Hi,
If this is the syntax to set a property in a package using dtexec:
/set PackageMyForEachLoopMyDataFlow.Disable;False
What is the syntax for setting a global variable in the package?
Thanks
I'm in the process of creating a series of packages to do the ETL for a datawarehouse. As such, I've got quite a few DataFlow tasks scattered through them.
The problem I'm coming across is where the disk that the temp files (created during the processing) are put on is short of space (when compared to some of the data sets I'm copying around and noting that it's the System disk, not the "Data Drive").
To get around this, I found number of article scattered around that suggested using the BufferTempStoragePath property of the DataFlow tasks to redirect the temp files to somewhere else. This works fine for the tasks that I hard-code the new directory.
Noting the number of these tasks that I want to redirect, and also that the Dev environment will be different to the Production environment (and I have no control over the drive letters, paths, etc, in Prod), it was suggested that a package variable be created, assigned to the property and then said variable could be exposed via the Package Configuration file.
That's great as far as it goes, but I just cannot, for some reason, make it work.
The xml in the config file is:
<Configuration ConfiguredType="Property" Path="Package.Variables[::BufferTempStoragePathValue].Properties[Value]" ValueType="String">
<ConfiguredValue>D:Temp</ConfiguredValue>
</Configuration>
The property in the DataFlow task is then set to: @BufferTempStoragePathValue.
When the package is executed, it logs the error message "The buffer manager cannot create a temporary storage file on any path in the BufferTempStoragePath property. There is an incorrect file name or no permission."
My question for the group is two-fold: 1) what am I doing wrong in the setup of the property/variable, and 2) what are the security permissions that are required for the (new) folder.
It's got to be something obvious, I just can't see what!
Many thanks for your assistance.
Cheers,
Mike
Hi all,
I have a serious problem with my SSIS Package while executing using 32-bit DTExec and 64-bit DTExec.
Here are the details:
Environment:
Windows Server 2003 64-bit (Build 3790: Service Pack 2)
SSIS 32-bit & 64-bit installed
SQL Server 2005 (Microsoft SQL Server 2005 - 9.00.1399.06 (X64) - RTM)
SSIS Package details (compiled in 64 bit)
Script tasks only
Microsoft Visual Basic .NET (using TRY...CATCH block)
PreCompileScriptIntoBinaryCode = TRUE
Run64BitRunTime = TRUE
Execution
Batch file that uses DTExec to execute the Package.
SCENARIO
I am trying to exeucte the above SSIS package using both 32-bit and 64-bit DTExec to make it failure by providing invalid connection string. Here are the details,
Wrong connection String using 32-bit Execution
While establishing the connection the error message has been nicely captured in to my Exception block and writes into the log file.
Wrong connection String using 64-bit Execution
While establishing the connection the error has not been catpured anywhere (although I have TRY CATCH block) and it haults there itself with the message "Process is terminated due to StackOverflowException". Later I found that the error is due to the connection string along with the unhandled exception.
Please suggest any one of the following my findings, also if you have any other advice would be very much appreciated.
1. Shall I go ahead and fix the issue by handling those unhandled errors? (e.g Appdomain, application). I tried several but still not working using 64-bit DTExec.
2. Shall I go ahead and use 32-bit DTExec to execute the package? If so, is there any other major issue...like performance or anyother bug?
P.S: We cannot apply any service pack for SQL Server 2005 at the moment. Sorry abt it. If you have any specific hotfix for DTExec (without affecting SQL Server) then we can decide.
Sorry for the lengthy one and Thanks very much for you help in advance .
Thanks again!
Suresh
I am attempting to execute a pckg using DTEXEC. I need to set a package
variable to the text value "SQLAgent". This variable, 'Caller', is scoped
for the package itself. This is the command stmt:
dtexec /DTS "MSDBPATHPCKGNAME" /SERVER SERVERNAME /SET
Package.Variables[User::Caller].Properties[Value];SQLAgent
I am receiving the following message when I execute this from cmdshell.
