I have a sendmail task following a data flow task. How can I set "To" attribute on the sendmail task before running it ? for example, read a config table and detemrine who the mail should be sent to...
View 1 RepliesHi
I'd like to access to a SendMail object with an ActiveXScript.
I access it by the Tasks property of the package object.
I can retrieve the name or the description but I cannot access to the specific properties of the SendMail object (fileAttachments, ccline, ...)
How can I do it ?
THanks
hi,
at the end of my ssis package flow, i want to invoke a sendmail task.
now, when configuring the sendmail service, i see i can only enter the name of my smtpserver. however, i see the task fails, probably because a user and a password is missing (i have it, but don't see where to type it in the SSIS).
(i want to use the smtp server of my internet provider)
anyone can help?
Does exchangeServer accept in SendMail task?
only SMTP?
who knows?
For internal mail server , it's only via exchange server.
Hi all--I am writing a DTS package looking to back up all databases in sequence from a specific instance of SQL Server. I am calling CDOSYS in a stored procedure from support.microsoft.com to send email upon failure. I have two types of SQL tasks I am writing into the DTS package:
1. backup database <database> to disk = '<drive>:<path>.bak' with init
2. Upon failure of a particular database to back up to file, execute the following SQL task:
declare @srvname varchar(128),
@db_name varchar(128),
@msg nvarchar(4000)
SELECT @srvname = @@servername
select @db_name = db_name()
set @msg = 'Hi--check your database backups. The ' + @db_name + ' database backup on ' + @srvname + ' has failed.
Thanks--SQL Server';
SELECT @srvname, @db_name, @msg
(Many thanks to Whitney Weaver and SQL_Menace for help with sections of this code)
Upon success of #1 and/or #2, go on to the next database, repeating cycle of the SQL tasks above for the next database in the task. For example, this logic goes like:
1. Back up master database; if fails, send email in SQL task; if either task is successful, goto database #2;
2. Back up model database; ...<etc>.
My problem is the current database set in @db_name. I apparently need to reset this variable for each database that gets backed up, and I can't seem to get these set as values to be passed from SQL Task #1 to SQL Task #2. Any suggestions on how I might achieve this?
- Jonathan
Hi,
I have a sendmail task in my ssis package. In the From field, if i hardcode my from and to address as user@company.com it works fine and mail is sent. But i want to read the from and to values from a database table. SO i defined the package level variables and getting the values into the variables. SO at From if i specify the variable name it gives a compiel time error"the address in th from line is mal formed. it is either missing @ character or not valid".
how do i specify teh variable for from address? I feel, may be i can use expression, but i don't know how to do that.
Can anyone help me with this?
Thanks in advance,
I have multiple sequence containers in my package. I only want to have one sendmail task for the failure/completion of the package. If I put the sendmail task in the last sequence container and the first seqence fails, the sendmail task will not be reached and therefore, no email will be sent out.Is there a way to have one sendmail task for all the sequence containers and allow it to send mail regardless of what sequence fails/completes?
View 4 Replies View RelatedWhen I am executing the following sendmail code,it is apending the results to the mail.But I want the results to be sent as attachment,in .txt format.
exec master..xp_sendmail
@recipients='Tpolasp@hotmail.com',
@query='c2usa..sp_report_daily_pc',
@attach_results='true',
@subject='Daily fastquotes'
Interestingly,even if I use @attachments option by giving a specific file name,then also it is sending the mail in which the contents of the attached file are appended to the mail!
Is there anything that I shall configure somewhere to make it behave properly?
I am using 7.0 standard edition with no SP.Any help is greatly appreciated.
Thanks.
hi
how to sendmail in sql2000
--------------------------------------------
Declare @filename char(22)
Declare @cmd char(100)
Select @filename = '"' + 'D:Feedsest_' + substring(convert(char(12), getdate(), 12), 3, 4) + substring(convert(char(12), getdate(), 12), 1, 2) + '"'
Select @cmd = "xp_sendmail @recipients = 'test@test.com'
, @attachments = " + @filename + " "
exec(@cmd)
Go
--------------------------------------------
Above T-SQL step is causing the following error:
Server: Msg 103, Level 15, State 7, Line 6
The identifier that starts with 'xp_sendmail @recipients = 'test@test.com'
is too long. Maximum length is 128.
