When I try to shrink the log file for my databases I am getting following message.
Cannot shrink log file 2 (cm_archive_mp_Log) because all logical log files are in use.
what should I do to successfully shrink the log file.
Thanks.
I have a 13 Gig Log File with only 121 Mgs of space used. I have run the DBCCSHRINKFILE command and it has shrunk it by about 100 Mgs. Why can't I get it to shrink to a reasonable size.
View 2 Replies View RelatedHave a 6G data file in a single filegroup.
Using dbcc shrinkfile to shrink.
Does not have any effect.
Any ideas?
Hi, is there any other way to shrink the log file other than truncating every time it gets bigger... I have a 800MGs database and the log is getting as big as 11Gigs... any suggestions other than truncating it? Is there a way to set it off?
View 1 Replies View RelatedI'm trying to shrink the log file. I have used the suggestions that I have seen posted previously. This is the script I've been using.
DECLARE @DB VARCHAR(40)
SELECT @DB = 'PBDSSTEST'
CHECKPOINT
EXEC('DBCC SHRINKFILE ('+@DB+'_log, 1, NOTRUNCATE)')
EXEC('DBCC SHRINKFILE ('+@DB+'_log, 1, TRUNCATEONLY)')
CREATE TABLE t2 (char1 char(4000))
DECLARE @i int SELECT @i = 0 WHILE (@i < 300) begin INSERT t2 values ('a') SELECT @i = @i +1 END DROP TABLE t2
BACKUP LOG PBDSSTEST TO PBDSSTESTLOGBACKUP
Before I ran this the used portion of the log was 1795.12 MB, the free was 1570.50 MB for a total of 3365.62 MB.
After completing this the used portion was 25.62 MB, the free space was 3263.50 for a total of 3289.12 MB. It only srhunk about 26 MB. Why won't it shrink it anymore. There was plenty of data in the used at the time of the shrinkfile command so I would have thought it would have shrunk it a lot more.
Please help. I don't understand why it won't shrink it anymore than it did.
how can we shrink the log file to the required size without affecting the live database .....
Thanks in advance
I have a problem with shrinking a log file on SQL 2000. The log file has grown to 25gb (the db is 30gb) . The DB was in simple recover mode but I have changed it to full so that the log file can be backed up. I have run the dbcc shrinkfile on the log file several times (plus log file backups) and it has increased the logfile size. Each time I have run shrinkfile I get €˜Cannot shrink log file 2 (db_Log) because all logical log files are in use€™ message. I have used the dbcc loginfo command and this shows that all the virtual log files are in use. The db also publishes 4 snapshot replications. Any suggestion for how I can easily shrink the log file?
thanks
Simon
I have a database that was loaded with large amounts of data before today. I backup up the db and trans log. presently the DB file is 328 while the trans log show 428 meg with only 28 meg being used. If I try to shrink either the database or the log files, the log file wil not shrink.. It tells me to set it to a minimum of 28 meg but still not shirnk. I realize this was a problem in 7, any quick fixes, in a hurry. Running SQL 2000 SP1
View 1 Replies View RelatedI'd like to create a stored procedure to automatically shrink the transaction log file on a certain database monthly. As I am not the DB admin (it's a web-based db on a remote server), I'd like to put together a script to create the procedure so I can just send it to the DB admin to run. It seems like it should be pretty easy, but I'm still pretty new to SQL server. Is anyone able to give me some pointers?
View 1 Replies View Related
I have a relatively high usage 2005 database whose transaction log grows every day.
Untill now I have been manually shrinking the log files .. but I would like to automate this process.
In the maintenance schedule that runs every night
1 Do a full backup to disk
2. Do a transaction log backup to disk
3. run the following TSQL
USE [MyDB];
GO
ALTER DATABASE MyDB
SET RECOVERY SIMPLE;
GO
DBCC SHRINKFILE (MyDB_log, 3000)
GO
ALTER DATABASE MyDB
SET RECOVERY FULL;
GO
4. Backup disk files to tape.
however it doesn't work !! the TLOG file does not shrink, even though its the same as the manual job that I run?
There is nothing in the SQL logs .. but in the event log I get
Event Type: Error
Event Source: SQLISPackage
Event Category: None
Event ID: 12291
Date: 13/12/2007
Time: 00:50:10
User: NT AUTHORITYSYSTEM
Computer: ALGSQL1
Description:
Package "MyDB_FULL_BACKUP" failed.
For more information, see Help and Support Center
any ideas ?
Hi,
What is the difference between shrinking a DB with that of a file.
When you select a DB to shrink will it not shrink all the files in it.
Because when I select Files to shrink it does not prompt me with
a specific file.
So I am confused as to why SQL server 2K5 asks if you need to shrink DB or FILE
Tnx
Hello,
I'm having couple of DB that are mirrored.
my concerne is regarding the Log file size.