What am I doing wrong when trying to set the variable??
Message
Executed as user: SERVERNAMESYSTEM. Microsoft (R) SQL Server Execute
Package Utility Version 9.00.1399.06 for 32-bit Copyright (C) Microsoft
Corp 1984-2005. All rights reserved. Started: 12:53:54 PM Warning:
2006-06-16 12:53:55.04 Code: 0x80012017 Source: PCKGNAME
Description: The package path referenced an object that cannot be found:
"Package.Variables[User::Caller].Properties[Value]". This occurs when an
attempt is made to resolve a package path to an object that cannot be found.
End Warning DTExec: Could not set
Package.Variables[User::Caller].Properties[Value] value to SQLAgent.
Started: 12:53:54 PM Finished: 12:53:55 PM Elapsed: 0.125 seconds.
Process Exit Code 1. The step failed.
Thanks.
Hi pals,
I am new to SSIS.I am getting a problem while setting the global parameters.
I created a package with a single task i.e an Execute SQL task.The associated sql is
"delete from src_emp where deptno=?" and i added a new user defined variable as "dno" i.e "user:no"
which of String type with scope=<package name>.The name of my package is "test.dtsx" which is a Structured File
save in my d: directory. I harded code the value in SSIS package desiner i.e in BIDS and tested the functionality,
it is working fine. But when i remove the hard coded value and when i tried to call the dts package using the command line
utility DTExec, i am getting. Below are the different ways i tried to set the global parameters.
trial 1:
---------
D:>dtexec /f test.dtsx /SET "Package.Variables[User:no].Properties[value]";"20"
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 11:06:51 AM
Warning: 2007-07-31 11:06:53.00
Code: 0x80012017
Source: Aug
Description: The package path referenced an object that cannot be found: "Package.Variables[User:no].Properties[value]".
This occurs when an attempt is made to resolve a package path to an object that cannot be found.
End Warning
DTExec: Could not set Package.Variables[User:no].Properties[value] value to 20.
Started: 11:06:51 AM
Finished: 11:06:53 AM
Elapsed: 1.094 seconds
trial 2:
---------
D:>dtexec /f test.dtsx /SET "Package.Variables[User:no].value";"20"
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 11:08:04 AM
Warning: 2007-07-31 11:08:05.99
Code: 0x80012017
Source: Aug
Description: The package path referenced an object that cannot be found: "Package.Variables[User:no].value". This occurs
when an attempt is made to resolve a package path to an object that cannot be found.
End Warning
DTExec: Could not set Package.Variables[User:no].value value to 20.
Started: 11:08:04 AM
Finished: 11:08:05 AM
Elapsed: 1.078 seconds
trial 3:
---------
D:>dtexec /f test.dtsx /SET "PackageExecute SQLTask.Variables[User:no].value";"20"
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 11:09:56 AM
Warning: 2007-07-31 11:09:57.58
Code: 0x80012017
Source: Aug
Description: The package path referenced an object that cannot be found: "PackageExecute SQLTask.Variables[User:no].val
ue". This occurs when an attempt is made to resolve a package path to an object that cannot be found.
End Warning
DTExec: Could not set PackageExecute SQLTask.Variables[User:no].value value to 20.
Started: 11:09:56 AM
Finished: 11:09:57 AM
Elapsed: 1.062 seconds
Any suggestions would be appreciated.
Thanks and Regards,
Manu
Hi there.
I'd like to call dtexec with something like this:
dtexec /f myPackage.dtsx /Set package.variables[User::connStr].Value;Source=localhost;Provider=blah;Integrated Security=SSPI;
I get an error along the lines of
Option "Source=localhost;Provider=blah;Integrated" is not valid".
How do I pass in a property containing spaces? I've tried all of the usual quote-encasing patterns I can think of.
