Select * From Table Where Column = @AllValues?

Sep 6, 2005

Hello,
I am passing a value to a stored procedure in vb.net to get normally a
selection of the table. How could I get the complete table without
writing the code twice? Many thanks in advance ....

View 9 Replies


ADVERTISEMENT

How Can I Create A New Table With Its Column Named From Another Table's One Column Value By Using A Select Sentence?

Sep 27, 2006

For example,I have a table "authors" with a column "author_name",and it has three value "Anne Ringer,Ann Dull,Johnson White".Here I want to create a new table by using a select sentence,its columns come from the values of the column "author_name".

can you tell me how can I complete this with the SQL?

View 2 Replies View Related

Select Column Value Which Is Selected From A Column Of Another Table

Jan 2, 2004

i need help to get the value of a column which is selected from a column of another table....

View 3 Replies View Related

Select Column From Table 2 If Not Exist On Table 1

Oct 16, 2014

I am trying to pull a min value of a date column from table 1, if table 1 does not have any record I need pull a date column from table 2. Table 2 will always have a unique record ID (No duplicate ID's).

Table 1

ID date
1 1/1/2014
1 1/5/2014

Table 2

ID date
1 1/5/2014
2 10/15/2014

Here is the desired result when running for ID = 1 (select Min(date) where ID = 1, I should be getting 1/1/2014 from Table 1.

If I am running the same query where ID=2 then I should be getting 10/15/2014 from Table 2. So basically I need to check if a value exists on Table 1 first, if there is no value on Table 1 and then to grab the value from Table 2.

View 4 Replies View Related

Why Can't I Do A Select From A Remote Table Having An XML Column??

Nov 2, 2006

Hey, I'm just trying to do select top 1 * from lnksql1.db1.dbo.Table1. This table has a column which is an xml column. It returns an error saying "

Xml data type is not supported in distributed queries. Remote object 'LNKSQL1.db1.dbo.table1' has xml column(s).

"

What's the workaround for this? Thank you.

View 1 Replies View Related

How To Select All Columns Except One Column From A Table ?

Oct 6, 2006

Hi

I can't figure out how to do this and hope you guys can give me a hint....

I want to select all columns from a table except one column:

For example,


A table has 20 columns : {1,2,3.....20}

To select all of columns in a table, i could use
select * from table;

However, I want to select only column {1....19}

I do not want to type the column names in one by one in the SQL query,

is there a way to achieve this in a short form of Select?

Thanks,

View 15 Replies View Related

How Do I Get The Actual Name Of A Column Or Table In A Sql Select Statement?

Jul 12, 2004

Hello fellow .net developers,

In a website I'm working on I need to be able to put all of the user tables in a database in a dropdownlist.

Another dropdownlist then will autopopulate itself with the names of all the columns from the table selected in the first dropdownlist.

So, what I need to know is: is there a sql statement that can return this type of information?

Example:

Table Names in Database: Customers, Suppliers

Columns in Customers Table: Name, Phone, Email, Address

I click on the word "Customers" in the first dropdownlist.

I then see the words "Name", "Phone", "Email", "Address" in the second dropdownlist.

I'm sure you all know this (but I'll say it anyways): I could hardcode this stuff in my code behind file, but that would be really annoying and if the table structure changes I would have to revise my code on the webpage. So any ideas on how to do this the right way would be really cool.

Thanks in advance,

Robert

View 5 Replies View Related

Why SELECT AVG(column) From Table Is Not Working In Jet Database?

Feb 10, 2007

Hello,

XPSP2
VB 2005 Express
Jet/Access database

One of the Forms of these application display a Jet database table. Why querries Min, Max, Avg do not work?

Thanks,

View 8 Replies View Related

Select Distinct Column Data With Other Values From The Table

Dec 16, 2004

I have a table 'wRelated' with the following columns

[related_id] [int]
[channel_id] [int]
[mui] [varchar]
[price_group_id]
[type_id] [int]
[related_mui] [varchar] (100)
[date_started] [smalldatetime]
[date_ended] [smalldatetime]
[date_entered] [datetime]
[deleted] [tinyint],
[rank] [int]
data in column [mui] is repeated as the table has more than one entries for the same [mui],
The requirement is to select the distinct[mui] but value in all the other columns for the same mui should be select in the next row with null for the same [mui]
The recordset expected should be something like this.

