i get this error below my test box what does it mean ,and my server doesnt start and gives error when i restart services
00/12/08 13:31:37.83 kernel SQL Server is starting at priority class 'normal' with dataserver semaphore = 1 (1 CPU detected, SMPStat=0).
00/12/08 13:31:37.84 server LogLRU buffers: 0
00/12/08 13:31:37.84 kernel initdata: no memory for kernel locks
thanks for any advice
ram
Hi,
I am trying to start Sql server, anlysis services and other things through Configuration manager and iam getting time out error every time.
I was able to start and stop earlier. Please suggest a solution. I am using Sql server 2008 Nov CTP on XP machine.
Hi ,
I am trying to connect to Reporting Services through SSMS using the following parameters:
Server_Type: Reporting Services
Server Name : <Server_Name>
Authentication: Windows Authentication
Got the following error message:
TITLE: Connect to Server
------------------------------
Cannot connect to <Server_Name>
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html', but expected 'text/xml'.
The request failed with the error message:
--
<html><head><title>Server Application Error</title></head>
<body>
<h1>Server Application Error</h1>The server has encountered an error while loading an application during the processing of your request.
Please refer to the event log for more detail information. Please contact the server administrator for assistance.</body></html>
--. (Microsoft.SqlServer.Management.UI.RSClient)
Any help would be deeply appreciated,
Thanks a lot for your Time,
Regards,
Sundar
Hello,
I had created a windows service using C#. I set its Startup Type as Automatic but it is not getting started automatically when my System Starts.
When our rep distribution services time-out (several times a day) some dba's just restart the service while others restart the rep job which starts the service. Are there any differences between these two methods? Does restarting the service inherit any changes made to the job's attributes?
Thanks!
Hi ,
Whenever I restart the Server , SQL server service is starting properly, but the agent is showing the green sign in EM ,agent Log also its showing its started. But in EM the jobs are not showing the next run time its showing ( Date and time not available). When I double click the jobs its showing the following error message
Micorsoft SQL - DMO ( ODBC Sql state 42000)
Error 14258 : can not perform this operation while SQL server agent is starting)
FYI :This server contain the databases of SMS too .
Thank you ,
Shaji
I installed SQL Server 2005 a while back and just tried to use the ReportServer recently and ran into a problem.
I tried accessing using http://babby/ReportServer (my report server and db server are both on 'babby') and got an ASP.NET runtime error (which wasn't displayed to me). So next I accessed locally at the server (babby) and got this error:
The current identity (NT AUTHORITYNETWORK SERVICE) does not have write access to 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files'.
I have done some searching on the Internet and there doesn't seem to be much info at all about SSRS 2005. I did found some MSDN info that suggested that NT AUTHORITYNETWORK SERVICE is the correct account to use when running SSRS under Win Server 2003 which I am.
'babby' is a Windows Server 2003 machine running IIS 6.0.
Any ideas?
Hi,
I've Configured the Mirroring using the two machines, I've checked up everything,creation of end points successfully on both the machines, databases are in full recovery mode as well.
while Start Mirroring i'm facing following error :
TITLE: Database Properties
------------------------------
An error occurred while starting mirroring.
------------------------------
ADDITIONAL INFORMATION:
Alter failed for Database 'MIS'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Alter+Database&LinkId=20476
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The server network address "TCP://DBD-P3-01047.macmill.com:5023" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1418&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
and when i'm using the following command :
ALTER DATABASE [mis] SET PARTNER =N'TCP://DBD-P3-01063.macmill.com:5022'
to start mirroring the following error has come up :
The partner server instance name must be distinct from the server instance that manages the database.
The ALTER DATABASE SET PARTNER command failed.
How can i resolve this issue?Help is greatly appreciated!!!!
