Several Delete Statements In One SP
Mar 11, 2008I would like to run more than 100 delete statements from a database.
is it possible to use all delete statements in one single stored procedure.
Thanks.
ADVERTISEMENT
Delete Statements Without Log Filling Up
Aug 13, 2002I have a database that I am splitting the data using odd account numbers and even account numbers. The odd acct numbers in one database and the even in the other database.
This database is very large. The problem is when I run the delete statements
it is going to fill up the log files. Can I turn on the "Simple" mode on the database while I am deleteing the data. Will this cause a problem? Then can I turn back on the 'Full' mode when I have finished?
Has anyone ever done this and so how did it work. Or better yet is it possible?
Thanks,
Dianne
Audit Delete Statements
Sep 21, 2007Hi
I was curious whether it's possible to audit DELETE statements in the MS SQL database. I created a procedure (below), but I didn't find any event associated with DELETE statements.
Any help will be greatly appreciated!
Thanks,
Alla
CREATE proc sp_Turn_Audit_On
as
/************************************************** **/
/* Created by: SQL Profiler */
/* Date: 11/15/2006 05:16:40 PM */
/************************************************** **/
-- Create a Queue
declare @rc int
declare @TraceID int
declare @maxfilesize bigint
declare @StatusMsg varchar
declare @ServerTraceFile varchar
set @ServerTraceFile = 'E:Program FilesMicrosoft SQL ServerMSSQLTraceAudit_Info'
set @maxfilesize = 1024
-- Client side File and Table cannot be scripted
-- Set the events
declare @on bit
set @on = 1
exec @rc = sp_trace_create @TraceID OUTPUT, 0, N'\hostnamedbauditlogmy_dir', @maxfilesize, NULL
print @TraceID
if (@rc != 0) goto error
exec sp_trace_setevent @TraceID, 14, 1, @on
exec sp_trace_setevent @TraceID, 14, 6, @on
exec sp_trace_setevent @TraceID, 14, 9, @on
exec sp_trace_setevent @TraceID, 14, 10, @on
exec sp_trace_setevent @TraceID, 14, 11, @on
exec sp_trace_setevent @TraceID, 14, 12, @on
exec sp_trace_setevent @TraceID, 14, 13, @on
exec sp_trace_setevent @TraceID, 14, 14, @on
exec sp_trace_setevent @TraceID, 14, 16, @on
exec sp_trace_setevent @TraceID, 14, 17, @on
exec sp_trace_setevent @TraceID, 14, 18, @on
-- Set the Filters
declare @intfilter int
declare @bigintfilter bigint
exec sp_trace_setfilter @TraceID, 10, 0, 7, N'SQL Profiler'
-- Set the trace status to start
exec sp_trace_setstatus @TraceID, 1
--SELECT @StatusMsg = 'sp_trace_setstatus' + ' Error - ' + @TraceID
-- display trace id for future references
select TraceID=@TraceID
goto noCursor
error:
select ErrorCode=@rc
noCursor:
return
GO
exec sp_procoption N'sp_Turn_Audit_On', N'startup', N'true'
GO
What Does Do Not Replicate DELETE Statements Do?
Dec 1, 2006I'm trying to find information and/or articles on what exactly "Do not replicate DELETE statements" does in transactional replication. How does this affect the Publisher, Distributor, and Subscriber? Does information deleted on the publisher not replicate to the subscriber? What scenarios would someone use this option on a article?
Sorry noob to replication and SQL 2005....
Delete Statements In Partitioned Views
Dec 10, 2002Hi, I am using sql2000 ent edition. I have a partitioned view based on 8 tables. My selects and inserts are fine. But, when I run a delete on the view based on a query on the paritioned column, I get a "Transaction (Process ID 149) was deadlocked and has been chosen as a victim".
I looked at the query plan and it was showing a parallel query on all the underlying tables. So, I put the Option(maxdop 1), using only one processor and the delete worked fine.
Does anybody know why? is parallel query create deadlocks? is there any known problems with deletes on partitioned views?
same question for updates. I think I have the same problem for updates.
Any help will be useful.
thanks!!
Combining DELETE And JOIN Statements
Nov 20, 2006In SQL Server 2000/2005 (not CE) I can use the following T-SQL statement to delete orphaned rows from a table:
DELETE GroupsMembers FROM GroupsMembers LEFT OUTER JOIN Groups ON GroupsMembers.GroupID = Groups.ID WHERE Groups.ID IS NULL
SQL Server CE does not seem to support combining the JOIN statement with the DELETE statement. Is this correct? If yes, is there any alternative statement that could be used to accomplish the same thing?
