Hello,
How do you copy all stored procedures into a .sql file using Microsoft SQL server management studio?
I am trying to make a database installation file that should have all the tables and SP in it, can't find a
way to copy that information to a .sql file.
Patrick
How to convert a database in MSSQL 2000 to MSSQL 2005 database.Is there any tool or documentation available for this?
View 3 Replies View RelatedWhile attempting to set up sql replication in MSSQL 2005 one of my user databases is now in the systems database folder. I need to move it back to the user databases folder. Any help would be greatly appreciated.
View 16 Replies View RelatedHello, im shure this must have been up before and i apologize for that. But i wonder if there is a way to convert the SQL server express databases to MSSQL 2005 databses?
View 3 Replies View RelatedDB is developed on local computer with MSSQL 2005 Express. My host is on MSSQL 2005 workgroup. Are they compatible, because I am getting errors? Is my approach wrong?
I have tried several approaches.
A) I created a backup of database on my local, then placed a copy on the server. Then I tried to restore through Server Management Studio. I get this error.
TITLE: Microsoft SQL Server Management Studio
------------------------------
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
The backed-up database has on-disk structure version 611. The server supports version 539 and cannot restore or upgrade this database.
RESTORE FILELIST is terminating abnormally. (Microsoft SQL Server, Error: 3169)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.2039&EvtSrc=MSSQLServer&EvtID=3169&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
B: I also have tried copying the database. I put it in the same path as the other databases that can be read with server management studio on the server. Then, tried to get to it through server managements studio and it did not appear. So I tried to attach it. Then I received this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MROACH1'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Could not find row in sysindexes for database ID 10, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes.
Could not open new database 'LodgingDB'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 602)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=602&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
C: I have also tried opening the Database, and back up file through Server Management Studio. without success.
D: I also tried Windows and Software update at microsoft update, but no updates were recommended for Version on Server.
I'm surprised this is so hard. My original data base was created in same family of software. 2005 MS SQL Express. I could use some direct help from someone experienced with this. Am I doing it wrong or are the DB versions incompatible.
Mark Roach
I'm pretty new at this so bear with med
I've made af site in Visual Web Developer. On that site i've made a database and it worked finde when I first uploaded it to my FTP as a database file on the server. But due to security problems, my web hotel host has deactivated that possibility. Så now I have to put my data and tables into the MSSQL 2005 Database the host uses. Now here's the problem.
1: How do I do that?
2: How do I get tha tables I've made i Visual Web Developer over in SQL Server Management Studio Express så that I can upload it?
I have a MS 2003 server where the os adminstrator has loaded the tools for a MSSQL 2005 but not the instance.
I went in to add the component via the Add & remove programs and selected Microsoft SQL Server 2005.
Selected change
I entered the path for the cd but only get the setup.exe for the components; sql mangement studio....
what is the path to install the Database Engine component.... inorder to load a new default instance?
osbornet
I'm running 2000 databases in a 2005 server. Can anyone tell me if there are adverse effects in doing this?
As I understand it, the 2005 performance benefits are available to databases running as 2000(Ver80) But some of the new futures may not be available..
And any documentation from Microsoft/white papapers regarding this subjects are appreciated..
Hello all,i'm moving all my development to the new 2005/Fw2 environment.Now, i have an MSSQL 2005 server on the development server. To restore an existing database, i've created a new database with MSSQL 2000 compatibility level, and i've restored the backup over it. Everything seems ok, but when i try to create a diagram, i get the following error message:"Database diagram support objects cannot be installed because the database does not have a valid owner. To continue, first use the Files page of the Database Properties dialog box or the ALTER AUTHORIZATION statement to set the database owner to a valid login, then add the database diagram support objects."I've checked the properties and there seems to be the right owner (sa). If i create a new database with 2005 compatibility level, everithing works fine.Where is the problem?Also, a side question: by setting compatibility level to 2000, is it correct that the database can be deployed to a 2000 Server environment with no problems?Thanks in advance for any advice. -LV
View 4 Replies View RelatedI have been trying to export an sql2000 database to sql2005 with no luck. I continuosly get the error
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
I have looked upon all support material and have installed the latest sql2005 service pack, but this has not fixed the problem. a simple query as:
select * from [transaction] ta,transactionentry tr
where tr.transactionnumber=ta.transactionnumber and
glacctid=6 and ta.[time]> '3/01/2006'
would produce this fatal error.
