Server Error In '/' Application Incorrect Syntax Near ','.
Nov 20, 2006
This code used to work now I get an error(error follows code)
can anyone tell me where I went wrong?
[vbcode]
i = 0
For i = 0 To 7
If requests(i) <> "" Then
request = requests(i)
Dim sql1 As String = "insert request_items ([req_id],[request]) Select Case max(req_id), " & request & " from(requests)"
Dim myCommand1 As New SqlCommand(sql1, myConnection)
myCommand1.ExecuteNonQuery()
Else
Continue For
End If
Next
[/vbcode]
Server Error in '/' Application.
Incorrect syntax near ','.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near ','.
Source Error:
Line 73: Dim sql1 As String = "insert request_items ([req_id],[request]) Select Case max(req_id), " & request & " from(requests)"
Line 74: Dim myCommand1 As New SqlCommand(sql1, myConnection)
Line 75: myCommand1.ExecuteNonQuery()
Line 76: Else
Line 77: Continue For
I am getting an error saying, "Incorrect syntax near keyword 'ON'" Could someone please help? Here is my code: str = "SELECT FAC_REQUEST.*, StateFAC.*, STATUS.sStatus, FAC_TYPE.Facility_Type FROM FAC_TYPE INNER JOIN ((FAC_REQUEST INNER JOIN STATUS ON FAC_REQUEST.iStatusID = STATUS.iStatusID) ON StateFAC.DVN = FAC_REQUEST.DVN) ON FAC_TYPE.Faciltiy_Type = FAC.FacilityType WHERE iRequestID=" & iRequestID Thanks
Hi, When i exceute my report i get the following .. An error occured during local report processing. Query exceuteion failed for dataset 'orders' Incorrect syntax near ')' If i give NULL i get the above error... But if give one or 2 values it works. but If I run the query in my Sql server mgt studio it works fine too and i run in the BIDS or VS2005 it works fine.. but something happens when i generate the reports... ALTER Procedure [dbo].[usp_GetOrdersByOrderDate] @ClientId nvarchar(max)= NULL, @StartDate datetime, @EndDate datetime AS Declare @SQLTEXT nvarchar(max) If @ClientId IS NULL Begin Select o.OrderId, o.OrderDate, o.CreatedByUserId, c.LoginId, o.Quantity, o.RequiredDeliveryDate, cp.PlanId, cp.ClientPlanId FROM [Order] o Inner Join ClientPlan cp on o.PlanId = cp.PlanId Inner Join ClientUser c on o.CreatedByUserId = c.UserId WHERE --cp.ClientId = @ClientId --AND o.OrderDate BETWEEN @StartDate AND @EndDate ORDER BY o.OrderId DESC END ELSE BEGIN SELECT @SQLTEXT = 'Select o.OrderId, o.OrderDate, o.CreatedByUserId, c.LoginId, o.Quantity, o.RequiredDeliveryDate, cp.PlanId, cp.ClientPlanId FROM [Order] o Inner Join ClientPlan cp on o.PlanId = cp.PlanId Inner Join ClientUser c on o.CreatedByUserId = c.UserId WHERE cp.ClientId in (' + @ClientId + ') AND o.OrderDate BETWEEN ' + Convert(varchar,@StartDate) + ' AND ' + convert(varchar, @EndDate) + ' ORDER BY o.OrderId DESC' execute (@SQLTEXT)
Hi! I need some help with this error which I'm unable to understand.
Any help will be highly appreciated.
<Error> Line 1: Incorrect syntax near 'Number'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near 'Number'.
