Hi,
Can I assume that SQL Server 2000 will always give the result set of a simple query in the same order as the rows inserted into the table ?
Eg :
select *from test
// there is no order by statement Or TOP clause used. Just a simple select query.
Please advise,
Thanks,
MiraJ
Finding the "pieces of information" I need to successfully install the SQL Server Express edition is so complex. Uninstalls do "not" really uninstall completely, leading to failure of SQL install. Can you suggest a thorough, one-stop site for directions for the order of app uninstalls and then the order for app installs for the following...
SQL Server Express edition
Visual Studios 2005
Jet 4.0 newest upgrade
.Net Framework 2.0 (or should I use 3.0)
VS2005 Security upgrade
Anything else I need for just creating a database for my VS2005 Visual Basic project?
I was trying to use MS Access as my backend db but would like to try SQL Express
Thank you, Mark
In SQL sERVER 2008, I have two fields - Depatment and Employees. I need to sort the result set by employee number ascending order, with following exception
1)when department number = 50 - the preferred order is Employee # - 573 followed by 551-572 (employee # belong to Dept 50 = 551-573)
2)When Department number = 20 – the preferred sort order is Employee # 213-220, followed by Employee # 201-213 (employee # belong to Dept 20 = 201-220)
How shall I achieve this?
I never paid much attention to this before but I noticed this today in a new table I was creating.
For tables defined in the tabular model the table properties have something like SELECT Blah FROM TableName ORDER BY Blah Then in the tabular model the table's data is in the same order it was ordered by in the data source for the table.
I have a date table I setup and I noticed it is NOT respecting the sort order.
I have it sorted by DateID which sorts with the oldest date first and newest date as last row.However, the table that is imported and stored in the data model is not in that order.
I can of course manually sort the rows in BIDS/DataTools, but I find this discrepancy odd.
Would this have negative impacts on the EARLIER function for example if the data rows are not in the order specified?
I have a query that calculate the total amount of order details based on a particular order:
Select a.OrderID,SUM(UnitPrice*Quantity-Discount)
From [Order Details]
Inner Join Orders a
On a.OrderID=[Order Details].OrderID
Group by a.OrderID
My question is what if I wanted to create a formula to something like:
UnitPrice * Quantity - DiscountAmount Where DiscountAmount = UnitPrice Quantity * Discount
Do I need to create a function for that? Also is it possible to have m y query as a table variable?
Hi!
I recently run into a senario when a procedure quiered a table without a order by clause. Luckily it retrived data in the prefered order.
The table returns the data in the same order in SQL Manager "Open Table"
So I started to wonder what deterimins the sort order when there is no order by clause ?
I researched this for a bit but found no straight answers. My table has no PK, but an identiy column.
Peace.
/P
Hey guys, i need to find out how can i add order items under a Purchase Order number.
My table relationship is PurchaseOrder ->PurchaseOrderItem.
below is a Stored Procedure that i have wrote in creating a PO:
CREATE PROC spCreatePO (@SupplierID SmallInt, @date datetime, @POno SmallInt OUTPUT)
AS
BEGIN
INSERT INTO PurchaseOrder (PurchaseOrderDate, SupplierID) VALUES(@date, @SupplierID)
END
SET @POno = @@IDENTITY
RETURN
However, how do i make it that it will automatically adds item under the POno being gernerated? can i use a trigger so that whenever a Insert for PO is success, it automaticallys proceed to adding the items into the table PurcahseOrderItem?
CREATE TRIGGER trgInsertPOItem
ON PurchaseOrderItem
FOR INSERT
AS
BEGIN
'What do i entered???'
END
RETURN
help is needed asap! thanks!
hi basically what i have is 3 text boxes. one for start date, one for end date and one for order id, i also have this bit of SQL
SelectCommand="SELECT [Order_ID], [Customer_Id], [Date_ordered], [status] FROM [tbl_order]WHERE (([Date_ordered] >= @Date_ordered OR @Date_ordered IS NULL) AND ([Date_ordered] <= @Date_ordered2 OR @Date_ordered2 IS NULL OR (Order_ID=ISNULL(@OrderID_ID,Order_ID) OR @Order_ID IS NULL))">
but the problem is it does not seem to work! i am not an SQL guru but i cant figure it out, someone help me please!