[mui],[related_mui],[price_group_id],[date_entered],[date_ended] m123,rm345,'pr','12-10-2003',12-12-2004'
null,rm789,'ar','12-1-2003',26-2-2004'
null,rm999,'xy','14-12-2002',12-2-2004'
m777,rm889,'pr','12-12-2004',12-12-2004'
null,rm785,'yy','1-10-2002',12-12-2004'
m888,rm345,'pr','2-8-2003',12-12-2004'
null,rm345,'tt','30-7-2002',12-12-2004'

I have tried Unions and temporary table inserts.

View 1 Replies View Related

SELECT Statement To Return Table Column Names

Aug 16, 2004

Is there a SELECT statement that will return a the column names of a given table?

View 5 Replies View Related

SELECT INTO A New Table All Columns Based On DISTINCT Value Of One Column

Oct 31, 2014

‘Trying to SELECT INTO a new table all columns of a table based on a DISTINCT value of one column so for example:

SELECT *
INTO new_table
FROM old_name
WHERE old_table.column IS DISTINCT’

View 4 Replies View Related

How To Select Data From Excel Table By Original Column Order?

Feb 21, 2007

Hello, everyone:

I have an Excel table that has columns like,

Vendoe_Name
Level
Address
Email
Phone

I use the statemen

SELECT * FROM OPENDATASOURCE('Microsoft.Jet.OLEDB.4.0',
'Data Source=C: est.xls;Extended Properties=Excel 8.0')...[Sheet1$]

and got output by column order,

Address
Email
Level
Phone
Vendoe_Name

How to make output by original column order like,

Vendoe_Name
Level
Address
Email
Phone

Any help will appreciated. Thanks

ZYT

View 1 Replies View Related

SQL Server 2012 :: Select Rows With Sum Of Column From Joined Table?

May 2, 2015

I want to return all rows in table giftregistryitems with an additional column that holds the sum of column `amount` in table giftregistrypurchases for the respective item in table giftregistryitems.

What I tried, but what returns NULL for purchasedamount:

SELECT (SELECT SUM(amount) from giftregistrypurchases gps where registryid=gi.registryid AND gp.itemid=gps.itemid) as purchasedamount,*
FROM giftregistryitems gi
LEFT JOIN giftregistrypurchases gp on gp.registryid=gi.id
WHERE gi.registryid=2

How can I achieve what I need?

Here are my table definitions and data:

/****** Object: Table [dbo].[giftregistryitems] Script Date: 02-05-15 22:37:11 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[giftregistryitems](
[id] [int] IDENTITY(1,1) NOT NULL,

[code].....

View 0 Replies View Related

SQL Server 2014 :: Select Data From Table With A Particular Column Priority

Aug 1, 2015

DECLARE @Table TABLE
(minv_code INT,
alert_msg varchar(10),
alert_time Datetime)

[Code]....

i want to select the data priority wise
the o/p should look like below

first row - 873939, 'Meter', '7/24/2015 3:31:22'
second row - 873939, 'Tamper', '7/24/2015 3:30:00'
third row - 873939, 'Reverse', '7/24/2015 3:31:18'
fourth row -873940, 'Tamper', '7/24/2015 3:31:22'
fifth row - 873940, 'Reverse', '7/24/2015 3:30:00'

View 1 Replies View Related

Select Into Statement Without Taking Auto Increment Of ID Column To The New Table

Mar 7, 2011

Due to localization I have the need to make child tables, where there is a composite Primary Key, between the Id column and the LanguageSign column. On the parent table the Id column is Identity column with auto increment.

The problem is that during the select into query to copy columns from parent to child, this auto increment behaviour of the parent-Id is copied to the child-Id. However I do not want that, because the same Id will be used by different LanguageSign entries

Is there a way to use 'select into' without copying the auto increment, or is my only option to make a whole new column without auto increment on the child and copy the records?
 
btw I have used this statement

SET
IDENTITY_INSERT MyTable

ON , so that inserting into the Id column is possible. I can see however that this does not take away the auto increment...

View 4 Replies View Related

Transact SQL :: Select Multiple Columns From Table But Group By One Column

Jun 17, 2015

I have a SQL query like this

select CurrencyCode,TransactionCode,TransactionAmount,COUNT(TransactionCode) as [No. Of Trans] from TransactionDetails where CAST(CurrentTime as date)=CAST(GETDATE()as date) group by TransactionCode, CurrencyCode,TransactionAmount order by CurrencyCode

As per this query I got the result like this

CurrencyCode TransactionCode TransactionAmount No.OfTrans
AED     BNT    1     1
AED     BNT     12     1
AED     SCN     1     1
AED     SNT     1     3

[Code] ....