- Hitesh
I am having a problem in the Business Intelligence Development Studio. When I add and try to edit a Script Task or a Script Component, I click on the Design Script button and get one of two errors. For the Script task I get an error that states:
Cannot show the editor for this task. (Microsoft Visual Studio)
For the Script component I get:
Cannot show Visual Studio for Applications editor. (Microsoft Visual Studio)
For some reason or another it just will not start Visual Studio for Applications. I have uninstalled an re-installed several times. I have also researched and discovered that there is a bug when C# tasks are include in the project. However, this is not the case. Please help!
I installed SQL Server 2005 Integration services on Windows XP machine. Then I went to the SQL Server Configuration Manager and tried to Start the SSIS service. The "Log On As" value is "NT AUTHORITYNetworkService". But I get the follwoing error:
The request failed or the service did not respond in a timely fashion. COnsult the event log or other applicable error logs for details.
Event Log details:
------------------
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I tried running the service using the "Local Service" and the "Local System" accounts also, but am still encountering the same error. What do I do...
SQL agent is using NT login with all permission & agent and sqlserver using the same NT username . SA password has not been changed for more than one year.
The SQL Server agent log is showing "waiting to recover database". What could be the reason ?
------------
Ray Miao at 6/5/2002 8:13:38 AM
Double check with sql service manager. Did you change sa pwd?
------------
Shaji at 6/5/2002 4:36:16 AM
Hi ,
Whenever I restart the Server , SQL server service is starting properly, but the agent is showing the green sign in EM ,agent Log also its showing its started. But in EM the jobs are not showing the next run time its showing ( Date and time not available). When I double click the jobs its showing the following error message
Micorsoft SQL - DMO ( ODBC Sql state 42000)
Error 14258 : can not perform this operation while SQL server agent is starting)
FYI :This server contain the databases of SMS too .
Thank you ,
Shaji
We have SQL 2000 (SP2) , Our SQL server agent showing green light as started from EM , It is succussfully restarting from NT Services too . But When I open the properties of the jobs from EM its gives error message SQL DMO error " SQl Agent is starting , try later " . And in EM Next run Date & Time not available .
MDDB database is accessable & in Log file its recovered fully
Thankx in Advance
Sha
Has anyone ever recieved an error when starting the Management Studio?
"Unhandled excpetion has occurred in a component in your application.
"Input String was not in a correct format"
I click continue and I can still use the manager;however, it gets annoying. The details of the error are very long and too much to add to this thread.
Any ideas?
Hi,
This error comes up immediately after opening:
Unhandled exception has occurred in a component in your application
If you click Continue, the application will ignore this error and attempt to
continue.
Cannot create a stable subkey under a volatile parent key.
It then provides a whole pile of (to the absolute beginner) mumbo-jumbo under a details button.
It does provide the option to continue, whereupon everything appears
normal; however, I consider this rather unwise at my very first opening
of Management Studio Express.
I have created a databse in VB Express (I have completed the Lesson 09
Video) dealing with databinding - I created the application etc with
the video to enhance my learning.
Should this affect it? It's the only database I have created.
This looks to me (my Express illiteracy intact, of course) like the
kind of message one would get after having an error in something
already created or in the process of being created.
What is this? I was going to begin the video tutorials for SQL, but not with this message.
I have only just installed the Express 'suite' a few days ago.
Please keep replies non-jargonistic - absolute beginner.
Fran...
I am receiving the following error when I am trying to start the SQL server.Any help is appreciated.
"An error(1069 service did not start due to logon failure)while performing this service operation on MSSQLserver service"
Thanks.
Hi
Greetings,
I've installed sql server 7.0 on winnt. Later i've changed my system name.
Due to this SQL SERVER is not running and i'm getting the following error.
"Your SQL Server installation is either corrupt or has been tampered with (unkown package id). Please rerun setup.". I've changed my system name back to the original one and sql server is running again.
Is there any way to change my system name and sql server running??
Thanks in advance.
Regards
Anand.
My SQL server is not sarting, Its giving me an error 2140 - An internal Windows NT error occured.