Thanks
Jez
Hi,
We got a problem.
supposing we have a table like this:
CREATE TABLE a (
aId int IDENTITY(1,1) NOT NULL,
aName string2 NOT NULL
)
go
ALTER TABLE a ADD
CONSTRAINT PK_a PRIMARY KEY CLUSTERED (aId)
go
insert into a values ('bank of abcde');
insert into a values ('bank of abcde');
...
... (20 times)
select top 5 * from a order by aName
Result is:
6Bank of abcde
5Bank of abcde
4Bank of abcde
3Bank of abcde
2Bank of abcde
select top 10 * from a order by aName
Result is:
11Bank of abcde
10Bank of abcde
9Bank of abcde
8Bank of abcde
7Bank of abcde
6Bank of abcde
5Bank of abcde
4Bank of abcde
3Bank of abcde
2Bank of abcde
According to this result, user see the first 5 records with id 6, 5, 4, 3, 2 in page 1, but when he tries to view page 2, he still see the records with id 6, 5, 4, 3, 2. This is not correct for users. :eek:
Of course we can add order by aid also, but there are tons of sqls like this, we can't update our application in one shot.
So I ask for your advice here, is there any settings can tell the db use default sort order when the order by column value are the same? Or is there any other solution to resolve this problem in one shot?
Hi,guys!I have a table below:CREATE TABLE rsccategory(categoryid NUMERIC(2) IDENTITY(1,1),categoryname VARCHAR(20) NOT NULL,PRIMARY KEY(categoryid))Then I do:INSERT rsccategory(categoryname) VALUES('url')INSERT rsccategory(categoryname) VALUES('document')INSERT rsccategory(categoryname) VALUES('book')INSERT rsccategory(categoryname) VALUES('software')INSERT rsccategory(categoryname) VALUES('casus')INSERT rsccategory(categoryname) VALUES('project')INSERT rsccategory(categoryname) VALUES('disert')Then SELECT * FROM rsccategory in ,I can get a recordeset with the'categoryid' in order(1,2,3,4,5,6,7)But If I change the table definition this way:categoryname VARCHAR(20) NOT NULL UNIQUE,The select result is in this order (3,5,7,2,6,4,1),and 'categoryname 'in alphabetic.Q:why the recordset's order is not the same as the first time since'categoryid' is clustered indexed.If I change the table definition again:categoryname VARCHAR(20) NOT NULL UNIQUE CLUSTEREDthe result is the same as the first time.Q:'categoryname' is clustered indexed this time,why isn't in alphabeticorder?I am a newbie in ms-sqlserver,or actually in database,and I do havesought for the answer for some time,but more confused,Thanks for yourkind help in advance!
View 2 Replies View RelatedHi,
We got a problem.
supposing we have a table like this:
CREATE TABLE a (
aId int IDENTITY(1,1) NOT NULL,
aName string2 NOT NULL
)
go
ALTER TABLE a ADD
CONSTRAINT PK_a PRIMARY KEY CLUSTERED (aId)
go
insert into a values ('bank of abcde');
insert into a values ('bank of abcde');
...
... (20 times)
select top 5 * from a order by aName
Result is:
6 Bank of abcde
5 Bank of abcde
4 Bank of abcde
3 Bank of abcde
2 Bank of abcde
select top 10 * from a order by aName
Result is:
11 Bank of abcde
10 Bank of abcde
9 Bank of abcde
8 Bank of abcde
7 Bank of abcde
6 Bank of abcde
5 Bank of abcde
4 Bank of abcde
3 Bank of abcde
2 Bank of abcde
According to this result, user see the first 5 records with id 6, 5, 4, 3, 2 in page 1, but when he tries to view page 2, he still see the records with id 6, 5, 4, 3, 2. This is not correct for users.