Thanks,
Jon
Hi,
I have a package which has 2 file system tasks and 2 data flow tasks all in a for each loop container. if i execute the package from the development studio its executes fine but when i try to run it from the command prompt using the dtexec utility..it just runs upto the first data flow task and then it hangs unexpectedly.
Any help on this would be really appreciated.
Thanks
Aashna
Hi,
I am running my package in this way:
exec xp_cmdshell 'dtexec /SQL "SBLoadExcelDBLog" /SERVER test /USER **** /PASSWORD ***** /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
/LOGGER "{6AA833A1-E4B2-4431-831B-DE695049DC61}";"Test.SuperBowl"
/Set Package.Variables[User::varExcelFileName].Properties[Value];"aaab"
/Set Package.Variables[User::varExcelWorkbookName].Value;"Sheet1$"
/Set Package.Variables[User::varExcelFileFullPath].Value;"D: estshareaaab.xls"
/Set Package.Variables[User::varDestinationTableName].Value;"FeaturesTmp"
/Set Package.Variables[User::varPreSQLAction].Value;"delete from FeaturesTmp" '
I got errors:
Started: 3:49:51 PM
Progress: 2006-01-30 15:49:52.34
Source: Extract AdHoc Data from Excel
Validating: 0% complete
End Progress
Error: 2006-01-30 15:49:52.46
Code: 0xC0202009
Source: Extract AdHoc Data from Excel Excel Source [649]
Description: An OLE DB error has occurred. Error code: 0x80040E37.
End Error
Error: 2006-01-30 15:49:52.46
Code: 0xC02020E8
Source: Extract AdHoc Data from Excel Excel Source [649]
Description: Opening a rowset for "Sheet1$" failed. Check that the object exists in the database.
End Error
Error: 2006-01-30 15:49:52.51
Code: 0xC004706B
Source: Extract AdHoc Data from Excel DTS.Pipeline
Description: "component "Excel Source" (649)" failed validation and returned validation status "VS_ISBROKEN".
End Error
Progress: 2006-01-30 15:49:52.51
Source: Extract AdHoc Data from Excel
Validating: 25% complete
End Progress
Error: 2006-01-30 15:49:52.51
Code: 0xC004700C
Source: Extract AdHoc Data from Excel DTS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2006-01-30 15:49:52.51
Code: 0xC0024107
Source: Extract AdHoc Data from Excel
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 3:49:51 PM
Finished: 3:49:52 PM
Elapsed: 0.703 seconds
Hi,
when I run the following from the command prompt I am getting an error saying that can not set the variable Status as int.
dtexec /File "C:workSSIS PackagesDataflowControlRoom.dtsx" /SET
Package.Variables[ChannelCode].Value;"test" /SET
Package.Variables[Status].Value;1
both variables as you can see are in the top level.
the problem is that ChannelCode is string but Status is Integer.
if I take out the /SET Package.Variables[Status].Value;1 part from the command line it will work fine. I think th eproblem is down to diffenrt types of variable as there are two types of String and Interger.
any ideas on what the problem migth be.
p.s. I am runnning SQL server 2005 Dev edition (without any SP)
Cheers
I created a package and stored in SQL server.
I am running it as follows
master.dbo.xp_cmdshell dtexec /sq "ABC DEF GHI" /ser "Prod"
ABC DEF GHI --> is my package name.
When i run this from a job, it runs without error
but when i run the above sql i am getting error as
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near '/'.
Am i missing some thing, please advice. Is that the problem between spaces in the package name?
I am getting an invalid cast specification when I call dtexec and try to /SET a user variable within the package that is defined as a string data type. Is there any solution to this? I have tried passing the GUID with {} w/o {} w/ '' w/ "" etc.. many variations... and still get an invalid cast specification. Is there a data type that I need to set the User variable to besides String? The User Variable is used to Select records from a SQL data source where the GUID is stored. I do not have an option of GUID data type for a User Variable.
Thanks for any help! Aaron B.
Hi everybody.
I'm trying to run a package, stored in MSDB, using dtexec utility from cmd.