I checked the Microsoft site found an article ran all the options to check if it works but invain.
I am stuck, its a production DB i have to get it up and running in the next hour
Please Help
vIvEk
hi. i'm starting out with SQL server integration with visual studio.i used the data connection wizard on adding a new connection to my sql server. but i have no idea on how to open/access it like the usual way wherein i use:
SqlConnection myConnection = new SqlConnection(connectionstring);
myConnection.Open();
/*queries*/
how do i go about doing these things with the new connection that i made via the connection wizard? thanks in advance
Hi
Since I installed MySQL on my Win Me, MS SQL SErver 7.3 doesnt seem to start. It keeps giving the message " A connection could not be established to Venus Comp -General Newtwork error. Check your network documentation ConnectionOpen (connect())
Please verify SQL Server is running and check your SQL Server registration properties (by right clicking on the Venus Comp node & try again"
But when i right click on the properties, it gives me the same error. I deleted the Venus Comp node. And re-created it by following step by step wizard. After that , when it tried to connect, it gave the same error.
I'm using just Win Me. Im using no network. It used to work well before i Installed mySQL on the my pc.
I do not wish to re-install the SQLServer with the fear of MySql not working.
ANy help regarding this would be appreciated.
THank you very much
Yusuf
Hi,
we have a SQL server 7.0 on windows 2000 m/c,from yesterday onwards suddenly sqlserver agent is not starting,till then it was working fine.
I tried to start SQL server agent manually and i got following message
"[241] Startup error: Unable to initialize error reporting system (reason: The specified module could not be found) "
Then i tried to start from services in controll panel,but i could't.
Then i checked event log ,found following error messages
Application log:
1) "The description for event ID(105) in soure(SQL Server Agent) can not be found.
The Localcomputer may not havethe nessary registry information or message DLL files to
display messagees from a remote computer.The following information is part of the event:
The handle is invalid."
Event ID: 105
Source : SQLServerAgent
Category: Disk
system log:
1)The Sql server agent service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
can any one help me in this matter
Thanks in advance
Ananth
Hi Folks,
Can anyone amongst u solve my problem..When i try to start the Sql Server Agent..i'm given the following error meassage..
Could not start Sql Server Agent.Error 2140.An Internal Windows NT error.
Please help me if anybody can.
Does anyone use PeopleSoft and SQL?
I am doing tape backups with Seagate.
Seagate hangs sometimes.
I am planning on writing a command to shut off SQL server then restart it.
i am having trouble with writing the .BAT File
so far:
--start of bat
NET STOP MSSQLServer
NET STOP SQLExecutive
<<call to backup software>> -- (my problem)
net start server
net start executive
-- end of bat
any help would be appreciated
thanks
marlene
Hi have you guys seen this error when trying to start the sql agent?
SQLServerAgent could not be started (reason: sqlserveragent must be able to connect to sqlserver as sysadmin, but '(unkown)' is not a member of the sysadmin rol.
What is this all about I can start the sql server service with the same account i'm trying to start the agent.
When I am trying to start SQL Server Agent from Enterprise Manager I am getting:
" An Error 5 - (Access Denied) occured while performing this operation on SQLServerAgent. "
No sound explanation found in MSDN library.
How to resolve this matter, is there other than EM methods so start it?
Thanx.
