Sp_update_jobstep And Setting To A Particular Package?

Mar 28, 2007





I've used t-sql code like this to dynamically create jobs that perform specific tsql commands, including calling stored procedures



However, I'd like to create a dynamic job that runs a step that's running an SSIS package.





EXEC msdb..sp_add_job @SQLjobname

EXEC msdb..sp_add_jobserver @job_name =@SQLjobname , @server_name = @jobserver

EXEC msdb..sp_add_jobstep @job_name = @SQLjobname, @step_name = 'CPM.command'

EXEC msdb..sp_update_jobstep @job_name = @SQLjobname, @step_id = 1, @database_name = @db,@command = @commandin



I was wondering, is it possible to dynamically (in code) rather than setting the command that a job step is performing, to instruct the job step to perform a type Package? I noticed the command line setting for the step looks like this when it's a package:



/SQL "mypackage" /SERVER AMMIA01DEV04 /MAXCONCURRENT " -1 " /CHECKPOINTING OFF



However, if change the step type, the step fails. I don't see a type option on sp_update_jobstep and wonder is that subsystem?



As another option, I could instruct the job step to run the package through cmd shell but then wonder if that will run asynchronosly and if errors will be retained in the job. I'm not favoring that option.

View 1 Replies


ADVERTISEMENT

Setting Connection String For The Package To Execute From Another Package

Jun 29, 2006

I am using execute pacakge task to execute another package . I am giving the Connection string for the package to execute. It works fine in my development machine but when i try to run in another server after i deployed it. It looks for the datasource path of the DTSX file in the same location.

how do i set the path according to each server where the dtsx file is stored. or any other method of storing it like connection string.

if i store it in theparent package variable where should i point to...

thanks

aa

View 1 Replies View Related

Problem Setting Package Variables In SSIS Package

Sep 8, 2006

Hi,

I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.

I have some package variables which need to be set in the code.

Previously I did it as follows:

Set the package variables in the code. For example:

pkgFile.Variables["User::DestinationServerName"].Value = <myvalue>

Deploy the package as follows:

applnObj.SaveToSqlServer(pkgFile, null,
destinationServer, null, null);

Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.


Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:

Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.

Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.

I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?

Thanks,
Sandhya

View 8 Replies View Related

Setting DTS Global Var From Another DTS Package

Oct 25, 1999

How can I set a global var in another DTS package from inside the one I'm excuting. An example would be that I have in package #1 an ID that gets assigned, and it executes package #2 which needs the ID from the previous package.

Thanks,

Todd

View 1 Replies View Related

Setting Package Variable Using Dtexec

Feb 15, 2008

Hi,

If this is the syntax to set a property in a package using dtexec:

/set PackageMyForEachLoopMyDataFlow.Disable;False

What is the syntax for setting a global variable in the package?

Thanks

View 1 Replies View Related

Setting BufferTempStoragePath From Package Variable

Jan 8, 2008

I'm in the process of creating a series of packages to do the ETL for a datawarehouse. As such, I've got quite a few DataFlow tasks scattered through them.

The problem I'm coming across is where the disk that the temp files (created during the processing) are put on is short of space (when compared to some of the data sets I'm copying around and noting that it's the System disk, not the "Data Drive").

To get around this, I found number of article scattered around that suggested using the BufferTempStoragePath property of the DataFlow tasks to redirect the temp files to somewhere else. This works fine for the tasks that I hard-code the new directory.

Noting the number of these tasks that I want to redirect, and also that the Dev environment will be different to the Production environment (and I have no control over the drive letters, paths, etc, in Prod), it was suggested that a package variable be created, assigned to the property and then said variable could be exposed via the Package Configuration file.

That's great as far as it goes, but I just cannot, for some reason, make it work.

The xml in the config file is:

<Configuration ConfiguredType="Property" Path="Package.Variables[::BufferTempStoragePathValue].Properties[Value]" ValueType="String">
<ConfiguredValue>D:Temp</ConfiguredValue>
</Configuration>

The property in the DataFlow task is then set to: @BufferTempStoragePathValue.


When the package is executed, it logs the error message "The buffer manager cannot create a temporary storage file on any path in the BufferTempStoragePath property. There is an incorrect file name or no permission."

My question for the group is two-fold: 1) what am I doing wrong in the setup of the property/variable, and 2) what are the security permissions that are required for the (new) folder.

It's got to be something obvious, I just can't see what!

Many thanks for your assistance.