the current version I am using is:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
This problem is happening on some of the most important tables in the database.
the error log contains the following:
2006-06-06 11:43:32.59 spid54 ***Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLDump0001.txt
2006-06-06 11:43:32.59 spid54 SqlDumpExceptionHandler: Process 54 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
2006-06-06 11:43:32.59 spid54 * *******************************************************************************
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 * BEGIN STACK DUMP:
2006-06-06 11:43:32.59 spid54 * 06/06/06 11:43:32 spid 54
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 * Exception Address = 0136B4F0 Module(sqlservr+0036B4F0)
2006-06-06 11:43:32.59 spid54 * Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
2006-06-06 11:43:32.59 spid54 * Access Violation occurred writing address FFFFFFFC
2006-06-06 11:43:32.59 spid54 * Input Buffer 260 bytes -
2006-06-06 11:43:32.59 spid54 * select * from [transaction] tr,transactionentry te where tr.
2006-06-06 11:43:32.59 spid54 * transactionnumber = te.transactionnumber and glacctid = 6
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 * MODULE BASE END SIZE
2006-06-06 11:43:32.59 spid54 * sqlservr 01000000 02BA7FFF 01ba8000
2006-06-06 11:43:32.59 spid54 * ntdll 7C800000 7C8BFFFF 000c0000
2006-06-06 11:43:32.59 spid54 * kernel32 77E40000 77F41FFF 00102000
2006-06-06 11:43:32.59 spid54 * MSVCR80 78130000 781CAFFF 0009b000
2006-06-06 11:43:32.59 spid54 * msvcrt 77BA0000 77BF9FFF 0005a000
I have followed instructions on some support issues posted but none have helped. If anyone has any solution to this problem PLEASE HELP!!!!.
Thanks.
Does enabling/disabling Data Execution Prevention have a performanceimpact on SQL 2000 or SQL 2005?For SQL best performance - how should I configure for:Processor Scheduling:Programs or Background servicesMemory Usage:Programs or System Cache
View 9 Replies View RelatedHi,
I am a bit new to the MSSQL server. In our application, we use so many SQL queries. To imporve the performance, we used the Database enigine Tuning tool to create the indexes. The older version of the application supports MSSQL 2000 also. To re-create these new indexes, I have an issue in running these "CREATE INDEX" commands as the statements generated for index creation are done in MSSQL 2005. The statements include "INCLUDES" keyword which is supported in MSSQL 2005 but not in MSSQL 2000.
Ex:-
CREATE INDEX IND_001_PPM_PA ON PPM_PROCESS_ACTIVITY
(ACTIVITY_NAME ASC, PROCESS_NAME ASC, START_TIME ASC, ISMONITORED ASC)
INCLUDE
(INSTANCE_ID, ACTIVITY_TYPE, STATUS, END_TIME, ORGANIZATION);
Any help in creating such indexes in 2000 version is welcome.
Thanks,
Suresh.
Hello
We are using SQL 2005 and now we are planning to use SQL 2000. what are the ways to do the process.
We taken the script spcificall for 2000 and run it in SQL 200. But we are getting the error in SCRIPT?
Could you please give me the step to do?
Thanks,
Sankar R
Hi!
What is the best way to migrate MSSQL 2005 Express -> MSSQL 2005 Srv?
Hi,
i was planning to create a database migration tool ..
its a certain database of a DMS (document management system) to
another DMS (two different DMS)... from DMS using msde 2000 server .. and tranfer to a DMS using a postgre sql or mssql .. depends ..
they have different table structures and names . . :D
i was thing of what language shall i use.. or what language is the best to work on this kind of project :)
hoping for your kind help guys. thanks :)
br
Frozenice
Ben writes "I have a sql script that doesn't function very well when it's executed on a SQL 2000 server.
