Sp_xp_cmdshell_proxy_account Returns Error Code 5
Aug 6, 2007
As part of configuring my SQL Server 2005 box to be able to use the xp_cmdshell function, I ran sp_xp_cmdshell_proxy_account to set up the credentials:
sp_xp_cmdshell_proxy_account 'DomainDomainUser', 'password'
Unfortunately, it just returns:
Msg 15137, Level 16, State 1, Procedure sp_xp_cmdshell_proxy_account, Line 1
An error occurred during the execution of sp_xp_cmdshell_proxy_account. Possible reasons: the provided account was invalid or the '##xp_cmdshell_proxy_account##' credential could not be created. Error code: '5'.
I am assuming that this is an "Access Denied" error message. Has anyone got any ideas on why this is happening or what I can do to narrow down what the problem is. I can't find any logs with further information.
I have used a similar setup on another SQL Server 2005 box before and have never had a problem running the sp_xp_cmdshell_proxy_account function. I can't see what I have done differently this time.
Further information:
The SQL Server and SQL Server Agent services are running under the DomainDomainUser account.
I have given the DomainDomainUser the following privileges:
Act as part of the operating system
Log on as a batch job
Log on as a service
Replace a process level token
Let me know if you need any further information.
Thanks in advance for any help.
Ben
View 14 Replies
ADVERTISEMENT
Nov 22, 2006
I have the next code in my proyect:
If CurrentProject.IsConnected Then
MsgBox "Base ya Conectada.Procedemos a cerrarla primero", vbOKOnly
If SQLConexion.State = adStateOpen Then SQLConexion.Close
SQLConexion.Close
End If
SQLConexion.Open SQLSentencia
AbreConexionSQLSERVER = 0
If I detect that the connection is opened while I am initializazing varriables, I want to close always the connection and then begins my aplicattion always opening the connection, but it always returns a error 91..
suggestions?
View 1 Replies
View Related
Mar 23, 2006
Hi,I trying to write a select statement that will return each of my salesmen a region code based on a table of post codes using wildcards... eg.MK1 1AA would be matched in the region code table to MK1%SELECT dn.DEALER_CODE, dn.NAME AS DNAME, rc.REGION_ID,rc.POST_CODE, dn.POSTAL_CODEFROM REGIONAL_CODES rc CROSS JOINDEALER_NAW dnWHERE (dn.POSTAL_CODE LIKE rc.POST_CODE)The above statement works BUT there are some post code areas such asour friends in Milton Keynes that are split into two regions... eg MK1is region id 2 and MK10 is region 3.So a dealer with post code MK10 1AA would be matched to both rowsreturning duplicatesPOST_CODE REGION_IDMK1% 2MK10% 3I think the answer would lie in a subquery which returns the ID of theregion with the longest length of the postcode match (e.g.len(POST_CODE) for the rc table... return only the MAX....any ideas????Any help muchos appreciated, and I apologies now for the naming of thedealers name as a reserve word... not me!Ct
View 2 Replies
View Related
Jan 28, 2008
Hi All,
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
Thanks & Regards,
Prakash Srinivasan
View 4 Replies
View Related
May 11, 2015
java code to retrieve the data returned by SQL server stored procedure which is of CURSOR VARYING OUTPUT type and display the details on console.
View 3 Replies
View Related
Mar 12, 2002
When I run some code through an odbc driver onto a SQL server 6.5 database, from vb an error is being returned along the lines of
22005 Syntax error converting 'string' to INT4
if I copy this code, either from vb or from sql trace, and run it in isql the code runs without any errors.
The only thing I have found is about NULLs so I have removed these from the code that is passed through?
Any more suggestions?
View 1 Replies
View Related
Jul 23, 2005
My update query updates about 50 columns and they all have the sameformat: (Im using ADP to interact with the SQL Server)UPDATE dbo.GIS_EVENTS_TEMPSET VEH1TYPE =(SELECT VEHICLETYPEFROM VEHICLE AS AWHERE(GIS_EVENTS_TEMP.CASEID = A.CRASHNUMBER) AND(A.UNITID = 1)),VEH2TYPE = (....... same as above with UNITID = 2)VEH1DAM = (Same format different tables...)....nThe problem is that it's part of an import process that is dependent ondata from an outside source which come once a month.I found an error in one of the tables (a duplicate ID) which should notbe in the table this is causeing the "Subqurey returns more than onevalue" error.How can I guard against this..? If possible I would like it to onlyreturn the first value..I tried "COALESCE" but I couldn't get it to work I also tried "SELECTDISTINCT"....Any Ideas would be great.....