Zaven
Hi
How can we start the SQL Server Agent without having physical acess to the server, I mean i have access to the EM which is installed on another server. How to start the SQL Server Agent , the login i use has sa rights ,
Please help
We just loaded SQL 2005 Standard Edition on a Windows 2000 Server. It will not let us start the Report Server through URL or through the SQL server Studio. The error in Studio is more descriptive so I have included the error text from attempting to start the Reporting Server through Studio using Object Explorer
TITLE: Connect to Server
------------------------------
Cannot connect to VZMET.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<html>
<head>
<title>Configuration Error</title>
<style>
body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
pre {font-family:"Lucida Console";font-size: .9em}
.marker {font-weight: bold; color: black;text-decoration: none;}
.version {color: gray;}
.error {margin-bottom: 10px;}
.expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
</style>
</head>
<body bgcolor="white">
<span><H1>Server Error in '/ReportServer' Application.<hr width=100% size=1 color=silver></H1>
<h2> <i>Configuration Error</i> </h2></span>
<font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
<b> Description: </b>An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
<br><br>
<b> Parser Error Message: </b>An error occurred loading a configuration file: Failed to start monitoring changes to 'M:InetPubwwwrootSAMMSSQL.2Reporting ServicesReportServer' because access is denied.<br><br>
<b>Source Error:</b> <br><br>
<table width=100% bgcolor="#ffffcc">
<tr>
<td>
<code><pre>
[No relevant source lines]</pre></code>
</td>
</tr>
</table>
<br>
<b> Source File: </b> M:InetPubwwwrootSAMMSSQL.2Reporting ServicesReportServerweb.config<b> Line: </b> 0
<br><br>
<hr width=100% size=1 color=silver>
<b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
</font>
</body>
</html>
<!--
[HttpException]: Failed to start monitoring changes to 'M:InetPubwwwrootSAMMSSQL.2Reporting ServicesReportServer' because access is denied.
at System.Web.FileChangesMonitor.FindDirectoryMonitor(String dir, Boolean addIfNotFound, Boolean throwOnError)
at System.Web.FileChangesMonitor.StartMonitoringFile(String alias, FileChangeEventHandler callback)
at System.Web.Configuration.WebConfigurationHost.StartMonitoringStreamForChanges(String streamName, StreamChangeCallback callback)
at System.Configuration.BaseConfigurationRecord.MonitorStream(String configKey, String configSource, String streamname)
at System.Configuration.BaseConfigurationRecord.InitConfigFromFile()
[ConfigurationErrorsException]: An error occurred loading a configuration file: Failed to start monitoring changes to 'M:InetPubwwwrootSAMMSSQL.2Reporting ServicesReportServer' because access is denied. (M:InetPubwwwrootSAMMSSQL.2Reporting ServicesReportServerweb.config)
at System.Configuration.ConfigurationSchemaErrors.ThrowIfErrors(Boolean ignoreLocal)
at System.Configuration.BaseConfigurationRecord.ThrowIfParseErrors(ConfigurationSchemaErrors schemaErrors)
at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey, Boolean getLkg, Boolean checkPermission)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
at System.Web.Configuration.RuntimeConfig.GetSectionObject(String sectionName)
at System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index)
at System.Web.Configuration.RuntimeConfig.get_HealthMonitoring()
at System.Web.Configuration.HealthMonitoringSectionHelper..ctor()
at System.Web.Management.HealthMonitoringManager..ctor()
at System.Web.Management.HealthMonitoringManager.Manager()
at System.Web.Management.WebBaseEvent.RaiseRuntimeError(Exception e, Object source)
at System.Web.HttpResponse.ReportRuntimeError(Exception e, Boolean canThrow, Boolean localExecute)
at System.Web.HttpRuntime.FinishRequest(HttpWorkerRequest wr, HttpContext context, Exception e)
-->
--. (Microsoft.SqlServer.Management.UI.RSClient)
------------------------------
BUTTONS:
OK
------------------------------
Report Abu
I've read that you can run a job on another server as long as you have a link server from the source to the destination server. I've search for hours online and read nearly everything in SQL Server Books Online pertaining to the sp_start_job function without success. I can't find one example on how to accomplish this.
I want to run a job called Job1 on Server1 from Server2 with a link server on Server2 to Server1 called ServerConn. The link server works fine grabbing data from Server1; so I know the link server works.
I am having problems on the server part of the sp_start_job function.
use msdb
exec sp_start_job @job_name = 'Job1', @server_name = 'ServerConn'
I end up with this error: The specified @job_name ('Job1) does not exist.