Source Error:
Line 69: Dim da As SqlDataAdapter = New SqlDataAdapter(cmd) Line 70: Dim ds As DataSet = New DataSet Line 71: da.Fill(ds, "Equip") Line 72: Line 73: dgdSearch.DataSource = ds.Tables("Equip").DefaultView
Private Sub butSearch_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles butSearch.Click Dim objConnection As SqlConnection Dim objCommand As SqlCommand Dim objAdapter As SqlDataAdapter Dim objDataReader As SqlDataReader Dim objDataSet As DataSet Dim strSearch As String Dim StrSQLQuery As String 'Dim mySQL As String
'Get Search strSearch = txtSearch.Text
'If there's nothing to search for then don't search ' o/w build our SQL Query execute it. If Len(Trim(strSearch)) > 0 Then 'Set up our connection. Dim strConn As String = ("server=(local);Integrated Security=SSPI;database=Equipment Log")
'-- setup the select command Dim mySQL As String = "Select * From Equip Where " & ddlSearch.SelectedValue.ToString() & " Like '" & txtSearch.Text & " %' Order by DemoNum"
Dim MyConn As New SqlConnection(strConn) '--create the SqlCommand object (a connection would need to be set up too) Dim cmd As SqlCommand = New SqlCommand(mySQL, MyConn) MyConn.Open() '--execute the query and fill a dataset with the results Dim da As SqlDataAdapter = New SqlDataAdapter(cmd) Dim ds As DataSet = New DataSet da.Fill(ds, "Equip")
I am getting the following error when attempting to call a certain function: "Incorrect Syntax near spListPrograms, Line 1" Here is the sproc: ALTER PROCEDURE spListPrograms @parentID int = 0 AS SELECT pwbsID, pwbsTitle FROM ProgramWBS WHERE pwbsParent = @parentID It is being called from this function: Public Shared Function ListProgramChildNodes(Optional ByVal parentID As Integer = 0) As SqlDataReader Dim cmd As New SqlCommand("spListPrograms", strConn) cmd.Parameters.AddWithValue("@parentID", parentID) Try strConn.Open() Return cmd.ExecuteReader(CommandBehavior.CloseConnection)
Catch e As SqlException Dim errorMessages As String = "" Dim i As Integer
For i = 0 To e.Errors.Count - 1 errorMessages += "Index #" & i.ToString() & ControlChars.NewLine _ & "Message: " & e.Errors(i).Message & ControlChars.NewLine _ & "LineNumber: " & e.Errors(i).LineNumber & ControlChars.NewLine _ & "Source: " & e.Errors(i).Source & ControlChars.NewLine _ & "Procedure: " & e.Errors(i).Procedure & ControlChars.NewLine Next i
MsgBox(errorMessages) Finally strConn.Close() End Try End Function
The sproc works just fine when I execute it from the database directly in SQl Express. What could cause an incorrect syntax error? There's hardly any syntax there for an error to occur Thanks for any help you can give me.
hi. i am relatively new to sql. i am wondering how to resolve my "incorrect syntax error" on an IP Address string i am trying to add. the table has IPAddress as data type "text" and length 16 (which won't let me change the length). It seems that sql is looking for a data type with no more than one decimal (money, float, etc). How do i resolve this? thanks in advance. Peter
This is the error it gives me for my code and then it calls out line 102. Line 102 is my buildDD(sql, ddlPernames) When I comment out this line the error goes away, but what I don't get is this is the same way I build all of my dropdown boxes and they all work but this one. Could it not like something in my sql select statement. thanksPrivate Sub DDLUIC_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles DDLUIC.SelectedIndexChanged Dim taskforceID As Byte = ddlTaskForce.SelectedValueDim uic As String = DDLUIC.SelectedValue sql = "select sidstrNAME_IND from CMS.dbo.tblSIDPERS where sidstrSSN_SM in (Select Case u.strSSN from tblAssignedPersonnel as u " _ & "where u.bitPresent = 1 and u.intUICID in (select intUICID from tblUIC where intTaskForceID = " & taskforceID & " and strUIC = '" & uic & "'))"ddlPerNames.Items.Add(New ListItem("", "0")) buildDD(sql, ddlPerNames)