View 7 Replies
View Related
Nov 23, 2007
Is there some example of how i can add a return status into my stored procedure to have an extra field where I can verify if it runs successfully
1 if success
-1 if error (server, etc)
0 if empty record return
Thanks
View 2 Replies
View Related
Feb 21, 2007
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
View 1 Replies
View Related
Feb 26, 2008
Hi All,
When I use the following I get an error because of duplicate records in my table.
Update person
Set username = (Select update_person
View 2 Replies
View Related
Feb 26, 2008
Hi All,
When I use the following I get an error. I think it is because of duplicate records in my table.
Update person
Set username = (Select username
From update_person
Where person.firsname = update_person.firstname
and person.lastname = update_person.lastname)
There are a few users that have the same first and last name. How can I ignore the duplicate records and continue to update the table?
Thanks in advance.
View 13 Replies
View Related
May 23, 2006
Guys,
could someone please tell me : am I supposed to use the OLE DB
Command in a dataflow to call a stored procedure to return a value? Or
is it just supposed to be used to call a straightforward insert
statement only?
What I am hoping to do:
I have a table with a few columns and one identity column. In a
dataflow I would like to effect an insert of a record to this table and
retrieve the identity value of the inserted record... and I'd like to
store the returned identity in a user variable.
If I AM supposed to be able to do this... then how on earth do I do it?
I have spent hours fooling around with the OLE DB command trying to call a stored proc and get a return value.
In the Advanced Editor any time I try to add an output column (by
clicking on Add Column) I just get an error dialog that says "the
component does not allow adding columns to this input or output)
So, am getting pretty concussed .. banging my head of the wall like this...
So put me out of my misery someone please.... is the OLE DB Command intended for this or not?
Thanks
PJ
View 4 Replies
View Related
Jun 22, 2007
I googled on the latter error number and got nothing back
Error: 0xC0048006 at Set Destination File, ActiveX Script Task: Retrieving the file name for a component failed with error code 0x016F9EA4.
The former only returns one result which does not explain my problem
View 4 Replies
View Related
Jun 18, 2007
Hi peoples,
I have created a custom CLR user define aggregate function based on the example that i found at http://msdn2.microsoft.com/en-us/library/ms131056(SQL.90).aspx.
It works great until i discovered that it will failed if i try to do either one of the following:
query a large records e.g: more than 4k records
has IS NULL in my where clause e.g: WHERE myConcatenatedFld IS NULL
Other than these two, it works perfectly fine.
Here is the error that i got:
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
I have attached the Concatenate class that i used in my UDAGG.
Code Snippet
using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
using System.IO;
using System.Text;
[Serializable]
[Microsoft.SqlServer.Server.SqlUserDefinedAggregate(
Format.UserDefined, //use custom serialization to serialize the intermediate result
IsInvariantToNulls = true, //optimizer property
IsInvariantToDuplicates = false, //optimizer property
IsInvariantToOrder = false, //optimizer property
MaxByteSize = 8000) //maximum size in bytes of persisted value
]
public class Concatenate : IBinarySerialize
{
/// <summary>
/// The variable that holds the intermediate result of the concatenation
/// </summary>
private StringBuilder intermediateResult;
private const int MAX_STRING_LEN = 4000;
/// <summary>
/// Initialize the internal data structures
/// </summary>
public void Init()
{
this.intermediateResult = new StringBuilder();
}
/// <summary>
/// Accumulate the next value, not if the value is null
/// </summary>
/// <param name="value"></param>
public void Accumulate(SqlString value)
{
//Dont do anything if the input is null or empty
if (value.IsNull || value.Value.Length == 0)
{
return;
}
//Skip concatenation if the output exceed 4000 chars
if (this.intermediateResult.Length + value.Value.Length > MAX_STRING_LEN)
{
return;
}
//Concatenate output
if (!this.intermediateResult.ToString().Contains(value.Value.Trim()))
this.intermediateResult.Append(value.Value.Trim()).Append(", ");
}
/// <summary>
/// Merge the partially computed aggregate with this aggregate.
