Smo Error During Snapshot Creation
Jul 12, 2007
sql version 9.00.3042 on both source and dest servers. the publication has a single article, a table w/ an xml column. when the initial snapshot runs we get the following, any ideas?
Error messages:
Source: Microsoft.SqlServer.Smo
Target Site: System.Collections.Specialized.StringCollection ScriptWithList(Microsoft.SqlServer.Management.Smo.DependencyCollection, Microsoft.SqlServer.Management.Smo.SqlSmoObject[])
Message: Script failed for Table 'dbo.GatewayHeader'.
Stack: at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithList(DependencyCollection depList, SqlSmoObject[] objects)
at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateLogBasedArticleSchScript(Scripter scripter, BaseArticleWrapper articleWrapper, Table smoTable)
at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateLogBasedArticleScripts(ArticleScriptingBundle articleScriptingBundle)
at Microsoft.SqlServer.Replication.Snapshot.TransSmoScriptingManager.GenerateArticleScripts(ArticleScriptingBundle articleScriptingBundle)
at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.GenerateObjectScripts(ArticleScriptingBundle articleScriptingBundle)
at Microsoft.SqlServer.Replication.Snapshot.SmoScriptingManager.DoScripting()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.DoScripting()
at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot()
at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun()
at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: Microsoft.SqlServer.Smo, Error number: 0)
Get help: http://help/0
Source: Microsoft.SqlServer.Smo
Target Site: Void CheckTargetVersion(Microsoft.SqlServer.Management.Smo.SqlServerVersionInternal, Microsoft.SqlServer.Management.Smo.SqlServerVersionInternal)
Message: Either the object or one of its properties is not supported on the target server version.
Stack: at Microsoft.SqlServer.Management.Smo.SqlSmoObject.CheckTargetVersion(SqlServerVersionInternal targetVersion, SqlServerVersionInternal upperLimit)
at Microsoft.SqlServer.Management.Smo.UserDefinedDataType.GetTypeDefinitionScript(ScriptingOptions so, SqlSmoObject oObj, String sTypeNameProperty, Boolean bSquareBraketsForNative)
at Microsoft.SqlServer.Management.Smo.UserDefinedDataType.AppendScriptTypeDefinition(StringBuilder sb, ScriptingOptions so, SqlSmoObject oObj, SqlDataType sqlDataType)
at Microsoft.SqlServer.Management.Smo.Column.ScriptDdlCreateImpl(StringBuilder sb, ScriptingOptions so)
at Microsoft.SqlServer.Management.Smo.Column.ScriptDdl(StringCollection queries, ScriptingOptions so)
at Microsoft.SqlServer.Management.Smo.Table.ScriptTableInternal(ScriptingOptions so, StringBuilder sb, ColumnCollection columns, IndexCollection indexes)
at Microsoft.SqlServer.Management.Smo.Table.GetTableCreationScript(ScriptingOptions so, StringBuilder sb)
at Microsoft.SqlServer.Management.Smo.Table.ScriptCreate(StringCollection queries, ScriptingOptions so)
at Microsoft.SqlServer.Management.Smo.SqlSmoObject.ScriptCreateInternal(StringCollection query, ScriptingOptions so)
at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithListWorker(DependencyCollection depList, SqlSmoObject[] objects)
at Microsoft.SqlServer.Management.Smo.Scripter.ScriptWithList(DependencyCollection depList, SqlSmoObject[] objects) (Source: Microsoft.SqlServer.Smo, Error number: 0)
Get help: http://help/0
Jonathan
Gaming will never be the same
View 1 Replies
ADVERTISEMENT
Oct 16, 2007
I'm running SQL Server 2005 SP2 64bit under Windows Server 2003 64 bit
The system is the replication distributor as well. Transactional replication.
But I can't create the snapshot!
I have run snapshot.exe repeteadly with all parameters in a command prompt and it crashes at various BCP percentages.
The error is like this:
2007-10-16 00:38:56.32 [10%] Bulk copied snapshot data for article 'Dictionary (part 14 of 20)' (1656 rows).
2007-10-16 00:38:56.32 [10%] The replication agent had encountered an exception.