Hi i have the following code in my sql database;CASE dbo.tblWorkSchedule.WorkScheduleType_ID WHEN 1 THENCASE IsNull(dbo.tblSurvey.WorkScheduleOverallStatus_ID,0) WHEN 4 THENdbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate (IsNull(tblRateSchedule.WorkType_ID,0) ,tblWorkSchedule.WorkSchedule_ID , tblSurvey.PropertyYear_ID , tblSurvey.PropertyPeriod_ID ) END I want to add the following lines to it, however it gives me an error "Error 156: Incorrect syntax near the keyword "WHEN". What do i need to do, thank you. WHEN 3 THEN dbo.tblWorkSchedule.UpliftedRate ELSE dbo.GetSWT_PropertyYearPeriodRate (IsNull(tblRateSchedule.WorkType_ID,0) ,tblWorkSchedule.WorkSchedule_ID , tblSurvey.PropertyYear_ID , tblSurvey.PropertyPeriod_ID ) END
Hi, I am building a website and database system for a university project, and am getting an error message when inserting data to a table (error message = "System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'WHERE'."). I would be most grateful if anybody could point out where I am going wrong! My code is; using System; using System.Collections; using System.Configuration; using System.Data; using System.Data.SqlClient; using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; public partial class Default2 : System.Web.UI.Page {protected void Page_Load(object sender, EventArgs e) {if ((Session["sUserName"]) == null) {Response.Redirect("Default.aspx"); } else {Convert.ToString(Session["sUserName"]); } }protected void Register(object sender, EventArgs e) { //Create the ConnectionSqlConnection sqlConn = new SqlConnection("server=Acer-Laptop\SQLEXPRESS; database=NeuCar; Trusted_Connection=true"); //Open the connection sqlConn.Open(); //Create the Command, passing in the SQL statement and the ConnectionString queryString = "INSERT INTO Member (FirstName, LastName, Title, Email, AddressLine1, AddressLine2, TownOrCity, County, Postcode) VALUES(@myFirstName, @myLastName, @myTitle, @myEmail, @myAddressLine1, @myAddressLine2, @myTownOrCity, @myCounty, @myPostcode) WHERE Member (UserName = @myUserName); "; SqlCommand cmd = new SqlCommand(queryString, sqlConn);cmd.Parameters.Add(new SqlParameter("@myUserName", Session["sUserName"])); cmd.Parameters.Add(new SqlParameter("@myFirstName", FirstNameTextBox.Text));cmd.Parameters.Add(new SqlParameter("@myLastName", LastNameTextBox.Text)); cmd.Parameters.Add(new SqlParameter("@myTitle", TitleTextBox.Text));cmd.Parameters.Add(new SqlParameter("@myEmail", ConfirmEmailTextBox.Text)); cmd.Parameters.Add(new SqlParameter("@myAddressLine1", AddressLine1TextBox.Text));cmd.Parameters.Add(new SqlParameter("@myAddressLine2", AddressLine2TextBox.Text)); cmd.Parameters.Add(new SqlParameter("@myTownOrCity", TownOrCityTextBox.Text));cmd.Parameters.Add(new SqlParameter("@myCounty", CountyTextBox.Text));cmd.Parameters.Add(new SqlParameter("@myPostcode", PostcodeTextBox.Text)); cmd.ExecuteNonQuery(); Response.Redirect("Register.aspx"); //Close the connection sqlConn.Close(); } } Also, is this line of code correct for passing a session variable into a parameter?; cmd.Parameters.Add(new SqlParameter("@myUserName", Session["sUserName"])); Many thanks for your time and help! Chima
--------------- Line 1: Incorrect syntax near '='.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Line 1: Incorrect syntax near '='.
Source Error:
Line 40: Dim adpt As New SqlDataAdapter("SELECT * FROM SMS_student_class_master WHERE" & _ Line 41: "stud_id=" & sid, con) Line 42: adpt.Fill(ds, "SMS_student_class_master") Line 43: txt.Text = ds.Tables.Item("roll_no").ToString Line 44: con.Close()
I am moving along but I still get this pesky error. In a field on the user form for comments - when there is a ' character - I get this syntax error. But, I have removed the ' character with this code: fieldname= Replace(Request.Form("fieldname"), "'", " ")
So how do I get rid of this error? Beats me. Anyone know of resources I can read about this?
Thanks in advance...................
Set objConn = Server.CreateObject("ADODB.Connection") Set rs = server.createobject("ADODB.Recordset")
Use test GO ALTER TABLE NAME tablo5 RENAME TO tablo6; GO
but error messages::
Msg 102, Level 15, State 1, Line 1 Incorrect syntax near 'tablo5'. ------------------ ------------------ ----tablo4 d1 ==> d11 change. Use test GO ALTER TABLE tablo4 RENAME COLUMN d1 TO d11; GO
error messages::
Msg 102, Level 15, State 1, Line 1 Incorrect syntax near 'RENAME'
Hey guys, I'm getting this really strange incorrect sytax error with a program I'm writing in VB.NET for an ASP.NET website.