Of course we can add order by aid also, but there are tons of sqls like this, we can't update our application in one shot.
So I ask for your advice here, is there any settings can tell the db use default sort order when the order by column value are the same? Or is there any other solution to resolve this problem in one shot?
I have created view by jaoining two table and have order by clause.
The sql generated is as follows
SELECT TOP (100) PERCENT dbo.UWYearDetail.*, dbo.UWYearGroup.*
FROM dbo.UWYearDetail INNER JOIN
dbo.UWYearGroup ON dbo.UWYearDetail.UWYearGroupId = dbo.UWYearGroup.UWYearGroupId
ORDER BY dbo.UWYearDetail.PlanVersionId, dbo.UWYearGroup.UWFinancialPlanSegmentId, dbo.UWYearGroup.UWYear, dbo.UWYearGroup.MandDFlag,
dbo.UWYearGroup.EarningsMethod, dbo.UWYearGroup.EffectiveMonth
If I run sql the results are displayed in proper order but the view only order by first item in order by clause.
Has somebody experience same thing? How to fix this issue?
Thanks,
I am getting the resultset sorted differently if I use a column number in the ORDER BY clause instead of a column name.
Product: Microsoft SQL Server Express Edition
Version: 9.00.1399.06
Server Collation: SQL_Latin1_General_CP1_CI_AS
for example,
create table test_sort
( description varchar(75) );
insert into test_sort values('Non-A');
insert into test_sort values('Non-O');
insert into test_sort values('Noni');
insert into test_sort values('Nons');
then execute the following selects:
select
*
from
test_sort
order by
cast( 1 as nvarchar(75));
select
*
from
test_sort
order by
cast( description as nvarchar(75));
Resultset1
----------
Non-A
Non-O
Noni
Nons
Resultset2
----------
Non-A
Noni
Non-O
Nons
Any ideas?
I have a DB with items which can have lengths from 0 to 400 meter.In my resultset I want to show the items with length 1-400 meter and then the results with length 0 meterHow to build my SQL?
View 4 Replies View RelatedI noticed the StockDate is not sorted in proper order, like ascending order...
Code:
select top 1000 CONVERT(char, StockDate, 101) AS StockDate, timestamp from tblpurchaseraw where accountid = '119' order by stockdate desc
I noticed that StockDate is a datetime datatype so why does the month get ordered 1st, then day get ordered 2nd and year get ordered 3rd...
The sample data is MM/DD/YYYY...
So, how do I get it ordered propery by Year, Month then Day??
Lets say I have a table named [Leadership] and I want to select the field 'leadershipName' from the [Leadership] Table.
My query would look something like this:
Select leadershipName
From Leadership
Now, I would like to order the results of this query... but I don't want to simply order them by ASC or DESC. Instead, I need to order them as follows:
Executive Board Members, Delegates, Grievance Chairs, and Negotiators
My question: Can this be done through MS SQL or do I need to add a field to my [Leadership] table named 'leadershipImportance' or something as an integer to denote the level of importance of the position so that I can order on that value ASC or DESC?
Thanks,
Zoop
Hi,
I have some hierarchical data in a table. Say for example:
Parent Child
------------------------
NULL 1
1 2
1 3
2 4
2 5
3 6
3 7
5 8
5 9
7 10
7 11
11 12
11 13
Now I want to be able to use CTE's to be able to traverse this tree in
1) level by level order 1,2,3,4,5,6,7,8,9,10....
2) in order 1,2,4,5,8,9,3,6,7,10,11,12,13...
What would be the aueries for this. Using the following i get: 1,2,3,6,7,10,11,12,13,4,5,8,9 (interesting and potentially useful) but I would like to be able to experiment with the aforementioned orders as well.
with Tree (id)
as
(
select id from WithTest
where parent is null
union all
select a.id
from Tree b join WithTest a
on b.id = a.parent
)
select * from Tree
Any ideas? Thanks.
Hi!
For the Orders table (let's assume for the Northwind database), I'm trying
to get the order id of the latest order for every customer.
That means that the result should be one record per customer and that would
display CustomerID and OrderID.
Any ideas?
Thanks,
Assaf
hello
in the database.....
table:1
DELIVERY_HEADER
INVOICE# PO#
1111 001,0002,0003
2222 005,0006,0007
in one invoice has many po# number i already get the po number individually using explode...
the ouput like this
001
002
003 and so on it is ok for that
but my problem is
i want to the po# should be selected i mean like a menu ..like the user select the which po# should be updated....
but i dont know how..
is there anyone can help me?
to elaborate more...
i can display the po# already without commas like in invoice# 1111
i can already display the po# number like this
001
002
003
after that i want it to be like a menu that user will only select the which po# should be updated..using arrow keys down and up....i mean just like selecting..
but i dont know how..
PLS HELP ME
thank
r3sann
Hi all, I am stuck on the case of many-to-many selection.
Now, I have 3 tables
Table: candidate_skills
candidate_id (PKey)
skill_id (PKey)
Table: skills
skill_id (PKey)
Table: job_skill_required
job_id(PKey)
skill_id(PKey)
Now, I want to select all cadidates who has the same skills of job_skill_required table.
I really don't know how to select it...
Please help, thank you.
SELECT Distinct a.group_code, a.group_name + '-'+ a.group_note As full_name ,
b.station_nbr, b.beg_eff_date, b.end_eff_date,
Round( e.C02_pct,3)As C02_pct, MAX( e.sample_date)As Highest_Sample_Date, d.station_name
from [HOU-TIES01].TIES_Gathering.dbo.group_detail a
Inner Join [HOU-TIES01].TIES_Gathering.dbo.station_group b on a.group_code = b.group_code
Inner Join [HOU-TIES01].TIES_Gathering.dbo.station_type c on b.station_nbr = c.station_nbr
Inner JOIN [HOU-TIES01].TIES_Gathering.dbo.station d ON c.station_nbr = d.station_nbr
Inner JOIN [HOU-TIES01].TIES_Gathering.dbo.gas_analysis e ON d.station_nbr = e.station_nbr
Where (b.station_nbr=e.station_nbr)and (b.group_code = a.group_code) and
(a.group_type = 'NPN')and( b.end_eff_date >=DATEADD(mm,DATEDIFF(mm,0,dateadd(mm,-0-datepart(day,0),getdate())),0))
and ( (c.type_code = 'WHM')or ( c.type_code = 'CRP'))and
(e.sample_date Between DATEADD(mm,DATEDIFF(mm,0,dateadd(mm,-0-datepart(day,0),getdate())),0)
and DATEADD(mm, DATEDIFF(mm,0,getdate()), 0))
and e.seq_nbr =
(select max(x.seq_nbr)
From [HOU-TIES01].TIES_Gathering.dbo.gas_analysis x
Where x.station_nbr = b.station_nbr
and x.sample_date= e.sample_date )
and e.C02_pct =
(Select max(x.C02_pct)
From [HOU-TIES01].TIES_Gathering.dbo.gas_analysis x
Where x.station_nbr = b.station_nbr
and x.sample_date= e.sample_date )
Group by a.group_code, a.group_name, a.group_note, b.station_nbr, b.beg_eff_date, b.end_eff_date, e.c02_pct, d.station_name
order by a.group_code
ok. Here is how the data looks.
Group
code station_nbr beg_eff_date end_eff_date C02 sample_date
0004 D01G000819 2007-09-01 3000-12-31 0.40 2007-10-02
0004 D01G000819 2007-09-01 3000-12-31 2.49 2007-10-09
What I am trying to do is to select the most current sample date. In this case "2007/10/09" when station_nbr and group_code are the same for both dates.
Thank You for all your help!!!!
From the Jr.in SQL
Hi Team:
This is a new query and I am facing a new problem. Here I am requesting all the records for a Contract Number 'GTH00001' for the specific date of 2/2/2007. I want the SUM(c.rcpt_nom_vol)AS Receipt and the b]SUM(c.rcpt_fuel)As Allocated_Fuel[/b]
But Instead I am getting 147 records for Contract Number'GTH00001'for the date of 2/2/2007.
Declare @Req_Contract_nbr char (8),
@Req_Day int,
@Req_month int,
@Req_year int
Set @Req_Contract_nbr = 'GTH00001'
Set @Req_Day = '2'
set @Req_month = '2'
Set @Req_year ='2007'
SELECT Distinct a.contract_nbr,
c.beg_eff_date, c.rcpt_dlvry_ind,
SUM(c.rcpt_nom_vol)AS Receipt, SUM(c.rcpt_fuel)As Allocated_Fuel
from dbo.contract a
Inner Join dbo.NOm b on a.contract_nbr = b.contract_nbr
Inner Join dbo.Nom_vol_detail c on c.Nom_id = b.Nom_id
where (a.contract_sub_type = 'INT') and (a.Contract_type_code ='GTH')
and (DATEADD(mm, DATEDIFF(mm,0,getdate()), 0) < a.current_expirtn_date)
and (c.rcpt_dlvry_ind ='R') and a.contract_nbr= @Req_Contract_nbr
and Day(c.Beg_eff_date) = @Req_Day
and (month(c.Beg_eff_date)= @Req_month )
Group by a.contract_nbr,c.beg_eff_date, c.rcpt_dlvry_ind, c.rcpt_nom_vol, c.rcpt_fuel
Data Example
Contract_nbr specific Date rcpt_nom_vol rcpt_fuel
GTH000012007-02-02 00:00:00.000R4.00.0
GTH000012007-02-02 00:00:00.000R8.00.0
GTH000012007-02-02 00:00:00.000R11.00.0
GTH000012007-02-02 00:00:00.000R12.01.0
GTH000012007-02-02 00:00:00.000R14.01.0
GTH000012007-02-02 00:00:00.000R15.01.0
GTH000012007-02-02 00:00:00.000R16.01.0
GTH000012007-02-02 00:00:00.000R16.02.0
GTH000012007-02-02 00:00:00.000R16.04.0
Thank you for all your help!!!!!!!!! I deeply appreciate all your help.
Osiris
The future depends of what we do in the present- Mahatma Gandhi
Hi
I have CheckBoxList to make my selection as follows:if (CheckBoxList2.SelectedValue == "")
{
strSelect = strSelect;
}else if (CheckBoxList2.SelectedValue == "1")if (strWhere == " where")
{strWhere = strWhere + " pic1 = 'true' ";
}
else
{strWhere = strWhere + " and pic1 = 'true' ";
}if (CheckBoxList2.SelectedValue == "2")if (strWhere == " where")
{strWhere = strWhere + " pic2 = 'true' ";
}
else
{strWhere = strWhere + " and pic2 = 'true' ";
}if (CheckBoxList2.SelectedValue == "3")if (strWhere == " where")
{strWhere = strWhere + " pic3 = 'true' ";
}
else
{strWhere = strWhere + " and pic3 = 'true' ";
}
which mean it will addor remove the fields depends upon the user selection, but it will only select one !!
Thanks in advance
Hi,
First off, let me state that i am new to ASP.net... and have had to hit the ground running... I have looked on the net but have not found a suitable explanation on how to do this.
Let me explain what i am trying to do: In my aspx page, i have 2 dropdown boxes where the user will select a skill catagory, and then a skill. Based on that selection, i would like to compute what the Service line will be. There is a primary and foreign key on CatID on the skills and SkillCat tables. This data would need to be inserted into the another table aswell, and this would need to go into a report later.
How do i go about doing this? Some examples would be greatly appreciated. And if you know of a good link, please post it for me.
Skills Table
CatID
SkillID
Skills
SL_ID
1
4
Skill 1
3
2
5
Skill 2
2
2
6
Skill 3
2
3
7
Skill 4
4
3
8
Skill 5
4
4
9
Skill 6
NULL
4
10
Skill 7
NULL
5
11
Skill 8
3
6
12
Skill 9
3
7
13
Skill 10
4
8
14
Skill 11
1
9
15
Skill 12
3
9
16
Skill 13
3
10
17
Skill 14
6
11
18
Skill 15
1
Skills Catagory
CATID
Org
Skillcat
1
Org1
Skill Category 1
2
Org2
Skill Category 2
3
Org3
Skill Category 3
4
Org4
Skill Category 4
5
Org5
Skill Category 5
6
Org6
Skill Category 6
7
Org7
Skill Category 7
8
Org8
Skill Category 8
9
Org9
Skill Category 9
Service Line Table
SL_ID
Service_line
1
Service Line 1
2
Service Line 2
3
Service Line 3
4
Service Line 4
5
Service Line 5
6
Service Line 6
7
Service Line 7
Thanks for all your help in advance.
Dash
Hi all techies
suppose a table contains these set of values
employeeId EffectiveDate
1 2004-12-01
2 2004-12-01
2 2005-11-15
3 2004-12-01
so
1. when i want to select data for the date ranges
(2005-12-01) to (2005-12-31), it should be
1 2004-12-01
2 2005-11-15
3 2004-12-01
2. when i want to select data for the date ranges
(2005-11-01) to (2005-11-30), it should be
1 2004-12-01
2 2004-12-01
2 2005-11-15
3 2004-12-01
3. when i want to select data for the date ranges
(2005-10-01) to (2005-10-31), it should be
1 2004-12-01
2 2004-12-01
3 2004-12-01What should I do
Hello Experts,
I would like to have a SQL Statement that to display all records in the same year, e.g., 2001. The date field is a mm/dd/yyyy, smalldatefield.
Could anyone advise the syntax ?
Thank you very much.
We are looking to purchase a new SQL2000 server.... Tada.... Right then, for around about the same money, we could have either 2 x PIII 1Ghz Xeon with 256Kb cache, or 2 x PIII 700Mhz Xeon with 1Mb cache.... Which choice is best for SQL Server 2000???
View 1 Replies View RelatedI hope I can explain this somewhat coherantly. Here goes..
I have a products database. I want to select product details for items having distinct style codes. IE if there are 20 products that different from one another in some way, and 3 different style numbers throughout them, I want to end up with 3 products selected. I don't care which ones, as long as i have a sample product for each style.
I've attemped to use GROUP BY to do this, but it's not giving me what I want. I managed to get right number of products, but the query seems to have mixed and matched the fields together in an undesireable way. I guess this kinda makes sense, since providing aggregate functions for each of the extra fields is necessary.
SO THE QUESTION IS: How do I select (number of distinct styles) products, and still keep the records in tact as they should be?
Here is a sample...
Code:
SELECT DISTINCT Min(team) as team, min(pict) as pict, min(colors) as colors, min(league) as league, min(product_description) as product_description, min(category) as category, min(subcategory) as subcategory, min(style) as style
FROM prods
WHERE (style='style1' or style='style2' or style='style3')
AND league='leaguex'
AND soldout=''
GROUP by style
ORDER by style
Thanks very much for any help!! I'm sure I'm going about this all wrong.
I want to select a date from a datetime type column.
