Sick Query Help!
Dec 10, 2004
I am probably dreaming, but I am stumped on this!
The LY data comes back and balances perfectly and the CUR balances perfectly, but when I join them together I have a few columns that are off and I cant find theproblem, I have been staring at this for a day now!
Not sure of any good ways to give more detail to help diagnose problem without access to db....
here goes:
SELECT [Reverse] as Reversed, Descr, LINES.LineNu as LineNu, LineType,
Amt01 = Sum(isNull(Amt01,0)),
Amt02 = Sum(isNull(Amt02,0)),
Amt03 = Sum(isNull(Amt03,0)),
Amt04 = Sum(isNull(Amt04,0)),
Amt05 = Sum(isNull(Amt05,0)),
Amt06 = Sum(isNull(Amt06,0)),
Amt07 = Sum(isNull(Amt07,0)),
Amt08 = Sum(isNull(Amt08,0)),
Amt09 = Sum(isNull(Amt09,0)),
Amt10 = Sum(isNull(Amt10,0)),
Amt11 = Sum(isNull(Amt11,0)),
Amt12 = Sum(isNull(Amt12,0)),
Amt13 = Sum(isNull(Amt13,0)),
Bud01 = Sum(isNull(Bud01,0)),
Bud02 = Sum(isNull(Bud02,0)),
Bud03 = Sum(isNull(Bud03,0)),
Bud04 = Sum(isNull(Bud04,0)),
Bud05 = Sum(isNull(Bud05,0)),
Bud06 = Sum(isNull(Bud06,0)),
Bud07 = Sum(isNull(Bud07,0)),
Bud08 = Sum(isNull(Bud08,0)),
Bud09 = Sum(isNull(Bud09,0)),
Bud10 = Sum(isNull(Bud10,0)),
Bud11 = Sum(isNull(Bud11,0)),
Bud12 = Sum(isNull(Bud12,0)),
Bud13 = Sum(isNull(Bud13,0)),
LyAmt01 = Sum(isNull(LyAmt01,0)),
LyAmt02 = Sum(isNull(LyAmt02,0)),
LyAmt03 = Sum(isNull(LyAmt03,0)),
LyAmt04 = Sum(isNull(LyAmt04,0)),
LyAmt05 = Sum(isNull(LyAmt05,0)),
LyAmt06 = Sum(isNull(LyAmt06,0)),
LyAmt07 = Sum(isNull(LyAmt07,0)),
LyAmt08 = Sum(isNull(LyAmt08,0)),
LyAmt09 = Sum(isNull(LyAmt09,0)),
LyAmt10 = Sum(isNull(LyAmt10,0)),
LyAmt11 = Sum(isNull(LyAmt11,0)),
LyAmt12 = Sum(isNull(LyAmt12,0)),
LyAmt13 = Sum(isNull(LyAmt13,0)),
LyBud01 = Sum(isNull(LyBud01,0)),
LyBud02 = Sum(isNull(LyBud02,0)),
LyBud03 = Sum(isNull(LyBud03,0)),
LyBud04 = Sum(isNull(LyBud04,0)),
LyBud05 = Sum(isNull(LyBud05,0)),
LyBud06 = Sum(isNull(LyBud06,0)),
LyBud07 = Sum(isNull(LyBud07,0)),
LyBud08 = Sum(isNull(LyBud08,0)),
LyBud09 = Sum(isNull(LyBud09,0)),
LyBud10 = Sum(isNull(LyBud10,0)),
LyBud11 = Sum(isNull(LyBud11,0)),
LyBud12 = Sum(isNull(LyBud12,0)),
LyBud13 = Sum(isNull(LyBud13,0))
FROM (
SELECT [Reverse], Descr, LineNu, LineType
FROM shelbydb.shelby.glReportLines
where (reportcounter = 65)
) LINES
LEFT OUTER JOIN (
SELECT AcctNuHigh, AcctNuLow, LineNu, DeptNu, FundNu
from shelbydb.shelby.glReportLinks
where (reportcounter = 65)
) LINKS
on LINKS.linenu = LINES.linenu
LEFT OUTER JOIN (
SELECT * FROM (
SELECT s.conu as CoNu, s.deptnu as DeptNu,
s.fundnu as FundNu, s.acctnu as AcctNu,
Amt01 = Sum(isNull(Amt01,0)),
Amt02 = Sum(isNull(Amt02,0)),
Amt03 = Sum(isNull(Amt03,0)),
Amt04 = Sum(isNull(Amt04,0)),
Amt05 = Sum(isNull(Amt05,0)),
Amt06 = Sum(isNull(Amt06,0)),
Amt07 = Sum(isNull(Amt07,0)),
Amt08 = Sum(isNull(Amt08,0)),
Amt09 = Sum(isNull(Amt09,0)),
Amt10 = Sum(isNull(Amt10,0)),
Amt11 = Sum(isNull(Amt11,0)),
Amt12 = Sum(isNull(Amt12,0)),
Amt13 = Sum(isNull(Amt13,0)),
Bud01 = Sum(isNull(Bud01,0)),
Bud02 = Sum(isNull(Bud02,0)),
Bud03 = Sum(isNull(Bud03,0)),
Bud04 = Sum(isNull(Bud04,0)),
Bud05 = Sum(isNull(Bud05,0)),
Bud06 = Sum(isNull(Bud06,0)),
Bud07 = Sum(isNull(Bud07,0)),
Bud08 = Sum(isNull(Bud08,0)),
Bud09 = Sum(isNull(Bud09,0)),
Bud10 = Sum(isNull(Bud10,0)),
Bud11 = Sum(isNull(Bud11,0)),
Bud12 = Sum(isNull(Bud12,0)),
Bud13 = Sum(isNull(Bud13,0))
FROM shelbydb.shelby.GLSummary S
LEFT OUTER JOIN shelbydb.shelby.GLBudget B
on
(s.begindate = b.begindate)
and (s.acctnu = b.acctnu)
