Hi,
i am trying to load output of count(X) and sum(salesamt) into the same column. if iam using transformation data task what datatype should i be converting the two outputs to accomidate result as
10.00 --count
234.00 --saleamt
22.00 --count
1000.00 --saleamt
I'm writing a custom source component that reads data from a SharePoint list with dynamic mapping to output columns. It's my first custom component and it's based on several samples and tutorials from Internet
Output columns are not created by the component itself, they must be added by user at design time. The component makes dynamically an association between SharePoint fields and available output columns at run-time (based on an mapping table).
I made a very basic skeleton and I encounter a problem when I add a column to output: it has no datatype and when I try to set one I have an the error Property value is not valid, The component xxxxxx does not allow setting output column datatype properties.
Imports System
Imports Microsoft.SqlServer.Dts.Pipeline
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
<DtsPipelineComponent(ComponentType:=ComponentType.SourceAdapter,
DisplayName:="SharePoint Dynamic Assoc List Source",
[Code] ....
Please i need to display the money column in DataBase in an asp.net page but i get something like this 786.0000 how can i format it so that i get something like 786.00
Thanx
Greetings,
How do you keep or round a money datatype to use only 2 decimal places? I have an instance where I am multiplying a money with a decimal datatype. The decimal has up to 8 decimal places. This is causing the money datattype to extend to 4 decimal places. This makes for problems when I am comparing 2 values.
ex.)
IF 14.88 >= 14.8821
99% of the time this does not happen, but is causing problems. Does anyone have any suggestions?
thanks in advance,
Roger
Do you usually use the money or smallmoney datatype for US dollars in a table, or do you use a decimal datatype, and if so which. Any opinions on the advantages and disadvantages of each?
If you use money or smallmoney, do you usually add a constraint to make sure the value is even to the penny (no $24.3487 type amounts)?
CODO ERGO SUM
Using the following script...
create table a
( policy_id int not null,
amount smallmoney not null);
insert a values (1, 100.0);
select policy_id, sum(amount) sum_amount
into b
from a
group by policy_id;
Why is the datatype, of column sum_amount in table b, money rather than smallmoney?
Hi there,I have a table named Action. This table has a column InPrice with datatypenvarchar(12). I want to change its datatype from nvarchar(12) to money. Ibrowsed through the values and removed any dots. Th column now has onlynumeric values (and commas for decimal values such as 105,8). When I try tochange the datatype from nvarchar to money, following mesage is displayed:ADO error: Cannot convert a char value to money. The char value hasincorrect syntax.How can I solve this problem? I cannot figure out which values are causingthis error.Thanks in advance,Burak
View 4 Replies View RelatedHi,
The default number of decimal points for 'money' data type is 4. Can I change it as 6?
Eg 120.123456
Thanks!
I am running Microsoft SQL Server 2012.
I had created a database named "Company-Data" that contains a table named "tblStock". This table contains several columns such as ID, Product, Quantity. The datatype for the column "Quantity" is INT.
I had entered 100 records to the table, now I want to change the datatype for the column "Quantity" from INT to MONEY.
How can we do this without loosing the data that has been entered the the column previously.
Please Help me ...
How to set Money datatype decimal field with example .
What is the difference between Money and (Float or Decimal) Datatype. If we use Float or Decimal instead of Money, will we loose any functions..?
View 4 Replies View Relatedcast(round([YearlyProfit]-[MonthlyProfit],0)as int),
cast(round(isnull(sum(SalesProfit]),0),0) as int
How can I convert these columns to money so that I can display the result with comma included.
I need to create an Bulk upload utility using ASP.Net and SQL Server. Below is the process for the uploads -
Excel Template wherein user will enter the details. A Tab-delimited output file will be generated using the VBA.
There are 2 tables - one is Temp Table which is replica of the the final table and second is the final table
Using File.OpenText(filePath).ReadLine() - All the Rows from the tab delimited data file will be inserted into DataTable.
using SQLBulkCopy the tab-delimited data file data will be inserted into the Temp Table.
Data will be validated based on the data inserted in the temp table. If the data as errors then the temp table will be cleared else the data will be inserted from the temp table to the final table.
My Issue is that in both the tables there is a column (Name : PeopleKey (Int PrimaryKey)). If the user enters Alphabetic value then the Bulk Utility is failing. Below are the two options in my mind -
1. I can change the DataType in Temp table from int to VARCHAR. So, the data can be inserted at first and then I can validate and get the data corrected. But i am not sure whether it is the right way to fix issue as the source and target tables columns are different.
2. When the data in inserted into the Datatable by following Step 3. So, once the data in inserted into DataTable then i can validate there. Thus the source and target tables Datatype will be same.
I need to always have a formatting of 999,999,999.00 in a column called PropertyMap9.
PropertyMap9 is always a nvarchar(max)
How do I SET a value using a CONVERT or CAST to accomplish this ?
Why does this give me a syntax error ? The PropertyMap7 set actually works and performs the calculation and sets the new value for that row, however the next line gives an error. I need all 3 columns PropertyMap9, 8, and 7 to always have the above formatting, while still maintaining the nvarchar(max) datatype in the column. HELP!
update PropertyMapValues
set PropertyMap7 = CONVERT(NVARCHAR(MAX),CAST(PropertyMap8 AS money) - (CAST(PropertyMap9 AS money)),1)
set PropertyMap9 = CONVERT(NVARCHAR(MAX),CAST(PropertyMap9 AS money))
END
Msg 102, Level 15, State 1, Procedure UpdatePropertyMap7, Line 59
Incorrect syntax near '='.
I am trying to migrate data from MySQL 5.0 to SQL Server 2005. The MySQL database has a table which stores the profile description in different languages like (Arabic, Spanish etc). I use MySQL ODBC 5.1 driver for creating the ODBC connection and creating a ADO connection in SSIS using that ODBC. The datareader source connection is set to this ADO connection.
When I view the properties of columns in Datareader source it shows as Unicode, which is good. But when I migrtae to SQL Server 2005 I get junk data instead of the data in Arabic, Spanish etc.
Am I missing something or is there any other alternative to do the data transfer correctly?
Hi all!
I want to create a table. One of the columns should be in the data type MONEY with two digits on the right side of the decimal point.
How is that possible?
Thanks a lot and greetings from vienna
landau
Hi,
I have to read data from an MDB file into SQL Server. Simple, but I need to place a literal into every row. In my OLE DB Source I would use:
SELECT '001' AS col1, foo, bar FROM Table1
But the problem is that I pass my value for col1 into the package from C# using Managed DTS.
So I set up my OLE DB Source using "SQL command from variable." And I have two variables one to receive the value of for col1 (col1) and one that is an evaluated expression that has a dynamic sql statement (dynSql).
col1 is a String as is dynSql. dynSql looks like this:
"SELECT " + @[col1] + " as col1, foo, bar FROM Table1"
Now as long as I set the value of col1 to '001' that should work. Right? Well not exactly. The destination for col1 in SQL Server is a char( 3 ). But the package makes the col1 column from the source a DT_WSTR. Which causes the famed: "Text was truncated or one or more characters had no match in the target code page.".
Is there a better solution?
Thanks. Kenneth.
I just joined a bank related IT department where the existing IT team is already working on creating a new application since a year now and designed database on SQL Server 2012, the amount (currency related) column's datatype found different in tables some where it is decimal and somewhere found different. I want to suggest them Money datatype to choose where we are dealing with currency related columns. My question is, is that correct to choose Money datatype or should I ignore this?
View 3 Replies View RelatedI have a special need in a view for a money column to look like money and still be a money datatype. So I need it to look like $100.00 (prefered) or 100.00(can make work).
If I convert like this '$' + CONVERT (NVARCHAR(12), dbo.tblpayments.Amount, 1) it is now a nvarchar and will not work for me.
How can I cast so it is still money? by default the entries look like 100.0000.
They must remain a money datatype.
I have a data source that I access via odbc in a DataReader Source component in SSIS. I can access the data fine. However, I am having problems with certain fields that are numeric (specifically home prices ranging from 100,000.00 to 99,999,999.00). In the advanced editor for my data reader source under the input and output properties tab, in data reader output under the external columns and output columns, these fields for some reason default to numeric data types with a precision of 4 and a scale of zero, not large enough to hold the data that is coming in. This causes errors that make the data come in as null (after i specify to ignore the errors).
I can change the precision and scale to 18 and 4 in the external columns, but when I try to change the datatype, precision or scale in the output columns I get the following message:
Property Value is not valid.
The details are:
Error at Import DataReader Source: The data type of output columns on the component "DataReader Source" cannot be changed.
Error at DataReader Source: System.Runtime.InteropServices.COMException (0xC020837D)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.SetOutputColumnDataTypeProperties(Int32 iOutputID, Int32 iOutputColumnID, DataType eDataType, Int32 iLength, Int32 iPrecision, Int32 iScale, Int32 iCodePage)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostSetOutputColumnDataTypeProperties(IDTSManagedComponentWrapper90 wrapper, Int32 iOutputID, Int32 iOutputColumnID, DataType eDataType, Int32 iLength, Int32 iPrecision, Int32 iScale, Int32 iCodePage)
Any help is greatly appreciated.
Dave
Hi,
I am trying to create a program that transfers tables to flat files.
At this point in time, I have suceeded in created one that creates delimited files.
However, I am now trying to create fixed-width files as you can do with the SSIS designer, but programatically.
Is there a way to programatically determine the width of a column from the source table? I can not seem to find any kind of function or member that stores this information or allows me to retrieve it.
I know what I need to change in order to set a width for a column, but I just don't know how to find the width without just asking the user to provide one.
Hi folks, need ur help.
I want to convert strings from a textfile and convert em to appropriate datatype for the destination columns, eg if i have a source value in string 11111 and the destination column is MONEY. I want to use CONVERT(functionretruningdatatype,'11111') in my insert statement.
Any guidance!
Howdy!
Posted - 09/10/2007 : 15:53:26
Hey all - got a problem that seems like it would be simple (and probably is : )
I'm importing a csv file into a SQL 2005 table and would like to add 2 columns that exist in the table but not in the csv file. I need these 2 columns to contain the current month and year (columns are named CM and CY respectively). How do I go about adding this data to each row during the transformation? A derived column task? Script task? None of these seem to be able to do this for me.
Here's a portion of the transformation script I was using to accomplish this when we were using SQL 2000 DTS jobs:
'**********************************************************************
' Visual Basic Transformation Script
'************************************************************************
' Copy each source column to the destination column
Function Main()
DTSDestination("CM") = Month(Now)
DTSDestination("CY") = Year(Now)
DTSDestination("Comments") = DTSSource("Col031")
DTSDestination("Manufacturer") = DTSSource("Col030")
DTSDestination("Model") = DTSSource("Col029")
DTSDestination("Last Check-in Date") = DTSSource("Col028")
Main = DTSTransformStat_OK
End Function
***********************************************************
Hopefully this question isnt answered somewhere else, but I did a quick search and came up with nothing. I've actually tried to utilize the script component and the "Row" object, but the only properties I'm given with that are the ones from the source data.
thanks in advance!
jm
Hi everyone,
I am using SSIS, and I got the folowing error, I am loading several CSV files in a OLE DB, Becasuse the file is finishing and the tak dont realize of the anormal termination, making an overflow.
So basically what i want is to control the anormal ending of the csv file.
please can anyone help me ???
I am getting the following error after replacing the '""' with '|'.
The replacng is done becasue some text sting contains "" wherein the DFT was throwing an error as " The column delimiter could not foun".
[Flat File Source [8885]] Error: The column data for column "CountryId" overflowed the disk I/O buffer.
[Flat File Source [8885]] Error: An error occurred while skipping data rows.
[DTS.Pipeline] Error: The PrimeOutput method on component "Flat File Source" (8885) returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
[DTS.Pipeline] Error: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0047039.
[DTS.Pipeline] Information: Post Execute phase is beginning.
apprecite for immediate response.
Thanks in advance,
Anand
I want get DataType of Column in Table
ex: nvarchar, varchar, etc...
Help me !!
I've changed the width of a column from 128 to 64. How to EM shows 64, while sysobjects and sp_help show 128 ?? Even after disconnecting and re-connecting (just to be extra sure).
View 2 Replies View RelatedHello I am having a table
table1
col1 (bit)
and i want to changethe col1 type for smallint
col1 (smallint)
true will be = 1
and false = 0
how can i do it ??
thank you
I'm using this query to sum the values. The cost column is a float datatype and what could I differently do here to sum the cost. I'm unable to sum the cost.
Also is there any way I change the datatype to int for Cost column without losing the data.
select ID, MAX(Date) Date, SUM(Cost) Cost, MAX(Funding) Funding from Application
group by ID
Hi,
I have a data flow task where I have mutiple columns (of different data types) , I want to create a single column using all these columns in XML format and load it into a table with a column of datatype XML. Can I accomplish this using Derived column tranformation?
Thanks
hi ,How can I find sql Datatype (like NVARCHAR , DESIMAL & .. ) and size of columns and also is it Identity or not in a Table of SQl server?
View 4 Replies View RelatedHello,How do I change the datatype of a column in a CSV file. Preferably in the select statement (apparently Cast, Convert, & Replace functions don't work when selecting from a CSV). I have a page where users upload their CSV files to and then I use SQLBulkCopy to insert all the records into my sql table. The problem is with columns of money data. EX: "$2,000" >> 2000The CSV file interprets the "$2,000" as a string of text. How do I convert it to a decimal so I can insert it into my sql database?
View 4 Replies View RelatedHi all
A table consists of a column with name "Createddate" with datatype smalldatetime.
defaultly iam binding getdate() to Createddateso it is storing in tthe below format --
Mar 12 2008 11:38AM
while retreving iam mentioning...
select * from tbl where convert(varchar,createddate,101) = '03/12/2008'
it is showing no records ..even though records r there with --march 12 2008.
plz do needful in this senario.
thanks & regards
kanth
Hi everyone....
I need a column in my table that its DataType should be as integer arrays how can I implemant it in my sqlserver table.
Any help appreciated.