Select Query For Column
Mar 13, 2008
i have one table called Healthmanagement
in that i have column HealthTitles in that there r so many rows..few of them r here:
HealthTitles
---------------------------------
Lung Health
Lung Health: General
Lung Health: Asperic Detailed Modified
Diseases
Diseases: in one generation
Attacks
Attacks: Health Related
i want in ouput all rows but which r with ':' i want after that part only and if the rows r without ':' then remain as it is:
so i want
HealthTitles
---------------------------------
Lung Health
General
Asperic Detailed Modified
Diseases
in one generation
Attacks
Health Related
how can i get that?
thanks for any help.
View 4 Replies
ADVERTISEMENT
Feb 8, 2008
Not sure if this is possible, but maybe. I have a table that contains a bunch of logs.
I'm doing something like SELECT * FROM LOGS. The primary key in this table is LogID.
I have another table that contains error messages. Each LogID could have multiple error messages associated with it. To get the error messages.
When I perform my first select query listed above, I would like one of the columns to be populated with ALL the error messages for that particular LogID (SELECT * FROM ERRORS WHERE LogID = MyLogID).
Any thoughts as to how I could accomplish such a daring feat?
View 9 Replies
View Related
May 9, 2015
I have a column colC in a table myTable that has a value (e.g. '0X'). The position of a non-zero character in column colC refers to the ordinal position of another column in the table myTable (in the aforementioned example, colB).
To get a column name (i.e., colA or colB) from table myTable, I can join ("ON cte.pos = cn.ORDINAL_POSITION") to INFORMATION_SCHEMA.COLUMNS for that table catalog, schema and name. But I want to show the value of what is in that column (e.g., 'ABC'), not just the name. Hoping for:
COLUMN_NAME Value
----------- -----
colB 123
colA XYZ
I've tried dynamic SQL to no success, probably not executing the concept correctly...
Below is what I have:
CREATE TABLE myTable (colA VARCHAR(3), colB VARCHAR(3), colC VARCHAR(3))
INSERT INTO myTable (colA, colB, colC) VALUES ('ABC', '123', '0X')
INSERT INTO myTable (colA, colB, colC) VALUES ('XYZ', '789', 'X0')
;WITH cte AS
(
SELECT CAST(PATINDEX('%[^0]%', colC) AS SMALLINT) pos, STUFF(colC, 1, PATINDEX('%[^0]%', colC), '') colC
[Code] ....
View 4 Replies
View Related
Jul 10, 2007
Hi, all.
I want to Select query with incremental column on the fly.
For example
Use pubs
GO
select * from jobs where job_desc like '%e%' Order by max_lvl
returns
job_idjob_descmin_lvlmax_lvl
1New Hire - Job not specified1010
12Editor25100
13Sales Representative25100
...
I want to add here Rank Column numbering in order
select RankOnTheFly, * from jobs where job_desc like '%e%' Order by max_lvl
Then result will be..
Rankjob_idjob_descmin_lvlmax_lvl
11New Hire - Job not specified1010
212Editor25100
313Sales Representative25100
..
I can get the result using cursor and looping throught and inserting or Using Identity function.
But, I saw before there is just one simple Select query doing that.
Does anyone know this?
Thank you..
View 12 Replies
View Related
Mar 18, 2015
Suppose I have added a xyz bit column in mytable. From now onwards new values inserted in mytable will have 0 or 1 in xyz column but the values that were previously stored will have NULL value in xyz column.
Now I want to write a query in which I will not give xyz parameter always like it can be null or value.
select * from mytable
where class='something'
and xyz is null
or
select * from mytable
where class='something'
and xyz = 1
Now how to write same query for both cases.
View 9 Replies
View Related
Aug 8, 2013
Outer query: select op.const_cd, (select const_hin from constituency c where c.const_cd=op.const_cd) from PollingStation op, constituency c
where op.const_cd=c.const_cd
group by op.const_cd
order by op.const_cd
Result is:
122 a 205
123 b 205
124 c 235
125 d 191
126 e 226
127 f 159
128 g 165
129 h 175
130 i 225
131 j 213
Inner Query result of: select const_cd, count(polling_cd) from PollingStation p where right(polling_cd,1)='A' group by p.const_cd order by p.const_cd:
122 4
123 4
124 2
125 3
126 1
127 6
128 11
129 9
130 2
I want this output:
const_cd const_name count inner query
122 a 205 4
123 b 205 4
124 c 235 2
125 d 191 3
126 e 226 1
127 f 159 6
128 g 165 11
129 h 175 9
130 i 225 2
131 j 213
View 8 Replies
View Related
Mar 5, 2006
Supose I have the following select:
Select Name, Age, (select TelNums from Telephone)
From Person
The problem is that (select TelNums from Telephone) can return more than 1 record:
tel1
tel2
.
.
.
I was wondering how I can make a select to return the tel numbers like: 'tel1,tel2,tel2'
»»» Ken.A
View 3 Replies
View Related
Dec 19, 2006
I am using SQL2005 and ASP.NET 2.0
I have one column in database called DateTime and it is defined like type datetime.It is formated like: day.month.year hour:minutes:seconds
My question is: I want to get date from Column DateTime in format day.month.year in SELECT query, not in stored procedure.
thanks
View 3 Replies
View Related
Nov 18, 2013
I have a requirement like below .
Input table will be like below:
eventdata:
accountID deviceID timestamp speedKPH address
--------- -------- ---------- -------- -------------
preva1 bolero 1359089006 15 Ullalu Road
preva1 bolero 1359088796 0 Ullalu Road
preva1 bolero 1359088886 0 Ullalu Road
preva1 bolero 1359088888 8.47 Ullalu Road
preva1 bolero 1359088986 0 Ullalu Road
preva1 bolero 1359088988 45 Ullalu Road
preva1 bolero 1359088996 21 Ullalu Road
preva1 bolero 1359088998 0 Ullalu Road
preva1 bolero 1359089006 15 Ullalu Road
preva1 bolero 1359089009 12 Ullalu Road
preva1 bolero 1359089006 15 Ullalu Road
preva1 bolero 1359089016 0 Ullalu Road
preva1 bolero 1359089026 0 Ullalu Road
So here i need output table like below:
stoppagedetails:
accountID deviceID from_timestamp to_timestamp diff
--------- -------- ---------- -------- -------------
preva1 bolero 1359088796 1359088888 92
preva1 bolero 1359088986 1359088988 2
preva1 bolero 1359088998 1359089006 8
preva1 bolero 1359089016
How to write mysql query for the above requirement.
View 3 Replies
View Related
Aug 17, 2005
Hi there,
I¡¦ve got a table with the following as well as other info:
User ID
DirectoryTypeID (int)
Region ID (int)
I need to run a query where I could get the region ID, then, in the second column, I¡¦d get all distinct directory types within that region. For example, if I run the query:
subRegionAreaID directoryTypeID
--------------- ---------------
3 1
3 2
3 3
3 9
If need these results to be:
subRegionAreaID directoryTypeID
--------------- ---------------
3 1, 2, 3, 9
Is this possible?
Many Thanks!! ļ
Grazi
View 1 Replies
View Related
Nov 24, 2015
I am using SQL select query to select MIN from column data but I have 12 columns and want to select MIN of all these 6 columns in one SQL select statement.
I have written as SELECT MIN(temp_sv,humidity_sv,SH1,SH2,SH3,SH4) from production but its not working... How to do this....
View 4 Replies
View Related
May 9, 2015
I have a column colC in a table myTable that has a value (e.g. '0X'). The position of a non-zero character in column colC refers to the ordinal position of another column in the table myTable (in the aforementioned example, colB).To get a column name (i.e., colA or colB) from table myTable, I can join ("ON cte.pos = cn.ORDINAL_POSITION") to INFORMATION_SCHEMA.COLUMNS for that table catalog, schema and name. But I want to show the value of what is in that column (e.g., 'ABC'), not just the name. Hoping for:
COLUMN_NAME Value
----------- -----
colB 123
colA XYZ
I've tried dynamic SQL to no success, probably not executing the concept correctly..Below is what I have:
CREATE TABLE myTable (colA VARCHAR(3), colB VARCHAR(3), colC VARCHAR(3))
INSERT INTO myTable (colA, colB, colC) VALUES ('ABC', '123', '0X')
INSERT INTO myTable (colA, colB, colC) VALUES ('XYZ', '789', 'X0')
;WITH cte AS
(
SELECT CAST(PATINDEX('%[^0]%', colC) AS SMALLINT) pos, STUFF(colC, 1, PATINDEX('%[^0]%', colC), '') colC
FROM myTable
[code]....
View 5 Replies
View Related
Feb 28, 2008
Hello,I have a (big) table which is not normalized, but for i need at themoment i thinkthat's no problem. Indeed, what i would like to do is to select thename field andthe note. The problem is that i want to display the note in 2different columns.the first columns will show the number (count) of time that a certainnote (e.g note=4)appears for a certain name and in the other column the same thing butfor a different note value.so each column noteX will display the number of time that the notewith the value X appears for each namefor example, to the following table:Name | note | job | city | id |----------------------------------------john | 4 | jb1 | hamb | 1 |john | 5 | jb2 | hamb | 2 |john | 5 | jb3 | hamb | 3 |john | 5 | jb4 | hamb | 4 |Mark | 4 | jb1 | mun | 5 |Mark | 4 | jb2 | mun | 6 |Mark | 4 | jb5 | mun | 7 |Mark | 5 | jb1 | mun | 8 |peter | 5 | jb3 | berl | 9 |peter | 5 | jb5 | berl | 10 |frank | 4 | jb6 | v.form | 11 |frank | 5 | jb3 | v.form | 12 |frank | 5 | jb2 | v.form | 13 |the result should be:Name | note5 | note4 |-------------------------john | 3 | 1 |Mark | 1 | 3 |peter | 2 | 0 |frank | 2 | 1 |How should be the right SQL command to show the data i want?Rui DiasJoin Bytes!Thanks a lot
View 5 Replies
View Related
Aug 7, 2007
Hello all. I hope someone can offer me some help. I'm trying to construct a SQL statement that will be run on a Dataset that I have. The trick is that there are many conditions that can apply. I'll describe my situation:
I have about 1700 records in a datatable titled "AISC_Shapes_Table" with 49 columns. What I would like to do is allow the user of my VB application to 'create' a custom query (i.e. advanced search). For now, I'll just discuss two columns; The Section Label titled "AISC_MANUAL_LABEL" and the Weight column "W". The data appears in the following manner:
(AISC_Shapes_Table)
AISC_MANUAL_LABEL W
W44x300 300
W42x200 200
(and so on)
WT22x150 150
WT21x100 100
(and so on)
MT12.5x12.4 12.4
MT12x10 10
(etc.)
I have a listbox which users can select MULTIPLE "Manual Labels" or shapes. They then select a property (W for weight, in this case) and a limitation (greater than a value, less than a value, or between two values). From all this, I create a custom Query string or filter to apply to my BindingSource.Filter method. However I have to use the % wildcard to deal with exceptions. If the user only wants W shapes, I use "...LIKE 'W%'" and "...NOT LIKE 'WT%" to be sure to select ONLY W shapes and no WT's. The problems arises, however, when the user wants multiple shapes in general. If I want to select all the "AISC_MANUAL_LABEL" values with W <= 40, I can't do it. An example of a statement I tried to use to select WT% Labels and MT% labels with weight (W)<=100 is:
Code SnippetSELECT AISC_MANUAL_LABEL, W
FROM AISC_Shape_Table
WHERE (W <= 100) AND ((AISC_MANUAL_LABEL LIKE 'MT%') AND (AISC_MANUAL_LABEL LIKE 'WT%'))
It returns a NULL value to me, which i know is NOT because no such values exist. So, I further investigated and tried to use a subquery seeing if IN, ANY, or ALL would work, but to no avail. Can anyone offer up any suggestions? I know that if I can get an example of ONE of them to work, then I'll easily be able to apply it to all of my cases. Otherwise, am I just going about this the hard way or is it even possible? Please, ANY suggestions will help. Thank you in advance.
Regards,
Steve G.
View 4 Replies
View Related
Jul 20, 2005
Example, suppose you have these 2 tables(NOTE: My example is totally different, but I'm simply trying to setupthe a simpler version, so excuse the bad design; not the point here)CarsSold {CarsSoldID int (primary key)MonthID intDealershipID intNumberCarsSold int}Dealership {DealershipID int, (primary key)SalesTax decimal}so you may have many delearships selling cars the same month, and youwanted a report to sum up totals of all dealerships per month.select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',sum(cs.NumberCarsSold) * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDMy question is, is there a way to achieve something like this:select cs.MonthID,sum(cs.NumberCarsSold) as 'TotalCarsSoldInMonth',TotalCarsSoldInMonth * d.SalesTax as 'TotalRevenue'from CarsSold csjoin Dealership d on d.DealershipID = cs.DealershipIDgroup by cs.MonthIDNotice the only difference is the 3rd column in the select. Myparticular query is performing some crazy math and the only way I knowof how to get it to work is to copy and past the logic which isgetting out way out of hand...Thanks,Dave
View 5 Replies
View Related
Apr 9, 2008
Using SQL Server 2000. How can I refer to one alias in another column?E.g., (this a contrived example but you get the idea)SELECT time, distance, (distance / time) AS speed, (speed / time) AS acceleration FROM dataNote how the speed alias is used in the definition of acceleration alias but this doesn't seem to work.
View 11 Replies
View Related
Apr 10, 2008
Using SQL Server 2000. How can I refer to one alias in another column?
E.g., (this a contrived example but you get the idea)
SELECT time, distance, (distance / time) AS speed, (speed / time) AS acceleration FROM data
Note how the "speed" alias is used in the definition of "acceleration" alias but this doesn't work.
View 14 Replies
View Related
Jul 20, 2005
Hello All,Is there a way to run sql select statements with column numbers inplace of column names in SQLServer.Current SQL ==> select AddressId,Name,City from AddressIs this possible ==> select 1,2,5 from AddressThanks in Advance,-Sandeep
View 1 Replies
View Related
Sep 6, 2006
Hi, not exactly too sure if this can be done but I have a need to run a query which will return a list of values from 1 column. Then I need to iterate this list to produce the resultset for return.
This is implemented as a stored procedure
declare @OwnerIdent varchar(7)
set @OwnerIdent='A12345B'
SELECT table1.val1 FROM table1 INNER JOIN table2
ON table1. Ident = table2.Ident
WHERE table2.Ident = @OwnerIdent
'Now for each result of the above I need to run the below query
SELECT Clients.Name , Clients.Address1 ,
Clients.BPhone, Clients.email
FROM Clients INNER JOIN Growers ON Clients.ClientKey = Growers.ClientKey
WHERE Growers.PIN = @newpin)
'@newpin being the result from first query
Any help appreciated
View 4 Replies
View Related
Jan 2, 2004
i need help to get the value of a column which is selected from a column of another table....
View 3 Replies
View Related
May 19, 2015
i dont't know how to select row with max column value group by another column. I have T-SQL
CREATE PROC GET_USER AS
BEGIN
SELECT T.USER_ID ,MAX(T.START_DATE) AS [Max First Start Date] ,
MAX(T.[Second Start Date]) AS [Max Second Start Date],
T.PC_GRADE,T.FULL_NAME,T.COST_CENTER,T.TYPE_PERSON_NAME,T.TRANSACTION_NAME,T.DEPARTMENT_NAME ,T.BU_NAME,T.BRANCH_NAME,T.POSITION_NAME
FROM (
[code]....
View 3 Replies
View Related
Jul 9, 2002
When I run simple select against my view in Query Analyzer, I get result set in one sort order. The sort order differs, when I BCP the same view. Using third technique i.e. Select Into, I have observed the sort order is again different in the resulting table. My question is what is the difference in mechanisim of query analyzer, bcp, and select into.
Thanks
View 1 Replies
View Related
Feb 17, 2004
I want to know how to select a Column without selecting a column name
View 6 Replies
View Related
Aug 22, 2006
have a table with students details in it, i want to select all the students who joined a class on a particular day and then i need another query to select all students who joined classes over the course of date range eg 03/12/2003 to 12/12/2003.
i have tried with the following query, i need help putting my queries together
select * from tblstudents where classID='1' and studentstartdate between ('03/12/2004') and ('03/12/2004')
when i run this query i get this message
Server: Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
the studentstartdate field is set as datetime 8 and the date looks like this in the table 03/12/2004 03:12:15
please help
mustfa
View 6 Replies
View Related
Jul 20, 2005
Hi,Suppose I have a table containing monthly sales figures from my shopbranches:Branch Month Sales-----------------------London Jan 5000London Feb 4500London Mar 5200Cardiff Jan 2900Cardiff Feb 4100Cardiff Mar 3500The question I am trying to ask is this: in which month did each branchachieve its highest sales? So I want a result set something like this:Branch Month----------------London MarCardiff FebI can do a "SELECT Branch, MAX(Sales) FROM MonthlySales GROUP BY Branch" totell me what the highest monthly sales figure was, but I just can't figureout how to write a query to tell me which month corresponded to MAX(Sales).Ideas anyone?Cheers,....Andy
View 5 Replies
View Related
Sep 27, 2006
For example,I have a table "authors" with a column "author_name",and it has three value "Anne Ringer,Ann Dull,Johnson White".Here I want to create a new table by using a select sentence,its columns come from the values of the column "author_name".
can you tell me how can I complete this with the SQL?
View 2 Replies
View Related
Aug 5, 2014
I have the following code.
SELECT _bvSerialMasterFull.SerialNumber, _bvSerialMasterFull.SNStockLink, _bvSerialMasterFull.SNDateLMove, _bvSerialMasterFull.CurrentLoc,
_bvSerialMasterFull.CurrentAccLink, _bvSerialMasterFull.StockCode, _bvSerialMasterFull.CurrentAccount, _bvSerialMasterFull.CurrentLocationDesc,
_bvSerialNumbersFull.SNTxDate, _bvSerialNumbersFull.SNTxReference, _bvSerialNumbersFull.SNTrCodeID, _bvSerialNumbersFull.SNTransType,
_bvSerialNumbersFull.SNWarehouseID, _bvSerialNumbersFull.TransAccount, _bvSerialNumbersFull.TransTypeDesc,
[code]...
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
View 2 Replies
View Related
Jun 26, 2015
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120))
insert into #temptable
SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10
--column name
declare @cname varchar(30)
[code]...
View 4 Replies
View Related
Jul 10, 2015
I have a query that performs a comparison between 2 different databases and returns the results of the comparison. It returns 2 columns. The 1st column is the value of the object being compared, and the 2nd column is a number representing any discrepancies.What I would like to do is use the results from this 1st query in the where clause of another separate query so that this 2nd query will only run for any primary values from the 1st query where a secondary value in the 1st query is not equal to zero.I was thinking of using an "IN" function in the 2nd query to pull data from the 1st column in the 1st query where the 2nd column in the 1st query != 0, but I'm having trouble ironing out the correct syntax, and conceptualizing this optimally.
While I would prefer to only return values from the 1st query where the comparison value != 0 in order to have a concise list to work with, I am having difficulty in that the comparison value is a mathematical calculation of 2 different tables in 2 different databases, and so far I've been forced to include it in the select criteria because the where clause does not accept it.Also, I am not a DBA by trade. I am a system administrator writing SQL code for reporting data from an application I support.
View 6 Replies
View Related
Sep 22, 2015
-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!!
-- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"
set nocount on
go
if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1
if object_id('tempdb.dbo
[code]....
This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?
View 2 Replies
View Related
Nov 15, 2007
do i need to nest a query in RS if i want a calculated column to be compared against a multi value variable? It looks like coding WHERE calcd name in (@variable) violates SQL syntax. My select looked like
SELECT ... ,CASE enddate WHEN null then 1 else 0 END calcd name
FROM...
WHERE ... and calcd name in (@variable)
View 1 Replies
View Related
Oct 15, 2007
Hello,
I hope someone can answer this, I'm not even sure where to start looking for documentation on this. The SQL query I'm referencing is included at the bottom of this post.
I have a query with 3 select statements joined together like tables. It works great, except for the fact that I need to declare a variable and make it a table within two of those 3. The example is below. You'll see that I have three select statements made into tables A, B, and C, and that table A has a variable @years, which is a table.
This works when I just run table A by itself, but when I execute the entire query, I get an error about the "declare" keyword, and then some other errors near the word "as" and the ")" character. These are some of those errors that I find pretty meaningless that just mean I've really thrown something off.
So, am I not allowed to declare a variable within these SELECT tables that I'm creating and joining?
Thanks in advance,
Andy
Select * from
(
declare @years table (years int);
insert into @years
select
CASE
WHEN month(getdate()) in (1) THEN year(getdate())-1
WHEN month(getdate()) in (2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12) THEN year(getdate())
END
select
u.fullname
, sum(tx.Dm_Time) LastMonthBillhours
, sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) lasmosbillingpercentage
from
Dm_TimeEntry tx
join
systemuserbase u
on
(tx.owninguser = u.systemuserid)
where
Month(tx.Dm_Date) = Month(getdate())-1
and
year(dm_date) = (select years from @years)
and tx.dm_billable = 1
group by u.fullname
) as A
left outer join
(select
u.FullName
, sum(tx.Dm_Time) Billhours
, ((sum(tx.Dm_Time))
/
((day(getdate()) * ((5.0)/(7.0))) * 8)) perc
from
Dm_TimeEntry tx
join
systemuserbase u
on
(tx.owninguser = u.systemuserid)
where
tx.Dm_Billable = '1'
and
month(tx.Dm_Date) = month(GetDate())
and
year(tx.Dm_Date) = year(GetDate())
group by u.fullname) as B
on
A.Fullname = B.Fullname
Left Outer Join
(
select
u.fullname
, sum(tx.Dm_Time) TwomosagoBillhours
, sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) twomosagobillingpercentage
from
Dm_TimeEntry tx
join
systemuserbase u
on
(tx.owninguser = u.systemuserid)
where
Month(tx.Dm_Date) = Month(getdate())-2
group by u.fullname
) as C
on
A.Fullname = C.Fullname
View 1 Replies
View Related
Aug 28, 2006
Is there a way to select a column number without knowing its name? For example I want to select column 3 of a file without knowing it is:
Select [column 3] FROM OPENROWSET ('MSDASQL', 'Driver={Microsoft Text Driver (*.txt; *.csv)};
DefaultDir=D:ReportsTest;','select * from Report.txt ')
View 5 Replies
View Related