and (s.conu = b.conu)
and (s.deptnu = b.deptnu)
and (s.fundNu = b.fundNu)
WHERE
s.begindate = '1/1/2004'
group by
S.conu, S.deptnu, S.fundnu, S.acctnu,
b.conu, b.deptnu, b.fundnu, b.acctnu
) CUR
LEFT OUTER JOIN
(
SELECT
LyS.conu as LCoNu, LyS.deptnu as LDeptNu,
LyS.fundnu as LFundNu, LyS.acctnu as LAcctNu,
LyAmt01 = Sum(isNull(Amt01,0)),
LyAmt02 = Sum(isNull(Amt02,0)),
LyAmt03 = Sum(isNull(Amt03,0)),
LyAmt04 = Sum(isNull(Amt04,0)),
LyAmt05 = Sum(isNull(Amt05,0)),
LyAmt06 = Sum(isNull(Amt06,0)),
LyAmt07 = Sum(isNull(Amt07,0)),
LyAmt08 = Sum(isNull(Amt08,0)),
LyAmt09 = Sum(isNull(Amt09,0)),
LyAmt10 = Sum(isNull(Amt10,0)),
LyAmt11 = Sum(isNull(Amt11,0)),
LyAmt12 = Sum(isNull(Amt12,0)),
LyAmt13 = Sum(isNull(Amt13,0)),
LyBud01 = Sum(isNull(Bud01,0)),
LyBud02 = Sum(isNull(Bud02,0)),
LyBud03 = Sum(isNull(Bud03,0)),
LyBud04 = Sum(isNull(Bud04,0)),
LyBud05 = Sum(isNull(Bud05,0)),
LyBud06 = Sum(isNull(Bud06,0)),
LyBud07 = Sum(isNull(Bud07,0)),
LyBud08 = Sum(isNull(Bud08,0)),
LyBud09 = Sum(isNull(Bud09,0)),
LyBud10 = Sum(isNull(Bud10,0)),
LyBud11 = Sum(isNull(Bud11,0)),
LyBud12 = Sum(isNull(Bud12,0)),
LyBud13 = Sum(isNull(Bud13,0))
FROM shelbydb.shelby.GLSummary LyS
LEFT OUTER JOIN shelbydb.shelby.GLBudget LyB
on
(LyS.begindate = LyB.begindate)
and (LyS.acctnu = LyB.acctnu)
and (LyS.conu = LyB.conu)
and (LyS.deptnu = LyB.deptnu)
and (LyS.fundNu = LyB.fundNu)
where
LyS.begindate = '1/1/2003'
group by
LyS.conu, LyS.deptnu, LyS.fundnu, LyS.acctnu,
LyB.conu, LyB.deptnu, LyB.fundnu, LyB.acctnu
) LY
ON
(CUR.acctnu = LY.Lacctnu)
and (CUR.conu = LY.Lconu)
and (CUR.deptnu = LY.Ldeptnu)
and (CUR.fundNu = LY.LfundNu)
) GL
ON
LINKS.acctnuLow <= GL.acctnu
and
LINKS.acctnuhigh >= GL.acctnu
and
LINKS.deptnu =
( case when links.deptnu <> -1
then GL.deptnu
else LINKS.deptnu end )
and
LINKS.fundnu =
( case when links.fundnu <> -1
then GL.fundNu
else LINKS.fundnu end )
GROUP BY [Reverse], Descr, LINES.LineNu, LINES.LineType
ORDER BY LINES.linenu
View 3 Replies
ADVERTISEMENT
Jun 1, 2006
hello everyone...after several days trying to find the right command.. i have to ask youpeople...this is the deal:i have two tables related...the first one is the master, the second the slave...the first has fields like code, name, department and periodicity ofpayment...the second has the payment data... code, date of payment, amount topay...not every one in the first table has the payment in the same month...because a few people receives its pay one time in the month, and otherreceives payment every two or three months (periodicity of payment)...my trouble is when i want to see all the payments in one month of thepeople from one specific department, because if somebody doesn't gethis payment (different periodicity) i have to see the code and name ofthe worker AND the date and amount of payment in blank (in thatcase)...i thing that i must to be a simple LEFT JOIN but it doesn't work inAccess (i have a web asp page with and access database in this case)...i don't know what to do.. please.. if somebody has some ideas.. i needit...thanks..Enzo..ps/.. my left join code:SELECT table1.name, table2.date, table2.amountFROM table1 LEFT JOIN table2 ON table1.code = table2.codeWHERE (((table1.departm)=53) AND ((table2.date)=#2/15/2006#));
View 3 Replies
View Related
Nov 20, 2006
Hi,