Cheers,
Mike

View 6 Replies View Related

Understanding Package Configurations And Setting Variables

Feb 26, 2008

I am trying to understand the relationship of setting package configurations and setting variable values during job scheduling. I understand that I can select variables that I want to manipulate at run time using package configurations. I understand that the configuration file is an xml file that the job can be told to access at run time. Here are my questions:

1. Once I create a configuration file, do I physically modify the file to change the variable that is input at runtime?
2. Do I have to select the config file and then change the value using the Set values tab?
3. What is the relationship between the config file and the set values tab?

4. When creating a package configuration, when would you use the options other than XML configuration file?

View 8 Replies View Related

Setting Child Package Inner Variables Dynamically

Oct 19, 2006

Hi,

I am trying to execute a DTS on sql server 2000 using the "Execute DTS 2000 Package Task".

I can see the inner variables and when I set the values everything works fine.

Now I want to pass the values dynamically. How can I achieve this?

Many thanks

View 9 Replies View Related

Problem Setting Package Properties From Dtexecui

May 17, 2007

I want to input a parameter to my package. I have a variable, and I tried changing its value from DTExecUI.

I did everything as mentioned in http://blogs.conchango.com/jamiethomson/archive/2007/03/13/SSIS_3A00_-Property-Paths-syntax.aspx but I still get an error -

Could not set "Package.Variables[User::var_input_step_Name].Properties[Value]" value to "RAW".



The variable was originally read from a XML config file. I stored the package to MSDB. I then ran dtexecui, selected my msdb package, and in Set Values, I entered property path and value. I also tried removing the "", and I even deleted the XML configuration. Still the same error.

What am I doing wrong? Any Package Settings to make?

TIA

Kar

View 4 Replies View Related

Execute Package Task: Setting Child Variables

Feb 13, 2007

Hi,
Let's say I have a package taking as parameter "InvoiceID". I want to execute this package as a child in another package. The parent package gets the list of invoices to produce and calls the child package for each entry of the list.

How do I pass the InvoiceID to the child? I know I can use the parent's variables from the child but I don't want the child package to be dependant on the parent package. For example, I might want to execute the "child" package as a stand-alone in development (providing it with a predefined InvoiceID). I might also want to call the same child package from another parent package with other variable names.

What I would like to do is "push" the value instead of "pulling" it. I know it's possible using the command line and the /SET option (ex.: /SET Package.Variables[InvoiceID].Value;' 184084)... Is it possible using the Execute Package Task?

Thanks

View 4 Replies View Related

Some Info On Setting Row Delimiter Values In Package Configurations

May 16, 2006

I just spent the past 3 or 4 hours trying to figure out how i could represent carriage returns and line feeds properly in package configuration variables that an SSIS package can properly handle, so i figured I'd post my results in case anyone else has struggled with this.

Initially, I thought I would be able to just represent the delimiter as the same value that you can pick from in the flat file connection manager dialog, i.e. {CR}{LF}, {CR}, {LF}, etc. nope.

Then I decided to try actually storing the characters as hex, i.e. _x000D__x000A_ for {CR}{LF}. nope.

After scanning the .dtsx packages for a while, I finally found something that works: you have to represent the curly brackets in hex, and you can simply use the CR or LF string literals. so if you wanted to have a row delimiter that was {CR}{LF}, you would need to set your variable to: _x007B_CR_x007D__x007B_LF_x007D_

Hope this saves some people the pain I had to endure.

View 1 Replies View Related

Programmatically Setting Package Variables In Job Step Command Line

Mar 1, 2007

We are trying to start a server job running an SSIS package and supply some parameters to the package when we start the job using SMO.

What we have now is this:

string cmdLine = job.JobSteps[0].Command;

cmdLine += @" /SET PackageGetGroupRatingYear_Id.Variables[User::RatingId].Value;1";

cmdLine += @" /SET PackageGetGroupRatingYear_Id.Variables[User::GroupId].Value;1";

cmdLine += " /SET \Package.Variables[User::period].Value;"" + periodEndDate + """;

job.JobSteps[0].Command = cmdLine;

job.Start();

It appears that when the job is run, the modified command line is not used.

What is needed to supply runtime parameters to a job step when starting the job via SMO?

Thanks,

View 3 Replies View Related

Integration Services :: Cannot See SSIS Package In Drop Down List When Setting Up Job

May 26, 2015

I have an SSIS package created on SQL Server 2005. I have moved this to a SQL Server 2008 R2 server and amended the package on this new server to point at the correct databases.

The package runs manually. However, I cannot see the package when trying to schedule a job. The dropdown list does not contain the package.