The scrpt looks like this:
---------------------------------------------------------------------------------------------------
USE [master]
GO
IF NOT EXISTS (SELECT * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME')
EXEC sp_addlogin N'SSDBUSERNAME', N'SSDBPASSWORD'
GO
GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME]
GO
GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME]
GO
GRANT CONNECT SQL TO [SSDBUSERNAME]
GO
GRANT CONTROL SERVER TO [SSDBUSERNAME]
GO
GRANT CREATE ANY DATABASE TO [SSDBUSERNAME]
GO
USE [master]
GO
If EXISTS (Select * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME')
ALTER LOGIN [SSDBUSERNAME] WITH PASSWORD=N'SSDBPASSWORD'
GO
GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME]
GO
GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME]
GO
GRANT CONNECT SQL TO [SSDBUSERNAME]
GO
GRANT CONTROL SERVER TO [SSDBUSERNAME]
GO
GRANT CREATE ANY DATABASE TO [SSDBUSERNAME]
GO
USE [master]
GO
IF EXISTS (select * from dbo.sysdatabases where name = 'ISIZ')
DROP DATABASE [ISIZ]
GO
USE [SurveyData]
GO
exec sp_adduser 'SSDBUSERNAME'
GRANT INSERT, UPDATE, SELECT, DELETE
TO SSDBUSERNAME
GO
USE [SurveyManagement]
GO
exec sp_adduser 'SSDBUSERNAME'
GRANT INSERT, UPDATE, SELECT, DELETE
TO SSDBUSERNAME
---------------------------------------------------------------
I need to be converted to a script that can be executed on both MSSQL 2000 and MSSQL 2005.
I was wondering if somebody there could help me with this problem?!
Thanks,
Ben"
I've been tasked to move our production databases on MSSQL 2000 to 2005. I've supported MSSQL since version 6.5 and performed migrations to successor versions.
Current Environment is MSSQL 2000 32-bit with current Service Packs.
I've performed mock migrations on Test servers upgrading all Production instances simultaneously from MSSQL 2000 to 2005 32-bit. The Test environment is identical to Production minus server name, IP etc. Also I have a separate server with MSSQL 2005 installed where I use the DETACH / ATTACH and BACKUP / RESTORE method for migration / acceptance testing. There are approximately 30 databases totaling 70 GB. This has gone as expected and fairly successful. Vendors have been coordinated with to update code and staff for acceptance testing.
I'd prefer going directly to MSSQL 2005 64-bit instead if possible due to memory benefits etc. This is where I'd like some feedback prior to borrowing a 64-bit server for testing.
Upgrade options:
1. Is it better to migrate from MSSQL 2000 32-bit to 2005 64-bit via:
a. DETACH / ATTACH
b. BACKUP / RESTORE
c. Is one method more advantageous relating to the end result?
2. Regarding XP clients, have issues been experienced with the default SQL Server driver or is an alternate recommended for XP clients to connect to a MSSQL 64-bit server databases?
3. If you have performed this migration and have relevant experience please pass them along.
Does anyone have any basic, simple scripts of sp's that I can give mycomputer operators to use to monitor for serious conditions on our sqlservers? We are new in the ms-sql arena, a small shop and we cantreally purchase any tools to monitor these servers, but we need somebasic checks that we can use to make sure a server is performing in areasonable fashion, no blocks, cpu<xx%, memory not pegged, IO working,etc...and we need to be able to do this without bugging ourprogrammers every time we are wondering why things are slowwnig down.We are a split shop between as400s and sql servers, and our operationsstaff has no problem performing this type of duty on the 400s. I thinksince the sql servers are so easy to deploy into production, the ideaof how to monitor these things health got lost in the shuffle andallowing the programmers to do it just serves to destabilize ourenvironment.Please help! Our shop has turned to chaos since we went live withMSSQL centric applications and everytime one programmer "resolves anissue" some other programmers application starts to act up.
View 6 Replies View RelatedHi,
for some reason, when I've installed visual studio 2005, I didn't install also SQL server.
Than I've updated VS with Service Pack 1 (thank god, I was trying unsucesfully for about 2 weeks :/ ).
Than I want to install MSSQL 2005 and an error came up:
Message displayed to user
SQL Server 2005 Setup has detected incompatible components from beta versions of Visual Studio, .NET Framework, or SQL Server 2005. Use Add or Remove Programs to remove these components, and then run SQL Server 2005 Setup again. For detailed instructions on uninstalling SQL Server 2005, see the SQL Server 2005 Readme.
SQL Server Setup has detected that the following required component is not installed: Microsoft Windows Installer 3.1. To proceed, download and install the Windows Installer 3.1 Redistributable from http://go.microsoft.com/fwlink/?LinkId=50380 , and then run SQL Server Setup again.