I have a database with a giant logfile which I am having trouble shrinking - 25GB log file for a 10MB database. I cannot back up the database because I get some sort of disk failure in the application log file (there is plenty of room on the disk I think - 35GB). (Note: the software RAID system on this box is suspect.)
I cannot detach the database because it is being replicated.
I cannot remove the replication because the server the publication refers to no longer exists and I get an error about only being allowed to use real server names (a real Catch 22 there).
If I stop the server and rename the log file, the database becomes "suspect". Renaming it back fixes it.
This is an inherited database and I don't really know what it does. It is related to our (old but not quite redundant yet) Citrix farm (the database is called "Citrix"), but I do not know whether it is necessary.
Any suggestions appreciated - especially if you have knowledge of what the Citrix database does. E.g. would the simple recovery model be adequate for this application??
If you think it is a lost cause, say so politely please.
Thanks in advance
View 6 Replies
View Related
Sep 10, 2006
This is exactly what I do with the MS SQL 2005 Express-Advanced installer.
Accept>Next
Required Components Installed Successfully>Next
"Welcome to the....">Next
13 Success, 2 Warning: Minimum Hardware, IIS Feature Requirement>Next
Set name/company+hide advanced options>next
Accepted default install options>next
Windows Authentication>next
none checked>next
Install
ERROR: An installation package for the product Microsoft SQL Server Native Client cannot be found. Try the installation again using a valid copy of the installation package 'sqlncli.msi'.
Setup Failed: SQL Native Client, SQL Server Database Services.
I got the same problem with the non advanced installer, and I even selected all the options for the install using both. Why am I getting this error?!
View 3 Replies
View Related
Dec 19, 2003
I'm running a query, actually its an insert that works when using the TSQL below.
However when I try to use the debugger to step through and using the exact same values as those below I get the following error:
[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification
Its Killing me because everything else works, but this. Can somebody help.
DECLARE @NoteID INT,-- NULL OUTPUT,
@Note_Description NVARCHAR(3000),-- = NULL,
@Date DateTime,-- = NULL OUTPUT,
@ByWho NVARCHAR(30),-- = NULL,
@FK_Action_Performed NVARCHAR(40),-- = NULL,
@FK_UserID INT,-- = NULL,
@FK_JobID INT,-- = NULL,
@Job_Date DateTime,-- = NULL,
@Start DateTime,-- = NULL,
@Finish DateTime,-- = NULL,
@BeenRead NVARCHAR(10),-- = NULL
@FK_UserIDList NVARCHAR(4000)-- = NULL
--SET @NoteID = 409 --NULL OUTPUT,
SET @Note_Description = 'Tetsing'
--SET @Date DateTime = NULL OUTPUT,
SET @ByWho = 'GeorgeAgaian'
SET @FK_Action_Performed = 'Worked hard'
SET @FK_UserID = 5
SET @FK_JobID = 29
SET @Job_Date = 28/01/03
SET @Start = '1:00:20 PM'
SET @Finish = '1:00:20 PM'
SET @BeenRead = 'UnRead'
SET @FK_UserIDList = '1,2,3'
--AS
--SET NOCOUNT ON
SET NOCOUNT ON
SET XACT_ABORT ON
BEGIN TRANSACTION
SET @Date = GETDATE()
-- Insert Values into the customer table
INSERT Note (Note_Description,
Date,
ByWho,
FK_Action_Performed,
FK_UserID,
FK_JobID,
Job_Date,
Start,
Finish)
SELECT --@NoteID,
@Note_Description,
@Date,
@ByWho,
@FK_Action_Performed,
@FK_UserID,
@FK_JobID,
@Job_Date,
@Start,
@Finish
-- Get the new Customer Identifier, return as OUTPUT param
SELECT @NoteID = @@IDENTITY
-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned
-- users.