I do this using "dtexec /sq Main_Package /ser local /user sa /Password Oracle"
But all I got is:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 12:14:15
Could not load package "Main_Package" because of error 0xC0014062.
Description: The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed.
Source:
Started: 12:14:15
Finished: 12:14:34
Elapsed: 18.297 seconds
It runs perfectly from "Integration Services" directly(SQL Management Studio), but not from cmd.
I tried to run it withuot login and password, the same result
Any ideas?
Thanks.
Hi,
I have a file-deployed package which I need to call N times at once using DTEXEC. When I attempt to execute N instances of the package, the second instance doesn't execute. I can execute different packages at the same time, but never the same package more than once. Does anyone know how to get this scenario working? Just to clarify a bit more - I can call the package as many times as I like as long as I wait until the previous run of DTEXEC is finished. Please help!
Thanks,
dcb99
I am executing a package via vb.net with package.execute using the IDTSEvents interface inheriting DefaultEvents. I am trying to emulate DTExec functionality. The package runs fine and I am catching events, but I don't get nearly as many info and progress events as are put out by DTExec. From my understanding DTExec also used the managedDTS application object, is that not the case? If it uses this does anyone have an ideas on how it is grabbing more events? For example I don't get these events that DTExec shows ..
Info: 2006-09-26 14:22:27.97
Code: 0x40016041
Source: DWB02130
Description: The package is attempting to configure from the XML file "D:SSISConfigurationsDatabase.dtsConfig".
End Info
Info: 2006-09-26 14:22:28.05
Code: 0x40016040
Source: DWB02130
Description: The package is attempting to configure from SQL Server using the configuration string ""Configurations Database";"[dbo].[SSISConfigurations]";"DWB02130";".
End Info
I also don't get as many progress updates during validation, I basically get 0 and 100% while DTExec shows several 1%, 3%, 10%, etc.
Any help is greatly appriciated.
Thanks!
Harry
Hi all,
Here's is the situation :
I have a script component that uses the aspnet membership provider to create users from a csv file in an aspnetdb database. In my Business Intelligence Developpement Studio (BIDS) everything works well. I added the aspnet membership provider in DtsDebugHost.exe.config and when I run the package from the BIDS it does what it have to do.
The problems begin when I deploy the package in file system as well as in sql server. When I run it doesn't use the DTExec.exe.config to find where are added the membership provider.
If I refer to that post : http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=541086&SiteID=1
When I run the package from SQL Server it should use the DTExec.exe.config as an app.config for my script component. But it doesn't use it at all and stop with an error that have nothing to do with that. I'm sure that it doesn't use because even when I have a wrong DTExec.exe.config it shows the same error.
If some one knows something about that it will be really great. I need to force my package when it's in stored packages to use one of the *.config as an app.config file.
Hoep it's clear
Thanks in advance for all help
It looks like you can run an SSIS package via the DTEXEC command. You can also specifiy a configuraiton file flag on the command. Is there anyway to specify a configuraiton filter if you stored it into a table vs and xml file?
View 1 Replies View Relatedthanks in advance
Hi, I am web developer. But for the last few weeks i have been working on SQL2005. I actually exported data from a table (SQL 2000) into the Excel sheet and then i have been trying to import data from Excel sheet into another table(SQL 2005). For this i had created SSIS package successfully. I had added this into integration services project(MicroSoft). After pressing CTRL+F5. I am repeatedly getting the following error
DTExec:The Package Execution returned DTSER_FAILURE<1>
Please help me because requirement is urgent.
