Solving This Error: Semsfc.dll Is Loaded, But The DllRegisterServer Entry Point Was Not Found...
Dec 12, 2007
Hi there
After performing a side-by-side instalation of SQL2005, I am not able to open Enterprise manager (for managing SQL2000 instance). It aborts with some errors related to mmc.exe not being able to use a couple of dlls: semsfc.dll and lmmc.dll.
I've tried to unresgister/register them but I get the following error message:
semsfc.dll is loaded, but the dllRegisterServer entry point was not found...
This file can not be registered .
I found a similar complaint in the VB forum, which recomended to use Reagasm but I couldn't understand it really, and I'm not sure if it applies to this SQL server issue.
Thaks for your help
ds9
View 4 Replies
ADVERTISEMENT
Jul 20, 2005
Hi there;I was trying to apply SQL SP3a on my windows 2000 server (SP4), butthe installation failed and when I rebooted my server the SQL agentfailed to start and I get the following error:SQLAGENT.exe - Entry Point Not Foundthe procedure entry point SFMapi0GetProfiles could not be located inthe dynamic link library SEMMAP.dllNow, I tried replying SQLSP3a, but that keeps on failing and I keepgetting this error message.Any Idea .. Please help me.Thank you.
View 1 Replies
View Related
Jul 20, 2005
Hi All!Has anyone has seen this error before?Event Type:InformationEvent Source:Application PopupEvent Category:NoneEvent ID:26Date:5/14/2004Time:10:06:45 AMUser:N/ADescription:Application popup: sqlmangr.exe - Entry Point Not Found : Theprocedure entry point TraceMessage could not be located in the dynamiclink library ADVAPI32.dll.This computer is running MS SQL Server STD Edition 2000 W/ ServicePack 1.Thanks!
View 1 Replies
View Related
Sep 8, 2004
I have to write a statement that answers the question:
"Which pilot is authorized to fly all the aircraft in the fleet?" implying that the individual aircraft could be of any of the three aircraft types.
Below are the tables with notation Tbl_name (important keys [clarification of keys]):
personnel (pers_id, name, crew_role [eg. pilot, stewardess]),
aircraft (craft_id, type_designation [eg. Boeing737], craft_name [eg. The Viking, Icarus]),
aircraft_type (type_designation), and
authorization (pers_id, type_designation).
In words my question should be something like:
"For all those who are authorized to fly aircraft (the only pers_id:s listed in the authorization table), show the names of those that have their pers_id:s next to all aircraft_type:s."
I've gotten this far:
Code:
SELECT DISTINCT p.name
FROM personnel AS p, authorization AS b, aircraft_type AS f
WHERE p.pers_id = b.pers_id
AND b.type_designation = ... ;
Now what I want to accomplish is to select the pilot which has a record for ALL type_designation entries in the aircraft_type table.
Is there a magic keyword that I don't know of? Is that magic keyword called "EXIST" and how do I use it?
Best regards,
rod
View 2 Replies
View Related
Nov 19, 2015
I am wanting to create a query so that I can combine each of the found duplicates into one entry.
An example of this is:
Name |ID |Tag |Address |carNum
-------------------------------------------------------
Bob Barker |2054| 52377 |235 Some road |9874
Bill Gates |5630| 69471 |014 Washington Rd. |3700
Bob Barker |2054| 97011 |235 Some road |9874
Bob Barker |2054| 40019 |235 Some road |9874
Steve Jobs |8501| 73051 |100 Infinity St. |4901
John Doe |7149| 86740 |7105 Bull Rd. |9282
Bill Gates |5630| 55970 |014 Washington Rd. |3700
Tim Boons |6370| 60701 |852 Mnt. Creek Rd. |7059
In the example above, Bob Barker and Bill gates are both in the database more than once so I would like the output to be the following:
Bob Barker |2054|52377/97011/40019|235 Some road |9874
Bill Gates |5630|69471/55970 |014 Washington Rd.|3700
Steve Jobs |8501|73051 |100 Infinity St. |4901
John Doe |7149|86740 |7105 Bull Rd. |9282
Tim Boons |6370|60701 |852 Mnt. Creek Rd. |7059
Notice how Bob Barker & Bill Gates appends the tag row (the duplicated data) into one row instead of having multiple rows. This is because I do not want to have to check the previous ID and see if it matches the current id and append to the data.