But I wish to grt result as

CurrencyCode TransactionCode TransactionAmount No.OfTrans
AED     BNT   13     2
AED     SCN     1     1
AED     SNT     11     7
AFN     BPC    8     6

[Code] ....

I also tried this

select CurrencyCode,TransactionCode,TransactionAmount,COUNT(TransactionCode) as [No. Of Trans]
from TransactionDetails where CAST(CurrentTime as date)=CAST(GETDATE()as date)
group by TransactionCode order by CurrencyCode

But of course this codes gives an error, but how can I get my desired result??

View 5 Replies View Related

Random Selection From Table Variable In Subquery As A Column In Select Statement

Nov 7, 2007

Consider the below code: I am trying to find a way so that my select statement (which will actually be used to insert records) can randomly place values in the Source and Type columns that it selects from a list which in this case is records in a table variable. I dont really want to perform the insert inside a loop since the production version will work with millions of records. Anyone have any suggestions of how to change the subqueries that constitute these columns so that they are randomized?




SET NOCOUNT ON


Declare @RandomRecordCount as int, @Counter as int
Select @RandomRecordCount = 1000

Declare @Type table (Name nvarchar(200) NOT NULL)
Declare @Source table (Name nvarchar(200) NOT NULL)
Declare @Users table (Name nvarchar(200) NOT NULL)
Declare @NumericBase table (Number int not null)

Set @Counter = 0

while @Counter < @RandomRecordCount
begin
Insert into @NumericBase(Number)Values(@Counter)
set @Counter = @Counter + 1
end


Insert into @Type(Name)
Select 'Type: Buick' UNION ALL
Select 'Type: Cadillac' UNION ALL
Select 'Type: Chevrolet' UNION ALL
Select 'Type: GMC'

Insert into @Source(Name)
Select 'Source: Japan' UNION ALL
Select 'Source: China' UNION ALL
Select 'Source: Spain' UNION ALL
Select 'Source: India' UNION ALL
Select 'Source: USA'

Insert into @Users(Name)
Select 'keith' UNION ALL
Select 'kevin' UNION ALL
Select 'chris' UNION ALL
Select 'chad' UNION ALL
Select 'brian'


select
1 ProviderId, -- static value
'' Identifier,
'' ClassificationCode,
(select TOP 1 Name from @Source order by newid()) Source,
(select TOP 1 Name from @Type order by newid()) Type

from @NumericBase



SET NOCOUNT OFF

View 14 Replies View Related

Is There A Method To Convert Select * From Table To Select Field1,field2,...fieldn From Table ?

Nov 29, 2007

Is there a method to convert "Select * From Table" to "Select field1,field2,...fieldn From Table" ?
 
Thanks

View 1 Replies View Related

SQL Server 2012 :: Select Statement That Take Upper Table And Select Lower Table

Jul 31, 2014

I need to write a select statement that take the upper table and select the lower table.

View 3 Replies View Related

Declaring A Table Variable Within A Select Table Joined To Other Select Tables In Query

Oct 15, 2007

Hello,

I hope someone can answer this, I'm not even sure where to start looking for documentation on this. The SQL query I'm referencing is included at the bottom of this post.

I have a query with 3 select statements joined together like tables. It works great, except for the fact that I need to declare a variable and make it a table within two of those 3. The example is below. You'll see that I have three select statements made into tables A, B, and C, and that table A has a variable @years, which is a table.

This works when I just run table A by itself, but when I execute the entire query, I get an error about the "declare" keyword, and then some other errors near the word "as" and the ")" character. These are some of those errors that I find pretty meaningless that just mean I've really thrown something off.

So, am I not allowed to declare a variable within these SELECT tables that I'm creating and joining?

Thanks in advance,
Andy



Select * from

(

declare @years table (years int);

insert into @years

select

CASE

WHEN month(getdate()) in (1) THEN year(getdate())-1

WHEN month(getdate()) in (2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12) THEN year(getdate())

END

select

u.fullname

, sum(tx.Dm_Time) LastMonthBillhours

, sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) lasmosbillingpercentage

from

Dm_TimeEntry tx

join

systemuserbase u

on

(tx.owninguser = u.systemuserid)

where

Month(tx.Dm_Date) = Month(getdate())-1

and

year(dm_date) = (select years from @years)

and tx.dm_billable = 1

group by u.fullname

) as A

left outer join

(select

u.FullName

, sum(tx.Dm_Time) Billhours

, ((sum(tx.Dm_Time))