Gerrit
Additional INSERT, UPDATE, And DELETE Statements Disabled.
Apr 21, 2007Hi, I just want you to know that I am very young in ASP.NET world so please bear with me.I have been looking for an answer to my problem, but unfortunately I couldn’t find one. So I created a user here on www.asp.net just for making this post.
Before I continue I just want to apologies if there is another post where this question is already answered.
Please watch this Print Screen I just took: � http://www.bewarmaronsi.com/Capture.JPG “
As you can see the “INSERT, UPDATE, and DELETE Statements� are disabled, and that’s exactly my problem. I tried with an MS access database and it works perfect, but when I use a MS SQL database this field gets disabled for some reason.
The MDF file is located in the App_data folder and is called ASPNETDB.
And when I try to add custom SQL statements, it gives me Syntax error near “=�. Something like that. I bought the Total Training Set1 package and it works perfect in their examples.
I just want to thank you for reading my post and I hope that you got some useful information for me.
By the way, I’, from Sweden so you have to excuse me if my English is rusty.
Thanks!
PS: Can it be that I’m running windows Vista?
INSERT, UPDATE And DELETE Statements Checkbox Inactive
Mar 26, 2008I have problem in using the SQLDataSource. When in VS 2005 I drag and drop the SQLDataSource onto my page and then add a GridView control.I bind the GridView control to the SQLDataSource control. But the problem is it does not generate the INSERT, UPDATE, and DELETE statements. The dialog box is inactive. The screenshots may help. please help me in this regard. I also tried it for Accesscontrol but the same problem. Sorry for my poor English!. thanks in advance
the screenshot links:
http://img139.imagevenue.com/img.php?image=28285_2_122_937lo.JPGhttp://img205.imagevenue.com/img.php?image=27550_1_122_203lo.JPG
Is It Possible To Audit Failed Insert, Update And Delete Statements?
Oct 25, 2004Auditors want us to track when Insert, Update and Delete failures occur. Is this possible in SQL 2000?
They also want us to track schema changes. Is this possible?
Thanks, Dave
Transact SQL :: Not Allowed To Write Delete Statements In A Function?
Jun 25, 2015We are not allowed to write delete statement in a function. It will give the below error.
"Invalid use of a side-effecting operator 'DELETE' within a function."
We will get the same error for truncate/drop statements.
What is the reason behind this error?
Do Not Replicate DELETE Statements Still Replicates Deletes To Subscribers
Dec 4, 2006I previously asked What does "Do not replicate DELETE statements" do? to make sure I was correct on my thinking of what "Do not replicate DELETE statements" does. And after finding out it does what I would like it to do, create an archive db, I've tried several testing scenarios to see if it would work. So far I have been unable to not replicate delete statements. I'm not sure if I'm not setting a property right or what and any guidance would be appreciated.
Here is what I've done.
Created a blank db to be used as a subscriber and created a test db with some random data in a table.
Setup a New Publication on the db with the random data as "Transactional Publication"
Selected the following articles and properties in the publication
Tables
DELETE Delivery Format = Do not replicate DELETE statements
Views
Default Values
Stored Procedures
Default Values
User Functions
Default Values
Selected the default options for the rest of the New Publication Wizard steps and clicked finish.
Created a Pull Subscription on the new publication that I just created.
Let it initialize.
Then did a select count(*) query on the test table on the publication (18k+ rows) and subscriber (18k+ rows)
Then did a delete t-sql from the test table on the publication.
Then did a select count(*) query on the test table on the publication (0 rows) and subscriber (0 rows).
Now shouldn't it not delete the records on the subscription db?
Transact SQL :: Reducing Deadlocks From Conflicting Delete Statements
Jun 15, 2015I am working on an app that getting quite a few deadlocks due to delete statements. Â I have turned on the sql trace flags and pulled the offending delete statements out of the ERRORLOG and trying to mesh those up with the indexes defined on the table, etc. looking to see if there is anything that can be done strictly from the db side (no app code change) to reduce/eliminate these deadlocks. Â I have ran some tests/played around with RCSI and even disabling lock escalation but neither have improved my results.