Here is my code:
Dim mySelectQuery2 As String = "SELECT MAX(TicketID) FROM tblTicket"
Dim myInsertQuery As String = "INSERT INTO tblCaller (TicketID)"
Dim myConnection As New Data.SqlClient.SqlConnection(myConnString)
Dim myCommand As New Data.SqlClient.SqlCommand(mySelectQuery2, myConnection)
Dim myCommand2 As New Data.SqlClient.SqlCommand(myInsertQuery, myConnection)
Dim retvalue As Integer
myConnection.Open()
retvalue = myCommand2.ExecuteNonQuery()
Console.WriteLine(retvalue)
Dim myReader2 As Data.SqlClient.SqlDataReader
myReader2 = myCommand.ExecuteReader()
myReader2.Close()
myConnection.Close()
Now, the actual error I'm getting is "Incorrect syntax near ')'." that is refering to the link of code "retvalue = myCommand2.ExecuteNonQuery()". I've played around with the code a little bit but I just can't seem to make that error go away.
My only guess is that in the "myInsertQuery" I should have "VALUE (...", but I'm not sure what to put there.
If anyone could make any suggestions on what I might want to try, or if you think that you need more information please let me know.
When i exceute my report i get the following .. An error occured during local report processing. Query exceuteion failed for dataset 'orders' Incorrect syntax near ')'
If i give NULL i get the above error... But if give one or 2 values it works. but If I run the query in my Sql server mgt studio it works fine too and i run in the BIDS or VS2005 it works fine.. but something happens when i generate the report in preview mode. I am using multivalue parameter This is my sproc
Code Snippet ALTER Procedure [dbo].[usp_GetOrdersByOrderDate]
@StartDate datetime, @EndDate datetime, @ClientId nvarchar(max)= NULL AS Declare @SQLTEXT nvarchar(max) if @ClientId is NULL BEGIN SELECT o.OrderId, o.OrderDate, o.CreatedByUserId, c.LoginId, o.Quantity, o.RequiredDeliveryDate, cp.PlanId, cp.ClientPlanId --c.ClientId FROM [Order] o Inner Join ClientPlan cp on o.PlanId = cp.PlanId and o.CreatedByUserId = cp.UserId Inner Join ClientUser c on o.CreatedByUserId = c.UserId WHERE --cp.ClientId = @ClientId --AND o.OrderDate BETWEEN @StartDate AND @EndDate ORDER BY o.OrderId DESC END ELSE BEGIN SELECT @SQLTEXT = 'Select o.OrderId, o.OrderDate, o.CreatedByUserId, c.LoginId, o.Quantity, o.RequiredDeliveryDate, cp.PlanId, cp.ClientPlanId --cp.ClientId FROM [Order] o Inner Join ClientPlan cp on o.PlanId = cp.PlanId --AND cp.ClientId in ('+ convert(Varchar, @ClientId) + ' ) Inner Join ClientUser c on o.CreatedByUserId = c.UserId WHERE cp.ClientId in (' + convert(Varchar,@ClientId) + ') AND o.OrderDate BETWEEN ''' + Convert(varchar, @StartDate) + ''' AND ''' + convert(varchar, @EndDate) + ''' ORDER BY o.OrderId DESC' exec(@SQLTEXT) END
Hi I am using JDBC driver version "1.0.809.102". In the ms sqlserver 2000 database I am acessing there is a table named as "CDR_DATA_2007-09-12". When I run the following query "select * from CDR_DATA_2007-09-12" i get the following exception. Please help me out to solve this problem.