I don't understand why it is failing or how to fix it.
Any help would be greatly appreciated! Thanks!
Hi,
I would like to access data from SQL database (SQL 2005 express) BEFORE Windows login (actually, the data I want to retrieve is the login name and password for Windows login). Is there a way that I can start the engine before I login?
Thanks in advance
Hello,
I am having trouble just starting SQL Server 2005. When I try to use Management Studio, I do not see any server name. I just need to be able to start it up!
Thanks,
pagates
Hi everyone.
I have a pc running as an SQL Server 2005 express server. Last week, the RAID 1 array failed for some reason, both HD still work correctly and the raid utility simply mirrored everything back.
So after starting this pc the day after, SQL server stopped working. This is the error log:
Code Snippet
2008-02-19 17:37:20.50 Server Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
Apr 14 2006 01:12:25
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition with Advanced Services on Windows NT 5.1 (Build 2600: Service Pack 2)
2008-02-19 17:37:20.50 Server (c) 2005 Microsoft Corporation.
2008-02-19 17:37:20.50 Server All rights reserved.
2008-02-19 17:37:20.50 Server Server process ID is 2676.
2008-02-19 17:37:20.50 Server Logging SQL Server messages in file 'c:Archivos de programaMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2008-02-19 17:37:20.50 Server This instance of SQL Server last reported using a process ID of 2968 at 19/02/2008 17:26:54 (local) 19/02/2008 23:26:54 (UTC). This is an informational message only; no user action is required.
2008-02-19 17:37:20.50 Server Registry startup parameters:
2008-02-19 17:37:20.50 Server -d c:Archivos de programaMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2008-02-19 17:37:20.50 Server -e c:Archivos de programaMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2008-02-19 17:37:20.50 Server -l c:Archivos de programaMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2008-02-19 17:37:20.53 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2008-02-19 17:37:20.53 Server Detected 2 CPUs. This is an informational message; no user action is required.
2008-02-19 17:37:21.20 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2008-02-19 17:37:21.26 Server Database mirroring has been enabled on this instance of SQL Server.
2008-02-19 17:37:21.26 spid5s Starting up database 'master'.
2008-02-19 17:37:21.42 spid5s SQL Trace ID 1 was started by login "sa".
2008-02-19 17:37:21.46 spid5s Starting up database 'mssqlsystemresource'.
2008-02-19 17:37:21.51 spid5s The resource database build version is 9.00.2047. This is an informational message only. No user action is required.
2008-02-19 17:37:21.57 spid5s Error: 9004, Severity: 21, State: 1.
2008-02-19 17:37:21.57 spid5s An error occurred while processing the log for database 'mssqlsystemresource'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
2008-02-19 17:37:21.57 spid5s Error: 945, Severity: 14, State: 2.
2008-02-19 17:37:21.57 spid5s Database 'mssqlsystemresource' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
2008-02-19 17:37:21.57 spid5s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
I have been reading in this forum and other places, but I've had no luck fixing this. I already backed up all the mdf database files and logs just in case. The mssqlsystemresource database and logs are in the same location, and they have read/write access.
Any help would be greatly appreciated
Hi,
View 45 Replies View RelatedHi
I want to start to use SQL Server 200 Express but have no idea where to enter the SQL queries and view the results.
I installed SQL Express and under Start > Programs > SQL Server 2005 I only have Configuration Tools which has Configuration Manager, Error and Usage Reporting and Surface Area Configuration.
SQL Server and SQL Server Browser Services are running but I have no clue of from to start creating my database, tables, etc etc.
I have a background of MySQL and used MySQL's command line tool and phpMyAdmin, so SQL is not a problem.
Thanks
I restarted the sql server after c2 audit was enabled and now i can not start the instance getting this error below. how do i bring the sql server up?
Cannot start C2 audit trace. SQL Server is shutting down. Error = 0x80070003(The system cannot find the path specified.)