I'm running the following steps:
BACKUP DATABASE [DBName] TO DISK = N'Backup_File' WITH NOFORMAT, INIT, SKIP, NOREWIND, NOUNLOAD, STATS = 10
then
BACKUP LOG [DBName] TO DISK = N'Backup_File' WITH NOFORMAT, NOINIT, SKIP, NOREWIND, NOUNLOAD, STATS = 10
if I try to run a SHRINKFILE (DBName_log, 20)
I receive the following info:
Cannot shrink log file 2 (DBName_log) because all logical log files are in use
I'n a bit tense using a
BACKUP LOG [DBName] WITH TRUNCATE_ONLY
as it's part of a mirroring.
but I need to reduce the size of the log file.
thank four your suggestions
Eric
please advice me what does .ldf file consist of and can i shrink the .ldf , is it adviceble to shrink after the backup and how frequently it can be done on a production db
please advice me ,can i shrink the .mdf , it is adviceble to shrink after the backup and how frequently it can be done on a production db
Thanks
(SQL 2005) I have a few databases that are currently hovering at around 150GB. (The following only concerns the .mdf) Of this total size, only about 90GB is real data. The other 60-70 is data from unecessary audit tables. Recently, we've been having some space issues on a 1.7TB server. We've decided that deleting these audit tables and reclaiming the 60-70GB per database is the route we're going to take.
What we did: DELETE <table> (per audit table). Now, it shows that the database size is ~90GB and there is the 60-70GB of unallocated space.
Then, we ran a DBCC SHRINKDATABASE (db_name) overnight. Checked space the next morning and only about 10GB had been reclaimed. We've tried a number of other alternatives of which, none have been successful.
(DBCC SHRINKFILE(file, space), drop and recreate tables, etc.)
Can anyone think of any reason why these commands would not be working? If I can provide any additional information, please let me know.
Thank you in advance for any input!
Hi,
I have an interesting problem here. I am running SQL Server 2005 and have a large database. After running some scalability tests over the weekend my MDF file size went up to 25GB and LDF file size went up to 27GB filling up all available disk space. I didn't do any backups, so it is understandable why the LDF file size is so large.
Now I am trying to shrink the LDF file. However, DBCC LOGINFO indicated that all LVFs within the LDF are active (Status = 2). I detached the database to make sure no active connections exist and ran CHECKPOINT, but still DBCC LOGINFO lists all LVFs with status 2. Since all LVFs are up to date I can't shrink my LDF file.
Why are all LVFs still active after detach/attach and checkpoint?
How can I shrink the LDF file?
Thanks.
Alec
Is there a fairly quick and dirty way to shrink the file size allowedfor a DB on SQL server after the DB is in use?Our old DBA allowed 3 gb for log files and we don't need nearly thatmuch. However, the space is still being used and reserved. Can Ishrink that "maximum" and clear up the space?I don't want to just copy all the tables and primary keys and open anew one with the new data, though that is plan A right now.I cant just change sysfiles, it yells at me.
View 1 Replies View RelatedI've been searching and reading for best practices on how to maintain a reasonable log file size while engaging in Log Shipping. I have found plenty of information on these subjects on their own, but not on how best to shrink your log size without breaking your log shipping integrity.
I apprecaite your help.
On a SQL Server 7.0 database I support, I've been unsuccessful trying to shrink a data file using dbcc shrinkfile (datafile_logical_name, 0). This worked fine for shrinking the log, but of the 4 datafiles that were created 2 shrank successfully and 2 remain unchanged. Unless the information on the General Tab on Enterprise Manager is incorrect, of the 15000MB allocated for one of the files, only 700 MB are used.
View 1 Replies View RelatedGurus,
I have inherited a SQL 2000 database ( (I am new to SQL DBA) and I found this when I was checking the db properites . The transaction log has grown bigger than the actual data file, I thought transaction log backups would truncate the inactive portion of the log file and shrink the transaction log, but it was not the case it seems, may be it was truncating the inactive portion of the log, but not shrinking it. This site does not have a job for truncating the data/log files periodically. What is the best method to deal this situation, how can I shrink the Transaction log quickly?,
All your suggestions are welcome.
TIA,
-Jay
My intention is to include a sql job to schedule for shrinking log files to half of its original log file size (if half of their original size is greater than 5MB)
The code is below. But while executing the code it is keeps on running indefinitely. can somebody throw some light what cause it to go into an indefinite loop.
Thanks
Babu
code:
====
DECLARE db_file_name CURSOR FOR
SELECT name , ceiling(size/128.0) * 0.5
FROM master..sysaltfiles
Where rtrim(lower(filename)) like '%.ldf'
DECLARE @f_name varchar(128), @new_f_size int
OPEN db_file_name
FETCH NEXT FROM db_file_name INTO @f_name,@new_f_size
WHILE @@FETCH_STATUS = 0
BEGIN
If ( @new_f_size > 5)
BEGIN
DBCC SHRINKFILE ( @f_name, @new_f_size )
FETCH NEXT FROM db_file_name INTO @f_name,@new_f_size
END
END
CLOSE db_file_name
deallocate db_file_name
We are using Sql server 2012. One of our production database has hight no of vlfs. We are planning to shrink the logfile to reduce the no of VLFs but the database is configured for logshipping.
