Select With Date Parameters
Oct 14, 2013i have 3 table
DECLARE @a1 table(
p1 int ,
date1 smalldatetime
)
Insert Into @a1
(p1,date1)
Values
[code]....
how i get resulting table
num_p1 num_p2 num_p3
1 3 5
ADVERTISEMENT
How To Use Convert Date Statement In CmdInsert.Parameters.Add(Date,SqlDbType.DateTime).Value = Date
Sep 21, 2006HiI am using SQL 2005, VB 2005I am trying to insert a record using parameters using the following code as per MotLey suggestion and it works finestring insertSQL; insertSQL = "INSERT INTO Issue(ProjectID, TypeofEntryID, PriorityID ,Title, Area) VALUES (@ProjectID, @TypeofEntryID, @PriorityID ,@Title, @Area)"; cmdInsert SqlCommand; cmdInsert=new SqlCommand(insertSQL,conn); cmdInsert.Parameters.Add("@ProjectID",SqlDbType.Varchar).Value=ProjectID.Text; My query is how to detail with dates my previous code wasinsertSQL += "convert(datetime,'" + DateTime.Now.ToString("dd/MM/yy") + "',3), '";I tried the code below but the record doesn't save?string date = DateTime.Now.ToString("dd/MM/yy"); insertSQL = "INSERT INTO WorkFlow(IssueID, TaskID, TaskDone, Date ,StaffID) VALUES (@IDIssue, @IDTask, @TaskDone, convert(DateTime,@Date,3),@IDStaff)"; cmdInsert.Parameters.Add("IDIssue", SqlDbType.Int).Value = IDIssue.ToString();cmdInsert.Parameters.Add("IDTask",SqlDbType.Int).Value = IDTask.Text;cmdInsert.Parameters.Add("TaskDone",SqlDbType.VarChar).Value = TaskDoneTxtbox.Text;cmdInsert.Parameters.Add("Date",SqlDbType.DateTime).Value = date;cmdInsert.Parameters.Add("IDStaff",SqlDbType.Int).Value = IDStaff.Text;Could someone point to me in the right direction?Thanks in advance
View 3 Replies View RelatedTurning Off Calendar Date Picker On Date Parameters
Oct 24, 2007Any way to disable the calendar datepicker show it does not even show up on the report?
View 2 Replies View Related(Select All) In Multi-select Enabled Drop Down Parameters Doesn't Work
Apr 29, 2008Hello all,
I have two mult-value parameters in my report. Both of them working with selecting one or more values. But, when I test using "(Select All)" values for both parameters , only one parameter works. The "available values" for these two parameters are both from the data set.
select distinct ProductType
from Product
order by ProductType
Any suggestion? thx
Remove 'All' From 'From Date' And 'To Date' Report Parameters
Mar 31, 2008Hi,
I'm using the following code (created by Report Designer) to populate the From and To data controls in my report;
WITH MEMBER [Measures].[ParameterCaption] AS '[Check Date].[Date].CURRENTMEMBER.MEMBER_CAPTION' MEMBER [Measures].[ParameterValue] AS '[Check Date].[Date].CURRENTMEMBER.UNIQUENAME' MEMBER [Measures].[ParameterLevel] AS '[Check Date].[Date].CURRENTMEMBER.LEVEL.ORDINAL' SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS , [Check Date].[Date].ALLMEMBERS ON ROWS FROM [MyCube]
The report parameters for From and To contain a first item of 'All' which I don't want. How can I remove this please?
Thanks.
(Select All) In Multi-select Enabled Drop Down Parameters
Feb 27, 2008There are several parameters on a report. One of the parameter is a multi-select enabled parameter and I suppressed the value "All" showing as one of the item in the drop down list, simply by filter out the [bha].[bha].CURRENTMEMBER.LEVEL.ORDINAL to 1, as "(Select All)" is pre-assigned to the drop list when multi-select is enabled and it is confusing to show "(Select All)" and "All" in the drop list. However I have another report which is linked to this report and the value which is required to pass to this report for this parameter is "All". Can I pass the "Select All" as a parameter from the other report? If so, how? Thanks.