Any help??Thanks.
When I am executing the following sendmail code,it is apending the results to the mail.Actually, I want the results to be sent as attachment,in .txt format.
Any help is greatly appreciated.
exec master..xp_sendmail
@recipients='Tpolasp@hotmail.com',
@query='c2usa..sp_report_daily_pc',
@attach_results='true',
@subject='Daily fastquotes'
Thanks.
Hi to everyone,
By the way, I'm not sure if, I am in the right related forum to address this questions.
My problem is how to customize a primary key id of the table.
Example. I have a two tables customer and product, and my customer table has a customer id. I want to customize my customer id, which for example the starting id will starts CUS-0001...CUS-002 and so on.
And same also to my product table, product id will starts PROD-001..PROD-002 and so on. the digits of my id's is auto incremented.
Thank you for the time of reading my questions.
Your response is highly appreciated..
I have a step like this: I am getting the following error:How to code @attachments in quotes?? thanks.
The name specified is not recognized as an
internal or external command, operable program or batch file.
(2 row(s) affected)
Here is my T_SQL step:
Declare @filename char(22)
Declare @cmd char(100)
Select @filename = 'D:Feedsest_' + substring(convert(char(12), getdate(), 12), 3, 4) + substring(convert(char(12), getdate(), 12), 1, 2)
EXEC xp_cmdshell @recipients = 'test@test.com'
, @attachments = @FileName
I have setup SQL Mail on a SQL Server 2000 (service pk 3a) with outlook 2002.
SQL Mail give me the success message when I test the profile.
When I send a test message to an operator from SQL Agent it works fine.
When I send a message from the Outlook 2002 client (logged in as the Service-SQL domain account), I can send a message without a problem.
However, when I send an xp_sendmail message (xp_sendmail @recipients='email@address',@message='test',@subje ct='test') it tells me 'Mail Sent' in the result window, but the email never arrives or shows up in the 'sent items' folder in outlook 2002.
Anyone else have this issue.
Thanks - Rick
For example the result of an Execute T-SQL Statement task.
This task does not have a hook-up for variable assignment, the SendMail can take in a variable. How do you pass the result of EXEC T-SQL statement be assigned to the variable in the SendMail task?
Hello All,
I have an Execute SQL Task and a SendMail in the control flow of my package.
If the Execute SQL Task inserts records in the Database, I want the SendMail task to be executed.
But if Execute SQL Task does not inserts even a single record in the Database, I dont want the SendMail task to be executed.
How can I achieve this...
Thanks,
Kapadia Shalin P.
Hi,
Is it possible to customize the report manager web site so that I can set the report output format to excel by default.
Currently, to get the excel report user has to first select the report criteria and then click the "view report" button which renders the report in HTML format and then only the export to excel option appears.
Is there a way we can get the report exported to excel in one go.
Thanks,
Rajiv
I would like to use Report Managers interface for choosing reports.
But all of the reports uses different dsu(datasourceuser) and dsp(datasourcepassword) depending on which user that is logon.
I would like to call the interface from a webapplication(where they have the current dsu & dsp).
Is there a way to customize Report Manager to save the dsu & dsp so users don't have to login for each report?
Or could I make a clever transformation from the Windows userid?
Or any other ideas??
Hello All:
I have the following data:
2000 2001
Child Teen Adult Child Teen Adult
Region1 25 40 35 33 55 12
Region2 50 10 40 20 10 70
Total 75 50 75 53 65 82
and I need the following data
2000
Child Teen Adult Child%
Region1 25 40 35 25/(25+40+35)
Region2 50 10 40 50/(50+10+40)
Total 75 50 75 75/(75+50+75)
I was able to get the Child% column and Total row, except for the cell (75/(75+50+75) ) using InScope() operator.
Can any one help me in this regard.
