CREATE PROCEDURE {databaseOwner}{objectQualifier} [PreciseData_IssueTracker_GetAllIssues]@moduleId intASSELECT PreciseData_IssueTracker_Issue.id AS 'issueId',PreciseData_IssueTracker_Status.name AS 'statusName',PreciseData_IssueTracker_Issue.subject AS 'subject',PreciseData_IssueTracker_Type.name AS 'typeName',Users.Username AS 'assignedUserName',Users.Username AS 'raiserUserName',PreciseData_IssueTracker_Issue.raiseDate AS 'raiseDate'FROMPreciseData_IssueTracker_Issue INNER JOIN PreciseData_IssueTracker_Status ON PreciseData_IssueTracker_Issue.statusId=PreciseData_IssueTracker_Status.idINNER JOIN PreciseData_IssueTracker_Type ON PreciseData_IssueTracker_Issue.typeId=PreciseData_IssueTracker_Type.idINNER JOIN Users ON Users.UserID=PreciseData_IssueTracker_Issue.assignedUserIdINNER JOIN Users ON Users.UserID=PreciseData_IssueTracker_Issue.raiserUserIdWHERE PreciseData_IssueTracker_Issue.moduleId=@moduleIdORDER BY PreciseData_IssueTracker_Issue.raiseDate DESCGOHow do i make it work?
We have a stock code table with a description field and a brand field - when the data was entered, some of the records were entered with the brand field in the description field.
ie. Code Description Brand ABC1 BLANK DVD SONY ABC2 SONY BLANK DVD SONY
what I need to do is identify where the Brand is in the Description field ...
With this query: SELECT Table1.1ID, Table1.Field1, Table2.2ID, Table2.Field1, Table3.3ID, Table3.Field1, sum(Table1.Field1), sum(Table2.Field1), sum(Table3.Field1) FROM Table1 INNER JOIN Table2 ON Table1.1ID = Table2.2ID INNER JOIN Table3 ON Table2.2ID = Table3.3ID
I get this error: Column 'fieldname' is invalid in the select list because it is not contained in an aggregate function and there is no GROUP BY clause.
Is it because you can't do what I'm trying above or am I missing something?
I have FeaturedClassifiedsCount field, which I would like to update each time record is selected. How do I do it in stored procedure on SQL 2005? This is my existing code:alter PROCEDURE dbo.SP_FeaturedClassifieds @PageIndex INT, @NumRows INT, @FeaturedClassifiedsCount INT OUTPUT
AS BEGIN select @FeaturedClassifiedsCount = (Select Count(*) From classifieds_Ads Where AdStatus=100 And Adlevel=50 ) Declare @startRowIndex INT; Set @startRowIndex = (@PageIndex * @NumRows) + 1;
With FeaturedClassifieds as (Select ROW_NUMBER() OVER (Order By FeaturedDisplayedCount * (1-(Weight-1)/100) ASC) as Row, Id, PreviewImageId, Title, DateCreated, FeaturedDisplayedCountFrom classifieds_Ads WhereAdStatus=100 And AdLevel=50 )
SelectId, PreviewImageId, Title, DateCreated, FeaturedDisplayedCount From FeaturedClassifieds Where Row between@startRowIndex And @startRowIndex+@NumRows-1
I need to do a SQL query based on the two biggest values of a field. PLS , what s the SQL syntax : select * from Table where PRICE ......Ex: if the values of the field PRICE are : 50, 40, 100, 30 and 150.The request should select the rows that have Price equal 100 or 120Thanks a lot for help
This is feeling very hard for me, but is surely very easy for many of you. I have 2 Tables. "Events" and "Meals". Both have a columns named "EventDate" and "EventTime". I need to be able to compile a list of both and sort by event date and time. For example, a Meal @ 5:30 would place itself between a 4:00 Event, and a 6:30 Event.
i have a table, that i am trying to compare values. I want to highlight the cheapest field's contents (price) for each tuple. The field itself could be different for each field depending on its price. the table i have is below;
im not sure if this would be a good format for the table, i cant figure out how to find out which field is the lowest value and how at all i would be able to make the value itself bold or stand out somehow.
This is a simple one, and I know that it has to be fairly common, but I just can't figure out an elegant way to do it. I have a table with the following fields: OrderID (FK, not unique) InstallationDate (Datetime) CreateDtTm (Datetime)
There is no PK or Unique ID on this table, though an combo of OrderID and CreateDtTm would ostensibly be a unique identifier.
