Sp3a Does Not Seem To Apply
Feb 26, 2004
I am trying to install sql server sp3a. I checked the version before and after the sp is applied, and it shows:
8.00.194
Now, according to the sp3a readme:
http://support.microsoft.com/default.aspx?scid=/support/servicepacks/SQL/2000/SP3ReadMe.asp
the following versions should show:
SQL Server 2000 Original Release 8.00.194 RTM
Database Components SP1 or Desktop Engine SP1 8.00.384 SP1
Database Components SP2 or Desktop Engine SP2 8.00.534 SP2
Database Components SP3 or SP3a, or Desktop Engine SP3 or SP3a 8.00.760 SP3
This would imply that after installing sp3a and restarting, the version reported should now be 8.00.760. However, it still shows 8.00.194. So it appears to have not really installed, althought the sp3a installation ran without incident. So, how can I get the sp3a to not just act like it installed, but actually get it to install? Also, I have shut down all mssql services and rebooted, applied patch, and rebooted again. Doesn't help.
Also, if it is really installing, is there another way to tell?
Anyway, I really need to be able to install sp3a to see if it fixes another problem I'm having. Unfortunetly, since I can't even tell if the sp3a is installing, I can't tell if it really doesn't help or not. Thanks.
Tony F
View 2 Replies
ADVERTISEMENT
Nov 27, 2007
Hi... I'm reading the MS Press 70-442 Self-Paced Training kit, and I'm having problems with this example.
I'd like help getting it to work correctly, or understand why it is isn't working the way I planned.
On page 67, the lab is about the APPLY operator (CROSS APPLY and OUTER APPLY). I first have to input a sample table-valued function into the AdventureWorks database:
Code Block
CREATE FUNCTION fnGetAvgCost(@ProdID int)
RETURNS @RetTable TABLE (AvgCost money)
AS
BEGIN
WITH Product(stdcost)
AS
(
SELECT avg(standardcost) as AvgCost
FROM Production.ProductCostHistory
WHERE ProductID = @ProdID
)
INSERT INTO @RetTable
SELECT * FROM Product
RETURN
END
and then run a sample T-SQL statement
Code Block
SELECT p.Name, p.ProductNumber,
Convert(varchar, cost.AvgCost,1) AS 'Average Cost'
FROM Production.Product p
CROSS APPLY fnGetAvgCost(p.ProductID) AS cost
WHERE cost.AvgCost IS NOT NULL
ORDER BY cost.AvgCost desc
My problem is with the WHERE clause... According to page 56, CROSS APPLY returns only rows from the outer table that produces a result set, so why do I need to explicitly filter NULL values?
When I remove the WHERE clause, the query retrieves lots of NULL AvgCost values.
Again, according to page 56, it is the OUTER APPLY that returns all rows that return a result set and will include NULL values in the columns that are returned from the table-valued function.
So, in short, I don't see the difference between CROSS APPLY and OUTER APPLY, using this example, when I remove the WHERE clause?
(Please refrain from introducing another example into this question.)
View 8 Replies
View Related
Jan 23, 2004
I'm trying to upgrade my MSDE to sp3a, I'm following the instructions.
c:sql2ksp3MSDE
setup /upgradesp sqlrun DISABLENETWORKPROTOCOLS=1
But receive the following message:
Invalid product code was found. Check if product is installed.
Then
Could not find package to install on the installation media.
Any help?
Thank you.
View 3 Replies
View Related
Aug 5, 2003
Select @@version does not know the difference between SP3 and SP3A.
Does anyone know of a SQL statement that will let me know if I have SP3A??
Thanks.
View 5 Replies
View Related
Jun 24, 2004
We have the rtm version of SQL 2000 and have spent the last 2.5 hours trying to apply SP3a. Nothing on the microsoft support site has pointed us to the solution.
Basically, we start the install after shutting down the services, answer all the questions and then when it starts to copy files it fails with an error
'microsoft data access component failed (-1).
Looking in c:winntdatestup.log, the error is unknown. The c:winntsqlsrp.log file is not touched.
We tried renaming the odbcconf.dll file per a microsoft article and no joy.
We also restored mdac_type.exe file per microsoft article and no joy.
Trying to install SP1 and SP2 - same results.
Anyone got any ideas besides it's time to call Microsoft?
:confused:
View 2 Replies
View Related
Oct 20, 2005
I really don't understand this, in an attempt to upgrade/install SP3a, I download the file sql2kdesksp3.exe, which from the documentation, you can either use for upgrading or new installs. I run a new install; in the new instance, I execute "select @@version" and get "Service Pack 1"??
View 8 Replies
View Related
Apr 30, 2008
Our environment is currently running on SQL 2000 sp3a (win2003) and I'm having an issue with 'max worker threads', so I opened a ticket with Microsoft.
They tell me that SP3a is no longer support and I have to upgrade all our servers to SP4.
We had an issue in my previous company and I was told by a consultant that I shouldn't install SP4 because it caused a lot of issues. I'm aware of the 'AWE enabled' issue, are there any others I should watch out for?
Thanks
View 2 Replies
View Related
Sep 16, 2004
Hi, I've downloaded the SP3a for sql server from the microsoft website. I unpackaged the files into a folder and ran the file setup.bat. I recieved an error that setupsql.exe file was not found. I think theres a folder missing called Setup under the X86 folder. Is there a way I can fix this????????
View 1 Replies
View Related
Jul 9, 2004
After past MDAC it fails running 1st script with error sp3_serv_uni.SQL(1) PLEASE HELP
View 2 Replies
View Related
Jan 14, 2005
Can system databases (master, model, msdb) backed up from SQL2k SP3 be restored to an instance of SP3a? Can they be restored from SP3a to SP3? TIA!
View 4 Replies
View Related
Aug 21, 2007
Hi
Now that support for SQL SP3a has been removed, how does this affect MSDE installations? We've got lots of products installed that have come with MSDE backends, all on SP3a. Is it up to the individual vendors as to whether they continue to support on this version? Backup Exec and Insight Manager are 2 that spring to mind.
thanks
View 1 Replies
View Related
Jun 1, 2006
Hi,
I'm trying to upgrade MSDE with SP4.
I used the following in command prompt.
setup /upgradesp sqlrun INSTANCENAME=MSDEINSTANCE SECURITYMODE=SQL UPGRADEUSER=username UPGRADEPWD=userpassword /L*v C:MSDELog.log
i got the message "Please go the control panel to install and configure system components."
What does it mean?
How to upgrade it?I have tried to edit the line with *V, and using the sa username and password, but i get the same message.
RegardsKenneth Davidsen
View 1 Replies
View Related
Jan 30, 2004
I just downloaded and installed MSDE2000 sp3a for winform and asp.net
quickstart tutorial. But I found it has no sample database such as pubs
and northwind. It used to have these databases. At least in last September
when .Net web Matrix came out.
If this is the case, can someone tell me where to get the sql scripts
to create Northwind database in MSDE?
Becasue the winform tutorial uses this database.
Thanks in advance!
Lei Xu
View 1 Replies
View Related
Jun 14, 2004
I just upgraded my desktop engine MSDE 1.0 to MSDE 2000 SP3a. Everything seemed to go well, MSSQLSERVER AND SQLSERVER Agent Services are running, problem is, I can no longer see the particular instance on the network from Enterprise Manager.
The installation instructions specified that if the Instance was to accept connections from applications on other computers not to specify the DISABLENETWORKPROTOCOLS parameter, so I didn't.
I'm a little green with this, can anyone suggest a place to start troubleshooting?
View 1 Replies
View Related
Jul 23, 2005
I urgently need tom use SP3a upgrade the instance of SQLServer200MSDE runing on my local machine but I am having problems in doing so.My first problem is that when I start the set up procedure I get themessage"A strong SA password is required for security reasons. Please useSAPWD switch to supply the same"Currently the sa password isAbc/def/ghk1Which I think is a 'strong password' according to the microsoft rulesathttp://www.microsoft.com/resources/...sword_tips.mspxI would be grateful if someone could confirm that Abc/def/ghk1 is astrong password.If anyone could point me to some published informal help on installingSP3a then that would also be very helpful (I do of course have the MSread me file). If anyone has a sample command line entry for theupdating then I would find that extremely useful. There is oneinstance of MSDE on my machine, named NetSDK.Best wishes, John Morgan
View 6 Replies
View Related
Jul 23, 2005
A Win2k, SQL2k machine with SP2 that only just now has been updated to SP3afails in different ways. Among other things, when I now start EnterpriseManager, I get a message saying "rebbrui.rll" is missing and the snap-infails to initiate. But then the Manager starts anyway.But the SQL application does not work. I searched around the net, and Ifound that it looks as if SQL Slammer has been on the server. I can tell bythe similar symptoms other users have had, allthough I am not sure. Anyway,when I run some online virusscans and the Symantec SQLexp-tool to removeSlammer, I am told that the system is virusfree. Is that because SP3a toSQL2000 automatically got rid of the virus (if any)?But how do I get the SQL to run without any errors again?The server also runs in Terminal Application Mode.Regards, Lars.
View 4 Replies
View Related
Jul 20, 2005
current config: Windows XP SP1, SQL Server 2000trying to install : SP3a on SQL Server 20001. I downloaded the three files of the service pack from(http://www.microsoft.com/downloads/...&displaylang=en)..2. Saved the three files to a same local directory d:sqlsvr3a.3. Click through each and extracted them to same local directoryd:sql2ksp33. when I try to run the d:sql2ksp3setup.bat, it tells me thatx86setupsetupsql.exe is not found. Indeed, the file is not there inthe extracted folders.Is this a common problem, or am I missing something ?-thanks
View 1 Replies
View Related
Jul 20, 2005
Hi(sorry this has turned into a bit of an epic...thought I'd as theexperts!)SQL 2k, sp3a. Dual xeon 2.4. 2 gig ram. everything on a 3 disk raid 5.Microsoft SQL Server 2000 - 8.00.760 (Intel X86)Enterprise Edition on Windows NT 5.0 (Build 2195: )Problem seems to be some extended procs that seemed to be running fineon a 'vanilla' install on a different server now seem to be failing.Failures occuring c 6 - 10 hours.Sometimes the failure logs as the xp failure with severity 20 that Ikindof expect :s. other times absolutely nothing is logged.There are a variety of error messages - or sometimes nothing at all.http://www.mapinfo.com/common/docs/.../SWMSS48_RN.pdfdescribes one of our issues, which seems to come out on the restartafter a failure:Error event id is 19011, Message "SuperSocket info:ConnectionListen(Shared-Memory (LPC)) : Error 5."That site suggests:[color=blue]>Workaround>Suggested solutions include:>• Obtain a hotfix from Microsoft (http://www.microsoft.com). You will[/color]need to >cite the 94302[color=blue]>reference number.>• Turn off shared memory in the client network configuration utility[/color]to >disable shared[color=blue]>memory.>• Replace the SQL Server SSMSLPCN.DLL with the SSMSLPCN.DLL[/color](8.00.540) from >SQL[color=blue]>Server 2000 Service Pack 2.[/color]- but I cant find any sensible information which describes this tocorrelate! Searching MS for that number (94302) came up with zip.The dll version we are running is 2000.80.760.0, although earlierversions are elsewhere on the server (disk images).Interesting to note that we seem to be able to replicate the 'leakage'of improperly closed handles on this version, but not on the oldserver runningthat dll version 2000.80.194.0. This I understood to have been fixedin sp3.On one failure we caught the following (involving our extended procs):2004-02-15 15:03:31.40 spid58 Error: 0, Severity: 20, State: 02004-02-15 15:03:31.40 spid58 Stored function'xp_Contest_CalculateScores' in the library 'e:sqlxpga_procs.dll'generated an access violation. SQL Server is terminating process 58..2004-02-15 15:04:32.14 spid64 Error: 0, Severity: 20, State: 02004-02-15 15:04:32.14 spid64 Stored function 'xp_XML_GetSubTree'in the library 'e:sqlxpga_procs.dll' generated an access violation.SQL Server is terminating process 64..2004-02-15 15:04:48.48 spid53 Using 'dbghelp.dll' version '4.0.5'*Dump thread - spid = 53, PSS = 0x472d7200, EC = 0x725fc098*Stack Dump being sent to e:sqlMSSQLlogSQLDump0001.txt* ************************************************** ******************************* BEGIN STACK DUMP:* 02/15/04 15:04:48 spid 53This was followed about a minute later by:2004-02-15 15:04:55.75 spid53 Stack Signature for the dump is0x1CC032652004-02-15 15:04:55.75 spid53 SQL Server Assertion: File:<recbase.cpp>, line=1378Failed Assertion = 'm_offBeginVar < m_SizeRec'.2004-02-15 15:04:55.89 spid53 Using 'dbghelp.dll' version '4.0.5'*Stack Dump being sent to e:sqlMSSQLlogSQLDump0002.txt2004-02-15 15:04:56.01 spid53 SqlDumpExceptionHandler: Process 2292generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQLServer is terminating this process.* ************************************************** ******************************* BEGIN STACK DUMP:* 02/15/04 15:04:55 spid 53As a side issue we have a number of 'initialisation of notify failed'notes.Any one have any clue about this?Might the DLL need rolling back?Is sp3a knacked for extended procs?Is there some daft setting I've missed :/Any good events to track in particular?Cheers all!
View 1 Replies
View Related
Jul 20, 2005
I have a DTS package that is importing a fixed length file.After installing SP3a (on PERSONAL & DEVELOPER edition) it will notallow me to assign more than 125 fixed length column positions.After hitting the Finish & OK button it just wipes out the columnsettings.I've reinstalled both Personal & Developer edition. DTS will allowmore than 125 prior to the service pack.
View 2 Replies
View Related
Jul 9, 2007
I got this message from
Backup Exec for Windows Servers Environment Check 1.0 for SBS1
QUOTE
An instance of Microsoft SQL 2000 was found that is not updated to Service Pack 3a.
An instance of Microsoft SQL Server was found that is not updated to the correct service pack. Using this SQL Server instance with Backup Exec may cause errors. To install Backup Exec successfully, upgrade this SQL Server to Service Pack 3a, or select another instance.
Instance: SBSMONITORING, Version: 2000 SP 3a
Instance: SHAREPOINT, Version: 2000 SP 3a
Instance: BKUPEXEC, Version: 2000 SP 3a
Instance: PADMINISTRATOR, Version: 2000 SP 3a
Instance: MICROSOFT##SSEE, Version: 2000
UNQUOTE
My Question is how to upgrade the instance : "MICROSOFT##SSEE, Version: 2000" to SP 3a?
View 7 Replies
View Related
Aug 24, 2006
Hi,
Recently when i try to upgrade my current MSDE 2000 (SP3a) to SP4, the system just keep on failing me. Here is the scenario:
1. Download the MSDE2000 SP4 from microsoft
2. Extract the SP4
3. Run the following command in either the command prompt or via a batch file:
echo off
echo "Start to Upgrade MSDE SP4 ... "
setup.exe /UPGRADESP SQLRUN INSTANCENAME=JSNG SECURITYMODE=SQL UPGRADEUSER=sa UPGRADEPWD=Th3B3st /L*v c:MSDE_Log.log
echo "SP4 Upgrade Process completed!"
4. Once the above batch file was runned, the standard SQL configuration screen (gathering information) will be triggered.
5. However after a while the installation will just stopped.
6. When i checked on the log, i have found out that the failure of installation is due to the system has failed to configure the server. PFB for the last few rows of the verbose log:
=== Logging stopped: 8/22/2006 17:36:49 ===
MSI (c) (90:88) [17:36:49:865]: Note: 1: 1729
MSI (c) (90:88) [17:36:49:865]: Product: Microsoft SQL Server Desktop Engine -- Configuration failed.
MSI (c) (90:88) [17:36:49:865]: Grabbed execution mutex.
MSI (c) (90:88) [17:36:49:865]: Cleaning up uninstalled install packages, if any exist
MSI (c) (90:88) [17:36:49:865]: MainEngineThread is returning 1603
=== Verbose logging stopped: 8/22/2006 17:36:49 ===
7. When i check the MSI Installer Event ID at Microsoft site, it just said that this is the server configuration problem and i cant find any solution.
Any forumers here experience the above before? Mind to share some thoughts?
FYI, my current MSDE configuration is as follow:
- MSDE 2000 Release A (SP3a - 8.00.760)
- Installed Instance = JSNG
Thanks.
regards,
JS
View 1 Replies
View Related
Feb 3, 2004
I am getting an error when installing SP3a of MSDE. I get the error message "The instance name specified is invalid." This is the first SQL database installed, so there is no instance name. I have tried "default" and "MSSQLSERVER" as instance names without success.
your help is appreciated.
View 1 Replies
View Related
Apr 28, 2004
Server : w2k server sp4
Tablet : w2k sp4
Sql Server 2000
A few days ago we upgraded our servers and tablet pc's with sql server sp3a. At the same time we also changed the publisher and it now uses a static filter to reduce the number of records in the tablet database. Since we have done this we have been getting an error message when we try to synchronize via the windows synchronization manager on our tablet pc's. The error message is "mobsync.exe has generated errors and will be closed by windows. You will need to restart the program. I looked up the error message and it is a stack overflow. This does not happen every time but about 50% of the time. We can always sync from within enterprise manager and everything works fine every time.
If any one has any ideas I would greatly appreciate it and thank you in advance.
View 3 Replies
View Related
Jul 20, 2005
Can anyone give me some sugguestions here.Connection is declared at the start of the applicationSet rsFZReport.ActiveConnection = connThen a function repeatly opens recordsets like this -rsFZReport.Open sRS, , adOpenStatic, adLockReadOnly, adCmdText....reporting code etc...If rsFZReport.State > 0 ThenrsFZReport.CloseSet rsFZReport= NothingendifUsing VB Watch debugger, the close and set nothing do NOT release anymemory. It just keeps increasing. The application connects to multipledatabases and many tables, so its uses about 10Mb/minute.(I don't think its of relavance but Form.show uses memory but form.unloaddoesn't release any back)I've installed SP3a and MDAC 2.8 to no avail. Anyone have any ideas or knowwhat I can do?msado27.tlb 2.80.1022.0MSSQL Server SP3a (3 has a memory leak apparently)VB6, SP6Sqlsrv32.dll caused a leak on NT4 SP6, but upgrading it on my win2k SP4server/workstation (they are both and the same) to thisSqlsrv32.dll 2000.85.1022.0doesn't help.Provider=SQLOLEDB;Data Source=theServer;Initial Catalog=theDB;UserID=uid;Password=thepwd;OPTION=3;connect timeout=240;
View 5 Replies
View Related
Jul 29, 2005
Hi,I'm trying to install MSDE Desktop SP3a SQL server on my Windows 2000 Professional Laptop.Every time I try it nearly finishes the installation and then just rollsback.Can anyone help? Is this a known issue?Thanks in advance,Jocky
View 3 Replies
View Related
Jan 12, 2004
Used to work fine:
(windows 200 server, sql server 2000, JDBC driver SP2.)
Two java processes, one sending messages (using jdbc and sql as temp storage), second is receiving and placing on msmq.
After installing SP3a for SQL server, under high load (200 a sec) there are missing messages in msmq.
Installed everything from scratch on separate machine, works fine until SP3a is applied.
Any help is highly appreciated
View 3 Replies
View Related
Dec 8, 2004
my mssql never be used much
and i had a firewall to blocked the port of mssql to internet
but i don't that why tonight the sql server non-stop keep full loading the cpu suddenly until now!
please help me
View 3 Replies
View Related
Jul 23, 2005
Here's my situation:I have an ODBC DSN setup for Timberline Data (An accounting packagethat uses pervasive.sql) on my sql box. I set up a linked server usingthe supplied timberline odbc driver. I have two sql instances setup,the default instance and a named instance. On the default instance,the linked server works great no matter who is logged in using it (allauthentication is NT integrated). However on the named instance onlythe NT account that the MSSqlserver$NAMED service is logged in undercan utilize the linked server. All others get a ODBC error:"error 7399: OLE DB Provider 'MSDASQL' reported an error. AccessDenied. OLE DB error trace [OLE/DB Provider 'MSDASQL'IUnknown::QueryInterface returned 0x80070005: Access Denied.]."Far as i can tell, both instances are setup the same, except that oneis the default and one is a named instance.Why the different results for the default instance vs a named instance.Any ideas?Thanks
View 5 Replies
View Related
Mar 6, 2007
Hi,
We just upgraded 2 sql servers from sql server 2000 sp3a to sql server 2005 build 2153, and merge rep exists between these 2 servers.
However, after sql server upgrade, we had to reinitialize merge replication and now the merge agent is reporting 2 errors
1)
Error messages:
The Merge Agent failed to upgrade triggers, metadata and stored procedures on the Subscriber to versions compatible with SQL Server 2005. Restart synchronization, and if this failure continues to occur reinitialize the subscription. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199403)
Get help: http://help/MSSQL_REPL-2147199403
Invalid column name 'metadata_select_proc'. (Source: MSSQLServer, Error number: 207)
Get help: http://help/207
Invalid column name 'delete_proc'. (Source: MSSQLServer, Error number: 207)
Get help: http://help/207
2)
Command attempted:
{call sp_MSensure_single_instance (N'Merge Agent Name', 4)}
Error messages:
The merge process could not connect to the Publisher 'Server:database'. Check to ensure that the server is running. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147199368)
Get help: http://help/MSSQL_REPL-2147199368
Another merge agent for the subscription(s) is running or the server is working on a previous request by the same agent. (Source: MSSQLServer, Error number: 21036)
Get help: http://help/21036
looking inside the sp_MSensure_single_instance stored procedure, it's trying to obtain an exclusive lock on resource 'Merge Agent Name' but fails and returns -1
this is the stored procedure executed by sp_MSensure_single_instance and @retcode = -1 and thus cannot obtain exclusive lock on resource
EXEC @retcode = sys.sp_getapplock @Resource = 'Merge Agent Name',
@LockMode = 'Exclusive',
@LockOwner = 'Session',
@LockTimeout = 0,
@DbPrincipal = 'MSmerge_PAL_role'
so i think it's failing because for some reason MSmerge_PAL_role database role does not have enough rights to obtain exclusive lock on necessary resources
i've tried many things to fix this, including scripting out and dropping all merge rep, turning off replication db option and reapplying replication create scripts on the server, and even manually deleting the MSmerge_PAL_role database role but still doesn't work
can anyone help?
Thanks
View 9 Replies
View Related
Mar 26, 2007
I have a sql server problem for which the solution is at,
http://support.microsoft.com/kb/889521
The article talks about a hot fix, but there is no link for download the hot fix.
Can anyone have a look and guide me.
Thanks
------------------------
I think, therefore I am - Rene Descartes
View 4 Replies
View Related
May 23, 2007
I am using SETROWCOUNT 10 in my stored procedure. At end of thi sp I use SETROWCOUNT 0.
Will all other sp's that are executing at the same time as the above sp, get affected by the above SETROWCOUNT statement?
View 1 Replies
View Related
Sep 7, 2007
I have a table called Courses with columns "courseCode" "courseName" and "TeacherName"Im passing in a value @prefixText ...I have the following...Select courseModuleCode from courses Where courseModuleCode like @prefixTextwhat I actually want to do is return one list, i.e. one column that will do the same for "courseName" and "TeacherName" aswell based on what the @prefix tag is...so i will end up with one column that may contains some or all of the following courseModuleCode, courseName, TeacherName. Im basically implementing a search on this table and want the users to search by any of the column nameshope this makes sense.
View 6 Replies
View Related
Jun 24, 2004
I am new to DTS.
In ExecuteSQLTask:
want the original sql statement of <<backup database databaeABC to backup_databaseABC with init>> to be
backup database ? to 'backup_' + ? with init
But it looks the parameter could not place a globalVariable to it and parse it with error.
One alternate way probably need to create a proc to pass a parm to it....
Also, how could pass a globalVariable to a FTP task?
thanks
-D
View 4 Replies
View Related