Thanks,
Vishnu
Can I customize the report filters?
I need to use the data from another table (in a Drop Down control) to filter the data of my report instead of having a simple textbox.
How can I do this?
Hi, with some help today I was able to get my stored procedure runningand have the results emailed to me. However, this is how its showingup:Accounting_Year WK_IN_FYEAR LocationGL_AccountCol Data Difference--------------- ----------- ------------------------------------------------------------------ -------------------- --------------------2007 49 Test1500-001-2587872.0200 -2587872.0200 .00002007 49 Test2500-001-3344713.5000 -3344713.5000 .00002007 49 Test3500-001Is there anyway to line them up side by side properly? When i have twocolms selected the format comes out ok. Thanks for all the helpagain!Here is the sp:CREATE PROCEDURE [dbo].[spEmailVariance](@SubjectLine as varchar(500),@EmailRecipient VARCHAR(100))ASDECLARE @strBody varchar(5000)set @SubjectLine = 'Weekly Flash Update'SET @strBody ='Select statement'exec master.dbo.xp_sendmail@recipients= 'XX@XXXX.com',@subject= @SubjectLine,@query = @strbodyRETURNGO
View 2 Replies View RelatedHow do I Convey Information using Notification - can someone please explain?
View 4 Replies View RelatedHello everyone,i have a web form to take user details.as soon as the submit button is clicked the form is submitting and the new row is being added into the sqldatabase.its fine ..but in the newly added row, i want the user id(primary key and auto generating) to display in different manner.in mytable column(userid),instead of userid auto displaying 1,2,3,4 ...i want it to display in this way.these are all primary keys of rows added.todaydate-username-1 eg(2.2.2008-jack-1)todaydate-usernaem-2 eg(2.2.2008-zak-2)todaydate-usernaem-3 eg(2.3.2008-leme-2)any idea how to achieve this.?thanks.jack.
View 9 Replies View RelatedDisplay customized data based on customized where statement from UDT.
The UDT is a parameter inside of a stored procedure.
Problem:
A parameter from a stored procedure is
@communication communications readonly
This parameter is a User-Defined Table Types (UDT) It contains criteria based on end-user's selection from a filtration functionality from a webpage.
Four example of filtration critera based on four end-users' selection that is located inside of a table below.
Each UDT table contains different criteria:
Number Criteria
------ --------
1 Phone
3 Email
Number Criteria
------ --------
1 Phone
2 Cellphone
3 email
Number Criteria
------ --------
4 None
Number Criteria
------ --------
2 Cellphone
1 Phone
Is it somehow possible to use the criteria's value as a column name in the where statement? I want to filtrate the data of the table datatable based on id, name and the UDT's criteria.
I was enable to apply the criteria inside of a variable by looping the UDT's table but the next thing is to paste it in the where statement after "id=1 and name" below
select *
from datatable
where id = 1 and name = 'Cost'
How should I do it?
[URL] .....
create table datatable (id int,
name varchar(100),
email varchar(10),
phone varchar(10),
cellphone varchar(10),
none varchar(10)
);
[Code] .....
Thanks in advance to anyone who can provide insight into this...
I am trying to specify a different stylesheet (other than ReportingServices.css) in the URL for running the ReportManager application; I am using the "rstylesheet=<stylesheetname>" parameter in the URL. However, it seems that no matter which format of stylesheetname I use (i. e, just the stylesheet file name with no extension, stylesheetname + ".css" extension, "/reports/styles/<stylesheetname>", etc.), the ReportManager application only uses the built-in ReportingServices.css stylesheet.
Is there some "magic" to specifying the name of an alternate stylesheet with the "rstylesheet" URL parameter, or does this just not work?
Thanks again!
Hi,
I'm trying to deal with a way to change the report parameter's default layout.
currently it seems to default to two columns, that's fine until you have a large screen and the "View Report" button is all the way to the right and you have a big chunk of whitespace.
For Example:
Parameter 1 Parameter 2 <View Report>
Parameter 3
I'd like it to show up instead as:
Parameter 1 Parameter 2 Parameter 3 <View Report>
anyone ever tried this before?