com.microsoft.sqlserver.jdbc.SQLServerException: Line 1: Incorrect syntax near '-'. at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteStatement(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerStatement$StmtExecCmd.doExecute(Unknown Source) at com.microsoft.sqlserver.jdbc.TDSCommand.execute(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeQuery(Unknown Source) at Test.mssqldb(Test.java:80) at Test.main(Test.java:26) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.intellij.rt.execution.application.AppMain.main(AppMain.java:86)
Hi all My error is as follows: Incorrect syntax near '('.Line 27: acceptOrDeclineFriendship.UpdateParameters.Add("Response", answer)Line 28: acceptOrDeclineFriendship.UpdateParameters.Add("FriendID", friend_id)Line 29: acceptOrDeclineFriendship.Update()Line 30: Line 31: End Sub Bear with me... I have a page where i use a repeater control to list users who have requested to be friends with the currently online user. The 'getFriendRequests' query looks like this: SelectCommand="SELECT * FROM Friends, UserDetails WHERE (Friends.UserID = UserDetails.UserID) AND (FriendID = @UserID) AND (ApprovedByFriend = 'False') ORDER BY Friends.Requested DESC">This works. Within each repeater template, there are 2 buttons, 'Accept' or 'Decline', like this: <asp:Repeater ID="Repeater1" runat="server" DataSourceID="getFriendRequests"> <ItemTemplate> (other stuff like avatar and username etc) <asp:Button ID="accept" runat="server" Text="Accept" commandName="Accept" commandArgument='<%#Eval("UserID")%>' onCommand="Accept_Decline_Friends"/> <asp:Button ID="decline" runat="server" Text="Decline" commandName="Decline" commandArgument='<%#Eval("UserID")%>' onCommand="Accept_Decline_Friends"/> </ItemTemplate> </asp:Repeater> The code-behind (VB) which deals with this is as follows: Protected Sub Accept_Decline_Friends(ByVal sender As Object, ByVal e As CommandEventArgs)
'retrieve id of requestee and the answer accept/decline Dim friend_id As String = e.CommandArgument.ToString Dim answer As String = e.CommandName.ToString
'add the parameters acceptOrDeclineFriendship.UpdateParameters.Add("Response", answer) acceptOrDeclineFriendship.UpdateParameters.Add("FriendID", friend_id) acceptOrDeclineFriendship.Update()
End Sub Since the buttons are being created dynamically, this is how i track 1. the response from the currently logged in user 'Accept/Decline' and 2. who they are responding to (by their uniqueid) This relates to a sqlDataSource on my .aspx page like this: <!---- update query when user has accepted the friendship ----> <asp:SqlDataSource ID="acceptOrDeclineFriendship" runat="server" ConnectionString="<%$ xxx %>" UpdateCommand="UPDATE Friends SET (ApprovedByFriend = @Response) WHERE (FriendID = @UserID) AND (UserID = @FriendID)"> <UpdateParameters> <asp:ControlParameter Name="UserID" ControlID="userIdValue" /> </UpdateParameters> </asp:SqlDataSource> Which is meant to update my 'Friends' table to show that 'ApprovedByFriend' (the logged in user) is either 'Accept' or 'Decline', and record who's request was responded to. I hope this is clear, just trying to suppy all of the information! The error appears to be saying that I have an issue with my code-behind, where i am telling the sqlDataSource above to UPDATE. What I can say is that for each button in the repeater, the 2 variables 'friend_id' and 'answer' are picking up the correct values. Can anyone see any obvious problems here? Any help is very much appreciated as i am well and truley stuck!
I'm stuck. This is in C#. I am making the following query: string query = INSERT INTO region_info(prefix, region, last_update) VALUES ('" + RegionInfo.Prefix + "', '" + region + "', ???TIMESTAMP???);
and then executing query = query.Replace("???TIMESTAMP???", "'" + DateTime.Now.ToString("yyyyMMdd") + "'");
Thus, an example query is: INSERT INTO region_info(prefix, region, last_update) VALUES ('907209', 'Alaska-Juneau', '20040921'); When I execute this query through my program(uses ADO.net), I get a "COUNT field incorrect or syntax error" exception, but if I run this same query through the query analyzer, it works fine.
I have followed the steps from the .NET FW SDK QuickStart Configuration (C:Program FilesMicrosoft Visual Studio 8SDKv2.0SamplesSetuphtmlConfigDetails.htm), and have got an error message trying to grant the ASP.NET User account access to the databases by the command sqlcmd -E -S (local)SQLExpress -Q "sp_grantlogin LEONEWASPNET" where LEONEW is my local machine name, and the ASPNET account exists in the Users group.
I am getting the error message: Msg 102, Level 15, State 1, Server LEONEWSQLEXPRESS, Line 1 Incorrect syntax near ''.
Please help if you know how to resolve this. Thanks in advance.
