Sp_addmergereplication And @sync_type='None': Snapshot Is Still Delivered
Mar 20, 2007
Hello,
I'm hoping someone can help me with this. We use t-sql scripts to install merge replication and we have run into a bit of a problem. Sometimes the subscriber already has a database with data and we don't want to apply the snapshot. I thought that if you call sp_addmergereplication with the @sync_type set to 'none' then for that subscriber it will forgo the initial snapshot. It looks like it is still applying it and I'm getting foreign key constraint errors. This occurs on both 2k and 2k5. What's more we could swear that this used to work...
Anyway, any advice would be greatly appreciated. Thanks for reading!
Scott
View 4 Replies
ADVERTISEMENT
Jun 12, 2006
Hi,
I tried to change the subscription property "sync_type" whith a system procedure but I was not able to do it, because sp_changesubscription does not support this property.
Is there any chance to change this property by procedure?
So I decided to drop the subscription and define it new with sp_addsubscription. I chose to set this to "replication support only" as the value "none" is depricated based on the online help. Unfortunately using this value results in an error message "only none or automatic is allowed".
How can I set this value now to "replication support only"?
I need to set the value to "replication support only" as this value leads into the generation of the stored procedures used for insert, update and deletes.
The purpose behind this, to restart a transactional push replication, doing all the initialization stuff by myself and not with reinitialize subscirption. I would like to decide, if I do the initialisation.
Regards
Nobsay
View 5 Replies
View Related
Sep 15, 2006
If I create a subscription with a sync_type set to 'replication support only' is it possible to change that option to 'automatic' down the road without destroying and recreating the
subscription?
-mike
View 4 Replies
View Related
Jun 30, 2006
Hi,
I try to setup a transactional push replication from MS SQL Server 2005 to Sybase ASE 12.5.3. ASE is known to MS SQL Server as a linked server using OleDB.
As table schema and data are valid at subscriber site I don't need a initial snapshot for the replication.
So I do some tests with sync_type (sp_addsubscription). First I tried 'none'. That works fine.
But the documentation says that it is depricated an I should use 'replication support only'.
But with this syn_type replication stops because is sends the following commands to the subscriber:
--
-- Transactional replication custom procedures for publication 'kunktable_pub' from database 'kunktest2':
--
----
---- Replication custom procedures will not be scripted for article 'kunktable' because the auto-generate custom procedures schema option is not enabled.
----
IF (@@microsoftversion >= 0x09000000) BEGIN EXEC sys.sp_MSrepl_setNFR @schema = N'dbo', @object_name = N'kunktable' END
Of cause Sybase ASE throws an error 137 'Must declare variable '@@microsoftversion' because it has no system variable @@microsoftversion. Furthermore a procedure sys.sp_MSrepl_setNFR is not known at ASE site.
So it seems, that sync_type ''replication support only' only works for MS subscriber but not for ODBC or OLEDB based subscriber like SYBASE.
Question:
Do I miss something ?
Is this a bug ?
Which sync_type should I use ?
Regards
Wolfgang
View 7 Replies
View Related
Jul 28, 2005
When I send message from Server1 to Server2,I found the error "This message could not be delivered because it is duplicate" in SQLProfiler on Target, why message can be duplicate ? who can help me?
View 8 Replies
View Related
Nov 2, 2007
Hi
I tried to deliver a report using data driven subscriptions option. But It does not process. In report manager, under status bar, it indicates 0 processing of 12 total; 0 errors.
Although there is no error I can not see any reports on the shared folder.
But when I go to Mngt Studio and select the specific report and try to refresh that reports subscription I get the following error.
==================================
invalid node. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.XPathExpression.Load(AstNode ast)
at Microsoft.SqlServer.Management.Smo.XPathExpression.Compile(String strXPathExpression)
at Microsoft.SqlServer.Management.Smo.Urn.get_XPathExpression()
at Microsoft.SqlServer.Management.Smo.Urn.Compare(Urn u1, Urn u2, CompareOptions[] compInfoList, CultureInfo cultureInfo)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.RebuildItem(INavigableItem item, Boolean applyItemParentFilter)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.RequeryProperties()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.Refresh(Boolean autoRefresh)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.Refresh()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ExplorerHierarchyNode.Refresh()
Does any body know how to fix this ?