I imported the package by right clicking on MSDB and selecting the package from the file system. The package then appears under this folder (SQL Server Integration Services). I then create the SQL job but cannot see the package I just created.

View 2 Replies View Related

Execute DTS 2000 Package Task: Invalid GUID When Setting PackageId Via Expression

May 24, 2007

Hi there,

I'm creating an SSIS package that will execute legacy dts packages. The package to be executed is decided at runtime using a sql query task.

Executing a dts package statically works fine, but when I try to set the details of the dts to be run via expressions, I get the error below.

To make it dynamic, I created a variable of type string, and put the package name in here. I also have a string variable for the packageid. Then I set up an expression on the Execute DTS 2000 Package Task that sets the PackageName & PackageID property to this variable.

The PackageId is a string variable I've retrieved using:

select top 1 name,
cast(id AS varchar(50)) id,
cast(versionid AS varchar(50)) versionid
from sysdtspackages
where name = @PackageName
order by createdate desc

When I use the task to set the package id it works find (by selecting a dts, then changing the name), but when I try to provide the package id I get this message:


Error: 0x0 at Execute DTS 2000 Package Task: System.Runtime.InteropServices.COMException (0x8004040E): Invalid GUID specified.
at DTS.PackageClass.LoadFromSQLServer(String ServerName, String ServerUserName, String ServerPassword, DTSSQLServerStorageFlags Flags, String PackagePassword, String PackageGuid, String PackageVersionGuid, String PackageName, Object& pVarPersistStgOfHost)
at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.PackageUtils.LoadDTS8Package(String pkgSrc, String sourceUser, String sourcePwd, Int32 srcType, Boolean bUseTrustedConnection, String packageName, String packagePassword, String packageID, String packageVersionGUID)
at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.LoadPackage()
at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread()
Task failed: Execute DTS 2000 Package Task

but the method signature specifies String PackageGuid, and it is a string..

any ideas??

i tried casting the variable like so:

(DT_GUID) @[User:TSPkgId], as the versionid is a uniqueidentifier on sysdtspackages.. It didn't like that at all (can't cast from type DT_WSTR to DT_GUID error code 0xC00470C2)

View 8 Replies View Related

SQL Server 2008 :: Setting To Not Rollback A Failed SSIS Package That Inserts 100 Million Records?

May 20, 2015

I have a pretty simple SSIS package that fast loads a 100 million record table into a SQL Server 2008 table on a daily basis. This normally runs fine and completes in about 1 hour. As this is perhaps one of our largest running SSIS packages, about once every 2-3 weeks this SSIS will fail/drop connection. Once it fails, the large number of records will start rolling back. This rollback process can take 1+ hours so I cannot even restart the failed SSIS package immediately. This is a problem.

I am looking for a solution or option so I do not have to wait on that rollback to restart this particular, long running SSIS package. Is there an option/setting to leave the partial data set committed and not rollback? Then I could just restart the SSIS package immediately or set it the SSIS to auto-restart 1 time on failure. The first step in the SSIS does a truncate of the destination table.

View 2 Replies View Related

Unexpected Behavior When Setting A Script Task Breakpoint In Package W/ Multiple Script Tasks

Apr 16, 2006

I ran into a variety of problems trying to set a script task breakpoint in a package containing multiple script tasks. The debugger apparently treats the breakpoint as if it were set in ALL tasks in the package, not just the one in which it is actually set.

At best this results in hitting breakpoints in scripts where they are not set and at worst the debugger brings up the "Send error report" dialog and quits (while the package continues to run). The latter seems to happen most often when the script with the breakpoint has more lines than an earlier script and the breakpoint is set at a line number that exceeds the number of lines in the earlier script--it bombs when the earlier, shorter script starts.

To get the debugger to work under these circumstances I had to add some nonsense code like


While False
Dim i as Integer = 0
End While
to every script, at the same line number near the beginning of the script (line 40, for example). I then set a breakpoint on the middle statement in one of the scripts (doesn't matter which) to cause the debugger to open at runtime. It doesn't hit the breakpoint because the line is never executed. If the breakpoint is set on a line that can be executed in any script in the package, bad things tend to happen.
I then add a "stop" statement to the script that I want to debug. This only works if the debugger is already open, hence the dummy breakpoint above.
This workaround is usable, but I am debugging a package that has quite a few scripts and having to insert dummy code in all of them at a fixed line number is rather inconvenient. I would really like to see breakpoints work the way one would expect--only in the scripts where they are set.
Is there some other, easier way around this problem? Is there at least an easier way to get the debugger to open so that "stop" will work?