Hi, Here's the code I've used to try and update a new user's IP Address to a Table called Customer who's key field in the UserId: Getting the Exception Error "Incorrect Syntax near'('. " Any ideas? protected void ContinueButton_Click(object sender, EventArgs e) { //Get the ip address and put it into the customer table - (the instance of this user now exists)
MembershipUser _membershipUser = Membership.GetUser(); //This gets the active user if there is someone logged in... Guid UserId = (Guid)_membershipUser.ProviderUserKey; //This gets the userId for the currently logged in user string IPAddress = Request.UserHostAddress.ToString();//This gets the IPAddress of the currently logged in user string cs = ConfigurationManager.ConnectionStrings["ConnectionString"].ToString(); using (System.Data.SqlClient.SqlConnection con =new System.Data.SqlClient.SqlConnection(cs)) { con.Open(); System.Data.SqlClient.SqlCommand cmd = new System.Data.SqlClient.SqlCommand(); cmd.Connection = con; cmd.CommandType = System.Data.CommandType.Text;
I copied the the following code from a book to the query editor of my SQL Server Management Studio Express (SSMSE): ///--MuCh14spInvTotal3.sql--/// USE AP --AP Database is installed in the SSMSE-- GO CREATE PROC spInvTotal3 @InvTotal money OUTPUT, @DateVar smalldatetime = NULL, @VendorVar varchar(40) = '%' AS
IF @DateVar IS NULL SELECT @DateVar = MIN(InvoiceDate)
SELECT @InvTotal = SUM(InvoiceTotal) FROM Invoices JOIN Vendors WHERE (InvoiceDate >= @DateVar) AND (VendorName LIKE @VendorVar) GO /////////////////////////////////////////////////////////////// Then I executed it and I got the following error: Msg 156, Level 15, State 1, Procedure spInvTotal3, Line 12 Incorrect syntax near the keyword 'WHERE'. I do not know what wrong with it and how to correct this problem.
Following is the stored procedure iam trying to create.Here i am trying to
First create a table with the table name passed as parameter Second I am executing a dynamic sql statement ("SELECT @sql= 'Select * from table") that returns some rows. Third I want to save the rows returned by the dynamic sql statement ("SELECT @sql= 'Select * from table") in the tablei created above.All the columns and datatypes are matching.
This table would be further used with cursor. Now i am getting a syntax error on the last line.Though i doubt whether the last 3 lines will execute properly.Infact how to execute a sp_executesql procedure in another dynamic sql statement.ANy suggestions will be appreciated.
Could someone please help me!!! I am using a multi-value parameter in SQL 2005 reports and am getting the following error message:
An error has occured during report processing. Qiery execution failed for dataset an expression of non-boolean type specified in a context where condition is expected, near ',' Incorrect syntax near keyword else.
The multi-value parameter works when it isn't run in the if, else clause i checked the where clause with a single paramter and it works OK. I don't understand what is causing this problem but I really need to fix it. Here is my query.
if @job_SubRep_ProjNo_param = '0'
Begin select Job_Job_No as job, Job_Job_Name as Job_title, cast(Job_Total_Fee as float) as fee, employee_first_name + ' ' + employee_surname as jl_name, cast(Job_Percent_Complete as float) as percentcomplete, cast(Job_Work_Done as float) as workdone, cast(Job_Invoicing as float) as job_Invoicing, job_WIP, Job_Expenditure as timecost, job_project_no, Job_Profit_Loss, cast(Job_Hours as float) as hours, job_expenses from job_tbl inner join project_tbl on job_project_no = project_no inner join employee_tbl on job_jl_empno = employee_no where project_pl_empno = @pl_employeeNo or job_jl_empno = @jl_subRep
end else select Job_Job_No as job, Job_Job_Name as Job_title, cast(Job_Total_Fee as float) as fee, employee_first_name + ' ' + employee_surname as jl_name, cast(Job_Percent_Complete as float) as percentcomplete, cast(Job_Work_Done as float) as workdone, cast(Job_Invoicing as float) as job_Invoicing, job_WIP, Job_Expenditure as timecost, job_project_no, Job_Profit_Loss, cast(Job_Hours as float) as hours, job_expenses from job_tbl inner join project_tbl on job_project_no = project_no inner join employee_tbl on job_jl_empno = employee_no where job_project_no in (@job_SubRep_ProjNo_param) or job_jl_empno = @jl_subRep
I receive this error message when I try and run my DTS package:
"Error opening datafile: The filename, directory name, or volume label syntax is incorrect."
I set the file name property of the Text File (Source) to a valid file, but when I run the package and it returns the above error message, it sets the file name property to <not displayable>.
Does anyone have any experience with such a problem? If so please help!!! Thanks
I receive this error message when I try and run my DTS package:
"Error opening datafile: The filename, directory name, or volume labe syntax is incorrect."
I set the file name property of the Text File (Source) to a valid file, but when I run the package and it returns the above error message, it sets the file name property to <not displayable>.
Does anyone have any experience with such a problem? If so please help!!! Thanks