View 1 Replies View RelatedSQL 2012 :: Use Date Trunc Or Date Function To Select Date Range For Month On Month View
Jul 29, 2015My goal is to select values from the same date range for a month on month view to compare values month over month. I've tried using the date trunc function but I'm not sure what the best way to attack this is. My thoughts are I need to somehow select first day of every month + interval 'x days' (but I don't know the syntax).In other words, I want to see
Select
Jan 1- 23rd
feb 1-23rd
march 1-23rd
april 1-23rd
,value
from
table
How To Select All Dates Upto Todays Date And Include The First Next Future Date
Jan 11, 2006hello
how can i select all dates upto todays date and include the first next future date in a given data base
say todays date was the 01/06/2006 (MM,DD,YYYY)
below is a mock data base
id date (MM,DD,YYYY)
1 01/02/2006
2 01/04/2006
3 01/06/2006
4 01/09/2006
5 01/20/2006
i want to select all dates equal or less that 01/06/2006 and include the first next future date .. and in this case it would be 01/09/2006
so the results would return
1 01/02/2006
2 01/04/2006
3 01/06/2006
4 01/09/2006
Transact SQL :: How To Select Rows From Table Where DATE Column Is Today's Date
Aug 31, 2015So my data column [EODPosting].[MatchDate] is defined as a DATE column. I am trying to SELECT from my table where [EODPosting].[MatchDate] is today's date.
SELECT*
FROM[dbo].[EODPosting]
WHERE[EODPosting].[MatchDate]=GETDATE()
Is this not working because GETDATE() is like a timestamp format? How can I get this to work to return those rows where [EODPosting].[MatchDate] is equal to today's date?
Date Format - Column Which Select First Day Of Given Month Of Converted Date
Oct 21, 2013Aim – Convert the following field ”[INSTALLATION_DATE]” date format from “20090709” Into this “2009-07-09” ,
Also create a new column called “BegMonth” which selects first day of the given month of the converted date column
The table is ;
SELECT
[FDMSAccountNo],
[INSTALLATION_DATE]
FROM [FDMS].[dbo].[stg_LMPAB501]
Results
FDMSAccountNoINSTALLATION_DATE
87800000088420030521
Required Results
FDMSAccountNoINSTALLATION_DATEBegMonth
8780000008842003-05-212003-05-01
Date Parameters
Mar 20, 2008See Code below -->> I need help with date parameters. I was told to pass in parameters for the meters date >>see underlined<<. I originally had specific years there but they do not want the years to be hard coded into the script. So I tried to replace with a parameter but need help. I have placed the years next to the parameters that were originally in the 'where' clause where the underline is.
SET NOCOUNT ON
DECLARE
@mtr_ageAdatetime, --<=1/1/94
@mtr_ageBdatetime, --<=1/1/07
@mtr_ageCdatetime; --<=1/1/07
set @mtr_ageA = (getdate()); (this should be a year not current date)
set @mtr_ageB =(getdate());
set @mtr_ageC =(getdate());
create table #aged_a
(
Entnovarchar (4),
Customer_Name varchar(100),
Loc_Nbrvarchar (10),
--Contract_Nbrvarchar (10),
Ref_Novarchar(20),
Meter_Novarchar(20),
Service_Areavarchar(10),
Pol_Subvarchar(10),
Kind_Codevarchar(10),
Mtr_Type varchar(10), --group a,b,c
Set_Datedatetime,
Mtr_Statusvarchar (1),
Meter_Locvarchar(20),
Addressvarchar(100),
Cityvarchar(30),
Statevarchar(2),
Zipvarchar(10)
)
Insert Into #aged_a
(Entno, Loc_Nbr, Meter_No, Service_Area, Pol_Sub, Kind_Code, Mtr_Type, Set_Date, Mtr_Status,
Meter_Loc, Address, City, State, Zip)
select
locn_entno,locn_locno, mplm_metno, locn_serv_area, locn_polsub_id, winv_subclass, winv_inv_type, mplm_set_date, mplm_meter_status,
ISNULL(mprl_rloc_desc,''), ISNULL(locn_addr, '') + ' ' + ISNULL(locn_addr2, ''), locn_city, locn_state,