IF @FK_UserIDList IS NOT NULL
EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList
-- Insert New Address record
-- Retrieve Address reference into @AddressId
-- EXEC spInsertForUserNote
-- @FK_UserID,
--@NoteID,
-- @BeenRead
-- @Fax,
-- @PKId,
-- @AddressId OUTPUT
COMMIT TRANSACTION
--------------------------------------------------
GO
View 1 Replies
View Related
May 28, 2008
ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1
FROM testsupplierSCNCR
I am getting the result of 01/01/2007
but in query analizer I get the result of
12/31/2006
Why the different dates
View 4 Replies
View Related
Jan 22, 2001
Hi,
I get this error dialog when I try to open all the rows of any table from Enterprise manager..
Any help would be really appreciated..
Thanks,
-Srini.
View 1 Replies
View Related
May 24, 2007
SQL Server 2005 9.0.3161 on Win 2k3 R2
I receive the following error:
"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I have traced this to an insert statement that executes as part of a stored procedure.
INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)
VALUES (@journal_id, @acct_id, @acct_recv_id, @amount)
There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.
Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).
View 5 Replies
View Related
Mar 28, 2007
Hey, i've written a query to search a database dependant on variables chosen by user etc etc. Opened up a new sqldatasource, entered the query shown below and went on to the test query page. Entered some test variables, everything works as it should do. Try to get it to show in a datagrid on a webpage - nothing. No data shows.
SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches
FROM dbo.MAKES INNER JOIN
dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN
dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN
dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN
dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID
WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) )
GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID
HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2
ORDER BY count(*) DESC
Here is the page source
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="	SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches 	FROM dbo.MAKES INNER JOIN 				 dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN 				 dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN 				 dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN 				 dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID 	WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) 	GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID 	HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 	ORDER BY count(*) DESC ">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="ATT_ID1" PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="TextBox1" Name="VAL1" PropertyName="Text" />
<asp:Parameter Name="ATT_ID2" />
<asp:Parameter Name="VAL2" />
<asp:Parameter Name="ATT_ID3" />
<asp:Parameter Name="VAL3" />
<asp:Parameter Name="ATT_ID4" />
<asp:Parameter Name="VAL4" />
</SelectParameters>
</asp:SqlDataSource>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="SELECT * FROM [ATTRIBUTES]"></asp:SqlDataSource>
<br />
<asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource2"
DataTextField="ATTRIBUTE_NAME" DataValueField="ATTRIBUTE_ID">
</asp:DropDownList>
<asp:TextBox ID="TextBox1" runat="server" AutoPostBack="True"></asp:TextBox><br />
<br />
<br />
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="DERIVATIVE_ID"
DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="DERIVATIVE_ID" HeaderText="DERIVATIVE_ID" InsertVisible="False"
ReadOnly="True" SortExpression="DERIVATIVE_ID" />
<asp:BoundField DataField="Matches" HeaderText="Matches" ReadOnly="True" SortExpression="Matches" />
</Columns>
</asp:GridView>
</asp:Content>
AFAIK I have configured the source to pick up the dropdownlist value and the textbox value (the text box is autopostback).
Am i not submitting the data correctly? (It worked with a simple query...just not with this one). I have tried a stored procedure which works when testing just not when its live on a webpage.
Please help!
(Visual Web Devleoper 2005 Express and SQL Server Management Studio Express)
View 4 Replies
View Related
Aug 5, 2014
I have the following code.
SELECT _bvSerialMasterFull.SerialNumber, _bvSerialMasterFull.SNStockLink, _bvSerialMasterFull.SNDateLMove, _bvSerialMasterFull.CurrentLoc,
_bvSerialMasterFull.CurrentAccLink, _bvSerialMasterFull.StockCode, _bvSerialMasterFull.CurrentAccount, _bvSerialMasterFull.CurrentLocationDesc,
_bvSerialNumbersFull.SNTxDate, _bvSerialNumbersFull.SNTxReference, _bvSerialNumbersFull.SNTrCodeID, _bvSerialNumbersFull.SNTransType,
_bvSerialNumbersFull.SNWarehouseID, _bvSerialNumbersFull.TransAccount, _bvSerialNumbersFull.TransTypeDesc,
[code]...