1. The http link leads to main page of MS Download Centre.
2. I have Installer 3.1. (version of file c:windowssystem32msiexec.exe said so)
3. I really do not have any beta version of any mentioned SW. I never had.
So I think the issue could be, that installer is checking for not updated version of Visual Studio.
(I was searching through net/msdn and seems no one had this problem (maybe wrong keywords, though) ).
I'm running setup.exe from CD1.
Uninstalling of VS Service Pack 1 is not an option. I really don't want to spent another week by installing it.
Please tell that there is some another way :) .
Thanks a lot.
Here are some logs:
SQLSetup0001_COMP_Datastore.xml
<Datastore>
<Scope Type="SetupBootstrapOptionsScope" Id="2336">
<Property Id="QuietSwitchPresent">0</Property>
<Property Id="LogSwitchPresent">0</Property>
<Property Id="ErrorReporting">0</Property>
<Property Id="DeleteManifestFileMode">1</Property>
<Property Id="MultiInstanceEnabled">0</Property>
<Property Id="ComponentUpdateOnly">0</Property>
<Property Id="ReducedUI">0</Property>
<Property Id="PatchedSetup">0</Property>
<Property Id="LocalSetup">0</Property>
<Property Id="InitiateReboot">0</Property>
<Property Id="HostSetup">1</Property>
<Property Id="RemoteMode">0</Property>
<Property Id="Remote">0</Property>
<Property Id="LoosenedSccChecks">{ }</Property>
<Property Id="DisabledSccChecks">{ }</Property>
<Property Id="LocalRebootPending">1</Property>
<Property Id="CmdLine">********</Property>
<Property Id="InstallMediaPath">Y:</Property>
</Scope>
<Scope Type="SetupStateScope" Id="">
<Property Id="machineName">COMP</Property>
<Property Id="logDirectory">C:Program FilesMicrosoft SQL Server90Setup BootstrapLOG</Property>
<Property Id="logSummaryFilename">C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt</Property>
<Property Id="logSequenceNumber">1</Property>
<Property Id="primaryLogFiles">{ ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0001_COMP_Core.log"], ["C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt"] }</Property>
<Property Id="watsonFailedAction">PerformSCCAction2</Property>
<Property Id="watsonFailedActionErrorCode">87</Property>
<Property Id="watsonFailedFunction">sqls::PerformSCCAction::perform</Property>
<Property Id="watsonFailedFunctionErrorCode">87</Property>
<Property Id="watsonSourceFileAndLineNo">setupsqlsetupactions.cpp@1390</Property>
<Property Id="watsonModuleAndVersion">setup.exe@2005.90.1399.0</Property>
<Property Id="watsonMsi">None</Property>
<Property Id="watsonMsiAndVersion">None</Property>
<Property Id="watsonSourceFile">setupsqlsetupactions.cpp</Property>
</Scope>
</Datastore>
SQLSetup0001_COMP_Core.log
Microsoft SQL Server 2005 Setup beginning at Wed Mar 14 18:23:08 2007
Process ID : 2336
Y:setup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2007/2/14 18:23:8
Complete: LoadResourcesAction at: 2007/2/14 18:23:8, returned true
Running: ParseBootstrapOptionsAction at: 2007/2/14 18:23:8
Loaded DLL:Y:xmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2007/2/14 18:23:8, returned true
Running: ValidateWinNTAction at: 2007/2/14 18:23:8
Complete: ValidateWinNTAction at: 2007/2/14 18:23:8, returned true
Running: ValidateMinOSAction at: 2007/2/14 18:23:8
Complete: ValidateMinOSAction at: 2007/2/14 18:23:8, returned true
Running: PerformSCCAction at: 2007/2/14 18:23:8
Complete: PerformSCCAction at: 2007/2/14 18:23:8, returned true
Running: ActivateLoggingAction at: 2007/2/14 18:23:8
Complete: ActivateLoggingAction at: 2007/2/14 18:23:8, returned true
Delay load of action "DetectPatchedBootstrapAction" returned nothing. No action will occur as a result.
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__2336" returned false.
Running: PerformSCCAction2 at: 2007/2/14 18:23:8
Error: Action "PerformSCCAction2" threw an exception during execution.
Return Code: 87
Message displayed to user
SQL Server 2005 Setup has detected incompatible components from beta versions of Visual Studio, .NET Framework, or SQL Server 2005. Use Add or Remove Programs to remove these components, and then run SQL Server 2005 Setup again. For detailed instructions on uninstalling SQL Server 2005, see the SQL Server 2005 Readme.
SQL Server Setup has detected that the following required component is not installed: Microsoft Windows Installer 3.1. To proceed, download and install the Windows Installer 3.1 Redistributable from http://go.microsoft.com/fwlink/?LinkId=50380 , and then run SQL Server Setup again.
Class not registered.
Running: UploadDrWatsonLogAction at: 2007/2/14 18:23:9
Message pump returning: 87
We have a Prinicipal, a Mirror and a Witness server. We have automatic failover configured between the Prinicipal and Mirrored server. When we stop MMSQL service on Prinicipal, not all the databases failover to the Mirrored instance.
Any suggestions would be welcomed as we have a tight deadline to get this in Production.
Hi All,Can u please suggest me some books for relational database design ordatabase modelling(Knowledgeable yet simple) i.e. from which we couldlearn database relationships(one to many,many to oneetc.....),building ER diagrams,proper usage of ER diagrams in ourdatabase(Primary key foreign key relations),designing smallmodules,relating tables and everything that relates about databasedesign....Coz I think database design is the crucial part of databaseand we must know the design part very first before starting up withdatabases.....Thanks and very grateful to all of you....Vikas
View 3 Replies View RelatedI am new to ms SQL. I only have the use of the Enterprise Manager.
Creating tables I understand. However I am confused on how to add data to
a table or view the data in a table. Can this be done through Enterprise Manager? If I am adding a large amount of data do I have to use the query window. This seems like a tedious method. In Access yo have a form basically pop up where you can type in the record sets. Any advice would be appreciated! Sincerely,
Bill Bequette
Would any body be able to suggest the best way switch a Lotus .nsf file to Ms SQL database or even to an Access?
I have a .nsh file that I am able to see the contents of but not the database structure, and rather then rebuilding the database and manually inserting the content I would like to import all the information from an old .nsf file that appears to have restriction on it.
Any Suggestions
Hi Guys.If i didnt use MSSQL 2005 Express (say my database was bigger than 4 gig), what license would i need to get for the full version?I'm slightly confused with the CALS (who isnt?).If its on the same server and only IIS / asp.net accessing the database do I only need say 2 CALS?1 for read only1 for read / writewhich I then use ASP.NET to talk to the database?Or do I have to get a per processor license.I would appreciate any help
View 2 Replies View RelatedHi!
How can i convert this code to work with MsSQL 2005?
/Tomas
Partial Class skaalb
Inherits System.Web.UI.Page
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim strConnectionString As String
Dim strQuery As String
Dim MyConnection As OdbcConnection
Dim myCommand As OdbcCommand
Dim path As String = Server.MapPath("~/album") & "/"
Dim albName As String = Trim(Replace(txtAlbum.Text, "'", "''"))
Dim folderName As String = Trim(Replace(txtAlbum.Text, "'", "''"))
folderName = Replace(folderName, " ", "_")
Try
If Not My.Computer.FileSystem.DirectoryExists(path & folderName) Then
My.Computer.FileSystem.CreateDirectory(path & folderName)
labelStatus.Text = "Folder <b>" & folderName & "</b> created!"
Dim Beskrivning As String = Trim(Replace(txtBeskrivning.Text, "'", "''"))
strConnectionString = "DRIVER={MySQL ODBC 3.51 Driver}; SERVER=xxxxxxxx; DATABASE=xxxxxxx; UID=xxxxxxxx; PASSWORD=xxxxxxxxx; OPTION=3"
MyConnection = New OdbcConnection(strConnectionString)
MyConnection.Open()
strQuery = "INSERT INTO tbl_albumet(alb_Namn, alb_Beskrivning, alb_Mapp) VALUES (?, ?, ?)"
myCommand = New OdbcCommand(strQuery, MyConnection)
myCommand.Parameters.AddWithValue("?", albName)
myCommand.Parameters.AddWithValue("?", Beskrivning)
myCommand.Parameters.AddWithValue("?", folderName)
myCommand.ExecuteNonQuery()
MyConnection.Close()
Else
labelStatus.Text = "Folder excist, pick another name!"
End If
Catch ex As Exception
labelStatus.Text = "Unable to create folder!"
End Try
End Sub
End Class
Hi ,
I use MSsql server 2005 with the compatability mode set to 2000.One of the tables, has an IDENTITY Column.I need to restore a earlier backed copy of the table.So, i did the following :
set IDENTITY_INSERT MYTABLE ON
insert into MYTABLE(ID,NAME) values(23,'XYZ')
However, i get the following error :
[Error Code: 544, SQL State: S0001] Cannot insert explicit value for identity column in table 'MYTABLE' when IDENTITY_INSERT is set to OFF.
Can anyone tell me why the set IDENTITY_INSERT does not work ? I need to disable the IDENTITY, do the restore and then enable the IDENTITY again.Also, i need to be able to do this only thorugh SQL issued via JDBC.Please help.
Thanks,
Hi ,
I use MSsql server 2005 with the compatability mode set to 2000.One of the tables, has an IDENTITY Column.I need to restore a earlier backed copy of the table.So, i did the following :
set IDENTITY_INSERT MYTABLE ON
insert into MYTABLE(ID,NAME) values(23,'XYZ')
However, i get the following error :
[Error Code: 544, SQL State: S0001] Cannot insert explicit value for identity column in table 'MYTABLE' when IDENTITY_INSERT is set to OFF.
Can anyone tell me why the set IDENTITY_INSERT does not work ? I need to disable the IDENTITY, do the restore and then enable the IDENTITY again.Also, i need to be able to do this only thorugh SQL issued via JDBC.Please help.
Thanks,
Charu.
Code:
Select id from tbl_account in Game_User DB
id is binary data
USE Billing
INSERT INTO tblUser (userId,cpId,userTypeId,userStatusId,gameServiceId) VALUES ('test','1','1','9','6') where userId = id from tbl_account
and
INSERT INTO tblUserInfo (userNumber,userId,cpId,userTypeId,userStatusId,gameServiceId) VALUES ('123','test','1','1','9','6') where userNumber = userNumber and userId = userId from tblUser
Im new when it comes to making SQL queries, so i need help badly.
Basically what i need the query to do is call from a DB "User" id where the id is in Binary data. from that i need it to insert into 2 other tables in the Billing DB.
the UserId needs to be the same in all areas, and when it inserts into tblUserInfo it has to pull from userNumber from tblUser after the rows are entered so that the userNumber in tblUser and tblUserInfo are the same.
Hopefully you can help. if any further information is needed please just ask and ill try to give as much as i know.
Thanks
David
First off, Devshed is a great place to find information for development. I'm on here daily looking through threads, finding answeres
I'm building a backend for a program that uses msSql 2005 and ODBC .
I'm trying to insert into a table, and it is working, but i would like to find a solution to this error i get from the odbc trace:
Calc f54-5c4ENTER SQLExecute
HSTMT 00924A18
Calc f54-5c4EXIT SQLExecute with return code -1 (SQL_ERROR)
HSTMT 00924A18
DIAG [22018] [Microsoft][SQL Native Client]Invalid character value for cast specification (0)
when i try to insert a value of 0 (zero) into a column that is bound as a double it gives this error.
And one more thing:
if(retcode != SQL_SUCCESS | SQL_SUCESS_WITH_INFO)
shouldnt that work? (if Retcode isnot success OR success_with_info)
Any input would be greatly appreciated!
thanks
Hi List,I am searching franticly for a solution (or the procedure) to settingthe coding of a new DB to UTF-8. I can find no setting in the ServerManager, during creation of the DB, to influence this. Can someoneplease show me the way? Thanks--Shawn
View 3 Replies View Relatedhi all,
My company has finally decided to go with MSSQL 2005.
now i havent used mssql since version 7.. which was a while ago..
whats the difference in terms of the setup and the easy of use ?
I've purchased and installed SQL Server 2005 along with some licenses and I now have a 'Microsoft Open License Confirmation Letter' in my inbox.
How do I add these licenses to SQL Server and get them active?
How do I check to see how many licenses SQL Server contains?
Hello! I'm installing the MSSQL 2005.
View 24 Replies View Related