For each OrderID, I need to pull the InstallationDate that was created most recently (based on CreateDtTm). Here's what I've got so far, and it works, but man is it ugly:
SELECT a.OrderID, InstallationDate
FROM ScheduleDateLog a
INNER JOIN
(SELECT OrderID, max(convert(varchar(10),CreateDtTm,102)+'||' +convert(varchar(10), InstallationDate,102)) as TopRecord
FROM ScheduleDateLog GROUP BY OrderID) as b
ON convert(varchar(10),CreateDtTm,102)+'||' +convert(varchar(10), InstallationDate,102)=b.TopRecord
I have a very large CSV file containing name-and-address information which I am reading in a Visual Basic project using the Microsoft.JetOLEDB.4.0 provider.
The key field on which the CSV file is to be filtered is the PostCode field. This is a UK-format PostCode "XXnn Nxx" where "XX" is one or more letters denoting a geographical area within the UK and "nn" is one or more characters (starting with at least one numeric digit) which when combined with the area code denotes a specific district within the geographical area. My aim is to identify all the unique UK postal districts held within my address CSV file.
Because I do not know how to use SQL to filter on the partial contents of a database field I am presently reduced to extracting unique full PostCodes using "SELECT DISTINCT PostCode,City,County FROM [ADDRESSES.csv]" into a DataTable object, then sequentially reading that DataTable using the operation of a dictionary object to identify unique PostCode areas, to finally construct the DataTable I need.
Is it possible in SQL to select records where the value of a varying number of characters before a space character in a given (PostCode) field is unique?
I have a problem selecting maximum values inside a data flow, when the field is varchar. For example, I could have an incoming text file with following rows (the real life problem is a bit more complicated, but the idea is the same)
ID Desc 1 Car 1 Truck 1 Bicycle 2 Horse 2 Cow
Now I would like to group by ID, and have the maximum value from the Desc field, resulting
ID Desc 1 Truck 2 Horse
I tried to sort the data flow first with ID ascending and Desc descending, followed by sort with ID ascending and "Remove duplicate sort values" turned on. However, the sort does not seem to select the first Desc value it gets, because the result is.
ID Desc 1 Bicycle 2 Horse
If you have any hints, how to tackle this problem, please help!
Hi, I have one table (PermProportionalCosting) that contains employeecode, costcentre and proportionpercentage. An employee may have two or more records in this table, indicating that their salary has been split across multiple costcentres.
Another table (Employee) contains a default costcentre for each employee.
Another table (TransActualHistoricalMaster) contains the hours paid to each employee for each pay period.
My query so far selects all employees and the total hours worked from the TransMaster table, and then selects the costcentre and proportionpercentage from the PermProportionalCosting table. Multiple lines are created for all employees in the PermProportionalCosting table, with each line indicating the proportionpercentage and associated costcentre.
This is my query so far:
SELECT TransActualHistoricalMaster.EmployeeCode, Employee.PreferredName, Employee.LastName, CostCentre.Description, PermanentProportionalCosting.CostCentreCode,PermanentProportionalCosting.PercentageSplit, TransActualHistoricalMaster.OrdHours FROM TransActualHistoricalMaster INNER JOIN Employee ON TransActualHistoricalMaster.EmployeeCode = Employee.EmployeeCode INNER JOIN CostCentre ON Employee.CostCentreCode = CostCentre.CostCentreCode FULL OUTER JOIN PermanentProportionalCosting ON TransActualHistoricalMaster.EmployeeCode = PermanentProportionalCosting.EmployeeCode GROUP BY TransActualHistoricalMaster.EmployeeCode, Employee.PreferredName, Employee.LastName, CostCentre.Description, PermanentProportionalCosting.CostCentreCode, PermanentProportionalCosting.PercentageSplit, TransActualHistoricalMaster.OrdHours
This next bit is what I am unsure of.
I would like the CostCentre field from the Employee table to go into the PermanentProportionalCosting.CostCentreCode column where the employee doesn't have a record in the PermanentProportionalCosting table. In the above query, there is a null value for each employee that doesn't have a record in the PermanentProportionalCosting table, so I would like my query to replace the null value with the costcentre from the Employee table.
I've got a big problem that I'm trying to figure out: I have an address table out-of-which I am trying to select mailing addresses for companies UNLESS a mailing address doesn't exist; then I want to select the physical addresses for that company. If I get multiple mailing or physical addresses returned I only want the most recently edited out of those.
I don't need this for an individual ID select, I need it applied to every record from the table.
My address table has some columns that look like: [AddressID] [int] [LocationID] [int]
AddressID is a primary-key non-null column to the address table and the LocationID is a foreign key value from a seperate Companies table. So there will be multiple addresses to one LocationID, but each address will have it's own AddressID.
How can I do this efficiently with perfomance in mind???
A colleague of mine has a view that returns approx 100000 rows in about 60 seconds.
He wants to use the data returned from that view in an OLE DB Source component.