/// </summary>
/// <param name="other"></param>
public void Merge(Concatenate other)
{
//Skip concatenation if the output exceed 4000 chars
if (this.intermediateResult.Length + other.intermediateResult.Length > MAX_STRING_LEN)
{
return;
}
//Concatenate computed output
this.intermediateResult.Append(other.intermediateResult);
}
/// <summary>
/// Called at the end of aggregation, to return the results of the aggregation.
/// </summary>
/// <returns></returns>
public SqlString Terminate()
{
string output = string.Empty;
//delete the trailing comma, if any
if (this.intermediateResult != null
&& this.intermediateResult.Length > 0)
{
output = this.intermediateResult.ToString(0, this.intermediateResult.Length - 2);
}
return new SqlString(output);
}
public void Read(BinaryReader r)
{
intermediateResult = new StringBuilder(r.ReadString());
}
public void Write(BinaryWriter w)
{
w.Write(this.intermediateResult.ToString());
}
}
Anyone has any idea on how to solve this issue?. Thanks
View 5 Replies
View Related
Apr 22, 2008
So, here is my expression that I use in a textbox on the site header. In the report it just returns error... any ides?
="Wareneingangsübersicht" + " " + today() + " / " +
iif(datepart("WeekdayName",dateadd("d",1,today()))= "Samstag", DateAdd("d",3,today()), DateAdd("d",1,today()))
View 5 Replies
View Related
Jan 17, 2005
I have a stored procedure that works when executed in query analyzer. (It is also way too long to post here) When called from my application ado.net returns the error:
Invalid object name #idTable
If I run the proc in query analyzer using the same parameters (copied from quickwatch while debugging) there is no error.
While very complicated, this procedure runs quickly so timing out is not an issue.
Does anyone know why a proc would run in query analyzer and not in an asp.net/c# application?
Thank you.
View 4 Replies
View Related
Oct 22, 2007
The Query:
Code:
AS
DECLARE@UPLIDCount int
DECLARE @OldUPLIDCount int
SELECT @UPLIDCount = (SELECT Count(UPLID)/1000 AS adjcount
FROM tblProvLicSpecloc
WHERE DelDate is null
OR DelDate > GETDATE())
IF EXISTS(SELECT var FROM tblDMaxVars WHERE var = 'UPLID Count')
BEGIN
SELECT @OldUPLIDCount = (SELECT var FROM tblDMaxVars WHERE var = 'UPLID Count')
IF @UPLIDCount > @OldUPLIDCount
BEGIN
UPDATE tblDMaxVars
SET value = '' + CAST((@UPLIDCount*1000) AS nvarchar(1000)) + ''
WHERE var = 'UPLID Count'
END
END
ELSE
BEGIN
INSERT INTO tblDMaxVars (var, value, description)
VALUES ('UPLID Count', '' + CAST((@UPLIDCount*1000) AS nvarchar(1000)) + '', 'counts UPLID records and rounds down to the nearest thousand')
END
GO
The table tblDMaxVars only has three columns, none of which are integers, yet I still return this error:
Code:
Syntax error converting the varchar value 'UPLID Count' to a column of data type int.
Please help.
View 2 Replies
View Related
Apr 17, 2007
I have a table that contains a column for a calcuated member (x) of type decimal number. When I tried to display the total of this calculated member in the table footer (=sum(x)), I am getting "#Error" instead of the sum of all displayed calculated values.
Column X
--------------
0
0.67
0.10
0.23
#Error (footer cell, expression -> =Sum(x))
=First(x), =Last(x) and =Max(x) worked fine, not sure why Sum failed. Please help...
Thanks.
View 8 Replies
View Related
Jul 21, 2006
My proxy class returns web service responses well if I use it in a C# code.
I compile it with CSC and put it in GAC to use it with SSIS.
Then I get web service response with some field values populated with "Exception of type :{System.InvalidOperationException "' occured.
Here is the part of web service response received by the C# program:
Name
Value
Type
mainAddress
{Address}
Address
city
Metuchen
string
cityField
Metuchen
string
country
USA
Country
countryField
USA
Country
state
NEW_JERSEY
State
stateField
NEW_JERSEY
State
Here is the same object returned by compiled dll used in SSIS:
mainAddress
{BrokerConnectServiceV1.Address}
BrokerConnectServiceV1.Address
city
Metuchen
String
country
{System.Nullable(Of BrokerConnectServiceV1.Country)}
System.Nullable(Of BrokerConnectServiceV1.Country)
HasValue
FALSE
Boolean
Value
Exception of type: '{System.InvalidOperationException}' occurred.