Hello,
I'm having an odd issue trying to run an SSIS package on a 64 Bit SQL 2005 SP2 (build 3042) Windows 2003 SP2 64 bit AMD Cluster. I have to use the dtexec cmd line utility from SQL Server Agent because I need to connect to an Access database. When running the package from dtexec, it doesn't seem to be able to load the package, i keep getting this error:
Executed as user: USSI-CORPsql02admin. ...00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:56:00 PM Error: 2008-03-03 13:56:01.28 Code: 0xC0010018 Source: {DFBF51D9-DF81-41B9-9370-9DFC68E28FBA} Description: Error loading value "<DTSropertyExpression xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:Name="Subject">@[User::vString]</DTSropertyExpression>" from node "DTSropertyExpression". End Error Error: 2008-03-03 13:56:01.28 Code: 0xC0010018 Source: {DFBF51D9-DF81-41B9-9370-9DFC68E28FBA} Description: Error loading a task. The contact information for the task is "Send Mail Task; Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails. End Error Error: 2008-03-03 13:56:01.53 Code: 0xC001000E Source: TestMsgBox Description: The connection... Process Exit Code 1. The step failed.
The @[User::vString is a string variable in the package, and this particular package is actually just using the SendMail task without using an Access DB, as i'm trying to just get the dtexec utility to work. I believe i'm either doing something wrong or have found a bug, as i've used this in the past at another company without any issue.
Here's the cmd line that I'm using (I'm using the 32 bit version of dtexec):
E:Progra~1Micros~190DTSBinndtexec.exe /SQL "TestMsgBox" /SERVER D1PSQL02V /CHECKPOINTING OFF /REPORTING EW
The version of the dtexec file is: 2005.90.3042.0
Any help would be greatly appreciated.
Andy
Hello,
I want execute package with SQL Server Agent. I create a job and I try all the solutions : my job doesn't want to work.
I success to launch the package but the execution failed.
I try the same job launching from the server : it doesn't work either.
So, I copy the command line (/FILE, /DTS or /SQL) and with DTEXEC utility it works when this command is executed on the server (on a client computer, the problem "the product level is insufficient" appears).
Why is it working with this utility and not with a job ?
I try to change every secured option (credential --> proxy --> Run as ; change the owner of the job ; etc.)
What options must be checked and modified ?
Thanks for your help !
Hi,
We have a problem with visual studio. It hangs when i use the "execute package" option. New packages are running correctly but the packages which i've already built are not executing anymore...Any ideas to get things on track again?
Gr,
Hennie
I am finishing a port of a project that was done with RS2000/AS2000/DTS2000. The cube process is triggered remotely by a Korn Shell script from Services for Unix that runs a DTS package:
dtsrun.exe /S "$ANALYSIS_SERVICES_HOST" /U "$ANALYSIS_SERVICES_USER" /P "$ANALYSIS_SERVICES_PASSWORD" /N "$PACKAGE_NAME"
I have finished porting the AS and RS parts to their 2005 equivalents and now I am trying to get the cube processing converted. I have built a SSIS package that processes the cube and I have deployed it to the SQL Server in MSDB. When I am logged on to the SQL Server box directly, I can execute the package via the Management Studio and from the command line via:
dtexec /Ser "$ANALYSIS_SERVICES_HOST" /DT "$PACKAGE_PATH_NAME"
When I try to register the SQL Server in Integration Services from my client PC Management Studio it fails with "Access Denied". When I try to run the dtexec from my client PC it fails with "Access Denied".
I have walked through Kirk Haselden's instructions at:
http://sqljunkies.com/WebLog/knight_reign/archive/2006/01/05/17769.aspx
(adding myself to Distributed COM Users, noting the correct DCom Config settings for MsDtsServer and restarting the Integration Services service) and the problem is still not resolved. I have posted to the DTS group on Technet and now I am posting here. This can not be run scheduled by SQL Agent as it needs to be triggered by other load/postload activities. Are there any other fixes for this problem that I can try?
Thanks,
Keehan
By the way, being able to have all the parts of this project in one dev environment is great. The previous application was developed in 3 separate locations which was pretty clunky.
Hi All,
I developed my package in BI studio and tested runnning it through BI. Now when i have to deploy the package to main server it will be executed via batch job. This package requires an input file name too.