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
View 2 Replies
View Related
Jun 15, 2007
I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.
Thanks in advance
Daniel Buchanan.
If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.
View 1 Replies
View Related
Jul 19, 2015
We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T
• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues
• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"
• We are using the last version of Excel Add-in
• We try to reinstall the MDS feature
• If I backup/restore MDS database to other server it works
• We updated to SQL 2012 SP2 + CU4 but the error persisted ...
Looking at the MDSTraceLog we are routed to the this msg
SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28
At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped
** Error found when try to get data from a entity using Excel add-in **
===================================
Sequence contains no elements
------------------------------
Program Location:
at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke()
at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)
[code]....
View 3 Replies
View Related
Jun 26, 2015
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120))
insert into #temptable
SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10
--column name
declare @cname varchar(30)
[code]...
View 4 Replies
View Related
Sep 22, 2015
-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!!
-- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"
set nocount on
go
if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1
if object_id('tempdb.dbo
[code]....
This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?
View 2 Replies
View Related
Apr 30, 2007
Hello everybody,
I'm developing a report using the following structure :
declare @sql as nvarchar(4000)
declare @where as nvarchar(2000)
set @sql = 'select ....'
If <conditional1>
begin
set @where = 'some where'
end
If <conditional2>
begin
set @where = 'some where'
end
set @sql = @sql + @where
exec(@sql)
I run it in query analyser and works fine, but when I try to run in Reporting Services, Visual studio stops responding and the cpu reaches 100 %.
I realize that when I cut off the if clauses, then it works at Reporting services.
Does anybody know what is happening?
Why the query works in query analyser and doesn't work in Reporting Service ?
Thanks,
Maurício
View 2 Replies
View Related
Oct 6, 2015
SQL Server 2012 Performance Dashboard Main advices me this:
Since the application is from a vendor and I have no control over its code, how can improve this sitation?
View 3 Replies
View Related
Jul 30, 2015
For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?
I want my output to be
CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc
Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.
I want to do it using SELECT. Is it possible?
View 13 Replies
View Related
Nov 15, 2007
do i need to nest a query in RS if i want a calculated column to be compared against a multi value variable? It looks like coding WHERE calcd name in (@variable) violates SQL syntax. My select looked like
SELECT ... ,CASE enddate WHEN null then 1 else 0 END calcd name
FROM...
WHERE ... and calcd name in (@variable)
View 1 Replies
View Related
Oct 30, 2015
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
<ParameterList>
<ColumnReference Column="@Measure" ParameterCompiledValue="'all'" />
</ParameterList>
</QueryPlan>
</StmtSimple>
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?
View 0 Replies
View Related
Mar 25, 2008
Hi all,
In the Programmability/Stored Procedure of Northwind Database in my SQL Server Management Studio Express (SSMSE), I have the following sql:
USE [Northwind]
GO
/****** Object: StoredProcedure [dbo].[SalesByCategory] Script Date: 03/25/2008 08:31:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[SalesByCategory]
@CategoryName nvarchar(15), @OrdYear nvarchar(4) = '1998'
AS
IF @OrdYear != '1996' AND @OrdYear != '1997' AND @OrdYear != '1998'
BEGIN
SELECT @OrdYear = '1998'
END
SELECT ProductName,
TotalPurchase=ROUND(SUM(CONVERT(decimal(14,2), OD.Quantity * (1-OD.Discount) * OD.UnitPrice)), 0)
FROM [Order Details] OD, Orders O, Products P, Categories C
WHERE OD.OrderID = O.OrderID
AND OD.ProductID = P.ProductID
AND P.CategoryID = C.CategoryID
AND C.CategoryName = @CategoryName
AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear
GROUP BY ProductName
ORDER BY ProductName
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:
Imports System.Collections.Generic
Imports System.ComponentModel
Imports System.Drawing
Imports System.Text