When he selects the view from the drop-down list of available tables then SSIS seems to hang without any data being returned (he waited for about 15 mins).
He then changed the OLE DB Source component to use a SQL statement and the SQL statement was: SELECT * FROM <viewname>
In this instance all the data was returned in approx 60 seconds (as expected).
This makes no sense. One would think that selecting a view from the drop-down and doing a SELECT *... from that view would be exactly the same. Evidently that isn't the case.
I'm using DTS to import data from an Access memo field into a SQL Server ntext field. DTS is only importing the first 255 characters of the memo field and truncating the rest.I'd appreciate any insights into what may be causing this problem, and what I can do about it.Thanks in advance for any help!
I need to pass in null/blank value in the date field or declare the field as string and convert date back to string.
I tried the 2nd option but I am having trouble converting the two digits of the recordset (rs_get_msp_info(2), 1, 2))) into a four digit yr. But it will only the yr in two digits. The mfg_start_date is delcared as a string variable
option 1 I will have to declare the mfg_start_date as date but I need to send in a blank value for this variable in the stored procedure. It won't accept a null or blank value.
I am trying to drag data from Informix to Sql Server. When I kick off the package using an OLE DB Source and a SQL Server Destination, I get DT_DBDATE to DT_DBTIMESTAMP errors on two fields from Informix which are date data ....no timestamp part
I tried a couple of things:
Created a view of the Informix table where I cast the date fields as datetime year to fraction(5), which failed.
Altered the view to convert the date fields to char(10) with the hopes that SQL Server would implicitly cast them as datetime but it failed.
Hi ,Have a Visual C++ app that use odbc to access sql server database.Doing a select to get value of binary field and bind a char to thatfield as follows , field in database in binary(16)char lpResourceID[32+1];rc = SQLBindCol(hstmt, 1, SQL_C_CHAR,&lpResourceID,RESOURCE_ID_LEN_PLUS_NULL , &nLen1);and this works fine , however trying to move codebase to UNICODE antested the followingWCHAR lpResourceID[32+1];rc = SQLBindCol(hstmt, 1, SQL_W_CHAR,&lpResourceID,RESOURCE_ID_LEN_PLUS_NULL , &nLen1);but only returns 1/2 the data .Any ideas , thoughts this would work fine , nit sure why loosing dataAll ideas welcome.JOhn
Hi,another problem I have is that have compounded fields in my sql table.Exampleproduct@customerI need a simple function to return "customer", so it should return the valueafter "@", unfortunate "@" will sometimes be character number 6, sometimescharacter number 7 etc.regardsJorgen
I have a very strange situation. I've increased the size of an NVARCHAR field from 8 to 9 in a database table. The format of the data that I enter will either be an 8 character field (123456-8) or a 9 character field (1234567-9). The '-' is critical.
It used to only accept the 8 character version, but after increasing the field size, if I try to insert the 9 character field version, it gets truncated after the '-', as though it's still only allowing 8 characters. But that only occurs when I include the '-' or other such characters like '#'. If I try to insert 1234567a9, it works. The following explains the outcomes:
I need create a field to store tax rate. I need only 2 decimal points. I defined the field as decimal, precision=5 and scale=2. Does it mean that it can hold value from 0.00 to 999.99?
I'm importing an Access database to SQL Server 2000. The issue I ran into is pretty frustrating... All Memo fields that get copied over (as Text fields) appear to be fine and visible in SQL Server Enterprise Manager... except when I display them on the web via ASP - everything is blank (no content at all).
I didn't have that problem with Access, so I ruled out the possibility that there's something wrong with the original data.
Is this some sort of an encoding problem that arose during database import? I would appreciate any pointers.
I have a table called BidItem which has another table calledBidAddendum related to it by foreign key. I have another table calledBidFolder which is related to both BidItem and BidAddendum, based on acolumn called RefId and one called Type, i.e. type 1 is a relationshipto BidItem and type 2 is a relationship to BidAddendum.Is there any way to specify a foreign key that will allow for thedifferent types indicating which table the relationship should existon? Or do I have to have two separate tables with identical columns(and remove the type column) ?? I would prefer not to have multipleidentical tables.
I am trying to populate a field in a SQL table based on the valuesreturned from using substring on a text field.Example:Field Name = RecNumField Value = 024071023The 7th and 8th character of this number is the year. I am able toget those digits by saying substring(recnum,7,2) and I get '02'. Nowwhat I need to do is determine if this is >= 50 then concatenate a'19' to the front of it or if it is less that '50' concatenate a '20'.This particular example should return '2002'. Then I want to take theresult of this and populate a field called TaxYear.Any help would be greatly apprecaietd.Mark