2007-10-16 00:38:56.32 Source: Replication
2007-10-16 00:38:56.32 Exception Type: Microsoft.SqlServer.Replication.NativeSqlConnectionException
2007-10-16 00:38:56.32 Exception Message: Data conversion failed
2007-10-16 00:38:56.32 Message Code: 02007-10-16 00:38:56.32
2007-10-16 00:38:56.32 Call Stack:
2007-10-16 00:38:56.32 Microsoft.SqlServer.Replication.NativeSqlConnectionException: Data conversion failed
2007-10-16 00:38:56.32 at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.ThrowNativeBcpOutException(CConnection* pNativeConnectionWrapper)
2007-10-16 00:38:56.32 at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint, String strWhereClause)
2007-10-16 00:38:56.32 at Microsoft.SqlServer.Replication.Snapshot.SqlServer.BcpOutThreadProvider.DoWork(WorkItem workItem)
2007-10-16 00:38:56.32 at Microsoft.SqlServer.Replication.WorkerThread.NonExceptionBasedAgentThreadProc()
2007-10-16 00:38:56.32 at Microsoft.SqlServer.Replication.MainWorkerThread.AgentThreadProc()
2007-10-16 00:38:56.32 at Microsoft.SqlServer.Replication.AgentCore.BaseAgentThread.AgentThreadProcWrapper()
2007-10-16 00:38:56.33 [10%] Bulk copied snapshot data for article 'Dictionary (part 15 of 20)' (1487 rows).
2007-10-16 00:38:56.33 [10%] Bulk copying snapshot data for article 'Dictionary (part 20 of 20)'
the fact that BCP continues to copy data after the error makes me believe the crash occurs somewhere else.
How can I isolate the offending table?
Can I capture the BCP commands issued?
Any insight will be appreciated.
View 5 Replies
View Related
Aug 3, 2007
Hi everyone!
I'm finalizing our merge replication apps but we encountered some problem with the setup. We need to create a parameterized filter publication of 30+ articles. Most of the articles/tables contains large amount of existing data. One of them contains more than 20 millions records. during the creation of snapshot, the snapshot agent runs for a while and it will hang the process. The whole system cant seem to response anymore.
I tried on the other 25 articles with less data, everything was fine. is 20 million too much for snapshot?
Can anyone help me on this?
Thanks
Ben
View 1 Replies
View Related
Aug 13, 2007
Hi,
I've got a SSIS script task for which i'm getting this error:
Report execution or history settings prohibit snapshot creation or updates.
Public Sub Main()
Dim rs As New ReportingService()
rs.Credentials = System.Net.CredentialCache.DefaultCredentials
rs.UpdateReportExecutionSnapshot("/SQL_DBA/SQL_DBA_SSIS_TI_REPORT")
rs = Nothing
Dts.TaskResult = Dts.Results.Success
End Sub
On the report history I've got this checked:
Allow report history to be created manually
Any ideas? I can't find any info on this error
Thanks!
Sam
View 1 Replies
View Related
Jan 5, 2007
Hi,
I am facing some issues while creating report snapshots programmatically using axis (Java platform for creating and deploying web services applications).
To create a report snapshot what should be the methods called ? I tried using UpdateReportExecutionSnapshot() but didn't find any parameters to set the schedule information which would say when the execute the report snapshot. Can you please guide me for this ?
Also I had one more doubt regarding report snapshots. If a parameterized report is configured as snapshot then we would require to set default parameters for the report.
Is there a way to create snapshots of the same report with different parameters ?
eg : The employee information report displays the information based on the employee id taken as a parameter. So is it possible to create snapshots with different employee id's ?
Thanks,
Amit Shah.
View 7 Replies
View Related
Jun 13, 2008
I am trying to create New Connection using "Microsoft SQL Server Database File" as Data source. However, I get the following error:You don't have permission to open this file. I am using SQL Server 2005, developing a website in ASP.NET 2.0 and using Vista as OS.
View 1 Replies
View Related
Feb 1, 2006
Afternoon All
Hoping someone will be able to give me a little advice. I accidently delted a view from one of our application databases (Like you do!!).
I actually repliacated the database 2 month ago onto another server to do some testing. Me thinking I was clever decided to go to the copied database and copy the "syntax" for creating the view and then run it on the database I deleted the view but I get the following message I can't for the life of me work out what the problem is.
Has anyone seen this before ??
Server: Msg 207, Level 16, State 3, Procedure VP_TIMESHTPUNV42, Line 2
Invalid column name 'NAME'.
