hi,,,here is the issueon the site there is a multiline text box.people type in muliple lines including soft line breaks(soft return (shift+enter)) and hard line breaks (hard return(enter)). the data gets stored in the SQL server 2000 database. In enterprise manager I can see the returns (the line breaks), but when the same data gets posted back to the page it loose those soft and hard returns,whats going onhelp
View 1 RepliesI am using Master Data Service for couple of months now. I can load, update, merge and soft delete data in MDS. Occasionally we even have to hard delete data from MDS. If we keep on soft deleting records in a MDS table eventually there will be huge number of soft deleted records. Is there an easy way to hard delete all the soft deleted records from all MDS tables in a specific Model.
View 18 Replies View RelatedI'm running SQL Server 2008 Feb08 CTP and I've got a tablix with column groupings and row groupings which works nicely, I'm a becomming a big fan of the tablix.
However sometimes the filter I have on a column group returns no records and the whole column group disappears.
Is there any way to make this column appear with but with empty cells as I have another tablix down the page with the same columns and I want the columns to all line up on the multiple tablix.
In Version 2005 I used to achieve the equivalent of a column group within a table by adding a list with filter to the cell, this meant the column always was shown, the tablix allows does this much more elegantly but I'll have to go back to the old method if I can't make the column remain.
Am I just missing a simple option?
Nathan
Hello,
I'm working on a SQL Server 2005 database (under Win 2003) which is used for a web application (24/24) and on the other hand for asynchronous works (20h -> 06h).
Sometime the asynchronous works consume all system resources and have for consequence to slow the web application even unavailable.
So I want to install a soft-NUMA configuration in order to limit the CPU access for the asynchronous works.
The test platform is based on two hardware NUMA nodes, each having 2 hyperthreading CPU (4 CPUs per node for Windows). The repartition of the CPU on the two hardware NUMA node is :
- Node 0 : CPU 0, 1, 4 et 5
- Node 1 : CPU 2, 3, 6 et 7
Actually, I'm testing the following configutration on the test platform that is discribed higher :
Configuration soft-NUMA (in the registry)
CPU 7 6 5 4 3 2 1 0
node 0 0 0 1 1 0 0 1 1
node 1 0 0 0 0 1 1 0 0
node 2 1 1 0 0 0 0 0 0
I respected the fact that this is not possible to create soft NUMA nodes with CPU which are on differents hardware NUMA nodes.
In parallel, any CPU affnity is defined because I am on a single database instance.
Then, on SQL Server, I defined an endpoint on the TCP port 2000 by taking care well to give connction right on this endpoint.
At the end, I added in the SQL Server Configuration Manager the TCP port 2000 with a soft-NUMA mapping in order to create grouping. I obtained the following configuration : 1433,2000[5].
With this configuration, normally, when I'm connected to the database by the TCP port 1433, I have all the CPU. In the other hand, when I'm connected by the TCP port 2000, I have just the CPUs of the NUMA nodes 0 and 2 (CPU 0,1,4,5,6 and 7)
However, and this is my problem, when I'm connected by the TCP port 2000 and that I execute a query which I know it consumes all CPU resources, all CPU are used !
In order to verify, I changed the mapping in the TPC port like this : 1433[2],2000[5].
Normaly, with a connection by the TCP port 1433, I have just the CPU of the NUMA node 1. However, all CPU are used by my query.
When I'm looking at the configuration which is in the error log, I don't see anything strange :
Multinode configuration: node 0: CPU mask: 0x0000000c Active CPU mask: 0x0000000c. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.Multinode configuration: node 1: CPU mask: 0x00000033 Active CPU mask: 0x00000033. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.Multinode configuration: node 2: CPU mask: 0x000000c0 Active CPU mask: 0x000000c0. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.Server is listening on [ x.x.x.208 <ipv4> 2000].Server is listening on [ x.x.x.245 <ipv4> 2000].Server is listening on [ x.x.x.132 <ipv4> 2000].SQL Network Interfaces initialized listeners on node 2 of a multi-node (NUMA) server configuration with node affinity mask 0x00000005. This is an informational message only. No user action is required.Server is listening on [ x.x.x.208 <ipv4> 1433].Server is listening on [ x.x.x.245 <ipv4> 1433].Server is listening on [ x.x.x.132 <ipv4> 1433].SQL Network Interfaces initialized listeners on node 1 of a multi-node (NUMA) server configuration with node affinity mask 0x00000002. This is an informational message only. No user action is required.