Now when i am trying to run the package on my loacal box using following command on command prormpt i get error given below.
COMMAND USED BY ME: DTExec /FILE 'C:ProjectIntegrationServicesSFRIntegrationServicesinpkgSFRLocation.dtsx' /SET Package.Variables[InputParamFileName].Value;'C:DataDumpInputLOC00022'
ERROR MESSAGE:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 1:29:54 PM
Error: 2008-02-22 13:29:54.96
Code: 0xC0011007
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Unable to load the package as XML because of package does not ha
ve a valid XML format. A specific XML parser error will be posted.
End Error
Error: 2008-02-22 13:29:54.96
Code: 0xC0011002
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Description: Failed to open package file "'C:ProjectIntegrationServicesSFR
IntegrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The speci
fied path is invalid.". This happens when loading a package and the file cannot
be opened or loaded correctly into the XML document. This can be the result of
either providing an incorrect file name was specified when calling LoadPackage o
r the XML file was specified and has an incorrect format.
End Error
Could not load package "'C:ProjectIntegrationServicesSFRIntegrationServices
inpkgSFRLocation.dtsx'" because of error 0xC0011002.
Description: Failed to open package file "'C:ProjectIntegrationServicesSFRInt
egrationServicesinpkgSFRLocation.dtsx'" due to error 0x800700A1 "The specifie
d path is invalid.". This happens when loading a package and the file cannot be
opened or loaded correctly into the XML document. This can be the result of eit
her providing an incorrect file name was specified when calling LoadPackage or t
he XML file was specified and has an incorrect format.
Source: {9B1FAA88-A6FA-44CF-A2E2-DB3F737FDA65}
Started: 1:29:54 PM
Finished: 1:29:54 PM
Elapsed: 0.047 seconds
PLease let me know solution to creating batch job for executing this pkg with input param.
hi!
i am trying to execute through command line the following:
dtexecui /SQL "ArchiveMain" /SERVER "SE413695AASQL2005" /WARNASERROR /MAXCONCURRENT " -1 " /CHECKPOINTING OFF
I am actaully creating an archiving package.
1. All it does is get some data from the Table.
2. creating directory and set usedirectoryifexist = true
shows some warning when i run that directory already exists cos i don't want to create new one i want to use the existing one.
3. actual archiving to get call to another package for archiving - warning while running the package that parent variable is missing
The pacakge seems to run while i execute it thorugh command prompt but i get this message
DTExec: The package execution returned DTSER_SUCCESS (0) but had warnings, with
warnings being treated as errors!
Thanks,
Jas
I have a package that executes fine in BIDS. However, when calling it using xp_cmdshell it cannot find the path to the source flat file. Anyone have any suggestions?
Here is the statement:
xp_cmdshell 'dtexec /SQ NatlAcctsImport /SER CR1-SQL-01 /CONN SourceConnectionFlatFile;Q:BINATNLACCTS'
Here is the result:
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
NULL
Started: 9:50:56 AM
Progress: 2006-02-10 09:50:57.40
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-02-10 09:50:57.40
Source: Data Flow Task
Validating: 50% complete
End Progress
Progress: 2006-02-10 09:50:57.42
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Validating: 50% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Prepare for Execute: 0% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Prepare for Execute: 50% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Prepare for Execute: 100% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Pre-Execute: 0% complete
End Progress
Warning: 2006-02-10 09:50:57.43
Code: 0x80070003
Source: Data Flow Task Source - NATNLACCTS [1]
Description: The system cannot find the path specified.
End Warning
Error: 2006-02-10 09:50:57.43
Code: 0xC020200E
Source: Data Flow Task Source - NATNLACCTS [1]
Description: Cannot open the datafile "Q:BINATNLACCTS".
End Error
Error: 2006-02-10 09:50:57.43
Code: 0xC004701A
Source: Data Flow Task DTS.Pipeline
Description: component "Source - NATNLACCTS" (1) failed the pre-execute phase and returned error code 0xC020200E.