Server: Msg 207, Level 16, State 1, Procedure VP_TIMESHTPUNV42, Line 2
Invalid column name 'NAME'.
View 3 Replies
View Related
Apr 9, 2002
I get the following error message in the job history for
synchronization between two SQL 7 machines across the
network.
The process could not read file 'acct.sch' due to OS error
1231.
Is there something to fix this? It has been running fine
for almost 2 years and suddenly quit. There is a firewall
on both sides, if that helps.
TIA,
Cami
View 3 Replies
View Related
Jun 20, 2007
Hi
I seem to have a strange problem when applying a snapshot when the tables in the publication have been updated while the snapshot was being generated.
Say for example there is a table called RMAReplacedItem in the publication. When the snapshot starts being applied to the subscriber, a stored procedure called sp_MSins_RMAReplacedItem_msrepl_css gets created that handles an insert if the row already exists (ie it updates the row rather than inserting it). However, after all the data has been loaded into the tables, instead of calling this procedure, it tries to call one called sp_MSins_RMAReplacedIte_msrepl_cssm - it takes the last letter of the table name and adds it to the end of the procedure name.
The worst part is that this causes the application of the snapshot to fail, but it doesnt report what the error is, and instead it just tries applying the snapshot again. The only way i have managed to find which call is failing is to run profiler against the subscriber while the snapshot is being applied and see what errors.
I have run sp_broswereplcmds and the data in there is what is applied to the subscriber - ie the wrong procedure name.
All the servers involved are running sql 2005 service pack 2. The publisher and subscriber were both upgraded from sql 2000, but the distribution server is a fresh install of sql 2005.
View 1 Replies
View Related
Nov 14, 2000
I get the following error:
Another snapshot is running for the publication.
I just upgraded to Service pack2 and can not get the replication working. I have not clue what is wrong.
Thanks in Advance,
Phillip M. Tricoli
View 1 Replies
View Related
Jun 27, 2006
Hello, I have setup web sync from wm 5.0 and it seems to crash when applying the snapshot. Looking at the column definitions it seems fine. Am I missing something? Thanks in advance.
John
The identity column must be either an integer or big integer data type and cannot be NULL.
HRESULT 0x80004005 (25551)
The SQL statement failed to execute. [ SQL statement = CREATE TABLE "macros" ( "peopleid" numeric ( 18 , 0 ) NOT NULL , "macroid" numeric ( 18 , 0 ) IDENTITY ( 1 , 1 ) NOT NULL , "description" nvarchar ( 255 ) NULL , "rowguid" uniqueidentifier ROWGUIDCOL NOT NULL CONSTRAINT "MSmerge_df_rowguid_8E4B26C6706844BC984B039BA07845B5" DEFAULT ( NEWID ( ) ) ) ]
HRESULT 0x80004005 (28560)
The operation could not be completed.
View 3 Replies
View Related
Oct 14, 2007
hi, there;
I got a snapshot agent error:
[SQL-DMO]WriteFile error on '\Mysnapshotunc20071013231104Tracer_4.cft'.
(Source: Tracer (Data source); Error number: 0)
where "Tracer" is one of my tables, but it is never used.
This replication has been used for about three years without anyproblem. But suddenly I got this error.
Does anybody know what cause this and how I can fix it?
Cheers,
View 3 Replies
View Related
Feb 2, 2007
Hi guys, does anyone get this snapshot on mirroring. My mirror server had been down for 1 month+ and just up again. Then my principal server will automatic synchronizing with it. Once i create snapshot on the mirror server for checking whether it get the latest record, there's an error msg which shows 'The database must be online to have a database snapshot.' Then I leave it for 1 hour+ for synchronizing and then still the same. Can I get any solution of it? Thx for the assistance.
Best Regards,
Hans
View 1 Replies
View Related
Oct 16, 2007
Hi all!
I´ve having some issues with a package that I´m currently building.
The package is pretty much finished and doing what it´s supposed to,
just doing some testing to ensure everything is in order.
The package is pretty basic:
Read a fixed with text file, do a lookup on destination database table,
conditional split to determine what to insert and what to update, and that´s it!
At the source of my data flow I have the error output set to redirect all rows,
counting those rows, and finally writing them to a dynamically created file.