Is it possible to customize the SQL Server Reporting services home page to add our company Logo and custom title etc...?
Thank you,
I am trying to send a csv file with 15000 records via the database mail in SQL Server 2014. The problem is that when I open my email the csv only contains 209 records. I have tried the same thing in SQL Server 2012 and it works as expected - it sends the 15000 records in the csv.
I have tested this on several sql servers with 2014 edition on them, and I have the same issue on all of them. The query breaks off at different points on each sever - for example one of them breaks off at 209 records as i said above, another one at 307. The last record always gets truncated at the same place. The csv attachment size it's about 64 kb - which is well below the 4MB limit i've configured the database Maximum File Size bytes parameter.
What i am doing basically is creating a job that is meant to execute a stored procedure and send the results in a csv in an email. The stored procedure is something like:
select col1, col2, col3
from table A1
where col1 > 1000 order by col1
Hello all,I have a stored procedure that prompts the user for beginning date andending date to run a monthly report. The prompt saysEnter_Beginning_Date and Enter_Ending_Date. I want the prompt to sayEnter Beginning Date (Example:1-1-2003) or something like that. Isthere a way to do this?CREATE PROCEDURE dbo.MonthlyReport(@Enter_Beginning_Date datetime,@Enter_Ending_Date datetime)AS SELECT incident, @Enter_Beginning_Date AS BeginningDate,@Enter_Ending_Date AS EndingDate, COUNT(*) AS OccurancesFROM dbo.IncidentWHERE (DateOccured BETWEEN @Enter_Beginning_Date AND@Enter_Ending_Date)GROUP BY incidentGO
View 6 Replies View RelatedI am working on one of the report. where I need to move the amount across column group.
My data is like this
Project Amount CurrentFiscalMonth DelaybyMonth
A 10 Jul 0
B 20 Aug 2
C 10 Sep 0
Report will be sum up the amount at CurrentFicalMonth grouping on column
But, if the Project is being delayed say by as per the example its 2 months than the amount should be moved from Sep to Oct column for the particular project. User has done it using the Offset function in excel.
Fiscal month starts at July and ends at June. and data source is SSAS cube.
Hi,I've managed to get a couple of shortcuts on my desktop that log meright into SQL Query Analyzer for whichever particular database I want(using the isql.exe command line options). Now, I want to do a similarcustomization for the SQL Server Enterprise Manager. I want to be ableto open SQL Server Enterprise Manager and have it pop me all the waydown into my particular database/tables view -> e.g. "Microsoft SQLServersSQL Server Group(LOCAL) (WindowsNT)DatabasesmyDatabaseName". I'm hitting a local db server...I've tried saving new consoles (.msc files), but that just doesn't seemto do anything. I've tried using bookmarks, also, and they just don'tdo anything at all when I select them.Any ideas??
View 1 Replies View RelatedI have a requirement associated with SSRS bar chart.
Data in my DB is like shown below:
A
B
C
Opt1
Data1
10
Data2
20
Opt2
Data1
30
Data2
40
Opt3
Data3
50
Now I would like to build up a bat chart which should have:
Legends: Opt1, Opt2, and Opt3
Categories:
Data1(showing bars with scores as 10 and 30),
Data2 (showing bars with score 20 and 40),
Data3 (showing bar with scores 50 only)
I need to create the script to upgrade the current named instance of sql 2000 desktop engine to sql server 2005 express edition. I am having difficulty preparing the template.ini and would appreciate help.
[Options]
INSTANCENAME=MY_INSTANCE
SQLBROWSERACCOUNT=NT AUTHORITYNETWORK SERVICE
SECURITYMODE=SQL
SAPWD=music
UPGRADE=SQL_Engine
SQLBROWSERAUTOSTART=1
RSCANINSTALLDEFAULT=0
RSCONFIGURATION=FilesOnly
RSSQLLOCAL=0
I get an error that this file is invalid..Any clues? I am trying to upgrade existing instance of msde 2k to sql express 2005 and uses sql authentication