Is someone know why, in spite of the NUMA configuration, all CPU are used ?
Is there a configuration error ?
Is it necessary to define an affinity CPU in parallel of NUMA configuration ? But how to make, because I work on only one database ?
Thanks in advance for your reply.
Hello,
A bit of a double question. We are setting up a new environment but this time we don't want to use the build-in replication. As we have a very changing environment these replications block us in modifying tables. (Was on W2K/Sql2000).
To avoid this we would write a softreplication, now we are running on W2003AS/Sql2005Ent, but when trying to run a transaction to an older server this error pops up. "The transaction manager has disabled its support for remote/network transactions".
I've found some articles on how to solve this but they all mention a buttin 'security config' on the MSDTC tab page of MyComp in CompServ. But i can't see that Button on a W2k.
Any suggestions ..
Or, 2nd question, is it still so that when a replication has been setup in 2005 that bthe table is unmodifiable ??
Hi seniors
there are two tables involve in replication let say table1 and replicated table is also rep.table1.
we are not deleting records physically in table1 so only a bit in table1 has true when u want to delete a record but the strange thing is that replication agaent report that this is hard delete operation on table1 so download and report hard delete operation and delete the record in replicated table which is very crucial.
plz let me know where am i wrong and how i put it into right way.
there is no triggers on published tables and noother trigger is created on published table.
regards
Ahmad Drshen
Grrr!I'm trying to run a script:print 'Declaring cursor'declare cInv cursor forward_only static forselectdistinctinv.company,inv.contact,inv.address1,inv.city,inv.state,inv.postalcode,inv.cmcompanyidfromdedupe.dbo.ln_invoice as invleft joindedupe.dbo.customerid as cidondbo.fnCleanString(inv.company) = cid.searchcowhere((inv.customerid is nulland cid.searchco is null)and (inv.date >= '01/01/2003' or (inv.date < '01/01/2003' andinv.outstanding > 0.01))and not inv.company is null)print 'Cursor declared'declare@contact varchar(75),@company varchar(50),@address1 varchar(75),@city varchar(30),@state varchar(20),@zip varchar(10),@cmcompanyid varchar(32),@iCount int,@FetchString varchar(512)open cInvprint 'cursor opened'fetch cInv into@company,@contact,@address1,@city,@state,@zip,@cmc ompanyidprint 'Cursor fetched @@Cursor_rows = ' + cast(@@cursor_rows asvarchar(5))All the prints are there to help me figure out what's going on!When I get to the Print 'Cursor fetched @@cursor_rows....the value is 0 and the script skips down to the close and deallocate.BUT, if I just highlight the Select...When section, I get over 2,000rows. What am I missing?Thanks.
View 6 Replies View Related
Hi all,
I have two problems.
1. I downloaded ChartFXRSTrial and created one chart, and able to deploy it in ReportServer, but the problem is the reports are not showing there, i checked the configuration of .dll files in the help provided by chartFX, but couldn't get anything, so could help me on this.
2. How to give Tooltip for the X- axis or Y- axis values in the ReportServer , i tried using chartproperties of .rdl file, but didnt understand it. can help me on this, and one more i tried with Dundas too, If im giving tooltip as #valy then, it is showing samething in reportserver instead the values of 'Y-axis'.
Thanks,
Mahesh Manthena
Hi,
I need to use a top and a join in the same sql. To get 10 top refnr from orders_refnr. That works fine to I use this:
SQL = "SELECT TOP 10 refnr, antal = COUNT(refnr) FROM orders_refnr INNER JOIN produkter ON (orders_refnr.refnr = produkter.referensnummer) GROUP BY refnr ORDER BY antal DESC"
But I need to be able to get information from more fields than the field refnr. How can I specify more fields? I need to get other fields from produkter.
Please helt I´m really stucked.
I have gotten some criticism from coworkers regarding this test and just wanted to see what you guys think. I realize the wording could use improvement and any criticism towards making it easier to understand is much appreciated.FWIW - I had to solve this problem on the job so I feel it is a real-world test that helps me understand how people think and if they try to find alternate solutions.Thanks!~~~~~~~~~~~~~~~~~~~~Given a table that has over 100,000 records…SUBSIDIARY=========PARENT_IDINTCHILD_IDINTULTIMATE_PARENT_IDINTCLEANUP_INDBIT…where each PARENT_ID can have multiple CHILD_ID values, but the PARENT_ID should not equal the CHILD_ID. After an initial data load, the ULTIMATE_PARENT_ID and CLEANUP_IND columns contain NULL values (see page 2 for sample data).ULTIMATE_PARENT_ID is defined as the topmost parent in the chain for the particular CHILD_ID record, so if the chain was only 2-level’s deep the ULTIMATE_PARENT_ID is the CHILD_ID’s PARENT_ID’s PARENT_ID.Please write an answer for all three questions below:A)Which of the following queries should you run first?B)Write an optimized query to identify the ULTIMATE_PARENT_ID for each CHILD_ID and set its value into the ULTIMATE_PARENT_ID column.C)Write a query to identify ALL of the circular references and mark each record that is a circular reference by updating the CLEANUP_IND column to 1.~~~~~~~~~ Page 2 ~~~~~~~~~ Sample Data, remember though this table has over 100,000 records and the parent-child chain can go n-levels deep – where n is not known.PARENT_IDCHILD_IDULTIMATE_PARENT_IDCLEANUP_IND1024512NULLNULL362300NULLNULL887541NULLNULL10221024NULLNULL546887NULLNULL5122305NULLNULL112967NULLNULL697123NULLNULL901452NULLNULL2300666NULLNULL334445NULLNULL512903NULLNULL884554NULLNULL313313NULLNULL554884NULLNULL112119NULLNULL967555NULLNULL2305333NULLNULL33336NULLNULL541546NULLNULL10301020NULLNULL112999NULLNULL
View 14 Replies View Relatedhello
i have a proplem in query
i have 2 tables in my sql db one named stuednt include fields(id,name)
and one table named stu_cources include fields(id,course_name)
ok
i want to query the student that have courses EX. mcse
the result that i want from 2 tables
ID | NAME | Coures_NAME
in MSHFLEXGRID1
any one help me plz ...
hi, I have NT server which has drive c: 500 MB and drive d has 44 GB.
I know that the person who set up this server did not give enough space to the c drive, here is the problem. I am running sql server 7.0 which has 30 GB of data in the d drive. I need to reconfigure the NT hard drive so I can allocate 2 GB for C drive and 42 GB for D drive.
What is the best, safe method to accomplish this task.
Ahmed
After experiencing a hard drive failure i have reinstaled MSSQL7 on one drive and have a database which I need to recover on separate physical drive. How can I go about doing this?
View 1 Replies View RelatedHi,
I have ran
1. xp_fixeddrives and got the result
drive MB free
----- -----------
C 1708
D 16311
2. I ran Backup Wizard in EM and able to see only above drives
3. But if ran backup in EM able to see more than 10 Drives(like C,D,H,I,J,M,N and etc).
Why I can able to see those difference?.
How do I find out exactly how many drives are there in this server without directly going to that server?.
I appreciated your valuable answere.
Thanks,
Ravi
Hi, I'm looking for a way to check the free space left on the hard drives and then if needed send an alert to notify when we need to free up some space. I played around with the performance monitor and realized I could do it that way but I think you would have to leave the performance monitor running all the time and I'm not sure if I want to do that. I also read about the xp_fixeddrives proc that displays how much free space is available but then I don't know what to do from there? Does anyone have any recommendations for the best way to do this.
View 3 Replies View RelatedRight, I have this database that I need to sort, I'll give you an example:
ID Name Value
2312 Sega 200
5678 Blizzard 215
3412 Bullfrog 210
6798 Nintendo 195
Now, what I need to do is to sort it, perform calculations on and I need the list to be sorted with a predefined post as the top result, say like this one time:
ID Name Value
3412 Bullfrog 200
2312 Sega 210
5678 Alizzard 215
6798 Nintendo 195
as you can see sorting it alphabetically would lead to
5678 Alizzard 215
3412 Bullfrog 210
6798 Nintendo 195
2312 Sega 200
(or the other way around if you play with asc/desc)
by id would be
2312 Sega 200
3412 Bullfrog 210
5678 Alizzard 215
6798 Nintendo 195
There aren't any top or bottom values sort of speak for the posts I want to be on top, so...how to sort this like this?
3412 Bullfrog 200
2312 Sega 210
5678 Alizzard 215
6798 Nintendo 195
the order after the top one is irrelevant.
Now...I know I could sort this by doing something like
"Select * FROM blablabla WHERE Name = 'Bullfrog'"
and then doing "Select * FROM blablabla" and then just bypassing that post in asp/php code or whatever, but that would be a pain for me to do as I have to perform some massive calculations and the code would be alot larger then needed be
Its a brain teaser allright...can you help me out?
Hello, everyone:
Does any one have an idea for hard drive configuration on SQL Server 2K? How to determine the RAID level for datafile and log file? Thanks
ZYT
I was wondering if anyone played around with changing the allocation unit size when formatting the hard drive the SQL server is running on. I would think that setting it higher to account for the larger size of the database files would help, but I'm not sure.
Anyone have any thoughts?
Hello!
I have 2 harddisk in my computer and I have SQL 2005 Express on 1 of them (let's say C:), however, my C: is going to be full soon! Once it is full, is it possible to create a table on my other harddisk which the server can recognise?
Thanks!
OB
Hi there,
I am using this stored procedure in sql.
I have 6 tables. One is called employees. This is what I need to be able to do. A user enters a new employee into a winform, picks a role, division, manager, technicalskill set and applications from the drop down lists and hits save. The employee table should be the only one updated and has these columns only.( firstname, lastname, dvisionid, managerid, roleid,techskillsid, and appID). At the moment what is happening is its saving the firstname, lastname correctly, but the rest of the ID columns are null. It is updating the other tables with the string entered but what I need is the emplyee table to update with the corresponding ids. Is this alot more complicated then i thought? If I try to replace the role with roleid etc, it will just tell me I can't convert string to int which is understandable. How do I do this?
CREATE PROCEDURE sp_InsertEmployee
@Firstname nvarchar(50),
@Lastname nvarchar(50),
@Role nvarchar(50),
@Manager nvarchar(50),
@Division nvarchar(50)
AS
BEGIN
SET NOCOUNT ON;
INSERT INTO EMPLOYEES (FIRSTNAME, LASTNAME) VALUES (@FIRSTNAME, @LASTNAME)
INSERT INTO [ROLE] ([ROLE]) VALUES (@ROLE)
INSERT INTO MANAGER (MANAGER) VALUES (@MANAGER)
INSERT INTO DIVISION(DIVISION) VALUES (@DIVISION)
END
GO
My C# code is like this:
SqlCommand sqlC = new SqlCommand("sp_InsertEmployee", myConnection);
sqlC.CommandType = CommandType.StoredProcedure;
sqlC.Parameters.Add(new SqlParameter("@Firstname", SqlDbType.VarChar, 50, "Firstname"));
sqlC.Parameters.Add(new SqlParameter("@Lastname", SqlDbType.VarChar, 50, "Lastname"));
sqlC.Parameters.Add(new SqlParameter("@RoleID", SqlDbType.Int, 50, "RoleID"));
sqlC.Parameters.Add(new SqlParameter("@ManagerID", SqlDbType.Int, 50, "ManagerID"));
sqlC.Parameters.Add(new SqlParameter("@DivisionID", SqlDbType.Int, 50, "DivisionID"));
//sqlC.Parameters[0].Value = 4;
sqlC.Parameters[0].Value = FirstnameText.Text;
sqlC.Parameters[1].Value = Lastnametext.Text;
sqlC.Parameters[2].Value = RolecomboBoxTest.Text;
sqlC.Parameters[3].Value = ManagercomboBox1.Text;
sqlC.Parameters[4].Value = DivisioncomboBox2.Text;
int i = sqlC.ExecuteNonQuery();
//sqlC.ExecuteNonQuery();
Sorry for pasting so much.
Hello, I am experimenting with indexes and hope people can shed lighton some of my problems.I am using SLQ 2000 on Win 2000 Server. Using the following query fordiscussion;--------------------------------SELECT TOP 1000000E.EUN_Numeric, -- Primary KeyE.EUN_CODE, -- VarCharE.[timestamp] --,--E.Model -- Computed column (substring of EUN_CODE)FROM dbo.Z1_EUNCHK E--WHERE E.[timestamp]DATEADD ( wk , -48, getdate() ) AND-- E.[timestamp]< DATEADD ( wk , -4, getdate() )ORDER BY E.[timestamp] DESC-----------------------------------Problem 1) If I set up a single Index on the TimeStamp (plus the PK onEUN_Numeric) then there is not improvement in performance.It is only when I set up an Index on the Timestamp,EUN_Numeric,EUN_Codethen I get a good improvement. This is also thecase with the "where" clause added. I am using query analyser. Theimprovement is 14 secs to 3 secs (mainly with the removal of the sortprocess)Why?My expectation is that if my query uses [timestamp] column then surelyan index only on this is adequate.Problem 2) Introducing the simple computed column into the query takesthe time to 15 secs (with Sort processes involved).Why does revert back to sorting process when previous the index wasused ?Regards JC......
View 6 Replies View RelatedI have a 75 GB hard drive and a 300 GB. I want to mirror the 75 to the 300 and use the extra space as data storage. Is this possible if I partition the 300 and then mirror the hard drives.
Thanks
How can I do this with vbscript, or C# ?
- Copy backup files down from a network share, into the data directory of my local sql 2005 instance
- perform a restore using the files copied from above
- Execute a dts package
More info:
Our databases are scripted and exist on the typical development, and testing enviroments. So as I get ready to start a new application, I want my local sql instance to be updated based on structure changes as well as data. So I have to apply the changes from the scripted sources and pull over the data. I would naturally like to automate this.
ideas / suggestions welcome
I have a new server.
It was shipped with a 76 gig drive setup in RAID 1 (2 disk) and a 400 gig drive setup in RAID 5 (4 disk).
I would like to determine what is the best way to setup up the partitions. What size and what should be placed on each.
Like the C: Drive...Should I just put Windows on there and nothing else? Do I stand to gain something from not using part of that 76 gigs as a D: drive for my apps?
Is it possible to force parameters into the reports so enabling me to force a user id value into every report that is picked up from the list. The user ID is a system value and I don't want end users having any knowledge of it?
Cheers
Darren
Me.SqlConnection1.ConnectionString = "workstation id=""XXXXXXXX"";packet size=4096;user id=XX;data source=""XXXXXXX"";persi" & _
"st security info=True;initial catalog=manufacturing;password=XXXXX"
What excatly is this statement doing it looks to be creating a trusted connection to a certain workstation?
Hi!I'm desperating here!!! Two questions:1º Is line 13 realy selecting all the records with the username samurai (in this case)?!2º How do I fill the Boolean SeExiste var with a value from the record?1 Dim UserIDParameters As New Parameter
2
3 UserIDParameters.Name = "ProdUserID"
4
5 UserIDParameters.DefaultValue = "samurai"
6
7 Dim LoginSource As New SqlDataSource()
8
9 LoginSource.ConnectionString = ConfigurationManager.ConnectionStrings("ASPNETDBConnectionString1").ToString()
10
11 LoginSource.SelectCommandType = SqlDataSourceCommandType.Text
12
13 LoginSource.SelectCommand = "SELECT FROM aspnet_Users (FirstTime) VALUES (@UserIDParameters) "
14
15 Dim SeExiste As Boolean
16
17 SeExiste = LoginSource.SelectParameters("FirstTime").DefaultValue
I'm a newbye and despite this simple thing that in normal ASP is very easy to do!!! Please help me!Thanks in advance!
Hi there,
The postage and packing scheme being used at the site I'm working on depends on the customer's location.
If they're in the UK they get once scheme and if they're in Ireland they get another. Furthermore, if they're anywhere else they get another scheme.
A customer's country is indicated by a 'countryID' stored in the main customer row in the database. (This ID references a country in the Countries table.)
Thus, I was wondering if it is acceptable to hard code the country pk of the UK and Ireland into the formular which works out the postage and packing?
At present, for a similar issue, I've even hard coded the the pk of UK and Ireland into some Javascript running at the client.
Is it fair design to work with a hard coded pk like this?
Cheers,
I'm on day 3 of troubleshooting.... still no luck!Very simple application. Extract data from the database and populate the GridView.Following error message:Server Error in '/WebSite3' Application.
An
attempt to attach an auto-named database for file
C:Webspaceigiriabcabc.comwwwWebSite3App_DataDatabase.mdf
failed. A database with the same name exists, or specified file cannot
be opened, or it is located on UNC share.-------------------------------------------------Look familar? so i Googled it and tried everything, from removing the User Instance = true in the web.config and even adding intial Catalog = Database and it didnt work.Instead i was greeted with a Newer Error msg:Server Error in '/WebSite3' Application.
Could not open new database 'Database'. CREATE DATABASE is aborted.Could
not attach file
'C:Webspaceigiriabcabc.comwwwWebSite3App_DataDatabase.mdf'
as database 'Database'.File activation failure. The physical file
name "D:-- Work Documents --WorkezabcWebSite3App_DataDatabase_log.LDF" may be incorrect.The log cannot be rebuilt when the primary file is read-only.Next i have no idea why it's pointing back to my location directory hence that could be the issue but i'll leave it to you experts for your valueable input.It's uploaded onto a web server running ASP 2.0 and MS SQL Server 2005 i thinkFeel free to ask if you need additional informationThanks for reading!
I thought a stored procedure was taking much too long to complete. So, I moved the main query to Query Analyzer and found that when I substituted actual values for variables that my SELECT statement ran in seconds. Just to test, I created DECLARE statements, set the variables equal to the same values, re-ran the SELECT statement and it took over a minute. Even the Execution Plan was much different. Any suggestions?
View 4 Replies View RelatedHello I was hoping somebody out there could help me …..
We have a hard-coded application which uses the Sa account with no password. We want to add password to Sa – but when we do get users/DBAs calling us saying the application does not work.
How can we add password to Sa and get the application to work - unfortunately we do not have scripts for the application or know of the whereabouts of the developers.
Any suggestions/ideas – will be greatly appreciated
Cheers
Khalid
Could some of the technical gurus we have please help me to solve this problem.!!!
We lost power, and when the generator came on our system crashed and the data and the hardware was gone. We initialized the disk and we lost our backups. There is no tape backup in the company. Thanks for your help.
Hi guys,
I have a general question. Would SQL server have slower performance if you placed the ldf or mdf files on a dynamic drive setup or should it always be basic? I noticed that a server had 2 dynamic drives and the log files and mdf files are located on these drives. Usually I see all the drives as basic not dynamic. Does this even matter?
thanks