What is the effect of logshipping when you shrink the logfile?
Hi there,
I have a large (420GB) database that has never had data archived off before. I taken a backup to a test server and run a script supplied by the product vendor which has removed a large ammount of old data no longer required.
I have checked within enterprise manager that this data has now gone, however the actual file itself has not shrunk in size. Is there a further step I need to take to get back the space.
Kind Regards
Hi!
I have a database where I add some new Filegroups and moved some Gb's of
tables and indexes to new file groups.
Now I would like to shrink the source of these tables/indexes: the mdf file.
This means there should be much empty space now in the mdf file.
I tried to use dbcc shrinkfile, but it run for more than one day.
Are there some good strategies about shrinking the mdf file?
I had to restart the instanse because got problem using the db while dbcc runned...
Thank you for help
I have a SQL Server 2012 DB in Full recovery mode that has never had a TLOG backup. the log is huge 200+GB.
I tried doing a transaction log backup but there is not enough space on the Disk.
How can I reclaim this log space in SQL Server 2012?
Hi all:I restored one backup database (7.9 GB mdf) on two diffrent servers. Ishrunk them by clicking "Move pages to beginning of file beforeshrinking".After shrinking, one mdf file is 6.7 GB, and the other is 4.2GB. Ishunk again and again:1. the 6.7GB become 5.9GB, 5.2GB, 4.7GB and 4.2Gb (four times)2. the 4.2Gb become 4.0GB (just one more time)It is wired, I am wondering the mdf will be smaller and smaller if Icontinue to shrink them? What is the reason?ThanksWJ
View 1 Replies View Related1) Does shrinking a db have any side affects ? Or this is pretty much a normal
operation ?
2) Also in db options, is it recommended to have auto shrink checked ?
Thanks for your help.
I am new to SQL server.
We have many databases for which log files have grown much bigger. The one I need to Shrink immediately has 16 MB .mdf file and 12 GB of .ldf file.
I will very much appreciate, if somebody can help me with step by step process to shrink the database/log file (some way). We are in a crunch situation
Thanks
Hi all,I've deleted a lot of albums but the size of personal.mdf isn't shrinking - how do i go about acheiving this? I've tried to shrink it in sql management express but the file is read only..
please help!
thanks
I have a webhost where it seems my control of my database is fairly restricted. I cannot backup the database because I don't have the necessary permissions. I cannot perform a DBCC SHRINKFILE (permissions) - and many other DBCC commands. I ran into a problem where my log file filled up during the middle of the day and impacted my operations - data was lost.
I found some TSQL for shrinking the log file, but the statement:
SET @TruncLog = 'BACKUP LOG [' + db_name() + '] WITH TRUNCATE_ONLY'; EXEC (@TruncLog)
will not execute because I cannot execute the BACKUP LOG command (permissions)...
Is there anything else I can do, or am I to far up the creek (w/o my paddle)??
Thanx
Jerry
HiRunning SQL 7 sp3 on NT 4
I have a database that has the auto shrink option turned OFF. However, the log file seems to auto shrink after the user
runs bulk insert.
The log file is not setup to auto grow either.Any ideas.
Thanks,
Tariq
I've been trying to shrink my SQL 7 Transaction log after it had grown to 30+GB's. After running the command dbcc shrinkfile 'filename' and the new size, I'm getting a result set of:
DbId FileId CurrentSize MinimumSize UsedPages EstimatedPages
------ ------ ----------- ----------- ----------- --------------
6 2 640 128 640 128
(1 row(s) affected)
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
However my transaction log remains the same size. Any advise would be appreciated!
I'm having a problem shrinking my transaction log. I have a 1GB database with a 500MB transaction log. The transaction logs are backed up every 10 minutes but it has grown to 2.2GB. I've tried backing the transaction log with TRUNCATE_ONLY and then tried doing a DBCC SHRINKFILE but it doesn't seem to work. I've checked if there were any old, long running queries but there is none. What else can I do to reduce the transaction log size?
I've had a thought to create a secondary log file and then delete the primary but that isn't allowed. Is there anyway I can make the secondary log file the primary and vice-versa? This way I should be able to delete the secondary log file to reclaim space.
Any assistance is appreciated...
Many thanks,
Michelle
We have a database that was created with a 50 MB transaction log, that is set to autogrow. Due to activity the log periodically grows to over 200 MB. So we expanded it to 200 MB. But everytime the log is backed up, it shrinks to it's original size of 50 MB. The autoshrink option is not set, and no one is manually shrinking the log.
Any idea what could be causing this?
We are using SQL 7, SP 3.
Thanks!