However, I just now realized that this file seems to be created ALWAYS,
regardless of rows actually being redirected or not. Everytime I run the package
with no rows being passed through the error output, I still end up with a
dynamically named, zero sized text file.
So my question: Is it possible to supress the creation of this file,
or do I have to add a file system component to my control flow,
deleting this file if my number of errorrows = 0 ?
Hope you can help!
Regards
Daniel
View 1 Replies
View Related
Apr 25, 2007
I have a problem when i Want to run the Snapshot Agent in SQL Server 2005. I have done all the tutorial called Replication Data with Mobile Clients and i done the previous tutorial called : Preparing the Server for Replication. But in the Lesson One i can't run the Snapshot Agent but the publicationis good. Can you help me ?
This is the error's code :
Date 25/04/2007 10:44:27
Log Job History (NTI-PC-118-AdventureWorks-AdvWorksSalesOrdersMerge-2)
Step ID 2
Server NTI-PC-118
Job Name NTI-PC-118-AdventureWorks-AdvWorksSalesOrdersMerge-2
Step Name Run agent.
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
2007-04-25 09:44:28.29 -Publisher NTI-PC-118
2007-04-25 09:44:28.29 -PublisherDB AdventureWorks
2007-04-25 09:44:28.29 -Publication AdvWorksSalesOrdersMerge
2007-04-25 09:44:28.29 -ReplicationType 2
2007-04-25 09:44:28.29 -Distributor NTI-PC-118
2007-04-25 09:44:28.29 -DistributorSecurityMode 1
2007-04-25 09:44:28.29 -XJOBID 0x893D7BB9E72044489F0A1C1878663E1D
2007-04-25 09:44:28.29 --------------------------------------
2007-04-25 09:44:28.29 Connecting to Distributor 'NTI-PC-118'
2007-04-25 09:44:28.43 The replication agent had encountered an exception.
2007-04-25 09:44:28.43 Source: Replication
2007-04-25 09:44:28.43 Exception Type: Microsoft.SqlServer.Replication.ReplicationAgentSqlException
2007-04-25 09:44:28.43 Exception Message: The remote server "NTI-PC-118" does not exist, or has not been designated as a valid Publisher, or you may not have permission to see available Publishers.
2007-04-25 09:44:28.43 Message Code: 14080
2007-04-25 09:44:28.43
Thanks you
View 4 Replies
View Related
May 22, 2006
Hi
Using HTTPS web synchronisation - merge replication.
I have a very strange error where it bombs out half-way through downloading the snapshot
Downloaded a total of 3 chunks.
Downloaded snapshot file 'snapshot.pre'.
Downloaded snapshot file 'myView_6.sch'.
Downloaded snapshot file 'table2_2.sch'.
Downloaded snapshot file 'table2_2.cft'.
Downloaded snapshot file 'table3_3.sch'.
Downloaded snapshot file 'table3_3.cft'.
Downloaded snapshot file 'mytestProc1_4.sch'.
Downloaded snapshot file 'mytestProc3_5.sch'.
Downloaded snapshot file 'MSmerge_tombstone.bcp'.
Downloaded snapshot file 'MSmerge_contents90_forall.bcp'.
Downloaded snapshot file 'MSmerge_genhistory90.bcp'.
Downloaded snapshot file 'sysmergesubsetfilters90.bcp'.
Downloaded snapshot file 'table2_2.bcp'.
A failure occurred when accessing 'MSmerge_contents_table290_forall.bcp' due to an operating system error [3='The system cannot find the path specified.'] during Web synchronization. Ensure that the -InternetLogin user when using basic authentication and the user running the merge when using Windows integrated authentication has been granted access to the snapshot share.
A failure occurred when accessing 'MSmerge_contents_table290_forall.bcp' due to an operating system error [3='The system cannot find the path specified.'] during Web synchronization. Ensure that the -InternetLogin user when using basic authentication and the user running the merge when using Windows integrated authentication has been granted access to the snapshot share.
The processing of the response message failed.
I've tried compressing the snapshot, and can see the bcp file in the snapshot.
HELP !!!
Bruce...
View 11 Replies
View Related
Feb 17, 2006
I am setting up a large number of Push subscribers to a single publication. because of the large number of subscribers, I am not doing the merge with agent jobs, but with SQL RMO. All works well, but from time to time I am getting a funny error when I add a event handler to the snapshotagent, to return the messages, if some feedback to the screen on how the process is getting along.