locn_postal
FROM rs3_prod.dbo.MP_Location_Meter (NOLOCK)
INNER JOIN rs3_prod.dbo.WO_Inventory (NOLOCK)
ON mplm_entno = winv_entno
and mplm_metno = winv_invno
INNER JOIN rs3_prod.dbo.RS_Location (NOLOCK)
ON winv_entno = locn_entno
and winv_locno = locn_locno
Left outer join rs3_prod.dbo.MP_Read_Location (NOLOCK)
on mprl_rloc_code = mplm_rloc_code
WHERE (winv_inv_type = 'GROUP A' and mplm_set_date <=@mtr_ageA )
or (winv_inv_type = 'Group B'and mplm_set_date <=@mtr_ageB )
or (winv_inv_type ='Group C' and mplm_set_date <=@mtr_ageC )
From And Thru Date Parameters
Nov 5, 2007I'm using MDX to query a cube. I have two identical data sets:
WITH MEMBER [Measures].[ParameterCaption] AS '[Date Shipped].[Year-Month].CURRENTMEMBER.MEMBER_CAPTION' MEMBER [Measures].[ParameterValue] AS '[Date Shipped].[Year-Month].CURRENTMEMBER.UNIQUENAME' MEMBER [Measures].[ParameterLevel] AS '[Date Shipped].[Year-Month].CURRENTMEMBER.LEVEL.ORDINAL' SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS , [Date Shipped].[Year-Month].ALLMEMBERS ON ROWS FROM [Heidtman DW]
How do I get one to be the "From" date and the other to be the "Thru" date?
I'm passing the correct parameters ([Date Shipped].[Month].&[2006]&[4]&[12]) & ([Date Shipped].[Month].&[2007]&[4]&[11]) but I don't know how to tell the query to use them correctly.
Date Parameters
Nov 26, 2007hi all
I am having problems with parameters
WHERE (CONVERT(datetime, Ticket.CreatedDate) >= @StartDate) AND (CONVERT(datetime, Ticket.CreatedDate) <= @EndDate)
My Report Parameters are date/time
I am in Data view of Reporting Services.
If I run this in Preview it works ok but sometimes I need to run in data view - what is incorrect with this?
thanks
Dianne
Logparse Does Not Take Date Parameters
Jun 12, 2007Hi,
I follow MAK's instruction here: http://www.databasejournal.com/features/mssql/article.php/10894_3515886_1
The problem is that it works only on the local machine server 2k3 with sql 2k5 installed. I have 2 other boxes( 2k3 and 2k server) that need to extract the security log.
I manually ran the logparser.exe with the same sql parameter but it didn't work either. If I leave out the WHERE clause, it works fine. But then, it pulls entire log file.
It does not spit out any hint nor error.
Please help.
TIA,
Cal
Date Parameters - International
Jan 4, 2007hi all
We are a multi site / multi language company so do not want to hardcode the date format - these reports will be on intranet
Using MS Sql - Reporting Services 2005
RecvdDate field = yyyy-mm-dd - is how it is displayed.
I added a @startdate and an @enddate parameter and am using the
calendar - so a user picks off the calendar
I read up and saw this information:
Report properties set
'Language' setting to '=User!Language' to detect user
culture automatically
My regional settings are set to English (New Zealand)
but whatever I do I receive no data - (data is definately there eg when run without parameters) so it is obviously the parameter that is incorrect.
Can someone give me some advice on what else to check.
thanks
Creating Date From Parameters
Mar 21, 2007Hello all,
Hope that someone can help with this. I am trying to write an expression that will return a date using the two of the parameters on the report. I tried using CAST but VS will not allow that.
The parameters are..
Parameters!Month.Value
Parameters!Year.Value
There are going to be twelve columns on the report, each one representing a month out of the time frame selected. If the user were to select January 2007 the columns would then display --Jan 07, Dec 06, Nov 06 and so on.