What I have done is to search the errorlog file for DELETE FROM Tablename, output those matching lines, then sort of normalize the literal values to # or XYZ, open in Notepad++, removed trailing whitespace + dups and sort to come up with these results for the unique list of offending T-SQL statements (a LOT easier to read in text editor so sending screen cap. Â
Open this url in new tab [URL] ....
SqlDataSource: Can't Gen INSERT/UPDATE/DELETE Statements; Using 2.0 Membership Aspnetdb
Jul 20, 2006Hi,I'm new to ASP.NET and having a problem configuring the SqlDataSource control. I am using the standard ASP.NET 2.0 "aspnetdb" database to manage user accounts. The problem is this:When using the wizard to configure my SqlDataSource control, the option to auto-generate the Insert/Update/Delete SQL statements are grayed out. I've searched this forum and found that this can be a symptom of no primary keys in the tables. However, there are primary keys (UserId), which is the default schema as generated by asp.net (aspnet_regsql.exe). When I use the wizard, I make the following choices:How would you like to retrieve data from your database?-> Select "Specify columns from a table or view"-> Select the "vw_aspnet_MembershipUsers" view from the "Name:" drop-down list-> Select "UserId", "Email", "UserName" from "Columns:"After this, still no option to auto-generate I/U/D statements. Any thoughts on why this isn't working??? Thanks,Leah.
View 1 Replies View RelatedData Access :: Delete Statement Blocking Insert Statements
Jul 17, 2015We are using MS SQL Server 2008. I am running a batch job which deletes 21 days older records(6-7 million records). But daily we have transaction is going on in the database. When the delete occurs, all the insert statements got blocked and waits till the delete statement to complete. May I know why the blocking occurs?Â
View 3 Replies View RelatedSQL Data Source Control...Generate Insert, Update && Delete Statements...
Apr 23, 2008I have an SQL data source on my page and I select "Table". On the next screen I pick the fields I want to show. Then I click the "Advanced" button because I want to allow Inserts, updates and deletes. But its all greyed out abd I can't check this option. The UID in the connection string I am connecting under has the correct permissions in SQL server to do inserts, update and deletes too. Anyone know why it would be greyed out? The connectionstring property in the aspx code is dynamic but this shouldn't be the reason because I have used this before with success
View 2 Replies View RelatedSQL Server 2008 :: Maintenance Plan Delete History Trying To Delete Wrong Files
Sep 11, 2015I have some simple files but they are failing because the delete history task is failing as it is looking for files in a non existent directory.
It is looking for files in C:Program FilesMicrosoft SQL ServerMSSQL10_50.INSTANCEMSSQLLog whereas it should be looking in C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLLog
how I can get this corrected so I can get the Maintenance Plans to run correctly.
I have tried deleting and recreating the Plan but to no avail
Master Data Services :: Hard Delete All Soft Delete Records (members) In Database
May 19, 2012I am using Master Data Service for couple of months now. I can load, update, merge and soft delete data in MDS. Occasionally we even have to hard delete data from MDS. If we keep on soft deleting records in a MDS table eventually there will be huge number of soft deleted records. Is there an easy way to hard delete all the soft deleted records from all MDS tables in a specific Model.
View 18 Replies View RelatedCopy And Delete Table With Foreign Key References(...,...) On Delete Cascade?
Oct 23, 2004Hello:
Need some serious help with this one...
Background:
Am working on completing an ORM that can not only handles CRUD actions -- but that can also updates the structure of a table transparently when the class defs change. Reason for this is that I can't get the SQL scripts that would work for updating a software on SqlServer to be portable to other DBMS systems. Doing it by code, rather than SQL batch has a chance of making cross-platform, updateable, software...
Anyway, because it needs to be cross-DBMS capable, the constraints are that the system used must work for the lowest common denominator....ie, a 'recipe' of steps that will work on all DBMS's.
The Problem:
There might be simpler ways to do this with SqlServer (all ears :-) - just in case I can't make it cross platform right now) but, with simplistic DBMS's (SqlLite, etc) there is no way to ALTER table once formed: one has to COPY the Table to a new TMP name, adding a Column in the process, then delete the original, then rename the TMP to the original name.
This appears possible in SqlServer too --...as long as there are no CASCADE operations.
Truncate table doesn't seem to be the solution, nor drop, as they all seem to trigger a Cascade delete in the Foreign Table.