The error also happen when the process is al most done. Basically when I am not compiling in this line, then NO error.
//Add the Event Handler to receive the Status changes
DynamicSnapshotAgent.Status += AgentEvent;
But once I started getting the error, then it would not go away, sometimes if the publication & subscribers is recreated it goes away but not always, first do not use the event anymore, and at some stage I can put is back after a few succesful dynamic snapshot, then I can enable the event and it will work again........
Any help welkom
Regards
Gertus
Error:
The replication agent had encountered an exception.
Source: Unknown
Exception Type: System.InvalidOperationException
Exception Message: Operation is not valid due to the current state of the object.
Message Code: Not Applicable
View 7 Replies
View Related
Aug 29, 2007
Hi,
I'm merge replicating between SQL Server 2005 and SQL Server Compact on mobile devices. I recently had a problem with reinitialization of subscriber databases (please see my previous post, no responses yet...) which I couldn't resolve and had to get 15 subscribers to backup their dbs so I could manually restore each one onto the server. Most of the subscribers were able (yesterday) to then delete their local dbs, create new db files and sync with a snapshot. Today I'm trying to sync a new db with a newly created snapshot and getting the following errors:
2007/08/29 16:23:17 Thread=1118 RSCB=67 Command=SCHK Hr=8004563C An error occurred while reading the .bcp data file for the 'MSmerge_rowtrack' article. If the .bcp file is corrupt, you must regenerate the snapshot before initializing the Subscriber. -2147199428
2007/08/29 16:23:17 Thread=1118 RSCB=67 Command=SCHK Hr=80045017 The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write. -2147201001
The only difference from yesterday is that there was a server restart this morning. I have regenerated the snapshot but it still doesn't work. This is only affecting users with new (empty) databases, users who regenerated their dbs yesterday can sync ok.
I have read other posts about folder/file permissions affecting snapshot delivery, but there have been no changes to permissions since successful snapshot deliveries yesterday.
I would really appreciate any help with this. At the moment I have 3 users who can't use the system at all.
Regards,
Greg
View 1 Replies
View Related
Jun 12, 2006
i am using sql2005, the data inserted into the database by using createuserwizrd. after that anyone give me this error
anyone ? any thought? thanks please
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. SQLExpress database file auto-creation error:
The connection string specifies a local Sql Server Express instance using a database location within the applications App_Data directory. The provider attempted to automatically create the application services database because the provider determined that the database does not exist. The following configuration requirements are necessary to successfully check for existence of the application services database and automatically create the application services database:
If the applications App_Data directory does not already exist, the web server account must have read and write access to the applications directory. This is necessary because the web server account will automatically create the App_Data directory if it does not already exist.
If the applications App_Data directory already exists, the web server account only requires read and write access to the applications App_Data directory. This is necessary because the web server account will attempt to verify that the Sql Server Express database already exists within the applications App_Data directory. Revoking read access on the App_Data directory from the web server account will prevent the provider from correctly determining if the Sql Server Express database already exists. This will cause an error when the provider attempts to create a duplicate of an already existing database. Write access is required because the web server accounts credentials are used when creating the new database.
Sql Server Express must be installed on the machine.
The process identity for the web server account must have a local user profile. See the readme document for details on how to create a local user profile for both machine and domain accounts.
View 2 Replies
View Related
Oct 12, 2007
hi folks,
i have this error when trying to run the package in development mode.
and i can not decipher this non-intuitive message:
Error: 0xC001604D at <package name>: Checkpoint file "" failed during creation due to error 0x80070003 "The system cannot find the path specified.".
please note that i have no checkpoints on package anymore; i had two but i deleted them but this message still appears.
i have searched the web but no luck in finding an answer.
maybe someone would be able to point out my obvious mistake here.
many thanks,
Nicolas
View 1 Replies
View Related
Aug 29, 2015
When I'm trying to create a database diagram for my tables., First it prompts me saying that - "This database does not have one or more of the supported objects... Do you wish to create them? I know this is normal when you don't have any diagrams. But after clicking "Yes", I get the following error which is attached.
I tried changing the database Owner to "sa". But, still the same error. Interestingly, other databases that are already having the database diagrams (created by others), are allowing me to create new diagrams in those databases. The only difference is, I created this database where I'm trying to create diagrams on. How do I get this working.
Below is Error Message:
View 2 Replies
View Related
Feb 4, 2002
I'm running SQL 7.0 SP3 on two different machines (one with additional hotfixes). I'm taking a nightly snapshot of imported data on Server1 and pushing it out to another SQL 7.0 server on our network, Server2. All but one table is copied successfully. On the final table, I receive the message, "The process could not bulk copy into table '"%"'."
Error Information Category: Data Source, Source: Server2, Number 4813.
Full error message: "Expected the text length in data stream for bulk copy of text, ntext, or image data."
I've looked up 4813, but it's pretty ambiguous/generic. Also, when I SELECT from Server1 and INSERT INTO Server2 in the QA, I receive no errors. Does anyone have any insight?
View 1 Replies
View Related
Jun 24, 2006
Hi,
i am getting the below error while applying running the Synchronization agent for the Subscriber. I have created replication topology with one central server and one subscriber. Here central server has windows server 2003 and subscriber has windows XP. Both are having SQL server 2005. After creating the merge subscriber, i am runnnig the Synchronization agent manually for the first time. While running that i am getting below error. Anybody aware of this error.
2006-06-24 00:26:00.175 Applying the snapshot to the Subscriber
2006-06-24 00:26:02.722 The schema script 'D_NUM_7.sch' could not be propagated to the subscriber.
2006-06-24 00:26:02.784 Category:NULL
Source: Merge Replication Provider
Number: -2147201001
Message: The schema script 'D_NUM_7.sch' could not be propagated to the subscriber.
2006-06-24 00:26:02.816 Category:AGENT
Source: WMBT-07
Number: 0
Message: The process could not read file '\WMBT-01
epldatauncLTR-IN001_TEST_PUB20060624034804D_NUM_7.sch' due to OS error 1265.
2006-06-24 00:26:02.831 Category:OS
Source:
Number: 1265
Message: The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you.
View 8 Replies
View Related
Apr 19, 2007
Hi all,
I have a merge publisher with Snapshot agent for that scheduled to run everyday morning, This was runnning till yesterday. But it is not running today and giving the below error.
Can anyone help me out to solve this error? This is occuring in production environment, i really need a solution as fast as possible.
Error messages:
· Message: Failed to read column data
Stack: at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.ThrowNativeBcpOutException(CConnection* pNativeConnectionWrapper)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint, String strWhereClause)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strBaseBcpObjectName, Boolean fUnicodeConversion, String strDataFile, String strLoadOrderingHint)
at Microsoft.SqlServer.Replication.Snapshot.SqlServer.NativeBcpOutProvider.BcpOut(String strBcpObjectName, String strBcpObjectOwner, String strDataFile)
at Microsoft.SqlServer.Replication.Snapshot.MergeContentsBcpOutWorkItem.DoWork(MergeSnapshotProvider snapshotProvider, IBcpOutProvider bcpOutProvider)
at Microsoft.SqlServer.Replication.Snapshot.MergeContentsBcpOutThreadProvider.DoWork(WorkItem workItem)
at Microsoft.SqlServer.Replication.WorkerThread.NonExceptionBasedAgentThreadProc()
at Microsoft.SqlServer.Replication.WorkerThread.AgentThreadProc()
at Microsoft.SqlServer.Replication.AgentCore.BaseAgentThread.AgentThreadProcWrapper() (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
· Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
· Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
· Message: Shared Memory Provider: No process is on the other end of the pipe.
Stack: (Source: MSSQLServer, Error number: 233)
Get help: http://help/233
Message: Communication link failure
Stack: (Source: MSSQLServer, Error number: 233)
Thanks,
Thams
View 16 Replies
View Related
Feb 3, 2007
I have a very small project written in VB.Net 2005 using the SQL Server 2005 SSiS DTSx package.
I migrated a SLQ 2000 DTS package using the SQL 2005 Legacy tools and saved the package as a local .DTSx package on our file server.
I need to run the package from a clients PC.
I added the reference Microsoft.SqlServer.ManagedDTS so I could then use the Microsoft.SqlServer.Dts.Runtime so I can execute the commands:
Dim oApp As New Application
Dim oPkg As New Package
oPkg = oApp.LoadPackage(g_DTSx_Directory & "AOC copy Generic1 CSV to AOC_verify_file_1.dtsx", Nothing)
Dim oResults As DTSExecResult
oResults = oPkg.Execute
Ok. That works fine and is basically the entire app. It executes without a hitch in debug and as a compiled exe on my PC, but I have all the tools. So now I try and create a setup project for this and I use the setup wizard.
During the creation of the setup project I get a message that states:
The following files may have dependencies that cannot be determined automatically. Please confirm that all dependencies have been added to the project.
C:windowssystem32msxml6.dll
OK. The dll is part of the reference I mentioned above and I have no idea what other dependencies it may have.
How do I find this out?
Has anyone else created a project like this and experenced the same?
I am on a clean build running WinXP Pro with SP2 - VS2005 with SP1 and the SQL Server 2005 tools.
View 4 Replies
View Related
Jul 8, 2005
We've got a problem with our replication. If I try to run the snapshot agent I get the message "Query for data failed".
The detail view of this message shows the following:
View 4 Replies
View Related
Sep 26, 2007
Hi ,
I urgently need a solution for this. I have configured merge replication between a webhoster and a local machine
and it is working perfectly but when I am adding an article (table) which has a CLR assembly associated with it,
the merge replication is failing saying it cannot apply the schema of the CLR assembly at the client. I think Microsoft
supposedly says in it's documentation that merge replication supports CLR assemblies. I have recreated the snapshot
after selecting the table (article) and I have reinitialised the subscription also but it is just not working. It is the simplest
of replication with just one publisher and one subscriber.
Thanks,
Andy
View 2 Replies
View Related
Jun 25, 2007
I am using snapshot replication to copy data from one database to another. I truncate the destination table first. The publisher and the subscriber are different databases on the same server. The data turns into 1 unrecognizable row.
Here is what the source table looks like:
displayTypeID, displayType
1, Title List Formats
2, Title Details
3, Title List Export
4, Pricing Notes
5, clone Mask 001
6, clone Mask 002
7, clone Mask 004
8, clone Mask 008
9, hide From Admin
10, not Common Attr
11, Insert Title
12, title Types
The resulting data looks like this:
DisplayType, displayTypeId
, 1660953600
I see no errors in replication and nothing in the source table looks like bad data that could cause such a malady. I see the problem on two different servers now and identified the source of the problem, the column order is reversed in the source and destination tables. The data types do not even match so I would at the very least expect an error from bcp.
View 2 Replies
View Related
Jun 5, 2006
Hi,
I'm just getting started with SSIS and want to create a custom data flow component. I found the Ivolva Digital "Component Wizards for Integration Services" which says it make starting your own custom task or data flow component
a snap by providing a functional base project for your task or component.
Therefore I installed the Component Wizards for Integration Services and everything seemed to install ok - when I started Visual Studio I had the "Custom Data Flow Component" and "Custom Task" templates available in the New Projects dialog.
However, when I try to create a project of either of these types I get the message "Creating project 'CustomTask1'...project creation error" in the status bar, and can't get past the New Project dialog. (I can create all other project types ok, though).
Can anyone offer any advice that might help me out here?
Thanks in advance,
Lawrie.
View 1 Replies
View Related
Feb 5, 2007
I'm creating a publication with a complex filter joining many tables, for replication between SQL Server 2005 and SQL Mobile 2005. Is there a limit on the number of articles, or depth of joins, in the filter? I have a working replication, but when I add another article joined to tables already in there, the snapshot agent status window gives me this error:
String or binary data would be truncated.
Cannot find the object 'MSmerge_ctsv_2C675AF5938E4EA1B7D0DCFF9ECAD9EB', because it does not exist or you do not have permission.
sp_MS_marksystemobject: Invalid object name '[dbo].[MSmerge_upd_2C675AF5938E4EA1B7
The MSmerge_ctsv... system view being referred to DOES in fact exist. But I wonder if there's an internal varchar variable used to hold the join criteria which is too short for what I'm trying to do.
Any help is always appreciated!
Dan
View 4 Replies
View Related
Mar 1, 2006
I'm converting an existing production replication process to SQL 2005 for testing. My snapshot for a merge replication is failing.
Environment: Single XP server, no filters, @schema_option = 0x000000000C034DD1
I have several snapshot jobs in my process, 2 for transactional replication and 2 for merge replications. In both types, I'm replicating from A to B and then from B to C. In the failing job, I'm merge replicating from B to C. In this failing snapshot job, the error messages are:
2006-03-01 18:42:17.22 [58%] Bulk copying snapshot data for article 'MyName1'
2006-03-01 18:42:17.34 [58%] Bulk copied snapshot data for article 'MyName2' (0 rows).
2006-03-01 18:42:17.41 [58%] Bulk copied snapshot data for article 'MyName1'(195 rows).
2006-03-01 18:42:29.84 [61%] Discovering dependencies among article objects in the specified publication
2006-03-01 18:42:33.66 [61%] The replication agent had encountered an exception.
2006-03-01 18:42:33.66 Source: Unknown
2006-03-01 18:42:33.66 Exception Type: Microsoft.SqlServer.Management.Smo.FailedOperationException
2006-03-01 18:42:33.66 Exception Message: Discover dependencies failed.
2006-03-01 18:42:33.66 Message Code: Not Applicable
2006-03-01 18:42:33.66
Does anyone have an idea what I could look for to try and fix this?
The A to B snapshot obviously uses the same tables. My snapshot for merge job (which worked) messages for the A to B snapshot are:
Message
2006-03-01 18:40:24.98 Time spent analyzing foreign key references (seconds): 0.00
2006-03-01 18:40:24.98 Time spent analyzing check and default constraint references (seconds): 0.19
2006-03-01 18:40:24.98 Time spent analyzing non-article object dependencies (seconds): 0.42
2006-03-01 18:40:24.98 Time spent preparing snapshot generation (seconds): 35.49
2006-03-01 18:40:24.98 Time spent generating merge replication procedures (seconds): 41.39
2006-03-01 18:40:24.98 Time spent generating merge replication stored procedure scripts for subscribers (seconds): 20.66
2006-03-01 18:40:24.98 Time spent bulk copying data (seconds): 1.25
2006-03-01 18:40:24.98 Time spent copying/compressing generated file (seconds): 0.00
2006-03-01 18:40:25.00 Time spent adding rowguid columns/creating merge triggers (seconds): 1.38
2006-03-01 18:40:25.00 Time spent posting snapshot commands (seconds): 25.97
2006-03-01 18:40:25.00 *******************************************************************************
I kicked off the job again and got a different error message:
Message
2006-03-01 19:17:30.32 ---------------------------------------------
2006-03-01 19:17:30.32 -BcpBatchSize 100000
2006-03-01 19:17:30.32 -HistoryVerboseLevel 2
2006-03-01 19:17:30.32 -LoginTimeout 15
2006-03-01 19:17:30.32 -QueryTimeout 1800
2006-03-01 19:17:30.32 ---------------------------------------------
2006-03-01 19:17:30.32 Connecting to Publisher 'xxx-xxxxxxxx'
2006-03-01 19:17:30.34 Publisher database compatibility level is set to 90.
2006-03-01 19:17:30.36 Retrieving publication and article information from the publisher database 'xxx-xxxxxxxx.xxxxxxxxx'
2006-03-01 19:17:30.54 [0%] The replication agent had encountered an exception.
2006-03-01 19:17:30.54 Source: Replication
2006-03-01 19:17:30.54 Exception Type: Microsoft.SqlServer.Replication.ReplicationAgentSqlException
2006-03-01 19:17:30.54 Exception Message: Data is Null. This method or property cannot be called on Null values.
2006-03-01 19:17:30.54 Message Code: 52006
2006-03-01 19:17:30.54
Does that help provide a clue?
View 7 Replies
View Related
Jun 27, 2006
Hi all.
I get the following error when trying to run a pull subscription from the subscriber:
The schema script '' could not be propagated to the subscriber.
(Source: Merge Replication Provider (Agent); Error number: -2147201001)
---------------------------------------------------------------------------------------------------------------
The process could not connect to FTP site 'ftp://ESOFTSERVER.NO-IP.INFO' using port 21.
(Source: ESOFT (Agent); Error number: 0)
---------------------------------------------------------------------------------------------------------------
The connection with the server was reset
(Source: (OS); Error number: 12031)
---------------------------------------------------------------------------------------------------------------
I've tried everything I could to solve this problem, but I can't get it working.
Thanks for any advise.
Fabio Reynoso
View 5 Replies
View Related
