULL)THEN 1ELSE (CASE WHEN ((FIELD_1 IS NOT NULL AND FIELD_2 IS NULL) OR FIELD_1IS NOT NULL AND FIELD_2 IS NOT NULL) THEN 1 ELSE 0 END)END) AS Total_Count,SUM(CASEWHEN ( FIELD_1 IS NULL AND FIELD_2 IS NULL)THEN 1ELSE 0END) AS None_Count,FROMTABLE_1
View 1 Replies View Related
Here's what I have and it's not working.
Code Block
SELECT [userID],
CASE
WHEN [mdlName] = NULL AND [mdnName] = NULL THEN [lstName] + ', ' + [fstName]
WHEN [mdlName] <> NULL AND [mdnName] <> NULL THEN [lstName] + ', ' + [fstName] + ' ' + [mdlName] + ' ' + [mdnName]
WHEN [mdlName] <> NULL AND [mdnName] = NULL THEN [lstName] + ', ' + [fstName] + ' ' + [mdlName]
WHEN [mdnName] <> NULL AND [mdlName] = NULL THEN [lstName] + ', ' + [fstName] + ' ' + [mdnName]
END AS [Full Name]
FROM [grUser]
ORDER BY [Full Name] ASC
The [Full Name] is always null. Any idea why? What I'm trying to do is if mdlName (middle name) and mdnName (maiden name) is null then display the lstName (last name) and fstName (first name) only and so on.
Any help is much appreciated.
How come SQL Server doesn't like the following?
CREATE PROCEDURE sp_myproc
(@myvar int)
AS
CASE @myvar
WHEN 1
EXEC sp1
WHEN 2
EXEC sp2
WHEN 3
EXEC sp3
DEFAULT
EXEC sp3
END
How can I code something like this legally in T-SQL?
Thanks
Jason
Hello everybody
I have problem with CASE statement. Here is select it
Code Block
select
mev.Id
,mev.MetaElementId
,mev.ElementValue
,mev.DocumentId
,me.ElementTypeId
,castedValue =
case
when me.ElementTypeId =3 then cast(mev.ElementValue as integer)
when me.ElementTypeId =4 then cast(mev.ElementValue as datetime)
end
from dbo.tbMetaElementValue mev
inner join dbo.tbMetaElement me
on mev.MetaElementId = me.Id
where mev.MetaElementId =7
it returns
Id
MetaElementId
ElementValue
DocumentId
ElementTypeId
castedValue
49
7
2006
28
3
6/30/1905 0:00
53
7
2004
30
3
6/28/1905 0:00
61
7
2006
36
3
6/30/1905 0:00
67
7
2005
38
3
6/29/1905 0:00
70
7
2004
39
3
6/28/1905 0:00
105
7
2003
63
3
6/27/1905 0:00
166
7
2006
109
3
6/30/1905 0:00
195
7
2005
129
3
6/29/1905 0:00
220
7
2005
150
3
6/29/1905 0:00
223
7
2006
151
3
6/30/1905 0:00
As you can see it should return castedValue as integer but it cast to datetime which is wrong. If I commented line
Code Block
when me.ElementTypeId =4 then cast(mev.ElementValue as datetime)
it casts everything normal, but as soon as it has more than one condition in CASE it will choose anything but not right casting
Looks like I am missing something really fundamental. Any help is apreciated !
Thanks
Hi, I have created a login page (webform1) that enables me to enter my user number and password and if correct it re-directs to webform 2 where all data related to the usernumber that was entered in the login page, appears. Now I want to be able to set different re-direct pages dependant upon different users as some may require more privileges then others. As for my query I have 2 types of users: staff and managers. I want to set the login page so that if staff logins in it goes webform 3 and if manager logins in it goes webform 4. My table in the Sql database is called Users & the fields are: unumber(pk), pwd, userRole, forename, surname. I have been advised to use CASE statements, yet I do not know how to use them. Below have left my code of a simple login without the userRole validation. Please help! Sub cmdLogin_ServerClick If ValidateUser(txtUserNumber.Value, txtUserPass.Value) Then Dim tkt As FormsAuthenticationTicket Dim cookiestr As String Dim ck As HttpCookie tkt = New FormsAuthenticationTicket(1, txtUserNumber.Value, DateTime.Now(), _ DateTime.Now.AddMinutes(30), chkPersistCookie.Checked, "your custom data") cookiestr = FormsAuthentication.Encrypt(tkt) ck = New HttpCookie(FormsAuthentication.FormsCookieName(), cookiestr) If (chkPersistCookie.Checked) Then ck.Expires = tkt.Expiration ck.Path = FormsAuthentication.FormsCookiePath() Response.Cookies.Add(ck) Dim strRedirect As String strRedirect = Request("ReturnURL") If strRedirect <> "" Then Response.Redirect(strRedirect, True) Else strRedirect = "webform1.aspx" Response.Redirect(strRedirect, True) End If Else Response.Redirect("webform3.aspx", True) End If End Sub
View 1 Replies View Related