BrokerConnectServiceV1.Country
Data
{System.Collections.ListDictionaryInternal}
HelpLink
Nothing
InnerException
Nothing
Message
Nullable object must have a value.
Source
mscorlib
StackTrace
at System.ThrowHelper.ThrowInvalidOperationException(ExceptionResource resource)
at System.Nullable`1.get_Value()
TargetSite
{System.Reflection.RuntimeMethodInfo}
state
{System.Nullable(Of BrokerConnectServiceV1.State)}
System.Nullable(Of BrokerConnectServiceV1.State)
HasValue
FALSE
Boolean
Value
Exception of type: '{System.InvalidOperationException}' occurred.
BrokerConnectServiceV1.State
Below is another posting by my associate on the same issue :
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=536615&SiteID=1
Any help is appreciated....
View 11 Replies
View Related
Apr 28, 2015
I've written sql code which takes a date and finds the Last Day of the Month one year ago. For example, it takes the date '2015-04-17' and returns the date '2014-04-30'. The code works fine in a query. Now I'm trying to turn this into a function. However, when I try to create the function I get the error:
Operand type clash: date is incompatible with int
Why is this error being returned?
Here is my function:
CREATE FUNCTION dbo.zEOM_LY_D(@Input Date)
RETURNS date
AS
BEGIN;
DECLARE @Result date;
SET @Result = convert(DATE, DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,dateadd(m, -11, @Input)+1),0)),101)
RETURN @Result;
END;
View 11 Replies
View Related
Jan 14, 2013
I Installed SQL Reporting services 2012 service with sharepoint 2013 ... and started it with success..I followed the microsoft's procedure.. URL....After , I have not encountered any problems when I created the application <--- 3 databases created in my SQLSERVER instance//The problem occured when I tried to click on my ssrs application_name --> system settings...ERROR 500 Correlation ID: f6c5f49b-6ab0-4009-6f31-fd019ddc3ecc
This what I read in the log of sharepoint -->
01/14/2013 12:18:36.22 w3wp.exe (0x0BEC) 0x05D8 SharePoint Foundation
Monitoring nasq Medium Entering monitored scope (Request
(GET:http://vwaisql201202:22628/_admin/ReportServer/ReportingServicesSystemSettings.aspx?ID=5abbbf0d-e8dd-4e8e-93d6-eddc77225a9f)). Parent No
[code]....
View 7 Replies
View Related
Apr 24, 2007
Trying to update my local developer version of SQL Server 2005 SP1 to SP2. The setup program terminates with the following information dumped from the logs. Not sure if it is related, but I recently installed the SQL Server 2005 Compact Edition (tools, runtime, etc) on the same development machine. It is a little too deep for me to figure out
Darryl
Here are the last few lines of the HotFix.Log
04/24/2007 14:46:48.374 MSP Error: 29527 The setup has encountered an unexpected error in datastore. The action is RestoreSetupParams. The error is : Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 138
----------------------------------------------------------
Failed to read property "InstallIds" {"MachineConfiguration", "", "DUTTONDARRYL1"} from cache
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection:etProperty
Source Line Number: 164
----------------------------------------------------------
Unable to write property into cache: IsClustered
Source File Name: datastoredatastorecacheschema.cpp
Compiler Timestamp: Wed Jun 14 16:28:00 2006
Function Name: DataStoreCacheSchema::writeProperty
Source Line Number: 115
----------------------------------------------------------
Unable
04/24/2007 14:46:48.694 MSP returned 1603: A fatal error occurred during installation.
04/24/2007 14:46:48.790 Registry: Opened registry key "SoftwarePoliciesMicrosoftWindowsInstaller"
04/24/2007 14:46:48.790 Registry: Cannot read registry key value "Debug"
04/24/2007 14:46:48.806 Copy Engine: Error, unable to install MSP file: c:f01fc31fd0988e3807HotFixSQLFilessqlrun_sql.msp
04/24/2007 14:46:48.822 The following exception occurred: Unable to install Windows Installer MSP file Date: 04/24/2007 14:46:48.822 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllcopyengine.cpp Line: 800
******************************************************
Now the SQL9_Hotfix_KB921896_sqlrun_sql.msp.log shows this as the last few lines
MSI (s) (A4:38) [14:46:48:630]: Product: Microsoft SQL Server 2005 - Update 'Service Pack 2 for SQL Server Database Services 2005 ENU (KB921896)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 1729
MSI (s) (A4:38) [14:46:48:630]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:662]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (A4:38) [14:46:48:678]: Product: Microsoft SQL Server 2005 -- Configuration failed.
MSI (s) (A4:38) [14:46:48:678]: Attempting to delete file c:WINDOWSInstaller6749ee3.msp
MSI (s) (A4:38) [14:46:48:678]: Unable to delete the file. LastError = 32
MSI (s) (A4:38) [14:46:48:694]: Cleaning up uninstalled install packages, if any exist
MSI (s) (A4:38) [14:46:48:694]: MainEngineThread is returning 1603
MSI (s) (A4:2C) [14:46:48:694]: Destroying RemoteAPI object.
MSI (s) (A4:04) [14:46:48:694]: Custom Action Manager thread ending.
=== Logging stopped: 4/24/2007 14:46:48 ===
MSI (c) (58:E4) [14:46:48:694]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (58:E4) [14:46:48:694]: MainEngineThread is returning 1603
=== Verbose logging stopped: 4/24/2007 14:46:48 ===
*************************************************************
The Summary.txt looks like this
Time: 04/24/2007 14:46:48.854
KB Number: KB921896
Machine: DUTTONDARRYL1
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Failed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Database Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Analysis Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER
Reporting Services (MSSQLSERVER) ENU SP1 9.00.2047.00 x86 DEVELOPER
Notification Services ENU SP1 9.00.2047.00 x86 DEVELOPER
Integration Services ENU SP1 9.00.2047.00 x86 DEVELOPER
SQL Server Native Client ENU 9.00.2047.00 x86
Client Components ENU SP1 9.1.2047 x86 DEVELOPER
MSXML 6.0 Parser ENU 6.00.3890.0 x86
SQLXML4 ENU 9.00.2047.00 x86
Backward Compatibility ENU 8.05.1704 x86
Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x86
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : In Progress
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29527
View 8 Replies
View Related
Mar 22, 2007
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
http://aspalliance.com/889_Extracting_Data_from_a_Flat_File_with_SQL_Server_2005_Integration_Services
to create my datafow.
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
View 4 Replies
View Related
Jul 13, 2006
Hi,My SQL Server 2005 won't start - can anyone provide some help? Thisseems to be the most significant error:- TDSSNIClient initialization failed with error 0x5, status code 0x51.There was some info here, but the reg key described looks okay:- http://blogs.msdn.com/sql_protocols/I am running SQL Server 2005 64-bit Standard Edition. The server inquestion is the first node of an Active/Active Cluster. This firststarted happening while I was trying to add a share as a clusteredresource of the other node (not to this node's resources).I have not yet reinstalled SQL Server 2005 because I am hoping for moreexplanation of the problem and a possible fix.Thanks,Tom
View 1 Replies
View Related
Jul 20, 2005
Hi All,I want to catch the next MSSQL error in my SQL code with following continuecalculationsServer: Msg 17, Level 16, State 1, Line 1SQL Server does not exist or access denied.If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQLwill not continue with (b) - I need the code in (b) to run despite whetherthe previous exec was successful or not - Any ideas?begin transaction(a) exec REMOTE_SERVER_1...bankinsert '1' , '1' , 1 , 0 , 0(b) print @@errorcommit transactionwhere REMOTE_SERVER_1 is link to server created byEXEC sp_addlinkedserver @server = 'REMOTE_SERVER_1', @srvproduct = '',@provider = 'SQLOLEDB', @datasrc = 'MYCOMP1', @catalog = 'mirror2'EXEC sp_addlinkedsrvlogin @rmtsrvname = 'REMOTE_SERVER_1', .....Exec sp_serveroption 'REMOTE_SERVER_1', 'data access', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc out', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'collation compatible', 'true'Any help will be greatly appreciated
View 1 Replies
View Related
Feb 29, 2008
Hi all,
can anyone tell me if an oleDb connection (provider is Jet 4.0 to Access database) can be enlisted in a Distributed Transaction?