Imports System.Windows.Forms
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.Common
Imports System.Diagnostics
Public Class ConnectionPoolingForm
Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance
Public Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
'Force app to be available for SqlClient perf counting
Using cn As New SqlConnection()
End Using
InitializeMinSize()
InitializePerfCounters()
End Sub
Sub InitializeMinSize()
Me.MinimumSize = Me.Size
End Sub
Dim _SelectedConnection As DbConnection = Nothing
Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged
_SelectedConnection = DirectCast(lstConnections.SelectedItem, DbConnection)
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub DisableAllButtons()
btnAdd.Enabled = False
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
btnClearAllPools.Enabled = False
End Sub
Sub EnableOrDisableButtons(ByVal cn As DbConnection)
btnAdd.Enabled = True
If cn Is Nothing Then
btnOpen.Enabled = False
btnQuery.Enabled = False
btnClose.Enabled = False
btnRemove.Enabled = False
btnClearPool.Enabled = False
Else
Dim connectionState As ConnectionState = cn.State
btnOpen.Enabled = (connectionState = connectionState.Closed)
btnQuery.Enabled = (connectionState = connectionState.Open)
btnClose.Enabled = btnQuery.Enabled
btnRemove.Enabled = True
If Not (TryCast(cn, SqlConnection) Is Nothing) Then
btnClearPool.Enabled = True
End If
End If
btnClearAllPools.Enabled = True
End Sub
Sub StartWaitUI()
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
End Sub
Sub EndWaitUI()
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Sub
Sub SetStatus(ByVal NewStatus As String)
RefreshPerfCounters()
Me.statusStrip.Items(0).Text = NewStatus
End Sub
Sub btnConnectionString_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnConnectionString.Click
Dim strConn As String = txtConnectionString.Text
Dim bldr As DbConnectionStringBuilder = _ProviderFactory.CreateConnectionStringBuilder()
Try
bldr.ConnectionString = strConn
Catch ex As Exception
MessageBox.Show(ex.Message, "Invalid connection string for " + bldr.GetType().Name, MessageBoxButtons.OK, MessageBoxIcon.Error)
Return
End Try
Dim dlg As New ConnectionStringBuilderDialog()
If dlg.EditConnectionString(_ProviderFactory, bldr) = System.Windows.Forms.DialogResult.OK Then
txtConnectionString.Text = dlg.ConnectionString
SetStatus("Ready")
Else
SetStatus("Operation cancelled")
End If
End Sub
Sub btnAdd_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnAdd.Click
Dim blnError As Boolean = False
Dim strErrorMessage As String = ""
Dim strErrorCaption As String = "Connection attempt failed"
StartWaitUI()
Try
Dim cn As DbConnection = _ProviderFactory.CreateConnection()
cn.ConnectionString = txtConnectionString.Text
cn.Open()
lstConnections.SelectedIndex = lstConnections.Items.Add(cn)
Catch ex As Exception
blnError = True
strErrorMessage = ex.Message
End Try
EndWaitUI()
If blnError Then
SetStatus(strErrorCaption)
MessageBox.Show(strErrorMessage, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
Else
SetStatus("Connection opened succesfully")
End If
End Sub
Sub btnOpen_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnOpen.Click
StartWaitUI()
Try
_SelectedConnection.Open()
EnableOrDisableButtons(_SelectedConnection)
SetStatus("Connection opened succesfully")
EndWaitUI()
Catch ex As Exception
EndWaitUI()
Dim strErrorCaption As String = "Connection attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
End Sub
Sub btnQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click
Dim queryDialog As New QueryDialog()
If queryDialog.ShowDialog() = System.Windows.Forms.DialogResult.OK Then
Me.Cursor = Cursors.WaitCursor
DisableAllButtons()
Try
Dim cmd As DbCommand = _SelectedConnection.CreateCommand()
cmd.CommandText = queryDialog.txtQuery.Text
Using rdr As DbDataReader = cmd.ExecuteReader()
If rdr.HasRows Then
Dim resultsForm As New QueryResultsForm()
resultsForm.ShowResults(cmd.CommandText, rdr)
SetStatus(String.Format("Query returned {0} row(s)", resultsForm.RowsReturned))
Else
SetStatus(String.Format("Query affected {0} row(s)", rdr.RecordsAffected))
End If
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
End Using
Catch ex As Exception
Me.Cursor = Cursors.Default
EnableOrDisableButtons(_SelectedConnection)
Dim strErrorCaption As String = "Query attempt failed"
SetStatus(strErrorCaption)
MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)
End Try
Else
SetStatus("Operation cancelled")
End If
End Sub
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the code successfully and I got a box which asked for "Enter the query string".
I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.