/

((day(getdate()) * ((5.0)/(7.0))) * 8)) perc

from

Dm_TimeEntry tx

join

systemuserbase u

on

(tx.owninguser = u.systemuserid)

where

tx.Dm_Billable = '1'

and

month(tx.Dm_Date) = month(GetDate())

and

year(tx.Dm_Date) = year(GetDate())

group by u.fullname) as B

on

A.Fullname = B.Fullname

Left Outer Join

(

select

u.fullname

, sum(tx.Dm_Time) TwomosagoBillhours

, sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) twomosagobillingpercentage

from

Dm_TimeEntry tx

join

systemuserbase u

on

(tx.owninguser = u.systemuserid)

where

Month(tx.Dm_Date) = Month(getdate())-2

group by u.fullname

) as C

on

A.Fullname = C.Fullname

View 1 Replies View Related

Transact SQL :: How To Select Rows From Table Where DATE Column Is Today's Date

Aug 31, 2015

So my data column [EODPosting].[MatchDate] is defined as a DATE column. I am trying to SELECT from my table where [EODPosting].[MatchDate] is today's date.

SELECT*
FROM[dbo].[EODPosting]
WHERE[EODPosting].[MatchDate]=GETDATE()

Is this not working because GETDATE() is like a timestamp format? How can I get this to work to return those rows where [EODPosting].[MatchDate] is equal to today's date?

View 2 Replies View Related

Is It Possible To Re-reference A Column Alias From A Select Clause In Another Column Of The Same Select Clause?

Jul 20, 2005

Example, suppose you have these 2 tables(NOTE: My example is totally different, but I'm simply trying to setupthe a simpler version, so excuse the bad design; not the point here)CarsSold {CarsSoldID int (primary key)MonthID intDealershipID intNumberCarsSold int}Dealership {DealershipID int, (primary key)SalesTax decimal}so you may have many delearships selling cars the same month, and youwanted a report to sum up totals of all dealerships per month.select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',sum(cs.NumberCarsSold) * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDMy question is, is there a way to achieve something like this:select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',TotalCarsSoldInMonth * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDNotice the only difference is the 3rd column in the select. Myparticular query is performing some crazy math and the only way I knowof how to get it to work is to copy and past the logic which isgetting out way out of hand...Thanks,Dave

View 5 Replies View Related

Select * From Table Is Processed Much Faster Than Select MyField From Table ¿?¿?

Oct 1, 2007



I have a query that has the following structure

Select *
From Table
Where Condition And ... (some 'Exists' conditions)

When I run the query using field names the query gets much slower, and I cannot understand Why!


Select MyField
From Table
Where Condition And ... (some 'Exists' conditions)


I'm talking about three times slower using the Select MyField sintax.

Any ideas???

View 8 Replies View Related

SELECT Column Aliases: Refer To Alias In Another Column?

Apr 9, 2008

Using SQL Server 2000.  How can I refer to one alias in another column?E.g., (this a contrived example but you get the idea)SELECT time, distance, (distance / time) AS speed, (speed / time) AS acceleration FROM dataNote how the speed alias is used in the definition of acceleration alias but this doesn't seem to work.

View 11 Replies View Related

SELECT Column Aliases: Refer To Alias In Another Column?

Apr 10, 2008

Using SQL Server 2000. How can I refer to one alias in another column?

E.g., (this a contrived example but you get the idea)

SELECT time, distance, (distance / time) AS speed, (speed / time) AS acceleration FROM data

Note how the "speed" alias is used in the definition of "acceleration" alias but this doesn't work.

View 14 Replies View Related

Using Column Number Inplace Of Column Name In SQL Select Statement

Jul 20, 2005

Hello All,Is there a way to run sql select statements with column numbers inplace of column names in SQLServer.Current SQL ==> select AddressId,Name,City from AddressIs this possible ==> select 1,2,5 from AddressThanks in Advance,-Sandeep

View 1 Replies View Related

A Table/column To Table/column Data Check (was Help Please, SQL Something Simple)

Sep 15, 2006

Hi all, I am not over familiar with SQL, I am a VB programmer, simply I need to achieve the following within Enterprise Manager.

I have 2 tables, different designs, different number of rows, I simply need to check whether the contents of a column in the first table is in a column in the second table, just simply a table/column to table/column data check for the same data content.

Easy Peasy for you guys, any help would be appreciated.

View 6 Replies View Related

Transact SQL :: Select Row With Max (column Value) Group By Another Column

May 19, 2015

i dont't know how to select row with max column value group by another column. I have T-SQL

CREATE PROC GET_USER AS
BEGIN
SELECT T.USER_ID ,MAX(T.START_DATE) AS [Max First Start Date] ,
MAX(T.[Second Start Date]) AS [Max Second Start Date],
T.PC_GRADE,T.FULL_NAME,T.COST_CENTER,T.TYPE_PERSON_NAME,T.TRANSACTION_NAME,T.DEPARTMENT_NAME ,T.BU_NAME,T.BRANCH_NAME,T.POSITION_NAME
FROM (

[code]....