View 3 Replies View Related

Setting Timeout In ASP.NET Vs Setting Timeout In SQL Server

Oct 22, 2007

In my ASP.NET app, I'm executing a stored procedure via a SQLCommand the searches a customer database. I believe the default timeout is 90 seconds. I'm curious of what happens to the SQL Server Stored Procedure after timing out from the ASP.NET application. Does it timeout at the same time or do you have to set up a value in SQL Server?

View 1 Replies View Related

Package Changes Made And Saved Revert To Prior State When Package Closed And Re-opened

Jan 12, 2007

I copied and added an existing package as a new package to a project and have been having trouble with settings reverting to those for the original package after I modify and save the changes for the new package. Sometimes happens with the save itself, other times it happens when I close and re-open the package. Most cases are with connections that revert back to the original file reference, but there are also control flow and data flow elements that keep reverting back to either settings from the original package or defaults that result in the re-opened package being in error. Not sure how to get around this issue short of developing the new package from scratch which I'd rather not do since it is fairly complex. Any help anyone can provide is appreciated. Thanks.

View 8 Replies View Related

Passing A Variable Value (Package Scope) To A DTS Package Embedded Into Execute DTS 2000 Task

Jul 19, 2007

Hi friends,

I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?



Thanks

Subhash Subramanyam

View 4 Replies View Related

Passing Execute DTS Package Result (success/failure) To Calling SSIS Package

Mar 6, 2008

I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.

As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.

Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?

If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?

View 5 Replies View Related

Execution Of Child Package From Parent Package In Sql Server 2005 Integration Services

May 21, 2007

Hi,

I created a package which passes some infornmations( through parameters) to its child package.

I need to do some processing in parent package based on execution status of child package.i.e.

if child fails then some operation and if child succeeds then other operation.

To determine the status of execution of child package I am using two differnt constraint ..one constraint is having value "Success" and other having value "Failure".

My problem is that when child packge is executed successfully the constraint with value = "Success" works properly but when child fails the constraint with value "Failure" does not work.

-Prashant

View 4 Replies View Related

Error Stating Package Failure While Executing SSIS Package In Standard Edition

Feb 2, 2007

Hi,

I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.

But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.

Can any one help me how to over come this problem.



View 1 Replies View Related

Package Validation Error : The Package Designer Deletes The Code From Script Task.

Jun 14, 2006

While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:

Error at Validate File and Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated.
(Microsoft.DataTransformationServices.VsIntegration)

As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.

The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.

Please respond if anyone faced similar problem.

Thanks in advance!

Anand

PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>

View 5 Replies View Related

Several Different Errors When Creating And Running SSIS Package. Package Runs Successfuly Sometimes.

May 2, 2008

Hi All,



I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.



Sometimes when I am creating a package I get the following error in a message box:



SQL Server Import and Export Wizard

The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.

Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)





Other times when I run a package that has run successfully before I get the following error:



Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.





Other times I get this error message:



.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)





And still other times



The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.





I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.





Does anyone have any other suggestions to try?





Thanks.



View 4 Replies View Related

Is It Possible To Change Or Replace The Default Package Template Named New SSIS Package?

Feb 21, 2008

I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?

View 4 Replies View Related

Integration Services :: Unable To Load Package As XML Because Of Package Does Not Have Valid XML Format

May 11, 2015

i have created one package in production server called User_Import,It will fetch the info from excel file to the Sql  table, I have executed this package in ssis console successfully,But i have to schedule one job using this package on daily basis for that i have created on sql job using this package, Then it is failing i dont know the exact problem,I have full access to my database and full access to the sql agent to exuete any jobs,I have sharing the error message which am getting in the sql agent level, Please find the error msg:

05/11/2015 15:10:20,User_Imports,Error,1,SFRFIDCSCDB003PSQCM03,User_Imports,AD_User Load,,Executed as user: SFRSA-SFR-SQCM-02. Microsoft (R) SQL Server Execute Package Utility  Version 10.50.1600.1 for 64-bit  Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started:  15:10:20  Error: 2015-05-11 15:10:20.41     Code: 0xC0011007     Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B}  

Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error  Error: 2015-05-11 15:10:20.41     Code: 0xC0011002     Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B}

Description: Failed to open package file "C:UserssccmadminDocumentsVisual Studio 2008ProjectsUser_ImportsUser_ImportsUser_Imports.dtsx" due to error 0x80070005 "Access is denied.".  This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.  End Error  Could not load package "C:UserssccmadminDocumentsVisual Studio 2008ProjectsUser_ ImportsUser_ ImportsUser_ Imports.dtsx" because of error 0xC0011002.  