So -- please correct me if I am wrong here -- it appears that the operations would be
along the lines of:
a) Remove the Foreign Key references
b) Copy the table structure, and make a new temp table, adding the column
c) Copy the data over
d) Add the FK relations, that used to be in the first table, to the new table
e) Delete the original
f) Done?
The questions are:
a) How does one alter a table to REMOVE the Foreign Key References part, if it has no 'name'.
b) Anyone know of a good clean way to get, and save these constraints to reapply them to the new table. Hopefully with some cross platform ADO.NET solution? GetSchema etc appears to me to be very dbms dependant?
c) ANY and all tips on things I might run into later that I have not mentioned, are also greatly appreciated.
Thanks!
Sky
SQL - Cascading Delete, Or Delete Trigger, Maintaining Referential Integrity - PLEASE HELP ME!!!
Nov 13, 2006I am having great difficulty with cascading deletes, delete triggers and referential integrity.
The database is in First Normal Form.
I have some tables that are child tables with two foreign keyes to two different parent tables, for example:
Table A
/
Table B Table C
/
Table D
So if I try to turn on cascading deletes for A/B, A/C, B/D and C/D relationships, I get an error that I cannot have cascading delete because it would create multiple cascade paths. I do understand why this is happening. If I delete a row in Table A, I want it to delete child rows in Table B and table C, and then child rows in table D as well. But if I delete a row in Table C, I want it to delete child rows in Table D, and if I delete a row in Table B, I want it to also delete child rows in Table D.
SQL sees this as cyclical, because if I delete a row in table A, both table B and table C would try to delete their child rows in table D.
Ok, so I thought, no biggie, I'll just use delete triggers. So I created delete triggers that will delete child rows in table B and table C when deleting a row in table A. Then I created triggers in both Table B and Table C that would delete child rows in Table D.
When I try to delete a row in table A, B or C, I get the error "Delete Statement Conflicted with COLUMN REFERENCE". This does not make sense to me, can anyone explain? I have a trigger in place that should be deleting the child rows before it attempts to delete the parent row...isn't that the whole point of delete triggers?????
This is an example of my delete trigger:
CREATE TRIGGER [DeleteA] ON A
FOR DELETE
AS
Delete from B where MeetingID = ID;
Delete from C where MeetingID = ID;
And then Table B and C both have delete triggers to delete child rows in table D. But it never gets to that point, none of the triggers execute because the above error happens first.
So if I then go into the relationships, and deselect the option for "Enforce relationship for INSERTs and UPDATEs" these triggers all work just fine. Only problem is that now I have no referential integrity and I can simply create unrestrained child rows that do not reference actual foreign keys in the parent table.
So the question is, how do I maintain referential integrity and also have the database delete child rows, keeping in mind that the cascading deletes will not work because of the multiple cascade paths (which are certainly required).
Hope this makes sense...
Thanks,
Josh
Delete Syntax To Delete A Record From One Table If A Matching Value Isn't Found In Another
Nov 17, 2006I'm trying to clean up a database design and I'm in a situation to where two tables need a FK but since it didn't exist before there are orphaned records.
Tables are:
Brokers and it's PK is BID
The 2nd table is Broker_Rates which also has a BID table.
I'm trying to figure out a t-sql statement that will parse through all the recrods in the Broker_Rates table and delete the record if there isn't a match for the BID record in the brokers table.
I know this isn't correct syntax but should hopefully clear up what I'm asking
DELETE FROM Broker_Rates
WHERE (Broker_Rates.BID <> Broker.BID)
Thanks
I Use SQL 2000, Can You Use One Delete Query To Delete 2 Tables?
Nov 26, 2007this is my Delete Query NO 1
alter table ZT_Master disable trigger All
Delete ZT_Master WHERE TDateTime> = DATEADD(month,DATEDIFF(month,0,getdate())-(select Keepmonths from ZT_KeepMonths where id =1),0) AND TDateTime< DATEADD(month,DATEDIFF(month,0,getdate()),0)
alter table ZT_Master enable trigger All
I have troble in Delete Query No 2
here is a select statemnt , I need to delete them
select d.* from ZT_Master m, ZT_Detail d where (m.Prikey=d.MasterKey) And m.TDateTime> = DATEADD(month,DATEDIFF(month,0,getdate())-(select Keepmonths from ZT_KeepMonths where id =1),0) AND m.TDateTime< DATEADD(month,DATEDIFF(month,0,getdate()),0)
I tried modified it as below
delete d.* from ZT_Master m, ZT_Detail d where (m.Prikey=d.MasterKey) And m.TDateTime> = DATEADD(month,DATEDIFF(month,0,getdate())-(select Keepmonths from ZT_KeepMonths where id =1),0) AND m.TDateTime< DATEADD(month,DATEDIFF(month,0,getdate()),0)
but this doesn't works..
can you please help?
and can I combine these 2 SQL Query into one Sql Query? thank you
How To Run Delete Query / Delete Several Rows Just By One Click ?