Thanks
View 3 Replies
View Related
Sep 7, 2004
Hi,
after i try to build the web application "Web Development - Data Entry Form" i get the following error message. I already change the variable username to system which is defined in Machine.Config.
The Error messega is like following:
SQL Server does not exist or access denied.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.
Thanks,
View 1 Replies
View Related
Nov 5, 2007
Hi All,
I'm delivering some reports through data driven to a shared folder in another computer in my network. In report manager, under status, it shows the following message.
Processing: 10 processed of 12 total; 0 errors.
When I chek in the folder, I can see sometimes only 6 reports. I rescheduled and run it again. Then I could see only 10 out of 12 reports.
I opened the Management Studio and tried to refreshed the report subscription under subscription. Then I got the following error message.
"
nvalid node. (Microsoft.SqlServer.SmoEnum)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
Program Location:
at Microsoft.SqlServer.Management.Smo.XPathExpression.Load(AstNode ast)
at Microsoft.SqlServer.Management.Smo.XPathExpression.Compile(String strXPathExpression)
at Microsoft.SqlServer.Management.Smo.Urn.get_XPathExpression()
at Microsoft.SqlServer.Management.Smo.Urn.Compare(Urn u1, Urn u2, CompareOptions[] compInfoList, CultureInfo cultureInfo)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.RebuildItem(INavigableItem item, Boolean applyItemParentFilter)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.RequeryProperties()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.Refresh(Boolean autoRefresh)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.Refresh()
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ExplorerHierarchyNode.Refresh()
Even If see error log file, I can not see any file there. This is actually a file of the previous run.
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.2047.00</Product>
<Locale>en-US</Locale>
<TimeZone>Pacific Standard Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerService__11_05_2007_11_29_11.log</Path>
<SystemName>DEV02</SystemName>
<OSName>Microsoft Windows NT 5.1.2600 Service Pack 2</OSName>
<OSVersion>5.1.2600.131072</OSVersion>
</Header>
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
ReportingServicesService!configmanager!4!11/5/2007-11:29:12:: w WARN: WebServiceAccount is not specified in the config file. Using default: DEV02ASPNET
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
ReportingServicesService!library!4!11/5/2007-11:29:12:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!library!8!11/5/2007-11:29:20:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. ---> System.Data.SqlClient.SqlException: Cannot open database "ReportServer" requested by the login. The login failed.
Login failed for user 'ZOPAratnayake'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.ReportingServices.Library.ConnectionManager.OpenConnection()
--- End of inner exception stack trace ---
ReportingServicesService!library!8!11/5/2007-11:29:21:: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. ---> System.Data.SqlClient.SqlException: Cannot open database "ReportServer" requested by the login. The login failed.
Login failed for user 'ZOPAratnayake'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
ReportingServicesService!library!4!11/05/2007-11:43:03:: Status: The file "Members - Awaiting Approval.xls" has been saved to the "\derbyReports" file share.
ReportingServicesService!notification!4!11/05/2007-11:43:03:: Notification 77fc9843-80f6-4392-9c26-3a84b087dafb completed. Success: True, Status: The file "Members - Awaiting Approval.xls" has been saved to the "\derbyReports" file share., DeliveryExtension: Report Server FileShare, Report: Members - Awaiting Approval, Attempt 0
ReportingServicesService!dbpolling!4!11/05/2007-11:43:03:: NotificationPolling finished processing item 77fc9843-80f6-4392-9c26-3a84b087dafb
ReportingServicesService!library!4!11/5/2007-11:43:03:: i INFO: Initializing SqlStreamingBufferSize to default value of '64640' Bytes because it was not specified in Server system properties.
ReportingServicesService!library!4!11/5/2007-11:43:03:: i INFO: Initializing SnapshotCompression to 'SQL' as specified in Server system properties.
ReportingServicesService!library!d!11/05/2007-11:43:03:: Data Driven Notification for activation id 668b2d9c-d5ea-46e9-8efd-e2824e9a8c64 was saved.
ReportingServicesService!library!d!11/05/2007-11:43:03:: Status: The file "Members - Awaiting Approval.xls" has been saved to the "\derbyReports" file share.
ReportingServicesService!notification!d!11/05/2007-11:43:03:: Notification 5fa50ecb-1b0f-4e40-86c8-4c4700c4b820 completed. Success: True, Status: The file "Members - Awaiting Approval.xls" has been saved to the "\derbyReports" file share., DeliveryExtension: Report Server FileShare, Report: Members - Awaiting Approval, Attempt 0
ReportingServicesService!dbpolling!d!11/05/2007-11:43:03:: NotificationPolling finished processing item 5fa50ecb-1b0f-
ReportingServicesService!library!d!11/05/2007-11:43:03:: Data Driven Notification for activation id 668b2d9c-d5ea-46e9-8efd-e2824e9a8c64 was saved.
ReportingServicesService!library!d!11/05/2007-11:43:03:: Status: The file "Members - Awaiting Approval_1.xls" has been saved to the "\derbyReports" file share.
ReportingServicesService!notification!d!11/05/2007-11:43:03:: Notification 3a282979-9cab-44fd-b4e8-a083558c494e completed. Success: True, Status: The file "Members - Awaiting Approval_1.xls" has been saved to the "\derbyReports" file share., DeliveryExtension: Report Server FileShare, Report: Members - Awaiting Approval, Attempt 0
ReportingServicesService!dbpolling!d!11/05/2007-11:43:03:: NotificationPolling finished processing item 3a282979-9cab-44fd-b4e8-a083558c494e
ReportingServicesService!subscription!4!11/05/2007-11:43:03:: System.IO.IOException: The process cannot access the file '\derbyReportsMembers - Awaiting Approval_1.xls' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData data)
ReportingServicesService!subscription!4!11/05/2007-11:43:03:: Error writing file Members - Awaiting Approval_1.xls to path \derbyReports
ReportingServicesService!library!4!11/05/2007-11:43:03:: Data Driven Notification for activation id 668b2d9c-d5ea-46e9-8efd-e2824e9a8c64 was saved.
ReportingServicesService!library!4!11/05/2007-11:43:03:: Status: Failure writing file Members - Awaiting Approval_1.xls : The process cannot access the file '\derbyReportsMembers - Awaiting Approval_1.xls' because it is being used by another process.
ReportingServicesService!dbpolling!4!11/05/2007-11:43:03:: NotificationPolling finished processing item 09e28175-ce44-41cd-ab55-56199a58885f
ReportingServicesService!dbpolling!d!11/5/2007-11:43:03:: NotificationPolling processing item 41cfd72e-bda0-4e8f-87dd-a22789eb340f
ReportingServicesService!dbpolling!c!11/5/2007-11:43:03:: NotificationPolling processing 2 more items. 2 Total items in internal queue.
ReportingServicesService!dbpolling!4!11/5/2007-11:43:03:: NotificationPolling processing item 34e19ce1-b298-48e6-a2fc-b7637765968c
ReportingServicesService!subscription!11!11/05/2007-13:18:10:: Auto increment filename = Members - Awaiting Approval_5.xls
ReportingServicesService!subscription!11!11/05/2007-13:18:10:: System.IO.IOException: The process cannot access the file '\derbyReportsMembers - Awaiting Approval_5.xls' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData data)
ReportingServicesService!subscription!11!11/05/2007-13:26:15:: Auto increment filename = Members - Awaiting Approval_11.xls
ReportingServicesService!library!11!11/05/2007-13:26:15:: Data Driven Notification for activation id 7bd68b9c-855f-4f2a-9482-43ac5f7c9589 was saved.
ReportingServicesService!library!11!11/05/2007-13:26:15:: Status: The file "Members - Awaiting Approval_11.xls" has been saved to the "\derbyReports" file share.
ReportingServicesService!notification!11!11/05/2007-13:26:15:: Notification 76aedee6-e860-4c60-aebc-2c3aeb854bed completed. Success: True, Status: The file "Members - Awaiting Approval_11.xls" has been saved to the "\derbyReports" file share., DeliveryExtension: Report Server FileShare, Report: Members - Awaiting Approval, Attempt 1
ReportingServicesService!dbpolling!11!11/05/2007-13:26:15:: NotificationPolling finished processing item 76aedee6-e860-4c60-aebc-2c3aeb854bed
ReportingServicesService!library!11!11/5/2007-13:29:12:: i INFO: Cleaned 0 batch records, 0 policies, 12 sessions, 0 cache entries, 12 snapshots, 36 chunks, 0 running jobs, 0 persisted streams
Here I did not post the whole error log, because its too long.
Does any one know why I can not deliver all the reports?
View 2 Replies
View Related
Jun 20, 2007
Hi
I seem to have a strange problem when applying a snapshot when the tables in the publication have been updated while the snapshot was being generated.
Say for example there is a table called RMAReplacedItem in the publication. When the snapshot starts being applied to the subscriber, a stored procedure called sp_MSins_RMAReplacedItem_msrepl_css gets created that handles an insert if the row already exists (ie it updates the row rather than inserting it). However, after all the data has been loaded into the tables, instead of calling this procedure, it tries to call one called sp_MSins_RMAReplacedIte_msrepl_cssm - it takes the last letter of the table name and adds it to the end of the procedure name.
The worst part is that this causes the application of the snapshot to fail, but it doesnt report what the error is, and instead it just tries applying the snapshot again. The only way i have managed to find which call is failing is to run profiler against the subscriber while the snapshot is being applied and see what errors.
I have run sp_broswereplcmds and the data in there is what is applied to the subscriber - ie the wrong procedure name.
All the servers involved are running sql 2005 service pack 2. The publisher and subscriber were both upgraded from sql 2000, but the distribution server is a fresh install of sql 2005.
View 1 Replies
View Related
Oct 26, 2006
Hi all,
[Reporting Services 2005]
I have reports delivered by email subscription. My "date from - to" parameters are set to "default" as "=Today()" and "=Now()". Report is delivered fine but I have problems with "link" to that report (attached to email). RS don't add my default parameter values to this link so every time user click this link, report is generated with new "date from" and "date to" and I want to generate exact the same report (same parameters) as in the email.
Is there a way to send default parameter values as static values in email delivered report link ?
Thanks
Maciej
View 4 Replies
View Related
Jun 14, 2007
I am running SQL Server 2005 Reporting Services. I created a subscription delivered by "Report Server File Share" and the UNC path points to a share on a Netware server. I get the following error when the schedule runs:
Failure writing file Completed.pdf : The network path was not found
The UNC path is \rmh5vol1deptimsoperhiscommon.
I can create the same subscription, but have it write to a Windows file share and everything works fine.
Does SQL Server 2005 Reporting Services support writing to a Netware share?
View 3 Replies
View Related
Apr 17, 2007
Hi,
I am using service broker in between two database servers. following is the way i am sending and receiving messages
Send
BEGIN TRAN
BEGIN DIALOG CONVERSATION @handle
FROM SERVICE @SendService
TO SERVICE @ReceiveService
ON CONTRACT @Contract
WITH LIFETIME = @lifetime;
SEND ON CONVERSATION @handle
MESSAGE TYPE @xmlMessageType(@xmlMessage);
COMMIT
Receive
BEGIN TRAN;
RECEIVE TOP(1) @xmlMessage = message_body,
@handle = conversation_handle,
@message_type = message_type_name
FROM TransactionQueue;
----------------------------------------------------------------------------------------------------
-- Check to make sure a message was returned to process. In theory this should never happen.
----------------------------------------------------------------------------------------------------
IF @@rowcount = 1
BEGIN
IF @message_type = 'http://schemas.microsoft.com/SQL/ServiceBroker/EndDialog'
BEGIN
END CONVERSATION @handle;
COMMIT
RETURN 0
END
IF @message_type = N'http://schemas.microsoft.com/SQL/ServiceBroker/Error'
BEGIN
RAISERROR(N'Received error %s from service [Target]', 10, 1)
END CONVERSATION @handle;
COMMIT
RETURN 0
END
SET @sql = 'EXEC '+@message_processor_name+' @xml'
BEGIN TRAN
EXEC sp_executesql @sql, N'@xml XML', @xml=@xmlMessage
COMMIT TRAN
END CONVERSATION @handle;
END
COMMIT
I see Messages are delivered to the target every thing working fine other than following errors which i am seeing in profiler.
1) "This message could not be delivered because the conversation endpoint has already been closed." I see this error on initiator end. Is it like ending conversation on initiator end when i get "EndDialog" send an acknowledgement, which cannot be recieved by target as it has already ended conversation.
2) "An error occurred while receiving data: '64(The specified network name is no longer available.)'." I don't have much idea about the reason for this error. But in profiler i see value for GUID is different for this error and the real message.
Let me know if you need any other information
View 4 Replies
View Related
Oct 12, 2007
Hi,
I already had a thread for same problem but didn't recieved any response in last 4-5 months so I created a new thread for this
I am using service broker in between two database servers. following is the way i am sending and receiving messages
Send
BEGIN TRAN
BEGIN DIALOG CONVERSATION @handle
FROM SERVICE @SendService
TO SERVICE @ReceiveService
ON CONTRACT @Contract
WITH LIFETIME = @lifetime;
SEND ON CONVERSATION @handle
MESSAGE TYPE @xmlMessageType(@xmlMessage);
COMMIT
Receive
BEGIN TRAN;
RECEIVE TOP(1) @xmlMessage = message_body,
@handle = conversation_handle,
@message_type = message_type_name
FROM TransactionQueue;
----------------------------------------------------------------------------------------------------
-- Check to make sure a message was returned to process. In theory this should never happen.
----------------------------------------------------------------------------------------------------
IF @@rowcount = 1
BEGIN
IF @message_type = 'http://schemas.microsoft.com/SQL/ServiceBroker/EndDialog'
BEGIN
END CONVERSATION @handle;
COMMIT
RETURN 0
END
IF @message_type = N'http://schemas.microsoft.com/SQL/ServiceBroker/Error'
BEGIN
RAISERROR(N'Received error %s from service [Target]', 10, 1)
END CONVERSATION @handle;
COMMIT
RETURN 0
END
SET @sql = 'EXEC '+@message_processor_name+' @xml'
BEGIN TRAN
EXEC sp_executesql @sql, N'@xml XML', @xml=@xmlMessage
COMMIT TRAN
END CONVERSATION @handle;
END
COMMIT
I see Messages are delivered to the target every thing working fine other than following errors which i am seeing in profiler.
1) "This message could not be delivered because the conversation endpoint has already been closed." I see this error on initiator end. Is it like ending conversation on initiator end when i get "EndDialog" send an acknowledgement, which cannot be recieved by target as it has already ended conversation.
2) "An error occurred while receiving data: '64(The specified network name is no longer available.)'." I don't have much idea about the reason for this error. But in profiler i see value for GUID is different for this error and the real message.
Let me know if you need any other information
View 2 Replies
View Related
Aug 8, 2007
I run SB between 2 SQL servers. In profiler on an initiator side I see next error: 'This message could not be delivered because its message timestamp has expired or is invalid'. For the conversation we use best practice, i.e. target closes a conversation. Target side succeed to close conversation, but initiator still stay in DO (disconnect_outbound).
What is a reasone for the error? What to do?
View 5 Replies
View Related
Aug 8, 2007
I see in profiler this error: "This message could not be delivered because its message timestamp has expired or is invalid"
What is a reason for error?
View 1 Replies
View Related
Apr 17, 2007
What is a snapshot from replication point of view.
------------------------
I think, therefore I am - Rene Descartes
View 6 Replies
View Related
Aug 28, 2006
Dear friends
I am a new fellow to replication.What is the problem I am getting is I am not able to create snapShot.Whenever I start Snapshot Agent it is going for half an hour and it will stuck in the case of one view saying like that 'failed to process bulk copy of data from dbo.syncobj_03x666*'.If I am publishing tables only then also I am getting same error.This view created by system.In my case publiher only working as a distributor.I created a SQL username which have access in subscriber & Publisher.Preferably I will be happy if someone suggest what and all are the primary criterias we have to keep in mind while doing Replication
Thanks in Advance
Filson
View 5 Replies
View Related
Apr 9, 2002
I get the following error message in the job history for
synchronization between two SQL 7 machines across the
network.
The process could not read file 'acct.sch' due to OS error
1231.
Is there something to fix this? It has been running fine
for almost 2 years and suddenly quit. There is a firewall
on both sides, if that helps.
TIA,
Cami
View 3 Replies
View Related
May 7, 2002
The database will grow to 40GB in a short while and I intend to schedule replication every hour. Can this not be done using snapshot replication??
Subject:
From:
Date: Snapshot Replication - Help!! (reply)
MAk (mak_999@yahoo.com)
5/7/2002 12:02:08 PM
Create jobs to copy database and restore database in destination servers
------------
Robert at 5/7/2002 11:00:30 AM
Yes and I would rather not use dts to accomplish this task.
------------
Ray Miao at 5/7/2002 10:02:15 AM
Do you have direct network connection to remote server? Did you try dts?
------------
Robert at 5/7/2002 9:08:06 AM
I've been trying to replicate a database to an off site server using snapshot replication. It is scheduled to run every hour but I've noticed when data is changed at the source it never gets replicated to the destination. Does anyone know why?? I can't use transactional replication beause not all the tables have primary keys and they can't be added due to code. Some tables have id colunms and have been created with the Not for Replication option on the subscriber. Any help will be appreciated.
Thanks
Robert
View 1 Replies
View Related
Aug 27, 2001
I can set up snapshot replication for those tables without foreign key constraints. But if there are foreign keys in the table, there will be error
message indicating that this object can not be dropped because it is referenced by ....
Do you have any remedy for that? Thanks
View 1 Replies
View Related
Dec 29, 2000
Hi,
I've problem in replicating data thru SNAPSHOT as I've the tables with Foreign Keys at subscriber end. The Truncate table is not working because these tables
were referenced by a FK. Even for recreating table during snapshot is also same problem. Any suggestions?
Thanks
TT
View 1 Replies
View Related
Dec 28, 2000
2 questions:
1) In snapshot replication, can the subsciber send info back to the publisher (even in a manual process)
2) In snapshot replication, do we need a distributor set up between the publisher and subscriber if there will only be a single subscriber, or can we write directly to it?
Thanks so much for any and all help!
View 1 Replies
View Related
Jan 11, 2001
Hi,
I am replicating all tables in the DB. the tables have PKs,FKs and identity columns. While truncating the data from the tables in subscriber getting
the constraint errors. Please suggest how to get rid of this error.
Thanks
Sam
View 1 Replies
View Related
Jan 11, 2001
Hi,
I am replicating all tables in the DB. the tables have PKs,FKs and identity columns. While truncating the data from the tables in subscriber getting
the constraint errors. Please suggest how to get rid of this error.
Thanks
Sam
View 1 Replies
View Related
Oct 17, 2002
Hi everybody,
We have merge replication between two servers with Sql Server 2000 Service Pack 2, and the Merge agent display the follow message :
The snapshot for this publication has become obsolete. The snapshot agent needs to be run again before the subscription can be synchronized.
But i have changes at the suscriber, How can I do to Merge the last changes if the merge agentes is stopped.
I appreciate any help.
thanks
View 1 Replies
View Related
Jan 13, 2003
Hi Guys,
We have a production server in East Coast (SQL Server 2000 SP2 - Database size is around 30 Gig). We have a reporting server is the West Coast. We need to replicate (transactional replication every one hour) from East coast to West coast. Is there any way that I can take a backup and restore upto the last transaction backup and then start replication agent on the production (by saying schema and data already exist). Basically we don't wan't to snapshot using FTP or bcp through WAN because it is going to be very slow.
If this is possible, will there be any validation problem.
Please help.
Thanks,
Anu
View 3 Replies
View Related
Apr 13, 2006
Suppose i want to replicate data from server A to server B
I am using snaphot replication.I did the snapshot replication for the first time
and server B got a snapshot of server A.
Next time i run snapshot i want the incremental data to be replicated and not all..Is this possible in snapshot replication? If not which type of replication should i use?
View 2 Replies
View Related
May 16, 2008
We have a training server and I've had a request that after each training session, we have the ability to quickly roll the training server back to its previous state so that the next group of people can be trained with the same examples.
Doing a restore requires that the maintenance (defrag, warm cache, etc..) also runs after that before the server performs fast enough.
So I was thinking of snapshots as an alternative. When you roll back to a snapshot, does that invalidate what's in the cache or have any adverse effect on query plans, stats, or indexes?
View 1 Replies
View Related
Jun 5, 2008
Hello everyone
I am learning about snapshots at the moment and i dont know how to incorporate the filegroup within the sytax
at the moment i use
create snapshot snapshotName
on (
Name='Filename_data',
Filename=@'osFIlePath')
as snapshot of DatabaseName
i get an error for filegroup, can someone tell me what im doing wrong please.
Regards
Rob Dineen
View 13 Replies
View Related
Jan 23, 2008
hello everyone
i am going through the self kit book to get my MCTS and i am stuck on
one of the practices. Creating a snapshot
I typed in
create database snapshottest
on
(
Name= 'Adventureworks_data',
Filename = 'C:program filesMicrosoft SQL servermssql.1mssqldatasnapshottest.ds')
as snapshot of adventureworks
i get the error message
msg 5127 level 16 state 1 line 1
all files must be specified for database snapshot creation
missing file "AdventureworksFT_data".
i have not stated AdventureworksFT_data
i stated Adventureworks_data
why is it asking for AdventureworksFT_data
can someone please tell me if the syntax is wrong or is there something missing
Regards
Rob
View 7 Replies
View Related
Jan 31, 2008
Hi...
Why is it that I encounter an error during execution of database snapshot i SQL Server 2005 Standard Edition. It says that database snapshot is not supported under standard versin. Is this true?
Thanks.
View 2 Replies
View Related
Jul 23, 2005
Hi All,I have set up a snapshot replication, and schedule it to run everynight. The snapshot run successfully, and data get replicated to thesubscribed server. However, data do not get transfer as the second dayand there after. I check the job history, the job (distribution) runsuccessfully. I start the snapshot agent again, then data gettransferred. I can schedule the snapshot agent to run every night, butthis is just not the way it's supposed to be. Is there anyone out therecan give me some help. Thanks.
View 1 Replies
View Related
Sep 3, 2007
HiI am relatively new to databases. I would like to be able to run aquery that returns the t_no, b_no, status and cpu for the latestrecord for each unique combination of (t_no, b_no and cpu) before agiven point in time (say @snap_time). d_no is an autoincrementingprimary key.d_no t_no b_no status cpu update_time1 500 3 0 1 3:012 501 3 1 1 3:023 501 3 0 1 3:034 502 3 1 1 3:045 503 3 1 1 3:056 500 3 1 1 3:10In this example, if @snap_time = '3:15' the query would return the(t_no, b_no, status, cpu) for records 3, 4, 5, 6 because 1 issuperceded by 6 (which has the same t_no, b_no, cpu combination butoccurs later) and 2 is superceded by 3.If @snap_time = '3:03', the query would return records 1 and 3 becauserecords 4, 5 and 6 were created at a later update_time and record 3supercedes record 2.The query:SELECT MAX(update_time), t_no, b_no, cpu, statusFROM my_tableWHERE (time <= @snapTime)GROUP BY t_no, b_no, cpureturns an error:Column 'dbo.my_table.status' is invalid in the select list because itis not contained in either an aggregate function or the GROUP BYclause.And even if this did work, ideally I would like to suppress theupdate_time field from appearing.How could I do such a query and is it even possible without usingsomething more sophisticated than a select query?Many thanksJon
View 1 Replies
View Related