Description: Failed to open package file "C:Userssccmadmin DocumentsVisual Studio 2008 Projects

User_ImportsUser_ImportsUser_Imports.dtsx" due to error 0x80070005 "Access is denied.".  This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.  Source: {8E9D75BC-AA22-4366-9AC5-1507DA7AB21B}  Started:  15:10:20  Finished: 15:10:20  Elapsed:  0.015 seconds. The package could not be found.  The step failed.,00:00:00,0,0,,,,0

View 4 Replies View Related

Does Not Work --ETL Package Tutorial (Lesson 1: Creating The Project And Basic Package )

Nov 4, 2006

Hi,

I am new to SSIS. I followed the direction of the tutorial Creating Simple ETL Tutorial package in BooksOnline. I have tried more than five times and have done exactly as suggested in the tutorial but it does not work.

The URL is:

http://msdn2.microsoft.com/en-us/library/ms169917.aspx

I get these warnings and finally fails:

1)[Lookup [30]] Error: Row yielded no match during lookup.

2) [Lookup [30]] Error: The "component "Lookup" (30)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (32)" specifies failure on error. An error occurred on the specified object of the specified component.

3) [DTS.Pipeline] Error: The ProcessInput method on component "Lookup" (30) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.

4) [DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0209029.

Can someone help me with this tutorial error? or Am I doing something wrong.

Thank you,







View 6 Replies View Related

How To Pass Parent Package Parameters To A Package Executed By SQL Server Job Agent

Jan 11, 2007

Hi,

I'd like to know if there's a way to pass parent package parameters to a package executed by SQL Server Job Agent? It appears that sp_start_job doesn't have any variable that could accomodate this.

Hope to hear your ideas.

View 7 Replies View Related

Passing The Xml Configuration File To The Package As An Input Parameter While Executing The Package

Feb 2, 2007

Hi,

I am planning to develop a single package that will download files from ftp server, move the files to internal file server and upload it in the database. But I want to run this package for multiple ftp file providers. For each provider the ftp server might be different and the transformation to upload the files into a database table might be different.

So can I create a single package and then multiple configuration files (xml), which will contain the details fo the ftp file providers and then pass the xml file as a parameter while executing the package. The reason being that the timings of fetching the files is different for each ftp file provider and hence cannot be combined into one.

Is this possible?

Thanks for your help.

$wapnil

View 6 Replies View Related

Variable In A Foreach Loop Becomes NULL When Package Executed As Child Package

Dec 3, 2007

I have created a SSIS package with a Foreach Loop including a Data Flow Task, which in turn include a Row Count component which pass the row count value to variable with package scope. The variable is used in an Execute SQL Task following the Data Flow Task.



The package executes successfully when executed on its own, but when executed as a child from a parent package (which only include an Execute Package Task) the variable from the Foreach Loop becomes NULL.



There are a lot of other variables in the package receiving values dynamically without any problem, the row count variable however is the only variable in the package that receives a value as part of a Data Flow (and used in following tasks within the Foreach Loop).



Why does the variable become Null? For your information, I am using a variable with package scope and no variables from the parent package are used or passed from the child package to the parent package.



(For your information, we are running the 64 bit version)


View 13 Replies View Related

SQL 2012 :: How To Capture Data Flow Component Name Dynamically While Package SSIS Package Is Executing

Jun 3, 2014

I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?

View 5 Replies View Related

Problem When Running A SSIS Master-package-child Package On Non Default Sql-server Instance

Dec 6, 2007

Hi there

We have a SSIS run which runs as follows


The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.

The package is run from the file system, through a job-schedule.

We experience the following when running on a not default sql-server instance (called dkms5253uedw)

Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.

The master package then executes the first child package. We then in the sysdtslog get:

Error - €œcannot connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?

The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.

Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.

Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.

Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with


Error - €œtimeout when connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?

And the continues as in the first case

From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).

We have tried delayed validation in the packages and in the connection managers, but with the same results (error).

So we are desperately hoping that someone can help us solve this problem.


Thanx,
/Nils M - Copenhagen

View 3 Replies View Related

Execute Package Task: Error 0x80070005 While Preparing To Load The Package. Access Is Denied.

Jun 8, 2007

I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.

The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.

I have the Execute Package Task configured as follows:

Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)

I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.

I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):

450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.

I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved