Sending Mail From Stored Procedure?
Mar 1, 2006
Dear All,
I need to create a functionality in SQL server 2000 that would send out data from a table to users within our company.
Is there some built in funcitonality wherby i can mail out the selected data from the table from a stored procedure? Then i could schedule the stored procedure to be run every morning at 7 am.
Never done this, can some one let me know if that would work and give me some pointers on what commands to use in the stored procedure? Thanks in advance!
View 7 Replies
ADVERTISEMENT
Mar 28, 2008
Hi,
I have created a stored procedure for sending mail. While executing that i am getting the following error message:
SQL Server blocked access to procedure 'sys.sp_OACreate' of component 'Ole Automation Procedures' because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of 'Ole Automation Procedures' by using sp_configure. For more information about enabling 'Ole Automation Procedures', see "Surface Area Configuration" in SQL Server Books Online.
Can anybody explain me how to resolve it?
Expecting the solution at the earliest
View 2 Replies
View Related
Aug 18, 2015
I have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 Replies
View Related
Mar 7, 2007
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
View 1 Replies
View Related
Dec 13, 2007
Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
View 11 Replies
View Related
Jun 8, 2006
Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
View 11 Replies
View Related
Feb 6, 2008
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
View 7 Replies
View Related
Nov 10, 2006
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
View 3 Replies
View Related
Mar 9, 2007
Hi every body
I want to send a simple mail using DATABASE MAIL feature in SQL SERVER 2005.
I've defined a public profile.
I've enabled Database Mail stored procedures through the Surface Area Configuration .
but I can't send a mail with sp_send_dbmail stored procedure in 'msdb' database .
when I execute sp_send_dbmail in the Managment Studio the message is
"Mail queued" but the mail is not sent.
Could it be related to Service Broker?Because the Surface Area Configuration indicates:'this inctance does not have a Service Broker endpoint'.If so, how should I make an endpoint?
here is the log file after executing sp_send_dbmail:
1) "DatabaseMail process is started"
2) "The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2007-03-08T00:49:29). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it)."
The DatabaseMail90.exe is triggred ,so the mail is transfered to the mail queue but DatabaseMail90.exe couldn't give the mail to SMTP server.The promlem is what should I do to make DatabaseMail90.exe able to connect to the server?
please help me.
POUYAN
View 21 Replies
View Related
Feb 23, 2005
Hello
How can I send a list(s) of data into a stored procedure for processing?
For instance, I have a table: GroupContacts(groupname, userid, contactid).
At times I will be inserting X amount of records into it, X depends on how many contacts need to be added to a group by a user.
How can I send a list of (groupname, userid, contactid)'s into a stored procedure and then use some kind of for-loop to iterate through the list and insert the records?
Thanks
jenn
View 3 Replies
View Related
Jul 14, 2000
I have created a DTS package. I want to know how to call/run this package from a stored procedure.
Please let me know how to call this DTS from a Stored Procedure.
Thanks.
-Rajesh
View 1 Replies
View Related
Nov 3, 2005
In a VB.NET script, I am adding the dbnull value to a parameter that will populate a smalldatetime column:
cmd.Parameters.Add("@unitHdApprove", System.DBNull.Value.ToString)
The stored procedure then defines the input as smalldatetime:
@unitHdApprove smalldatetime,
However, the result is that the record is inserted with 1/1/1900 as the date value, instead of <NULL>.
I'm guessing that this occurs because the conversion of a '' to date will return 1/1/1900, and VB requries the parameter value to be a string (at least with this syntax), so System.DBNull.Value.ToString really equals ''.
I've rewritten the proc to accept the date as a string instead, and then for each date, cast it to a smalldatetime or set it to null as is appropriate. But this is a really bulky way to do things with more than a few dates! Is there any way to change what is in my VB code so that the procedure will insert the actual null value?
Thanks,
Sarah
View 2 Replies
View Related
Feb 23, 2005
Can someone post some code that shows a Stored Procedure receiving a cursor that it can process - lets say a group of order detail records are received that must be saved along with the single Order header record.
And, in another example, a SP returns a result set to the calling program. - For example, a particular sale receipt is pulled up on the screen and the order detail is needed.
Thanks for help on this,
Peter
View 14 Replies
View Related
Jul 23, 2005
Hi all..I'm trying to send multiple INT values to a Stored Procedure that willbe handled in an IN statement.ASP Code:strSQL = "SP_Get_Selections '29, 32'where 29 and 32 are 2 integer valuesNow, in my stored procedure... I would like to look these values up inan IN statement likeCREATE Procedure SY_GET_SELECTIONS@authorid varchar(20)SELECT * FROM Authors WHERE AuthorID IN (@authorid)But when I use this, I get [Microsoft][ODBC SQL Server Driver][SQLServer]Syntax error converting the varchar value '29, 32' to a columnof data type int.Any help would be great.Thanks
View 1 Replies
View Related
Nov 10, 2007
I have some long running stored procedures that I invoke from ADO.NET (using Typed Datasets).
Inside the stored procedure, I like to keep track of the execution by using the PRINT command.
Is there a way of extracting and displaying this PRINT information in .NET during the stored procedure execution?
View 4 Replies
View Related
Jun 28, 2004
if i send the string
2,3,4,5 to a stored procedure...
is there a way i could split those values for input into the database? no, right? i would need a seperate stored procedure that would take each value one at a time...correct?
View 7 Replies
View Related
Jun 30, 2006
Can anyone help,
I have a problem with calling my stored procedure in vb and passing in its parameters. the system is supposed to then use the store the procedures recordset and use this to pass into a crystal report.
I am getting the following message:
Procedure 'TestReport' expects parameters '@StartDate', which was not supplied.
This happens on the objCom.Execute line.
This is my code:
Dim CRXApplication As New CRAXDRT.Application
Dim CRXReport As CRAXDRT.Report
Dim CRXDatabase As CRAXDRT.Database
Set CRXReport = CRXApplication.OpenReport(APPConst.DatabasePath & stReport & ".rpt")
Dim objCom As adodb.Command
Set objCom = New adodb.Command
Dim prm_one As adodb.Parameter
Dim prm_two As adodb.Parameter
Dim prm_three As adodb.Parameter
Dim fdate, tdate As Date
Call CRXReport.Database.Tables(1).SetLogOnInfo("dell330", "Rota", "RotaAdmin", "dadcahadfu")
Set CRXDatabase = CRXReport.Database
fdate = cboFrom.Value
tdate = cboTo.Value
With objCom
.CommandText = "TestReport"
.CommandType = adCmdStoredProc
.ActiveConnection = cn.ConnectionString
Set prm_one = .CreateParameter("@StartDate", adDBTimeStamp, adParamInput, 8, fdate)
.Parameters.Append prm_one
Set prm_two = .CreateParameter("@EndDate", adDBTimeStamp, adParamInput, 8, tdate)
.Parameters.Append prm_two
Set prm_three = .CreateParameter("@Team", adInteger, adParamInput, 4, 2)
.Parameters.Append prm_three
.Parameters.Refresh
End With
Set SQLRecs = objCom.Execute
CRXReport.DiscardSavedData
CRXDatabase.SetDataSource SQLRecs, 3, 1
This is my Stored Procedure:
CREATE PROCEDURE [dbo].[TestReport] @StartDate datetime, @EndDate datetime, @Team int AS
SELECT dbo._Staff.UniqueName, 2 * DATEDIFF(day, @StartDate, dbo._StaffUnavailable.[Date]) + dbo._StaffUnavailable.TimeCode AS Expr1,
COUNT(dbo._StaffUnavailable.ID) AS CountOfID, dbo._StaffUnavailable.[Date], dbo._Team.Description AS Team, dbo._Staff.Team_ID
FROM dbo._Staff INNER JOIN
dbo._StaffUnavailable ON dbo._Staff.Staff_ID = dbo._StaffUnavailable.Staff_ID INNER JOIN
dbo._Team ON dbo._Staff.Team_ID = dbo._Team.ID
GROUP BY dbo._Staff.Staff_ID, dbo._Staff.UniqueName, 2 * DATEDIFF(day, @StartDate, dbo._StaffUnavailable.[Date]) + dbo._StaffUnavailable.TimeCode,
dbo._StaffUnavailable.[Date], dbo._Team.Description, dbo._Staff.Team_ID
Having Team_ID = @Team AND ([Date] >= @StartDate AND [Date] <= @EndDate)
GO
Thanks in advance
Ian.
View 4 Replies
View Related
Oct 24, 2007
hi there,
the subject line says it all. is there a way to send nicely formatted html email from within a stored procedure that returns a dataset?
thanks!
chris
View 2 Replies
View Related
Oct 14, 1999
Hi.
I have problems with sending a mail from SQL Server:
SQL Mail starts.
Command: xp_sendmail 'MRudyk','Halo!'
returns:Unknown recipient: Parameter '@recipients', recipient 'Mrudyk'
'Mrudyk' is valid recipient...
View 2 Replies
View Related
Jun 25, 2007
I am unable to send null values through the Microsoft JDBC 1.1 driver to a stored procedure. Please look at the thread already started on the SQL Server Transact SQL Forum at http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1772215&SiteID=1
View 1 Replies
View Related
Mar 28, 2008
I have written a stored procedure which should send mail from the stored procedure in sql server 2005. Here is the SP
set ANSI_NULLS ONset QUOTED_IDENTIFIER ONgo
ALTER Procedure [dbo].[sp_SMTPMail]
@SenderName varchar(100),@SenderAddress varchar(100),@RecipientName varchar(100),@RecipientAddress varchar(100),@Subject varchar(200),@Body varchar(8000),@MailServer varchar(100) = 'smtp.mail.tspl.com'
AS
SET nocount on
declare @oMail int --Object referencedeclare @resultcode int
EXEC @resultcode = sp_OACreate 'SMTPsvg.Mailer', @oMail OUT
if @resultcode = 0BEGINEXEC @resultcode = sp_OASetProperty @oMail, 'RemoteHost', @mailserverEXEC @resultcode = sp_OASetProperty @oMail, 'FromName', @SenderNameEXEC @resultcode = sp_OASetProperty @oMail, 'FromAddress', @SenderAddress
EXEC @resultcode = sp_OAMethod @oMail, 'AddRecipient', NULL, @RecipientName, @RecipientAddress
EXEC @resultcode = sp_OASetProperty @oMail, 'Subject', @SubjectEXEC @resultcode = sp_OASetProperty @oMail, 'BodyText', @Body
EXEC @resultcode = sp_OAMethod @oMail, 'SendMail', NULL
EXEC sp_OADestroy @oMailEND
SET nocount offexec sp_smtpmail 'ramana','venkataramanaiah.uppalapati@tspl.com','rajan','ramana.u@gmail.com','test','This is a sample message'
when i execute the SP by giving the following input parameters like
exec <spname> 'rajan', 'rajan.crp@tspl.com', 'venkat', 'venkat@tspl.com', 'test', 'Test Message'
It ran successfully but the recepient venkat@tspl.com did'nt receive any mail from rajan.crp@tspl.com
I used the following commands for configuring OLE Automation Procedures
exec sp_configure 'Show
View 4 Replies
View Related
Apr 27, 2000
I am having a problem with SqlServer 7.0 sending mail when the sqlserver account is not logged into the machine and mail is open. If I log off of the box and an alert sends mail it just sits in the outbox of the mail client until I log in. Is this the way it is supposed to be or am I doing something wrong. I am using the Inbox as my client.
Thanks
Tom Goltl
View 1 Replies
View Related
Jul 22, 2006
Hi,
I am using SQL Server 2005. I have configured my email on Database Mail. when I am trying to send email using xp_sendmail I am getting problem error as:
Msg 17925, Level 16, State 1, Line 0
xp_startmail: failed with mail error 0x80040111
I am using following sql statement
master.dbo.xp_startmail 'myaccount','mypwd'
master.dbo.xp_sendmail 'tomail1@mail.co.in','test'
where myaccount and mypwd is my password on my email profile.'tomail1@mail.co.in' is the destination email address..
thanks
View 15 Replies
View Related
Jun 18, 2008
Hello all,
I've run into a situation which I'm not sure which option to use. I have a web-based app that needs to send an email to a user once an auction has ended (the user being the winning bidder). The backend of the app is SQL 2005. I'm trying to figure out how to get this to work but I'm not sure if I should be using Database Mail or if I should be using a windows service on the web server that pings the database to check if the auction has ended and if the user has been notified. Can anyone shed some light as to which way I should be doing this? Additionally, I'm planning on formatting the style of the mail message so it'll need to be in HTML format and not plain text.
Any help is greatly appreciated.
Regards,
Axel
View 17 Replies
View Related
May 9, 2001
I need help regarding how to send mails through SQL server. Let me give you some more details: I am having a table where in all the e-mail id's are stored so i need to write a stored procedure that will pick up the email id from the table and it has to send the mail once you run the stored procedure.
Any help in this regard will really help...pls help me out...
View 1 Replies
View Related
Aug 25, 2000
Hi,
I have few DTS package schedule on my SQL Server 7. When the DTS fail, it's supposed to send an e-mail to me. But, for an unknown reason, the server send me some e-mail to report the failure of the DTS and suddenly...nothing. The server stop sending e-mail to report the failure of the DTS package. I decided to restart the Server and... i receive over 300 e-mails that i was supposed to receive 3 week ago about the failure of the DTS package. It's not the first time that this problem occur and everytime i need to restart the server, now i am tired of that.
Does anyone have see this problem before?
Martin
View 1 Replies
View Related
Jun 9, 2008
Hai to all.,
Im trying to send mail from Sql server but my efforts were ended in vain can any one help me on this.,
I have done the coding lik this..
step 1:
use master
go
sp_configure 'show advanced options',1
go
reconfigure
go
sp_configure 'Database Mail XPs',1
go
reconfigure
go
Step 2:
EXECUTE msdb.dbo.sysmail_add_account_sp
@account_name = 'Admin', -- Account Name on SMTP (User Defined)
@description = 'Mail Account for Database Mail',-- Account mail description. (User Defined)
@email_address = 'chandrubrave@gmail.com',-- Mail sender E-mail address (User Defined)
@display_name = 'Admin', -- Mail Sender display name, which displays, when mail received by recipient (User Defined)
@username= '', -- SMTP Sever User Name
@password='', -- SMTP Server Password
@mailserver_name = '190.160.110.50' -- SMTP Server Address'.
step 3:
EXECUTE msdb.dbo.sysmail_add_profile_sp
@profile_name = 'New profile',
@description = 'Profile used for database mail'
Step 4:
EXECUTE msdb.dbo.sysmail_add_profileaccount_sp
@profile_name = 'New profile',
@account_name = 'New Admin',
@sequence_number = 1
Step 5:
EXECUTE msdb.dbo.sysmail_add_principalprofile_sp
@profile_name = 'New profile',
@principal_name = 'public',
@is_default = 1 ;
Step 6:
declare @body1 varchar(100)
set @body1 = 'Server :'+@@servername+ ' My First Database Email '
EXEC msdb.dbo.sp_send_dbmail @recipients='chandramohanc@zylog.co.in',
@subject = 'My Mail Test',
@body = @body1,
@body_format = 'HTML' ;
I have got a response like --Mail queued.
But i dint get any mail and also in msdb.dbo.sysmail_event_log table have got an entry with description fails ..
Sorry for posting such a long post..
Thanks In advance
View 2 Replies
View Related
Feb 24, 2007
Hi All,
I'm trying to send mail from sql server I searched the net and i have some things needs calrification and help
What is the difference between sqlmail and sql agent mail ?
is it possible to use and configure them with out having OutLook installed on the server?
when creating a mail profile to be used by SQL mail this profile must be created under the account that runs SQL SERVER Service .. must this account be authenticated under Exchange server if i connect to it ??
to connect to Microsoft Exchange Server can i use the XPSMTP or i have to use SQL MAIL ??
Too much questions i Know but i appreciate your help any way
View 3 Replies
View Related
Jun 11, 2007
Hi,
i want to send Mail from sql server.which means that when i execute an query a mail will send to mentioned e-mail.is it any predefined function is there?.if,yes,can u explain Detail.
Regards
Umapathy
View 2 Replies
View Related
Jun 12, 2007
I need to find a way to send mail in blocks of 100 and 500 at intervals of 120 seconds. Does anyone know of any code for this?
Thanks!
Etymon
View 4 Replies
View Related
Jun 29, 2007
Hi,
I have 0 experience with SQLMail, and I don't want to go too deep into it as I already am trying to learn more than I can with the other parts :) I'm wondering, is there an easy way to have SQL Email me when anything strange happens with the SQL server? It would be awesome to get alerts to my phone.
Thanks very much
mike123
View 4 Replies
View Related
Feb 14, 2008
Hi,
I have the table like
Id Pickuptime
1 2008-02-14 13:07:06.317
If the record is inserted to the above table that would look at a pickuptime field in a table and if pickuptime is 2008-02-14 13:07:06.317 after 6 hour from the pickuptime then I would send a email to briteindia_kumar@hotmail.com
How i would do this would any one help to me.
Thanks
kumar
View 2 Replies
View Related
Mar 27, 2008
Dear Gurus
I have got a requirement.
I need to send mail with an attachment.
for eg.
An employee has requested leave a mail should go to the person he is reporting to as a mail and with this mail
an attachment of the leave request should be sent.
When the person who recevies mail he opens the attahcment and apporves the leave request or rejects a return mail to go to all concerned.
View 3 Replies
View Related