View 3 Replies View Related

How To Create Key Time Column And Key Column For A Case Table And A Nested Table For Time Series Algorithm?

Jun 18, 2007

Hi, all experts here,



Thanks for your kind attention.



I want to use time series algorithm to mine data from my case table and nested table. Case table is Date table, while nested table is the fact table. E.g, I want to predict the monthly sales amount for different region (I have region table related to the fact table), how can I achieve this?

Thanks a lot and I hope it is clear for your help and I am looking forward to hearing from you shortly.

With best regards,

Yours sincerely,



View 6 Replies View Related

Questions On Key Column In Case Table And Key Time Column In Nested Table Using Time Series Algorithm

Jun 4, 2007

Hi, all experts here,



Thank you very much for your kind attention.



I am confused on key column of case table and key time column of nested table by using Time Series algorithm.

In my case, the case table structure is as below:

Territory key text (the ID is actually dimrisk_key, in this case, I use the name column binding to combine the Territory column of case table Dimrisks),

While the nested table structure is as below:

Cal_month key time (in this case, actually the ID is dimdate_key, again, I used name column bining property to bind the Cal_month to the ID)

So my question is, as the key column of case table has been set to be Territory, as a result, does the model training still cover all the cases (rows) based on the ID of the table?

Also, in the nested table, as the key time column has been set to Cal_month rather than Dimdate_key of the nested table, as a result, would the single series based on the cal_month?



Hope it is clear for your advices and help.

And I am looking forward to hearing from you shortly.



With best regards,



Yours sincerely,





View 1 Replies View Related

DB Engine :: Unable To Select Data From A Table Even After Providing Select Access

Aug 28, 2015

I am unable to the access on table even after providing the SELECT permission on table.

Used Query by me :

Here Test is schema ; Card is table ; User is Satish

To grant select on Table

GRANT SELECT ON TEST.Card  TO satish
Even after this it is not working, So provided select on schema also.
used query : GRANT SELECT ON SCHEMA::TEST  TO Satish.

View 8 Replies View Related

Default Table Owner Using CREATE TABLE, INSERT, SELECT && DROP TABLE

Nov 21, 2006

For reasons that are not relevant (though I explain them below *), Iwant, for all my users whatever privelige level, an SP which createsand inserts into a temporary table and then another SP which reads anddrops the same temporary table.My users are not able to create dbo tables (eg dbo.tblTest), but arepermitted to create tables under their own user (eg MyUser.tblTest). Ihave found that I can achieve my aim by using code like this . . .SET @SQL = 'CREATE TABLE ' + @MyUserName + '.' + 'tblTest(tstIDDATETIME)'EXEC (@SQL)SET @SQL = 'INSERT INTO ' + @MyUserName + '.' + 'tblTest(tstID) VALUES(GETDATE())'EXEC (@SQL)This becomes exceptionally cumbersome for the complex INSERT & SELECTcode. I'm looking for a simpler way.Simplified down, I am looking for something like this . . .CREATE PROCEDURE dbo.TestInsert ASCREATE TABLE tblTest(tstID DATETIME)INSERT INTO tblTest(tstID) VALUES(GETDATE())GOCREATE PROCEDURE dbo.TestSelect ASSELECT * FROM tblTestDROP TABLE tblTestIn the above example, if the SPs are owned by dbo (as above), CREATETABLE & DROP TABLE use MyUser.tblTest while INSERT & SELECT usedbo.tblTest.If the SPs are owned by the user (eg MyUser.TestInsert), it workscorrectly (MyUser.tblTest is used throughout) but I would have to havea pair of SPs for each user.* I have MS Access ADP front end linked to a SQL Server database. Forreports with complex datasets, it times out. Therefore it suit mypurposes to create a temporary table first and then to open the reportbased on that temporary table.

View 6 Replies View Related

How To: Create A SELECT To Select Records From A Table Based On The First Letter.......

Aug 16, 2007

Dear All
I need to cerate a SP that SELECTS all the records from a table WHERE the first letter of each records starts with 'A' or 'B' or 'C' and so on. The letter is passed via a parameter from a aspx web page, I was wondering that someone can help me in the what TSQL to use I am not looking for a solution just a poin in the right direction. Can you help.
 
Thanks Ross

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved