Hi all, I'm having a bit of an issue with this query. I'm not that familiar with MS SQL so please forgive me. I'm trying to select the bad email addresses in a table so I can remove them or correct them but I'm not getting any results that are helpfull. Bellow are some of the queries I've tried
select email from person where email != "*@*" returned all addresses plus null fields.
select email from person where email not like "%@%" (this didn't work at all)
And a few other that are similar Could somebody please kick me in the right direction.
"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression"..It is about a Stored Procedure, which not only should output the number of opportunities with status "Pending" or "Accepted" but also the name of the opportunities with these statuses. Following points:
1. The SELECT that outputs the names of the opportunities may in some cases return more than one value. I created then the CURSOR CUR_TEST.
2. The code should return the names of Opportunities, namely after "The opportunities are:" and these must be sent to the recipients of an email. How can I do this, so the Names of the Opportunities and the rest of the email can be sent by email?. I mean, the concatenation with SET or SELECT doesn't work. I get as email only the output of the last row of the SELECT with cursor CUR_TEST.
I have dumped html in a table and am looking to extract email addresses from it. Within the html, the email addresses are followed and preceded by blank spaces. I am playing around with the following code:
SELECT RIGHT(@email, LEN(@email) - CHARINDEX('@', @email)) as Domain
but have been unable to extract whole email addresses.
I am trying to insert a carriage return in the select statement after the web link where I had highlighted code in bold. When I insert a record into the table, I receive the email with the message body is in single line.I need the result to look like this in the message body:
ALTER TRIGGER [dbo].[SendNotification] ON [dbo].[TicketsHashtags] FOR INSERT AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from
Not sure if this is possible, but maybe. I have a table that contains a bunch of logs. I'm doing something like SELECT * FROM LOGS. The primary key in this table is LogID. I have another table that contains error messages. Each LogID could have multiple error messages associated with it. To get the error messages. When I perform my first select query listed above, I would like one of the columns to be populated with ALL the error messages for that particular LogID (SELECT * FROM ERRORS WHERE LogID = MyLogID). Any thoughts as to how I could accomplish such a daring feat?
Hi,I wanted to get the domain name from the email in a query..So if the email is Join Bytes!, I just to display hotmail.comThanks in advance for the help.AJ
I want to email the results of the query. The query output can be email either as the HTML body of the email to be sent or as a excel attachement.
I am wondering as to what would be the best way to achive this.
a) I could have a email client module in C# or VB.NET 2.0, which would fetch the query resultset and store it in a dataset. I format it as HTML body and send the email using System.NET. For excel, can use XSLT
Please suggest if there is any other approach that would be more suitable.
I need to create a "simple" sql query but have it formatted and then emailed to individuals. I am trying to convert over from Oracle but I am having a hard time getting the query to be formatted the way I want. Here is the select statement I tried to use with no luck with xp_sendmail:
SELECT ALARM ID, TIMESTAMP as TIME, CLASS, RESOURCE, P, L, F, ALARM_MESSAGE FROM ALARM_LOG WHERE ([TIMESTAMP] < GETDATE() - 1) ORDER BY [TIMESTAMP];
Here what the output should look like with the column headers underlined and then the column data (notice the column heading ALARM MESSAGE is on the next line before any data):
ALARM ID TIME CLASS RESOURCE P L F -------------------- ----------- ----- ---------------- - - - ALARM_MESSAGE ------------------------------------------------------------- B3_TEMP_ALM 02-02@11:21 ALARM BUILDING3_TEMP N G G BUILDING 3 TEMPERATURE ALARM, CALL SECURITY.
B5_TEMP_ALM 02-02@11:22 ALARM BUILDING5_TEMP N G G BUILDING 5 TEMPERATURE ALARM, CALL SECURITY.
How can I run the query and have it formatted and emailed out? What is the best way to accomplish this?
I need to trigger an email to user when a work order due date is approaching 1 day prior to the due date. Also I need to trigger when a user adds, delete, or modify work order to check on work order due.
Whats the best way to send a small query result using Send Email Task. I have log table not more then 50 rows with 3 columns I need to query this table and send email.
I tried using Exe SQL Task and in result set I tried to store in variable so that I can attached that variable as email source. I think query result I can't store in string variable like this. Any simple way?
I have a situation that I need to accomodate as follows:
Customer account table as a bit value as to whether to send an email
For each customer with a true value set I need to run a query against their products table to check whether the reorder value is less than current stock.
if the recordcount for this query is > 0 then I need to send the customer an email using the address in the customer file.
This process needs to be run once per week.
Can anybody offer advice, samples as to resolve this problem
I'm very new to SQL but I have figured out how to do my first query. Now I would like to automate it to send the query as an attachment to users automatically (scheduler/cron??). How would you go about this, I need step by step hints. I'm using SQL Query Analyzer ver 8.00.2039 to generate the query from CDR records. Is this even possible?
is it possible to use send mail task to send results of a query via email? if it can be sent then what would the result look like? will it be like excel type format or fixed length? or comma delimited?
Help with query: I currently cannot be alerted by SQL Mail so I would like to take the script that was generated by SQL server and using the store procedure sp_sqlsmtpmail to generate a email using smtp server to alert me. The store procedure does work. I would like to know if this is possible.