Thanks so much for any help in this.
Date Parameters Issue.
May 8, 2008Hi,
I have start and end date parameters on my report. The requirement is to dynamically update the start and end date parameters of a report based on another parameter 'DateRangeSelect' selected as week, month and Year. Based on the value as week, month, the start and end dates will be for a week / for a month selected dynamically and stored in a dataset,
When Default values are set for the start and end dates as fields from the above dataset, the dates are populated first time correctly. But when I modify the criteria from week to month, the start and end dates are not refreshed. Instead the start and end dates remain the same as of the first selection, irrespective of my subsequent change in selections from week to Year. On the other hand, if I assign the dataset to the Available values, the dates are assigned properly after refreshing but now the problem is, the datepicker is not available for picking and changing the date.
So, just wondering how I can get both, ie., the date ranges refresh based on my selection of week or month and datepicker also intact for changing the dates. Thanks.
Problem With Date Parameters
Nov 14, 2006I have a problem in that I have a report that hooks into oracle that returns data between 2 specified dates. I have created the two parameters startdate and enddate.
The query runs nicely and returns the desired results in the Data view screen, however when I run the report in the Preview screen no results are returned and no error messages pop up. The query is below:
SELECT APK052_WARDSTAY.WARD, COUNT(APK052_WARDSTAY.X_CN) AS NUM_PATIENTS
FROM APK052_WARDSTAY, APK051_CONEPIS, APK050_HPROVSPELL
WHERE APK052_WARDSTAY.CEP_NO = APK051_CONEPIS.CEP_NO AND APK051_CONEPIS.HSP_NO = APK050_HPROVSPELL.HSP_NO AND
(APK052_WARDSTAY.WS_EDATE BETWEEN TO_DATE(:StartDate, 'DD/MM/YYYY') AND TO_DATE(:EndDate, 'DD/MM/YYYY')) AND
(APK050_HPROVSPELL.MI <> '2')
GROUP BY APK052_WARDSTAY.WARD
As a bit of a test in the preview screen I spit out the value of the parameter fields and I notice that the date value are switched to the us format. Not sure if this has anything to with the problem or not.
Can someone please help / advise.
Thanks
Matt
Date Parameters In Subscriptions
Aug 28, 2007I have a standard on-demand report that now also needs to be e-mailed to a group of clerks. No problem there as I have several subscriptions in place already, however, they want this subscription to report from the system date to three days in the past. I could clone the report and change the date range to @Startdate= GETDATE()-3 and @Enddate = GETDATE() but then I would have to manage multiple reports that return the same thing. Is there a method in the date parameter field in subscriptions that can achieve the same thing?
View 3 Replies View RelatedSelect A Date Minus Whatever Todays Date Is?
Feb 15, 2008At the moment i have a query that is dependent on a date which is 42 days before whatever the date may be today.
The statement in my query I have to use is:
MailDate <= '2008-01-05'
I am wondering if i could make that statement automatically take off 42 days from todays date?
Date Select Query - Select Between Two Dates
Aug 22, 2006have a table with students details in it, i want to select all the students who joined a class on a particular day and then i need another query to select all students who joined classes over the course of date range eg 03/12/2003 to 12/12/2003.
i have tried with the following query, i need help putting my queries together
select * from tblstudents where classID='1' and studentstartdate between ('03/12/2004') and ('03/12/2004')
when i run this query i get this message
Server: Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
the studentstartdate field is set as datetime 8 and the date looks like this in the table 03/12/2004 03:12:15
please help
mustfa
Retrieve Date Using Input Parameters W/o GUI
Feb 20, 2005HI
I want to retrieve data in between two date formats using a query in SQL?
can i do it w/o using GUI tools?
For Exp i have sales data from date 11/11/2000 to 11/2004.
now as a user i want to give Input paramete value ranging between 06/06/2002 and 07/07/2002?
Is there any SQL query which i can use to retrieve the above date values?
Thanx in Advance
VS
Set Date Parameters Within Stored Procedures?