End Error
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Pre-Execute: 50% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Cleanup: 0% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Cleanup: 50% complete
End Progress
Progress: 2006-02-10 09:50:57.43
Source: Data Flow Task
Cleanup: 100% complete
End Progress
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 9:50:56 AM
Finished: 9:50:57 AM
Elapsed: 0.985 seconds
NULL
ok, I am on Day 2 of being brain dead.I have a database with a table with 2 varchar(25) columns I have a btton click event that gets the value of the userName, and a text box.I NEED to insert a new row in a sql database, with the 2 variables.Ive used a sqldatasource object, and tried to midify the insert parameters, tried to set it at the button click event, and NOTHING is working. Anyone have a good source for sql 101/ASP.Net/Braindead where I can find this out, or better yet, give me an example. this is what I got <%@ Page Language="C#" %><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><script runat="server"> protected void runit_Click(object sender, EventArgs e) { //SqlDataSource ID = "InsertExtraInfo".Insert(); //SqlDataSource1.Insert(); } protected void Button1_Click1(object sender, EventArgs e) { SqlDataSource newsql; newsql.InsertParameters.Add("@name", "Dan"); newsql.InsertParameters.Add("@color", "rose"); String t_c = "purple"; string tempname = Page.User.Identity.Name; Label1.Text = tempname; Label2.Text = t_c; newsql.Insert(); }</script><html xmlns="http://www.w3.org/1999/xhtml" ><head runat="server"> <title>mini update</title></head><body> <form id="form1" runat="server"> name<asp:TextBox ID="name" runat="server" OnTextChanged="TextBox2_TextChanged"></asp:TextBox><br /> color <asp:TextBox ID="color" runat="server"></asp:TextBox><br /> <br /> <asp:Button ID="Button1" runat="server" OnClick="Button1_Click1" Text="Button" /> <br /> set lable =><asp:Label ID="Label1" runat="server" Text="Label" Width="135px" Visible="False"></asp:Label><br /> Lable 2 => <asp:Label ID="Label2" runat="server" Text="Label"></asp:Label><br /> Usernmae=><asp:LoginName ID="LoginName1" runat="server" /> <br /> <br /> <br /> <br /> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConflictDetection="CompareAllValues" ConnectionString="<%$ ConnectionStrings:newstring %>" DeleteCommand="DELETE FROM [favcolor] WHERE [name] = @original_name AND [color] = @original_color" InsertCommand="INSERT INTO [favcolor] ([name], [color]) VALUES (@name, @color)" OldValuesParameterFormatString="original_{0}" SelectCommand="SELECT [name], [color] FROM [favcolor]" UpdateCommand="UPDATE [favcolor] SET [color] = @color WHERE [name] = @original_name AND [color] = @original_color"> <DeleteParameters> <asp:Parameter Name="original_name" Type="String" /> <asp:Parameter Name="original_color" Type="String" /> </DeleteParameters> <UpdateParameters> <asp:Parameter Name="color" Type="String" /> <asp:Parameter Name="original_name" Type="String" /> <asp:Parameter Name="original_color" Type="String" /> </UpdateParameters> <InsertParameters> <asp:InsertParameter("@name", "Dan", Type="String" /> <asp:InsertParameter("@color", "rose") Type="String"/> </InsertParameters> </asp:SqlDataSource> <asp:GridView ID="GridView1" runat="server" AllowPaging="True" AllowSorting="True" AutoGenerateColumns="False" DataKeyNames="name" DataSourceID="SqlDataSource1"> <Columns> <asp:CommandField ShowDeleteButton="True" ShowEditButton="True" ShowSelectButton="True" /> <asp:BoundField DataField="color" HeaderText="color" SortExpression="color" /> <asp:BoundField DataField="name" HeaderText="name" ReadOnly="True" SortExpression="name" /> </Columns> </asp:GridView> </form></body></html>
View 1 Replies View RelatedI am using execute pacakge task to execute another package . I am giving the Connection string for the package to execute. It works fine in my development machine but when i try to run in another server after i deployed it. It looks for the datasource path of the DTSX file in the same location.
how do i set the path according to each server where the dtsx file is stored. or any other method of storing it like connection string.
if i store it in theparent package variable where should i point to...
thanks
aa
Hi,
I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
pkgFile.Variables["User::DestinationServerName"].Value = <myvalue>
Deploy the package as follows:
applnObj.SaveToSqlServer(pkgFile, null,
destinationServer, null, null);
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:
Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.
Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?
Thanks,
Sandhya
Running eval. edition of Sql Server Standard 2005. "Insufficient product level" error is thrown during validation phase of an OleDBCommand data flow task. This task type is not licensed in Sql Server 2005 standard? The component runs a very simple sql update statement against a one row table in Sql Server 2005.
If it works from BIDS, should it not work from dtexec.exe on the same box?
Does dtexec run under the security context of the logged in user?
Thanks,
Ken
I have this problem executing an SSIS pkg using dtexec.
dtexec /f d:smappsssis_pkgsdts_SOAR.dtsx /REP E
Code Snippet
Started: 10:28:58 PMEnd Error
Error: 2008-03-03 22:28:59.00
Code: 0xC0202009
Source: dts_SOAR Connection manager "SourceConnectionExcel"
Description: An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2008-03-03 22:28:59.00
Code: 0xC020801C
Source: Data Flow Task Source - CHANNEL_DATA [1]
Description: The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code 0xC0202009.
Code Snippet
However, it runs fine when I double click the package and execute it using the Execute package utility. That really puzzles me.
The package transfers data from worksheets in excel to SQL Server 2005 DB.
Both source and destination are on the same system.
Please advise.
I'm working on an SSIS package that uses a vb.net script to grab some XML from a webservice (I'd explain why I'm not using a web service task here, but I'd just get angry), and I wish to then assign the XML string to a package variable which then gets sent along to a DataFlow Task that contains an XML Source that points at said variable. when I copy the XML string into the variable value in the script, if do a quickwatch on the variable (as in Dts.Variable("MyXML").value) it looks as though the new value has been copied to the variable, but when I step out of that task and look at the package explorer the variable is its original value.
I think the problem is that the dataflow XML source has a lock on the variable and so the script task isn't affecting it. Does anyone have any experience with this kind of problem, or know a workaround?
sry im an idiotbut how do u take like "SELECTbla FROM blar WHERE blam=blfda" and make the thing it "selects" into a variable thnx
View 5 Replies View RelatedHi, I have this query basically im trying to set the @db to the current database depending on the quarter. This will be used in a package to change the database that the package will use.
DECLARE @db nVarchar(4000)
SET @db = N'TESTDB' + RIGHT(DATEPART(yy, GETDATE()), 2) + '_' + CASE WHEN DATEPART(m, GETDATE()) IN ('11', '12', '1')
THEN 'Q1' ELSE CASE WHEN DATEPART(m, GETDATE()) IN ('2', '3', '4') THEN 'Q2' ELSE CASE WHEN DATEPART(m, GETDATE()) IN ('5', '6', '7')
THEN 'Q3' ELSE CASE WHEN DATEPART(m, GETDATE()) IN ('8', '9', '10')
THEN 'Q4' END END END END
EXECUTE sp_executesql @db, N'@level tinyint', @level = 35
I get the error Incorrect Syntax near 'TESTDB04_Q3'.
hi !
I am trying to set the variables value through Execute SQL task and create directory through the FileSystemTask by setting the user variable as source. The User variable has the Directory path to create the directory, but when i set the source as the user variable it complains that its value is empty.
Execute SQL TAsk happens to work correctly when i check the watch window the user variable is set correctly . but value is not setting in the SSIS/Variable window Value.
What is wrong an what method should i use to set the variables value to create directory.
Thanks,
aaks