The goal is to copy data from SqlServer to Access within a transaction.
Pier
View 10 Replies
View Related
May 10, 2007
I have tired for this!
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.
View 6 Replies
View Related
May 3, 2008
hello,
we have changed the name of MS SQL server 2005 from XYZ to ABC using
sp_dropserver <old_name>
GO
sp_addserver <new_name>, local
GO
Now our maitenance plan is getting failed we are not able to execute backup jobs we are getting following error
Date 03.05.2008 16:00:00
Log Job History (ADM_AdminDB_TP_Backup.Subplan_1)
Step ID 0
Server ABC
Job Name ADM_AdminDB_TP_Backup.Subplan_1
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. Unable to determine if the owner (XYZSQLServer) of job ADM_AdminDB_TP_Backup.Subplan_1 has server access (reason: Could not obtain information about Windows NT group/user 'XYZSQLServer', error code 0x534. [SQLSTATE 42000] (Error 15404)).
please help us in this issue
View 13 Replies
View Related
Jul 28, 2006
This error occurs when the ActiveX task tries to execute:
[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x001B6438.
Anybody know how to troubleshoot these errors? I can't find anything on this error code. The same script works in DTS.
View 8 Replies
View Related
Jan 7, 2008
Hello,
I am applying hourly differential backup to the backup server from production with the following command. This command makes the database on standby server into read only mode.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
Now I want to run a command which will put the database in write mode. I have created a job which would make the datbase Write mode. This job runs successfully sometimes and fails sometimes. I need to ensure that the job always succeeds. When it fails, how do I troubleshoot and what is the possible fix?
Thanks in advance.
The error message is
Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The steps for the job are as follows with the failing step highlighted in bold.
copy /y "\172.31.9.12Remedy BackupackupSQL backupsql_full_backup" "E:SQL backup from productionsql_full_backup"
copy /y "\172.31.9.12Remedy BackupackupSQL backupSQL daily diff back up" "E:SQL backup from productionSQL daily diff back up"
xp_cmdshell 'net stop "bmc remedy action request system server"'
exec rp_kill_db_processes 'ARSYSTEM'
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
Failing step
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
RECOVERY
xp_cmdshell 'del /f "E:SQL backup from productionsql_full_backup"'
xp_cmdshell 'del /f "E:SQL backup from productionsql daily diff back up"'
xp_cmdshell 'net start "bmc remedy action request system server"'
I have scheduled the following hourly diffential restore job too which never fails.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
EXEC MASTER..XP_CMDSHELL 'del /f "E:SQL backup from productionSQL daily diff back up"'
View 12 Replies
View Related
Dec 20, 2006
Hi,
I just installed SQL Server 2005 on Windows Vista.
I am getting an error "An unknown error occurred in the WMI
provider. Error Code 8000000A" when connecting to a web server. The
reporting services is running. Is there any other installation that is
missing. Please help.
View 4 Replies
View Related
Mar 22, 2006
Hello everyone.
I am trying to install Project Server, and i'm having issues with sharepoint, and connecting to SQL:
dataserver is running sbs2003 sql2003 and analsys services.
server2 is running server2003 is to be the application server for project.
ProjectDb is the database that i have setup in sql.
username is the account that can control everything as administrer.
in Sharepoint is asks for the database server: <<dataserver>>
SQL Server database name: <<ProjectDb>>
I'm using windoes authentication and then i click ok, and get the error message.
I've also see the error message can not find the SQL Server, and access denied. Under ODBC i have installed the sql server information under System DSN.
Any help would be great.
Thanks
Everett Buel
View 3 Replies
View Related
Jan 26, 2001
I execute an UPDATE statement using EXEC after I build it into a string:
@lcSQLString = 'UPDATE ' + @@mytable + 'SET x = y ...'
EXEC(@lcSQLString)
When the UPDATE fails, @@ERROR is nevertheless set to 0, because it returns the status of the EXEC command (which succedded) and not the @lcSQLString (which failed). At least, that is the explanation, I think. If I execute the statement directly by substituting the variables with their values, @@ERROR displays the correct value.
How can I capture @@ERROR within EXEC?
Thank you,
Aristotle
View 2 Replies
View Related