Feb 15, 2012I need to set date parameters within Stored Procedures using a sql 2008 R2, with an access 2007 front end. The procedure needs to allow me to set parameters for a start date and an end date.
View 1 Replies View RelatedMS Reporting Services Date Parameters
Mar 26, 2008Hi,
Not sure if I will be able to get the answer I need on this forum but hopefully I will!
We have a previous report that uses the code:
AND T1."Decision_Date" BETWEEN '2005-07-01 00:00:00.000' AND '2006-06-30 00:00:00.000' AND T1."Decision_Type_Description"
With this the report was run with the "static" dates, the new report (in MS reporting services) requires that the user be able to enter in the start date range and the end date range.
I have come up with something like:
(T1."Decision_Date" = @Start_Year) AND (T1."Decision_Date" = @End_Year)
But not working. Can anyone assist?
Thanks,
jonathanr
Selected Date Parameters Not Working
Jun 2, 2007Hi all,
I'm looking to return certain rows from our db into an SSRS based on a user selected date range using the parameters calendar.
My query/analyzer returns all required fields/rows, but how do I
pull the specific rows, (that are based on a date range that the user enters),into the report? I've tried expressions, and vb functions to no avail. The users will be using the calendar parameter to select date ranges .So far the reports pull in all rows from my query.
Thanks,
Scott
Select Parameters With Dates
Jan 16, 2007I have a sqlDataSource control that has its select command and parameters set dynamically. One of the parameters is a date, which should be in smalldatetime format (ie, 12/22/2006). Obviously, using SQL Server, the data is stored with both date and time. The problem is, I cannot get any data selected. I initially thought that I needed to tell it to only look at the date and not the time, but from what I have seen this should work. Here is the pertinent code.
dim seldate as datetime
selDate = Session("ChosenDate")
Dim SelCmd As String = "SELECT [PatientName], [AssignedTo], [CPT], [CPT2], [HospitalID], [RoomNbr], [ACType], [TxDx1], [TxDx2], [MRNbr], [Notes], [PatientID], [PCPID], [ResidentID], [Status], [CaseID], [AdmitDate], [crtd_datetime] FROM [DailyBilling] WHERE ([crtd_datetime] = @crtd_datetime) and ([AssignedTo] = @AssignedTo) and ([HospitalID] = @HospitalID) ORDER BY [PatientName]"
SqlDataSource1.SelectCommand = SelCmd
SqlDataSource1.SelectParameters.Clear()
Dim parFilterProvider As New ControlParameter()
parFilterProvider.ControlID = "ddlProvider"
parFilterProvider.Name = "AssignedTo"
parFilterProvider.Type = TypeCode.String
SqlDataSource1.SelectParameters.Add(parFilterProvider)
Dim parFilterHospital As New ControlParameter()
parFilterHospital.ControlID = "ddlHospitals"
parFilterHospital.Name = "HospitalID"
parFilterHospital.Type = TypeCode.String
SqlDataSource1.SelectParameters.Add(parFilterHospital)
Dim parFilterStatus As New Parameter()
parFilterStatus.Name = "crtd_datetime"
parFilterStatus.DefaultValue = selDate.ToShortDateString
parFilterStatus.Type = TypeCode.DateTime
SqlDataSource1.SelectParameters.Add(parFilterStatus)
Gridview1.databind()
Any ideas?
Define Select Parameters
Apr 13, 2007Hi
I have a DropDownlist (Drop1) and a GridView,the GridView is bount to an SqlDataSource1 that has 2 Select parameters CatId and SourceId
The dropdownlist has a selectedvalue of the following format 15-10(2 numbers seperated by -).I want to set CatId to 15 and SourceId to 10
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:Art %>"
SelectCommand="Select * from Option Where SourceId=@SourceId And CatId=@CatId">
<SelectParameters>
<asp:ControlParameter ControlID="Drop1" Name="SourceId" />
<asp:ControlParameter ControlID="Drop1" Name="CatId" />
</SelectParameters>
</asp:SqlDataSource>
Can anyone help me to define the parameters?
thanks
Select Parameters With Gridview
Aug 2, 2007I have a form that has 4 fields to fill in. I have a button that can add these fields to a sql database. I also want to put a button next to the "add" button so you can fill out the same fields and search for those values. Here's what i have so far. I want to select based on the fields, but i'm having trouble with the syntax of the parameters. I also want to add something, so if nothing is filled out in one of those boxes, it retuns back all records for the default value.
string strConnection = ConfigurationManager.ConnectionStrings["TimeAccountingConnectionString"].ConnectionString;
SqlConnection myConnection = new SqlConnection(strConnection);
String selectCmd = "SELECT * FROM users WHERE firstname = @firstame or lastname = @lastname or office = @office or team = @team";
SqlDataAdapter myCommand = new SqlDataAdapter(selectCmd, myConnection);
myCommand.SelectCommand.Parameters.Add(new SqlParameter("@firstname", SqlDbType.VarChar, 50));
myCommand.SelectCommand.Parameters.Add("@firstname", txtFirstName.Text);
myCommand.Parameters.AddWithValue("@lastname", txtLastName.Text);
myCommand.Parameters.AddWithValue("@team", dwnTeam.Text);
myCommand.Parameters.AddWithValue("@office", dwnOffice.Text);
DataSet ds = new DataSet();
myCommand.Fill(ds, "users");
MyDataGrid.DataSource = ds.Tables["users"].DefaultView;
MyDataGrid.DataBind();
Odbc Select Where Parameters
Jan 6, 2004Im enabling an apllication to use ODBC to connect to sqlserver which currently uses Oracle OCI, i have no prior knowledge about odbc use.
Im unsure how to approach where clause parameters (bind parameters)
ie Oracle OCI
select name into :name from emp where name = :a_name
via ODBC, connecting to sql server i'm attempting
select name from emp where name = ?
with,
sqlprepare
sqlbindparameter
sqlexecute
sqlbindcol
sqlfetch
all seems ok with sqlbindparameter, but sqlexecute fails with sqlstate 22001, String data, right truncation.
The question: can i use ? parameter in where conditions, if not whats the best approach.
Many Thanks.
Remove All And Keep Select All From Parameters
Jan 19, 2007I know that when you select Multi from the parameter report properties, that it automatically makes "Select All" Available. So how would i take off the "All Value". My users dont want to see All, if Select ALL is available.
How do i exclude from "All" from my report parameter/dataset??
SSRS Parameters : Select All
Mar 12, 2007In multivalue parameters by default an option "All" was appearing. You can select both "All" and any of the individual parameters. However the latest report I created suddenly appeared with "(Select All)" as well as "All". (Select All) actually selects (or deselects) all items.
Does anyone know where (Select All) came from, is this a new thing in SP2? How do you control it.
Also, is there a functionality where you can select "All", but if you then select another paramater it automatically deselects "All"?
Richard
Problem With SqlDataSource Using Sub-query And Date As Parameters
Dec 13, 2007I am creating a search page for master detail tables. The search criteria is mainly on the header table. However, there is also one criteria which is in detail table, let said product number.In my SqlDataSource, I setup the SQL like this.select fieldA, fieldB, ..., fieldZ from masterTable where (1 = 1)Then, the additional search criteria is appended to the SqlDataSource select command once the user click the search button. If user wants to search product number, the following will be appendedand exists (select 1 from detailTable where pid = masterTable.id and productNo = @productNo)The problem is when I provides both the sub-query criteria and 2 date fields criteria. The page will raise an timeout exception. I don't have any clue on this as I can copy the SQL and run it inside the SQL Server Management Studio. The result come up in a second.Any suggestion on tackling this problem? Thanks!
View 4 Replies View RelatedReporting Services :: Date Range Parameters Are Off By One Day?
Apr 21, 2015I have a Start Date and End Date parameter in my SSRS report. The results are off by 1 day. For example if I enter 4/2/2015 and 4/20/2015 it will return a few results from 4/1/2015 to 4/19/2015.
View 4 Replies View Related