Thanks in advance,
Scott Chang
View 4 Replies
View Related
Nov 7, 2007
I have two tables .. in one (containing user data, lets call it u).The important fields are:u.userName, u.userID (uniqueidentifier) and u.workgroupID (uniqueidentifier)The second table (w) has fieldsw.delegateID (uniqueidentifier), w.workgroupID (uniqueidentifier) The SP takes the delegateID and I want to gather all the people from table u where any of the workgroupID's for that delegate match in w. one delegateID may be tied to multiple workgroupID's. I know I can create a temporary table (@wgs) and do a: INSERT INTO @wgs SELECT workgroupID from w WHERE delegateID = @delegateIDthat creates a result set with all the workgroupID's .. this may be one, none or multipleI then want to get all u.userName, u.userID FROM u WHERE u.workgroupIDThis query works on an individual workgroupID (using another temp table, @users to aggregate the results was my thought, so that's included) INSERT INTO @users SELECT u.userName,u.userID FROM tableU u LEFT JOIN tableW w ON w.workgroupID = u.workgroupID WHERE u.workgroupID = @workGroupIDI'm trying to avoid looping or using a CURSOR for the performance hit (had to kick the development server after one of the cursor attempts yesterday)Essentially what I'm after is: SELECT u.userName,u.userID
FROM tableU u
LEFT JOIN tableW w ON w.workgroupID = u.workgroupID
WHERE u.workgroupID = (SELECT workgroupID from w WHERE delegateID = @delegateID) ... but that syntax does not work and I haven't found another work around yet.TIA!
View 1 Replies
View Related
Feb 12, 2008
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
View 3 Replies
View Related
Jan 7, 2002
I am trying to run queries against any of the user tables in my MS SQL 7.0 database. I get a message the Query Designer encountered a query error.
We have tried rebooting the SQL Server and I am still getting these messages. Also, the SQL error logs look fine - all database
maintenance are running successfully including the DBCCs which show no errors. Any help would be greatly appreciated as we are to go
into production in a few days.
View 2 Replies
View Related
Nov 23, 2004
How to optimize the following Stored procedure running on MSSQL server 2000 sp4 :
CREATE PROCEDURE proc1
@Franchise ObjectId
, @dtmStart DATETIME
, @dtmEnd DATETIME
AS
BEGIN
SET NOCOUNT ON
SELECT p.Product
, c.Currency
, c.Minor
, a.ACDef
, e.Event
, t.Dec
, count(1) "Count"
, sum(Amount) "Total"
FROM tb_Event t
JOIN tb_Prod p
ON ( t.ProdId = p.ProdId )
JOIN tb_ACDef a
ON ( t.ACDefId = a.ACDefId )
JOIN tb_Curr c
ON ( t.CurrId = c.CurrId )
JOIN tb_Event e
ON ( t.EventId = e.EventId )
JOIN tb_Setl s
ON ( s.BUId = t.BUId
and s.SetlD = t.SetlD )
WHERE Fran = @Franchise
AND t.CDate >= @dtmStart
AND t.CDate <= @dtmEnd
AND s.Status = 1
GROUP BY p.Product
, c.Currency
, c.Minor
, a.ACDef
, e.Event
, t.Dec
RETURN 1
END
GO
View 8 Replies
View Related
Jul 23, 2005
I am able to run a query which runs FAst in QA but slow in theapplication.It takes about 16 m in QA but 1000 ms on theApplication.What I wanted to know is why would the query take a longtime in the application when it runs fast on SQL server?How should we try debugging it?Ajay
View 2 Replies
View Related
Dec 22, 2006
Hi there. I have occasional sincronization error.-XSUBSYSTEM Merge
-XSERVER MYSERVER
-XCMDLINE 0
-XCancelEventHandle 000006E0
2006-12-22 14:55:00.833 Connecting to Subscriber 'Subscriber01'
2006-12-22 14:55:00.895 Connecting to Distributor 'Publisher01'
2006-12-22 14:55:02.974 Initializing
2006-12-22 14:55:03.083 Connecting to Publisher 'Publisher01'
2006-12-22 14:55:06.005 Retrieving publication information
2006-12-22 14:55:06.130 Retrieving subscription information.
2006-12-22 15:00:07.222 The merge process failed to execute a query because the query timed out. If this failure continues, increase the query timeout for the process. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
2006-12-22 15:00:07.456 Error converting data type nvarchar to numeric.
2006-12-22 15:00:07.800 Category:SQLSERVER
Source: Subscriber01
Number: 8114
Message: Error converting data type nvarchar to numeric.
After manual syncronization it goes under control.
Could anybody explain the relationship between converting error and timed out query?
If this is poor connection's problem how can I increase the query timeout for the process?
View 5 Replies
View Related
May 15, 2006
Hi Everyone:
*Before* I actually call up Microsoft SQL Customer Support Services and ask them, I wanted to ping other people to see if you have ever ran into this exact error
"Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I would have searched the forums myself, but at this moment in time, search is broken :(
If anyone has run into this error before, what conditions would exist that this could happen? That is, if I can sniff this out with suggestions from the community, I would be happy to do so.