When I use:
Select ExpireDate from myTable Where ExpireDate > 2005-10-12
...I don't get the correct dates
When I use:
Select ExpireDate from myTable Where ExpireDate > '2005-10-12'
...(with the apostrophe, it works correctly. Is there a way this will work correctly without the apostrophies?
this is a close question to the prior post but different
pn Amount date billingamt idc
-------------------- --------------------- ------------- ------------ -----------
a7447 .0000 2005-12-28 150.0 10
a7447 .0000 2006-01-09 150.0 11
a7447 .0000 2006-01-10 150.0 12
a7447 50.0000 2006-03-30 150.0 1
a7447 100.0000 2006-04-09 150.0 2
a7447 150.0000 2006-04-16 150.0 3
a7447 150.0000 2006-05-09 150.0 7
a7447 150.0000 2006-05-17 150.0 8
a7447 10.0000 2006-06-16 150.0 15
a7447 150.0000 2006-09-06 150.0 9
a7474 .0000 2006-04-06 185.0 4
a7474 .0000 2006-04-22 185.0 5
a7474 25.0000 2006-04-24 185.0 6
a7474 10.0000 2006-06-16 185.0 16
a7474 50.0000 2006-08-22 185.0 13
a7474 100.0000 2006-09-20 185.0 14
Ok now i need to do is i need to calculate a sum of amount field which equals or less then billingamt for each permit ordered by the date desc
meaning result items should be
a7447 150.0000 2006-09-06 150.0 9
a7474 25.0000 2006-04-24 185.0 6
a7474 10.0000 2006-06-16 185.0 16
a7474 50.0000 2006-08-22 185.0 13
a7474 100.0000 2006-09-20 185.0 14
I can deal with just a count too
as in resulting
a7447 1
a7474 4
I hope the question make sense
i couldnt find any way to do this with out of a cursor any ideas
Thanks
Hi everyone -
I have two tables, one table (A) that holds a field called location that
has the partial path information of the file
and the second table (B) holds the full path including the filename
I only want to display the records from the partial path (A)
table that do not reside in the second (B) table
Table A =
imagefilename, description, directory, companyname, location
"96.jpg","test","Prog2006_02","Marey, John","Prog2006_0296.jpg"
"274.JPG","disney","Prog2006_07","Amy Gross","Prog2006_07274.JPG"
"570.jpg","sdfsdf","Prog2007_06","Lof3,"Test3","Prog2007_06570.jpg"
"850.JPG","222","Prog2007_08","Malis, Mark","Prog2007_08850.JPG"
Table B =
imagefilename
"d:webdatawebuploadsqfimagesProg2006_0296.jp g"
"d:webdatawebuploadsqfimagesProg2006_03112.p df"
"d:webdatawebuploadsqfimagesProg2006_03127.j pg"
I was thinking about using a cross join with a like condition,
but it fails (go figure)
could someone offer a little help to the query that i need to
perform??
thanks
tony
This is my sql query
Select DOJ AS 'JoiningDate' from emp where DOJ like '%2008/09/04%'
there are 8 records on this time.But it displays no result .
The column is datetime datatype
year month date or we need to mention any thing other than this.
SELECT a.Network_ID, b.Last_Name + ', ' + b.Preferred_FirstName AS full_name, c.Security_Class_Description,
d.Security_Type_Description, a.Security_Value
FROM Company_Hierarchy_Security a
JOIN V_Entity_Employee_Active b on a.Network_ID= b.Network_ID
JOIN Company_Security_Class c on a.Security_Class_Code=c.Security_Class_Code
JOIN Company_Security_Type d on a.Security_Type = d.Security_Type
inner join (select e.Budget_Center_ID + ' - ' + e.Budget_Center_Description As Budget_Center_Description,
f.Company_Name, g.Enterprise_Description, h.Business_Segment_Description,
i.Team_Description
from Company_Hierarchy_Security a.
Inner JOIN Budget_Center e on a.Security_Value = e.Budget_Center_ID
Inner JOIN Company f on a.Security_Value = f.Company_ID
Inner JOIN Enterprise g ON a.Security_Value = Cast(g.Enterprise_Number As Varchar(5))
Inner JOIN Business_Segment h on a.Security_Value = h.Business_Segment_ID
Inner JOIN Team i on a.Security_Value = i.Team_ID
Ok. I have the Security Value located in Company_Hierarchy_Security table. All those values are divided into 5 other tables that I need to join together. I found all of them separate but I have not been able to figue it out how to put it together with the rest of the querie.
Thanks for the help!!!!!