Thanks
Lystra
-- Script generated on 1/21/2005 10:04 AM -- By: MAMSIsa -- Server: (local)
IF (EXISTS (SELECT name FROM msdb.dbo.sysalerts WHERE name = N'Demo: Full tempdb')) ---- Delete the alert with the same name. EXECUTE msdb.dbo.sp_delete_alert @name = N'Demo: Full tempdb' BEGIN EXECUTE msdb.dbo.sp_add_alert @name = N'Demo: Full tempdb', @message_id = 9002, @severity = 0, @enabled = 1, @delay_between_responses = 10, @include_event_description_in = 5, @database_name = N'tempdb', @category_name = N'[Uncategorized]'
Then
Exec sp_sqlsmtpmail @vcTo = 'lwilliams@Huc.com', @vcBody ='Check out problem Immediataly.', @vcSubject ='DOCSITE01FDK - Full Tempdb Log'
Hi,I'm not sure if this is possible as i've googled everywhere, but i have aselect query that returns a customer record with their associated salesorders. I would like to automate a process which sends an email reminder toeach customer in the database, that has outstanding orders. This emailreminder should have the results of the query regarding their account.The table structure are as follows.---------------------Customer_tbl---------------------CustomerIDAccountNoNameEmailAddress---------------------Order_tbl---------------------OrderIDCustomerIDReferenceAmountDateOutstanding_flgCan anyone help?Sen.
How can I turn this query into an Email alert if one of the counts are GT 50. The Source are machines that I capture counts(Unprocessed_Cntr) from every 5 minutes and load to the Load_Time_Capture table. I also add a datetime to each capture(Unprocessed_Capture ).
If any individual source has a count > 50 or if the combined(ALL) GT 50 send an email to support person.
SELECT CASE GROUPING([Source]) WHEN 1 THEN 'ALL' ELSE [Source] END AS 'Input Source', avg([Unprocessed_Cntr]) as 'Average Queue Past 15 Min'
FROM Load_Time_Capture WHERE Unprocessed_Capture >= DateADD(mi, -15, Current_TimeStamp) GROUP BY [source] WITH ROLLUP
I’m running a data integrity procedure from an agent job that is a scheduled weekly maintenance task which emails the results of my query, and is working properly.
I would however like this to only receive the email it the query contains results, and not send it no records are found to prompt me to take action.
I have a report that gets sends out through a subscription and sometimes the report has multiple pages and all those pages appear within one email.Is it possible to set the subscription in such a way that an email is sent per page when the subscription executes.
Under IIS SMTP I can set bounced email redirect etc. how to do that with dbmail, the idea is I can get the list of bounced emails somewhere so I can create a report.
Hi, not exactly too sure if this can be done but I have a need to run a query which will return a list of values from 1 column. Then I need to iterate this list to produce the resultset for return. This is implemented as a stored procedure
declare @OwnerIdent varchar(7) set @OwnerIdent='A12345B'
SELECT table1.val1 FROM table1 INNER JOIN table2 ON table1. Ident = table2.Ident WHERE table2.Ident = @OwnerIdent
'Now for each result of the above I need to run the below query
SELECT Clients.Name , Clients.Address1 , Clients.BPhone, Clients.email FROM Clients INNER JOIN Growers ON Clients.ClientKey = Growers.ClientKey WHERE Growers.PIN = @newpin)
Is there a way to export query results to an excel fie and add that file as an attachment in the email? All this has to be done using SQL query and it needs to be automated. My coworker tried using Openrowset and BCP, but it is not working.
I need a query to pull the data from Sql server. my requirement is i need to pull the data from multiple columns, in that there are three email fields are there like email1, email2, email3. i need query to retreive the data from table first it search for email in the above 3 fields if any one of the fields contains the record the it display as Main mail id.
When I run simple select against my view in Query Analyzer, I get result set in one sort order. The sort order differs, when I BCP the same view. Using third technique i.e. Select Into, I have observed the sort order is again different in the resulting table. My question is what is the difference in mechanisim of query analyzer, bcp, and select into. Thanks
what I want to achieve is to load a text file that has email addreses from disk and using the email addresses in the text file look it up against the email addresses in the database table then once matched delete all the users in the table whose email address were in the text file.
I also want to update some users using a different text file.
have a table with students details in it, i want to select all the students who joined a class on a particular day and then i need another query to select all students who joined classes over the course of date range eg 03/12/2003 to 12/12/2003.
i have tried with the following query, i need help putting my queries together select * from tblstudents where classID='1' and studentstartdate between ('03/12/2004') and ('03/12/2004')
when i run this query i get this message
Server: Msg 242, Level 16, State 3, Line 1 The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
the studentstartdate field is set as datetime 8 and the date looks like this in the table 03/12/2004 03:12:15
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120)) insert into #temptable SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10 --column name declare @cname varchar(30)
I have a query that performs a comparison between 2 different databases and returns the results of the comparison. It returns 2 columns. The 1st column is the value of the object being compared, and the 2nd column is a number representing any discrepancies.What I would like to do is use the results from this 1st query in the where clause of another separate query so that this 2nd query will only run for any primary values from the 1st query where a secondary value in the 1st query is not equal to zero.I was thinking of using an "IN" function in the 2nd query to pull data from the 1st column in the 1st query where the 2nd column in the 1st query != 0, but I'm having trouble ironing out the correct syntax, and conceptualizing this optimally.
While I would prefer to only return values from the 1st query where the comparison value != 0 in order to have a concise list to work with, I am having difficulty in that the comparison value is a mathematical calculation of 2 different tables in 2 different databases, and so far I've been forced to include it in the select criteria because the where clause does not accept it.Also, I am not a DBA by trade. I am a system administrator writing SQL code for reporting data from an application I support.