It is an oddity because if I alter a couple subqueries in the where clause [ i.e., where tab.Col = (select val from tab2 where id='122') ]to not have subqueries [hand coded values], then the t-sql result is fine. It's not as if subqueries are oddities... I've used them when appropriate.
fwiw - Not a newbie t-sql guy. ISV working almost daily with t-sql since MS SQL 2000. I have never seen this message before...at least I don't recall ever seeing it.
Thanks in advance for other suggested examination paths.
View 10 Replies
View Related
Apr 11, 2008
Hi all I'm using Sql server 2000 and sometimes i need to run my Queries in Query analizer before using them in my application just to test them...BUT most of the time when i run a query in query-analizer for second time ,query analizer populates the result (records) more quicker then the first time. Apparently it caches the query !!! i don't know but for some reasons i dont't want this , so how can i prevent Query-analizer from doing so?
Thanks in advance. Regards.
View 4 Replies
View Related
Jun 5, 2008
I have a vb.net page that I need to display a list of employees who work in a specific office, based on a MatterID passed in a query string. But, I don't know how to get a value returned from one sql statement into a second. Here's what I'm trying to do...
From the QueryString, we know that the MatterID = 4 ( xxx.aspx?MatterID=4)
Knowing that the Matterid=4, I query the database to get the OfficeId for that MID (Select OfficeID from tMatter where Mid=4) ~This returns an OfficeID of 6
So, then I need to do another query to get the employees where OfficeID = 6 (Select EmployeeID from tEmployees where OfficeID = 6)
How do I do these in one query, or how do I use the Calculated Value for the OfficeID in the 2nd statement?
View 3 Replies
View Related
Aug 29, 2001
THis is so annoying. I have 3 ADO executes in my program. THe first one creates a view, the second one performs an outer join on that view and returns a result set, the third execute drops the aforementioned view. THe program that is using this is installed on about 200 computers scattered across Germany and Italy, all querying the same MSsql server 7.0. THe queries run quite quick when few users are actively using the program (after hours for example). however in the heat of the day performance goes up and down dramatically with identical queries taking from 1 to 20 seconds to return their result set. Now I initially thought 'bandwidth issue out of our server'. However I noticed that if I take those three queries and run them from the sql server enterprise manager( running on the same computer as the aforementioned program) then the queries run instantly and the data is in my result pane in less than 2 seconds ALWAYS....even when the program is dogging it with 20 second delays before the result set returns. I know it is hanging on the return of the result set as I put a stop after before each ADO execute in order to check which one was eating up my time. Why is there this dichotomy between running the queries from my enterprise manager versus running them from an ADO object. Both are using TCP/IP (no named pipes involved). I havent monkied with the attributes of the ADO result set so they are all set to default.
I have used the sql server profiler to trace these queries and they always run in less than 33 milliseconds. THe duration is also never more than 33 milliseconds. THis stinks of a network resource issue but what always leads me somewhere else is how consistent the performance of the enterprise manager is when it runs the exact same three queries.
Here is my slightly edited connection string
Public Const connection_string = "Provider=SQLOLEDB;Server=000.000.000.000;" & _
"User ID=johndoe;Password=janedoe;Network=dbmssocn;" & _
"database=fidojoe"
Here are the 3 ADO executes:
conn.Execute (sqlstr_create_view)
Set resultset1 = conn.Execute(sqlstr_get_providers_by_DMISID)
conn.Execute (sqlstr_drop_view)
View 3 Replies
View Related
Oct 30, 2006
I have successfully execute a union query. How can i create a make-table query to accomodate the resultset of the union query?
View 2 Replies
View Related
Mar 9, 2006
Hi,
Does anyone has query to give all table sizes on a database?
Appreciate your help.
Thanks
View 2 Replies
View Related
Feb 19, 2008
Hi Guys,
I've got a stored proc used for order generation which runs long sometimes when called from within our app. A normal run will complete within 20s, a long run will get terminated by the app at the 6 minute mark.
When it runs long once, repeated attempts will also do so until I execute the same query the app did, but from within Query Analyzer. At which time the problem will disappear for a day or two. The app connects to the SQL Server 200 SP4 database using ADO.
I suspected statistics might be at fault here but have tried both "UPDATE STATISTICS table WITH FULLSCAN" and "DBCC DBREINDEX('table') to no avail. This issue has occurred and been worked around in this manner a few dozen times.
Any idea what might be going on here?
View 7 Replies
View Related