View 2 Replies
View Related
Jul 9, 2004
Hi,
I'm running a merge replication on a sql2k machine to 6 sql2k subscribers.
Since a few day's only one of the merge agents fail's with the following error:
The merge process could not retrieve generation information at the 'Subscriber'.
The index entry for row ID was not found in index ID 3, of table 357576312, in database 'PBB006'.
All DBCC CHECKDB command's return 0 errors :confused:
I'm not sure if the table that's referred to in the message is on the distribution side or the subscribers side? A select * from sysobjects where id=357576312 gives different results on both sides . .
Any ideas as to what is causing this error?
View 3 Replies
View Related
Jun 1, 2015
while working on deployment to production server of an SSIS project, I have noticed that development priject has "disappeared" from my development machine which, obviously, was not my intention, at all. I now get the error prompt saying this:
what am I suppose to do in order to RESTORE it on devel machine like it used to be?
View 7 Replies
View Related
May 1, 2007
I've got a package which reads a text file into a table and updates another. I set up configurations so that I could import it into the SSIS store on both my dev and live servers. Now, I'm getting this error. I tried removing the configs and am still getting it.
I've been through each step and everything looks okay. Does anyone have any idea (a) what's wrong, (b) how to localise the error or (c) get any additional information? Or do I just have to recreate the package from scratch?
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at PartnerLinkFlatFileImporter: The connection "" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Error at PartnerLinkFlatFileImporter [Log provider "SSIS log provider for SQL Server"]: The connection manager "" is not found. A component failed to find the connection manager in the Connections collection.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
View 20 Replies
View Related
Dec 5, 2006
Hi,
I tried to connect to SQLServer from a java application using jTDS driver jars, with Windows authentication. The following error is thrown,
java.sql.SQLException: I/O Error: SSO Failed: Native SSPI library not loaded. Check the java.library.path system property.
From the above error i realised that the ntlmauth.dll is to be loaded to path. I compiled and run the application as follows,
java -Djava.library.path=<dll_lib_path>
still i get the same error,
any suggestions to overcome this error.
regards,
Shefu
View 3 Replies
View Related
Jun 22, 2007
We are using RS2005 for a year now and never had any problems especially with mail subscriptions.
Since we transferred from single RS machine to web farm everything works ok except mail subscriptions. Subscription sometimes (?!?!?!?!) refuse to export report to a document of any kind. I repeat that this is a random thing which is more often with PDF and less with Web Archive or Excel. We are using shared schedules and on demand execution of AddEvent stored procedure by night batches to send mail to users. Also, original error from RS log says something that this kind of operation is not supported for server working in native mode. We don't have SharePoint so we never used it in any other way then native mode and it worked.
Any idea will be appreciated!
Thanks in advance.
Update 26.06.2007
It seems that problem is not loading dll used to export report to a file but loading email subscription extension (dll that needs to be loaded for execution of email subscription.)
Original error from RS Log:
w3wp!library!1!06/22/2007-11:06:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: The operation is not supported on a report server that runs in native mode., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: The operation is not supported on a report server that runs in native mode.
w3wp!extensionfactory!1!06/22/2007-11:06:43:: e ERROR: Exception caught instantiating Report Server DocumentLibrary report server extension: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.TypeInitializationException: The type initializer for 'Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider' threw an exception. ---> Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedNativeModeException: The operation is not supported on a report server that runs in native mode.
--- End of inner exception stack trace ---
--- End of inner exception stack trace ---
at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandle& ctor, Boolean& bNeedSecurityCheck)
at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean fillCache)
at System.RuntimeType.CreateInstanceImpl(Boolean publicOnly, Boolean skipVisibilityChecks, Boolean fillCache)
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
at Microsoft.ReportingServices.Diagnostics.ExtensionClassFactory.CreateExtensionObject(Extension extConfig).
View 6 Replies
View Related
Feb 8, 2004
Hi All,
It's probaly still Sunday in most areas, but hope I get a quick response on this 1.....
I'm doing ASP with SQL 2000. And for the moment, I write inline SQL Scripts into my ASP pages. Store procs can only come later ( don't ask why...).
So as most of u will know, if any characther from the textboxes comes with a ' , everything will go haywire!
Thus, I'm using this existing code to solve the prob:
FAddress = Replace(FAddress, "'", "%%")
Call OpenDB()
SQL_query =" SET NOCOUNT ON" & _
" set DateFormat dmy" & _
" declare @FAddress varchar(100)" & _
" set @FAddress='"& FAddress &"'" & _
" set @FAddress=(replace(@FAddress,'%%',''''))" & _........and so on
Is there a better way? Some problems from this is if I am inserting large info in a text datatype, I can't do it.....
Some code or function that I can call and apply to my entire system without recoding alot....:)
SQL and ASP jedi masters...please enlighten me.
View 3 Replies
View Related
Jul 6, 2007
Hi,
I am new to the forum. I need help in solving the following quary.
Table structure:
Region: region_id, name
Employee: employee_id, name, region_id
Sales: sales_id, employee_id, sale_date, sale_amount
-there’s an individual entry in the sales table for each sale
Problem
Write a query that returns a list of the Regions and the number of employees in each region. The employee only gets added to the count if they had total sales greater than $50,000 last month. Sort the information by the number of employees per region who fit this criteria.
Thanks,
Divya
View 16 Replies
View Related
May 30, 2007
"High priority system task thread: Operating system error Exception 0xAE encountered."
we are seeing this on one of our development servers, running SQL 2005 Enterprise SP1. The symptom is that after the sql service has been running a while (order of days), this error starts getting written to the sql server log file over and over, and eventually the logfile fills the drive.
Apparently it's fixed by this hotfix, but our ops team doesn't want to install this - they'd rather just cycle the service and delete the log when it happens.
I was wondering if anyone else has seen it might know the root cause so we might be able to workaround it without cycling the service. I know, lame question. The correct answer is "install the hotfix" or "install sp2" but our ops team won't do that for now...
www.elsasoft.org
View 2 Replies
View Related
Mar 6, 2008
I am very new to SSIS. Can someone give me a basic out line to this problem. I kind of understand control tasks, data flow, etc... but not in details(watched couple of webcasts). I need to see something like below in action to understand this better.
Basically, I need to process a flat csv file on daily basis and load it into a table. As I am loading the records, I will need to verify(on a key column) to see if record exists in table already. If so then just update the record otherwise insert a new record. When I find a record, I need to possibly do a checksum on a set of columns before I do update. So, only update if these set of columns are different from file vs. table. I also need to keep performance in mind as I am processing this record one at a time looking up this record. I am thinking this should be fairly easy but I am getting little lost in control tasks and dataflow as to what goes on what. By the way I am using visual studio 2005 and sqlserver 2005.
I would appreciate your help. thanks again. I dont mind an example solution file.
View 3 Replies
View Related
Mar 26, 2008
Hello all,
First off, I appreciate the time that those of you reading and responding to this request are offering. My quesiton is a theoretical and hopefully simple one, and yet I have been unable to find an answer to it on other searches or sources.
Here's the situation. I am working with SQL Server 2005 on a Windows Server 2003 machine. I have a series of databases, all of which are in Full recovery mode, using a backup device for the full database backups and a separate device for the log backups. The full backups are run every four days during non-business hours. The log backups are run every half hour.
Last week, one of my coworkers found that some rarely-used data was unavailable, and wanted to restore a database to a point in time where the data was available. He told me that point in time was some time back in November.
To accomplish this, I restored the database (in a separate database, as to not overwrite my production database) using the Point in Time Recovery option. I selected November from the "To a point in time" window (I should note that this window is always grey, never white like most active windows, it seems), and the full database backup and the subsequent logs all became available in the "Select the backup sets to restore" window.
I then tried a bevy of different options from the "Options" screen. However, every restore succeeds (ie: it doesn't error out), but seems to be bringing the database back to a current point in time. It's never actually going back to the point in time I specify.
My questions are as follows:
a) Is it possible to do a point in time recovery to a point in time BEFORE the last full database backup?
b) If so, what options would you recommend I use? (ie: "Overwrite the existing database", restore with recovery, etc etc).
I again appreciate any and all advice I receive, and I look forward to hearing from anyone and everyone on this topic. Thank you.
Ryan
View 4 Replies
View Related
Feb 16, 2007
hello everyone,I am using VS 2005 and sql server 2000. I have a web application which uses a connectionstring with a user id and pwd. Everything is fine, I can execute normal sql statements from the code behind. I cannot execute a stored procedure...I get this error. Could not locate entry in sysdatabases for database 'exec usp_add2DB (my parameters are included here, deleted for simplicity reasons)No entry found with that
name. Make sure that the name is entered correctly. I have given execute permission for the user, and the name of the storedproc is correct. the name of the server is also correct....pls pls help me what is wrong here...
View 4 Replies
View Related
Nov 19, 2006
Hi,I am new to SQL express and try to solve the 4GB size limitation.Is there a possibility to create a new database file every time I getto the limit?How can I do that with C#? how can I create new database file everytime it gets full?Can I be connected to two database files at the same time (the full dband the new db)?thanks in advance,oren
View 1 Replies
View Related
Jun 15, 2006
I am migrating a pocket PC application from VS 2003 to VS 2005 and a few weeks ago I hit the following problem when replicating
A SQL Mobile DLL could not be loaded. Reinstall SQL Mobile. [ DLL Name=sqlceca30.dll]
Scanning forums for help I saw that other people had had this problem and one
http://www.eggheadcafe.com/aspnet_answers/NETFrameworkCompactFramework/Feb2006/post25814466.asp
suggested that this problem could be circumvented by getting the replication object early and then continuously using the same object for subsequent replications.
I did this and it works a lot better now but ever so often I get another error which is
Native Error 28559 SQL Mobile encountered problems when opening the database
My only option at this point is to stop and start the application which cures the problem.
View 4 Replies
View Related
Sep 8, 2007
I receive error 25123 on my PPC (audiovox 6600) in a reproducable way (usually) with .net 2.0 application that is using SQL CE that I wrote:
Open the application
Connect to the database
Close the applicaton
Re-Open the application
Connect to the database <-- Error occurs
I will also receive the error if my application isn't the first application launched (or very close to the first to launch).
I don't believe it's a memory issue as according to the memory manager I have plenty of memory:
At boot up only start screen items loaded: 18.46 Used 49.89 Free
Launch Resco File Explorer to click EXE: 19.18 Used 49.18 Free
Launch my application (no DB connection): 23.64 Used 44.71 Free
Connect to the DB and do select count(*) from a table with 0 rows: 26.27 Used 42.08 Free
Close the application (this.Close() on the form: 19.38 Used 48.97 Free
Relaunch App and connect to DB receive error: around 38 Used around 30 free
I was unable to reproduce the issue right now while typing this message, the last sets of numbers are from memory, and include other applications that are currently running.
The only way I have to get SQL CE to load again is to soft reset the PPC. If the application is able to connect to SQL CE at least once it is fine up till I close it and re-open the application. So it either connects and runs great, or it can't connect at all.
Any help in resolving this issue would be greatly appreciated.
Wayne
View 1 Replies
View Related
Sep 18, 2006
When I try to run my application using VWD from the file system I can connect and run the application and it connects to the remote SQL 2000 server with no problem.However, when I publish to my web server I get the folloiwng error message: Anyone got any ideas?? Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: The entry 'MCLConnectionString' has already been added.Source Error: Line 11: <appSettings/>
Line 12: <connectionStrings>
Line 13: <add name="MCLConnectionString" connectionString="Data Source=GEACO1INTR1;Initial Catalog=MCL;Persist Security Info=True;User ID=ASPNET;Password=PAUL0001" providerName="System.Data.SqlClient"/>
Line 14: </connectionStrings>
Line 15: <system.web>Source File: c:inetpubwwwrootmcltestweb.config Line: 13
View 4 Replies
View Related
Feb 14, 2008
My C# asp.net web application is throwing an exception and the message is the following:
RAISERROR could not locate entry for error 60002 in sysmessages.
The error occurs in the stored procedure. Can anyone tell me what I need to do to fix this problem? Note that if I manually run the stored procedure, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74
RAISERROR could not locate entry for error 60002 in sysmessages.
View 3 Replies
View Related
Feb 27, 2008
.im trying to run a script. and i get the errror at the topic. what can i do?
my pointed code is:
Code Snippet
Sur.open "PROVIDER=MICROSOFT.JET.OLEDB.4.0;DATA SOURCE=" & strMDBPath
im running on windows vista 64x bus.
View 1 Replies
View Related
Jun 20, 2007
Hi there
I have recently installed a new server for a client running SBS2003 R2 with SQLServer 2005.
I noted that the backup failed the SQL Server database on the consistenty check. On checking the event log I see this message as per above.
It reads in the description
c:datalawsqldatadata41_Data.MDF:MSSQL_DBCC6:
Operating system error 112(error not found) encountered.
Looking in the error log I see :
Configuration option 'user options' changed from 0 to 0. Run the RECONFIGURE statement to install.
Error: 17053, Severity: 16, State: 1.
C:DataLAWsqldatadata41_Data.MDF:MSSQL_DBCC6: Operating system error 112(error not found) encountered.
DBCC CHECKDB (data41) WITH no_infomsgs executed by NT AUTHORITYSYSTEM found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 26 seconds.
This is a new server with about 90% of disk space NTFS still available
Any idea's thanks.
View 5 Replies
View Related
May 26, 2008
Hi All,
I am using windows 2003 server and i have installed SSAS 2005 and configured http request for AS 2005 with this below url : http://www.microsoft.com/technet/prodtechnol/sql/2005/httpasws.mspx. I had tried all the possiblities given in this url. But i am getting like "Test connection failed because of error initializing provider. The HTTP Server returned the following error : Not found" when i create udl file. Moreover i have installed MSOLAP 3.0 and OLAP 9.0 provider and MSXML 6.0 Parser.
Can you anyone please provide solution for this?
Thanks in advance,
Anand Rajagopal
View 1 Replies
View Related
Dec 28, 2005
Hi,I keep getting this error message for a trans.log backup.Operating system error112(error not found).The disk has about 6GB space free, and the backup should only take upabout 550 MB, so I would think it is not space related but...The disk is NTFS.Any ideas?
View 2 Replies
View Related
Nov 20, 2007
Hi.
I am stuck with error: An error occurred while receiving data: '64(error not found)'.
My Service Broker configuration:
Server A initiator,
Server B target.
Server A sends message to Server B, Server B sends back reply.
On this stage I receive problem. Server B message does not come to server A.
It stays on sys.transmission_queue on server B.
This problem occurs only during initial setup. During initial setup, on Server B messages, queues, services, contracts, routes, bindings are created. On Server A: routes and bindings. As a last step, a message is sent to Server B.
So, reply on this message never comes. Initial setup is run using procedure with execute as €˜owner€™, owner=€™dbo€™.
But, whenever I send messages after that, everything works fine.
Any suggestions?
Please :-)
View 7 Replies
View Related
Oct 31, 2007
Hi,
I have set up SB between 2 databases, and I keep geting a variety of error messages in the queue on both sides. The first is:
An error occurred while receiving data: '10054(error not found)'.
And on the other side its
Service Broker received an error message on this conversation. Service Broker will not transmit the message; it will be held until the application ends the conversation.
The only difference between this and the tutorials is that the TCP port have been moved to 4321 instead of 4022, and this has been done both sides, because something else was blocking the 4022 port. This one is definately free on both sides. I have recreated the certificates, the users, the end points, the queues and the services multiple times, and checked them all in the sys.routes etc and they all seem fine.
I do also get a message in the queue that I can receive sometimes that tells me I don't have rights to the service on the other machine. I can send a message to itself and it doesn't complain.
Both machines are on the same domain, and I have also tried to grant rights to public to no avail.
Help!
TIA
Ian.
View 2 Replies
View Related
Nov 13, 2007
heres my code behind in UploadImage.aspx.vb _____________________________________________________________________________________________________________________________Imports System.Data.SqlClientImports System.ConfigurationImports System.IOPartial Class UploadImage Inherits System.Web.UI.Page Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim conn As New SqlConnection Dim comm As New SqlCommand Dim connStr As String connStr = ConfigurationManager.ConnectionStrings("TESDA").ConnectionString conn = New SqlConnection(connStr) comm = New SqlCommand("Insert into TImage (CategoryName,Picture,MimeType) VALUES (@name,@pic,@type)", conn) 'gi convert and image to byte array Dim data(FileUpload1.PostedFile.ContentLength - 1) As Byte FileUpload1.PostedFile.InputStream.Read(data, 0, FileUpload1.PostedFile.ContentLength) comm.Parameters.Add("name", System.Data.SqlDbType.Text) comm.Parameters("name").Value = System.IO.Path.GetFileName(FileUpload1.PostedFile.FileName).ToLower comm.Parameters.Add("pic", System.Data.SqlDbType.Image) comm.Parameters("pic").Value = data comm.Parameters.Add("type", System.Data.SqlDbType.NChar) comm.Parameters("type").Value = FileUpload1.PostedFile.ContentType If FileUpload1.HasFile = True Then Try conn.Open() comm.ExecuteScalar() Label1.Text = "Successfully uploaded" conn.Close() Finally End Try End If End Sub Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load End Sub Protected Sub Button2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button2.Click Server.Transfer("image.aspx") End SubEnd Class______________________________________________________________________________________________________________________________then here my code behind in Image.aspx.vb________________________________________________________________________________________________________Imports System.Data.SqlClientImports System.ConfigurationPartial Class image Inherits System.Web.UI.Page Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Dim conn As New SqlConnection Dim comm As New SqlCommand Dim connStr As String Dim reader As SqlDataReader Dim dataBuffer() As Byte connStr = ConfigurationManager.ConnectionStrings("TESDA").ConnectionString conn = New SqlConnection(connStr) comm = New SqlCommand("Select * from TImage where no = @no", conn) comm.Parameters.Add("no", System.Data.SqlDbType.Int) comm.Parameters("no").Value = 5 conn.Open() reader = comm.ExecuteReader reader.Read() Response.Clear() Response.AddHeader("Content-type", reader("CategoryName")) Response.AddHeader("Content-type", reader("MimeType")) Dim blen As Integer = CType(reader("picture"), Byte()).Length dataBuffer = reader("Picture") Response.OutputStream.Write(dataBuffer, 0, blen) Response.Close() conn.Close() End SubEnd Class_____________________________________________________________________________________________________________________ When I am going to call the Image.aspx it always prompt this error:XML Parsing Error: no element foundLocation: http://localhost:4730/tesdaweb/UploadImage.aspxLine Number 1, Column 1:Is there something wrong in my codes... Please helpthanks...
View 1 Replies
View Related
Aug 23, 2007
We are using Service Broker to synchronise two databases using async triggers (using a middle server to preform data mapping processing). We are re-using dialogs as we want to ensure order when sending messages which contain the data to be synced. A dialog is created between each intiator and target service (there are 3 of each) which is kept open indefinately (we are only ending conversation upon receiving an end conversation message or error message).
We seem to get it working for a period then after about 1 hour it seems to stop sending and we see the following error in SQL Profiler:
An error occurred while receiving data: '64(error not found)'
Any ideas what could be causing this? We do not see any errors or end conversations. It seems to happen at irregular points.
View 2 Replies
View Related
Oct 27, 2006
I'm having a problem that I think is due to corrupt data. Depending on
the column I use in my order by clause two problems are occuring.
1. No results are returned and I get this error:
A floating point exception occured in the user process.
2. Results are returned but there are a different number of rows depending on which columns I use in my Order By clause.
Examples
SELECT * FROM SymbolStats
ORDER BY calc_date, symbol
Returns - 12207 rows but only includes one of the 25 dates in the table.
----------
SELECT * from SymbolStats
ORDER BY current_hv
Returns - 0 rows.
----------
SELECT * from SymbolStats
ORDER BY average_hv
Returns - floating point error
With more conditions in the WHERE clause the number of results returned varies greatly.
The
fact that different numbers of rows can be returned from the same query
only differing in how they are ordered seems like a bug.
Does this sound like corrupt data? If so, what are the best methods for fixing it?
Thanks,
patrick
View 1 Replies
View Related
Nov 5, 2015
I am trying to export ssrs report from sharepoint to pdf file.But i am getting error in it."Sorry, Something Went Wrong".But when i try to render report in visual studio when i preview report. It gets exported in 14 minutes. but there is no error.
View 2 Replies
View Related
Apr 14, 2008
I installed SQL Server 2005 Express Edition on my Laptop for use with IIS 7.0; Everything was working fine untill I opened the Report Server Site with WVD 2008, it asked me to Modify the web.config for debugging. After doing that the Report Server Site started showing an error page saying there was a rsInternal error. I tried fixing the Web.config by hand but it dident work, so I tried completly reinstalling the SQL Server 2005 Express Edition. It reinstalled perfectly excluding the Report Server. When it came time to install the Report Server; I got the error message.
The setup has encountered an unexpected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation.
--Actual Log--
Microsoft SQL Server 2005 9.00.3042.00
==============================
OS Version : Professional Service Pack 1 (Build 6001)
Time : Mon Apr 14 04:41:42 2008
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQLSupport_1.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft Office 2003 Web Components
Product Version : 11.0.6558.0
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_OWC11_1.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server 2005 Backward compatibility
Product Version : 8.05.2004
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_BackwardsCompat_1.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQLSupport_2.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server Native Client
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQLNCLI_1.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SqlWriter_1.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server 2005
Product Version : 9.2.3042.00
Install : Successful
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_SQL.log
-----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Reporting Services
Error : The setup has encountered an unexpected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation.
----------------------------------------------------------------------------
Machine : JEOSYSTEMS-0002
Product : Microsoft SQL Server 2005 Reporting Services
Product Version : 9.2.3042.00
Install : Failed
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0008_JEOSYSTEMS-0002_RS.log
Last Action : InstallFinalize
Error String : The setup has encountered an unexpected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation.
Error Number : 29528
-----------------------------------------------------------------------------
If anyone knows how to get Report Services to install after Error number 29528 occurs, Please let me know.
Thanks.
View 6 Replies
View Related
Oct 18, 2007
Hi
I am trying to deploy the reports on the share point site which is integrated with the reports Server.
I am getting below error while deploying it.
Sharepoint Server, Reports Server and Database Servers are on 3 different boxes.
===================================
A connection could not be made to the report server http://vstsvr:171/sites/wslReports. (Microsoft Report Designer)
===================================
Server was unable to process request. ---> The request failed with HTTP status 401: Unauthorized. (System.Web.Services)
------------------------------
Program Location:
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2006.ReportingService2006.ListSecureMethods()
at Microsoft.ReportDesigner.Project.ReportServiceClient2006.CheckAuthenticated()
at Microsoft.ReportDesigner.Project.ReportClientManager.DetectEndpointAndAuthenticate(String url, ICredentials credentials, String& authCookieName, Cookie& authCookie, EndpointType& endpointType)
at Microsoft.ReportDesigner.Project.ReportClientManager.GetCredentials(String url)
at Microsoft.ReportDesigner.Project.ReportProjectDeployer.PrepareDeploy()
Can any one help on this.
Thanks
Devanand
View 1 Replies
View Related