Feb 16, 2008I'm using SqlDataSource and an Access database. Let's say I got two tables:user: userID, usernamemessage: userID, messagetextLet's say a user can register on my website, and leave several messages there. I have an admin page where I can select a user and delete all of his messages just by clicking one button.What would be the best (and easiest) way to make this?Here's my suggestion:I have made a "delete query" (with userID as parameter) in MS Access. It deletes all messages of a user when I type in the userID and click ok.Would it be possible to do this on my ASP.net page? If yes, what would the script look like?(yes, it is a newbie question)
View 2 Replies View RelatedAllow Single Row Delete From A Table But Not Bulk Delete
Sep 16, 2013The requirement is: I should allow single row delete from a table but not bulk delete. An audit table should get updated if there is any single delete or single update. So I wrote the triggers as follows: for single and bulk delete
ALTER TRIGGER [dbo].[TRG_Delete_Bulk_tbl_attendance]
ON [dbo].[tbl_attendance]
AFTER DELETE
AS
[code]...
When I try to run the website, the database error I am getting is:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 0, current count = 1.
Delete Doesn't Delete Rows, But @@ROWCOUNT Says It Did
Aug 20, 2007I ran the following query in Query Analyzer on a machine running SQL Server 2000. I'm attempting to delete from a linked server running SQL Server 2005:
DELETE FROM sql2005.production.dbo.products
WHERE vendor='Foo'
AND productId NOT IN
(
SELECT productId FROM sql2000.staging.dbo.fooProductList
)
The status message (and @@ROWCOUNT) told me 8 rows were affected, but nothing was actually deleted; when I ran a SELECT with the same criteria as the DELETE, all 8 rows are still there. So, once more I tried the DELETE command. This time it told me 7 rows were affected; when I ran the SELECT again, 5 of the rows were still there. Finally, after running this exact same DELETE query 5 times, I was able to remove all 8 rows. Each time it would tell me that a different number of rows had been deleted, and in no case was that number accurate.
I've never seen anything like this before. Neither of the tables involved were undergoing any other changes. There's no replication going on, or anything else that should introduce any delays. And I run queries like this all day, involving every thinkable combination of 2000 and 2005 servers, that don't give me any trouble.
Does anyone have suggestions on what might cause this sort of behavior?
Cannot Amend Or Delete Subscription And Cannot Delete Report.
Nov 20, 2007
Hi,
I have a problem with one report on my server. A user has requested that I exclude him from receiving a timed email subscription to several reports. I was able to amend all the subscriptions except one. When I try to remove his email address from the subscription I receive this error:
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Online no help couldn't offer any advice at all, so I thought I'd just delete the subscription and recreate it again, but I receive the same message. "Okay, no problem, I'll just delete the report and redeploy it and set up the subscription so all the other users aren't affected", says I. "Oh, no!", says the report server, and then it give me this message:
System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.DBInterface.DeleteObject(String objectName) at Microsoft.ReportingServices.Library.RSService._DeleteItem(String item) at Microsoft.ReportingServices.Library.RSService.ExecuteBatch(Guid batchId) at Microsoft.ReportingServices.WebServer.ReportingService2005.ExecuteBatch() --- End of inner exception stack trace ---
What's even weirder is that I'm the owner and creator of the report and I'm a system admin and content manager on the report server and I set up the subscription when the report was initially deployed. Surely I should have sufficient rights to fart around with this subscription/report as I see fit?
I have rebooted the server, redeployed the report, checked credentials on the data source and tried amending and deleting from both the report manager and management studio but still I am prevented from doing so.
Any help would be much appreciated.
Thanks in advance,
Paul
Delete From Vs Delete With Subquery In Transaction
Feb 23, 2006First, this is not my code.
This one is weird and I am missing something fundamental on this one. A developer was getting a timeout with this...
CREATE PROCEDURE p_CM_DeleteBatch
(
@SubmitterTranID VARCHAR(50)
)
AS
DECLARE
@COUNT INT,
@COMMIT INT
SET @COUNT = 0
SET @COMMIT = 1 --DO NOT CHANGE THIS. The Operation will be commited only when this value is 1
select @COUNT = COUNT(*) from claimsreceived
where (claimstatus NOT IN ('Keyed', 'Imported')) AND
SubmitterTranID = @SubmitterTranID
IF (@COUNT = 0) --This means that that Claims under this Batch have not been adjudicated & it is safe to delete
BEGIN
BEGIN TRANSACTION
DELETE FROM INVOICECLAIMMAPPING WHERE CLMRECDID IN (SELECT DISTINCT CLMRECDID FROM CLAIMSRECEIVED WHERE SUBMITTERTRANID = @SUBMITTERTRANID)
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPayment WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPaymentServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsreceivedPayorServices where ClmRecdPyID in (SELECT ClmRecdPyID
FROM ClaimsReceivedPayors
WHERE SubmitterTranID = @SubmitterTranID)
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceivedPayors WHERE ClmRecdid in (SELECT ClmRecdID
FROM ClaimsReceived
WHERE SubmitterTranID = @SubmitterTranID)
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceivedServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceived WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM BATCHLOGCLAIMS WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
IF (@COMMIT = 1)
BEGIN
--ROLLBACK TRANSACTION --For Testing Purpose ONLY
COMMIT TRANSACTION
RETURN (0)
END
ELSE
BEGIN
ROLLBACK TRANSACTION
RETURN (-1)
END
END
ELSE
BEGIN
RaisError ('This Batch cannot be deleted. It has claim(s) which has been Adjudicated', 16, 1)
END
GO
I applied a couple of indices and got ride of the uncorrelated subqueries
CREATE PROCEDURE p_CM_DeleteBatch
(
@SubmitterTranID VARCHAR(50)
)
AS
DECLARE
@COUNT INT,
@COMMIT INT
SET @COUNT = 0
SET @COMMIT = 1 --DO NOT CHANGE THIS. The Operation will be commited only when this value is 1
select @COUNT = COUNT(*) from claimsreceived
where (claimstatus NOT IN ('Keyed', 'Imported')) AND
SubmitterTranID = @SubmitterTranID
IF (@COUNT = 0) --This means that that Claims under this Batch have not been adjudicated & it is safe to delete
BEGIN
BEGIN TRANSACTION
DELETE INVOICECLAIMMAPPING
FROM INVOICECLAIMMAPPING
JOIN CLAIMSRECEIVED
ON INVOICECLAIMMAPPING.CLMRECDID = CLAIMSRECEIVED.CLMRECDID
WHERE CLAIMSRECEIVED.SUBMITTERTRANID = @SUBMITTERTRANID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPayment
WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsPaymentServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE ClaimsreceivedPayorServices
FROM ClaimsreceivedPayorServices
JOIN ClaimsReceivedPayors
ON ClaimsreceivedPayorServices.ClmRecdPyID = ClaimsReceivedPayors.ClmRecPyID
WHERE ClaimsReceivedPayors.SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE ClaimsReceivedPayors
FROM ClaimsReceivedPayors
JOIN ClaimsReceived
ON ClaimsReceivedPayors.ClmRecdid = ClaimsReceived.ClmRecdid
WHERE ClaimsReceived.SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceivedServices WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM ClaimsReceived WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
DELETE FROM BATCHLOGCLAIMS WHERE SubmitterTranID = @SubmitterTranID
IF (@@ERROR <> 0)
SET @COMMIT = 0
IF (@COMMIT = 1)
BEGIN
--ROLLBACK TRANSACTION --For Testing Purpose ONLY
COMMIT TRANSACTION
RETURN (0)
END
ELSE
BEGIN
ROLLBACK TRANSACTION
RETURN (-1)
END
END
ELSE
BEGIN
RaisError ('This Batch cannot be deleted. It has claim(s) which has been Adjudicated', 16, 1)
END
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
Suddenly this constraint was being violated with the change
ALTER TABLE [dbo].[ClaimsReceivedPayorServices] ADD CONSTRAINT [FK_ClaimsReceivedPayorServices_CLAIMSRECEIVEDPAYOR S] FOREIGN KEY
(
[ClmRecdPyID]
) REFERENCES [CLAIMSRECEIVEDPAYORS] (
[CLMRECPYID]
)
Is the delete on ClaimsReceivedPayors starting before the delete on ClaimsreceivedPayorServices finishes? If so why would it matter between the join and subquery? This one is making me depressed because I can not explain it.
To Delete Or Not To Delete - DESIGN ISSUE!
Apr 3, 2008Hi all
Need some advice solving a little problem I have with my database!
Current setup:
I have a person table that is made up of 39 columns. I also allow for person records to be deleted but I do this by having another table I call LogicallyDeletedrecords. This table is made up of the PersonId, Reason for deletion/suppression and a date time stamp. To access Live records I created a view based on my Person table which contains a WHERE clause to exclude records that exist in the LogicallyDeletedrecords. Similarly, I have another view DeadPersonData which contains Person records that have been removed. Hope it all makes sense so far! Now on to my worries!
The problem:
My Person table contains 9+ million records. The LogicallyDeletedrecords table has 500k+ but I anticipate further growth over the coming weeks/months. My worry is that my LivePersonData view will be too slow to access as my LogicallyDeletedrecords table grows. What’s more, as part of my Load routine, I have to make sure that Person data loaded on to the system is excluded if that same person exists as a deleted member. Both of these actions could slow down my system as the deleted table grows.
My thoughts:
I’ve been thinking of physically deleting dead Person records from my person table (possibly creating an archive table to hold them). But then if I delete them how do I cross check the details when new Person details get loaded?! As I said, my current LogicallyDeletedrecords table holds the PersonId, ReasonDeleted and CreationStamp. The only way is to add further columns which I use to match Person Details?
Any design suggestions would be welcome!
One DELETE Sql Statement To Delete From Two Tables
Aug 12, 2007I am trying to write one sql statement that deletes from two tables. Is it possible ? If yes, any thoughts ?
View 5 Replies View RelatedSoft Delete In Table, Why Merge Agent Report Hards Delete On Table ?
Feb 1, 2007Hi seniors
there are two tables involve in replication let say table1 and replicated table is also rep.table1.
we are not deleting records physically in table1 so only a bit in table1 has true when u want to delete a record but the strange thing is that replication agaent report that this is hard delete operation on table1 so download and report hard delete operation and delete the record in replicated table which is very crucial.
plz let me know where am i wrong and how i put it into right way.
there is no triggers on published tables and noother trigger is created on published table.
regards
Ahmad Drshen
SQL Statements
Aug 17, 2006Hi guys,
Need some help in some query processing...
Here goes,this is the results i have obtained so far
|id |cat | name |
1 .....a... apple
1 .....b .. banana
2 .....a ...austria
2 .....b ...brazil
2 .....c ...china
3 .....a ...abraham
3 .....c ...clinton
Column cat can have at most 3 different types of values..{a,b,c}
I wanna write a query such that the result comes out as such
<(....id ......a .......b......... c..) corresponding to these fields.>
|Col 1| Col 2 | Col 3 | Col 4|
....1 ...apple ...banana
....2 ...austria .brazil... china
....3 ...abraham ..........clinton
Anyone can help...thanks guys
If Statements In SP
Sep 21, 2006I use SQL Server 2005.I want to create a SP "Search". With this function a user can serach the member database on several criteria: age minimal, age maximal, name, city..BUT these criteria do not necessarily have to be defined by the user, so it might be that a user searches for all members whose age is between ageMin and ageMax leaving the name and city criteria empty.So in my SP I have to check whether these values are empty or not. If a parameter is not empty I have to add it to my selection query.. BUT, I know that SQL Server makes an execution plan, and understood that when you use if-statements the procedure needs to be recompiled every time?Is this true? If so:how does this work then?Is there another way for me to still be able to create this SP?
View 2 Replies View RelatedHelp With If-Else Statements In SQL...please...
Dec 11, 2006Hello guys. How is this declared in SQL?
Select * FROM my_table
if my_column = "1" UPDATE my_table SET my_other_column= "a" ////my_column and my_other_column belong to my_table
else if my_column="2" UPDATE my_table SET my_other_column= "b" ////my_column and my_other_column belong to my_table
Sql Statements Per Second
Jan 27, 2008Hi, I would like to know the number of SQL statements per second being generated by my web site. How can I know this? Best Regards,MeeNge
View 6 Replies View Related