Specifying Regional Settings In XmlConfigfile For SSIS Package
Jan 30, 2008
Hi All,
I have been playing around with SSIS for a bit, and i am running into the following problem.
I am trying to import 3 worksheets from an excel file.
The import must be performed on several servers.
I created a config file for this which contains the path to the excel file and the connectionstring, and the LocaleID's of the different tasks.
I have the following tasks :
1. preparation SQL task ( this calls a few sql statements which cleanup certain import tables )
2. data flow task ( this the actual import from the excel file to several tables, this what goes wrong )
3. execute SQL task ( this calls a stored proc which does some filtering the imported data into other tables ).
point 2 is giving problems.
Point 2 will only work when i change my computers regional settings to English.
If i have my settings set to Dutch, it won;t work. Even specifying the english localeID's seem to have no effect.
The problem is a decimal field in the database, and the difference in decimal separator. When i set my regional settings to English the values in the excel are notated like 74.54 which works. And when i have the dutch regional settings the same value in excel is displayed like 74,54. I haven't got a clue how to solve this.
Is there a way to tell the SSIS to not use the regional settings, but use the settings specified in the config file ?
And if this is possible how can i check if the correct settings are used ?
View 1 Replies
ADVERTISEMENT
Feb 7, 2008
Here's the situation:
I have a ssis package which receives 3 dates as input parameters (3 datetime variables), executes different data flows and at the end inserts (among some other values) these 3 dates into a custom log table.
The problem comes while inserting the values into a log table. I added an Execute SQL Task that calls a stored procedure which inserts a record into a log table (sqlStatement exec dbo.InsertIntoLog date1=?, date2=?, date3=?).
In Parameter mapping section I set parameters = variables that hold the datetime values. The problem is that the dates are inserted into the log table in American format (mm/dd/yyyy, that's the server setting), my dates are in the european format...
Any ideas how to avoid it? Is there a way to write an expression instead of the sqlStatement in which I'd do some datepart-ing?
View 25 Replies
View Related
Dec 23, 2006
I tried Data Mining Add-Ins for Office 2007 - CTP December 2006.
Test settings: Windows XP SP2 english with Italian regional settings, Office 2007 english (RTM), SQL Server 2005 Developer (with SP2 CTP Dec06) and Data Mining Add-ins for Office 2007 (CTP Dec06).
If I keep regional settings in Italian, I get error like this:
Old format or invalid type library. (Exception from HRESULT: 0x80028018 (TYPE_E_INVDATAREAD))
If I change regional settings to English, the Add-in works.
I found this description as the possible cause of the problem: http://msdn2.microsoft.com/en-us/library/ms178780(vs.80).aspx - if this is the issue, it would be necessary to change the ExcelLocale1033Attribute on the component.
Is there another workaround other than to install the Office 2007 MUI?
Marco Russo
http://www.sqlbi.eu
http://www.sqljunkies.com/weblog/sqlbi
View 10 Replies
View Related
Oct 18, 2007
Hi
We have a bunch of servers running server 2000 & 2003 along with many sql server (versions 2000 & 2005) databases in a production environment pulling transactions then doing warehousing & reporting.
An audit has shown up 1 production server using English_US 'mmddyyyy' system date formats, all others being English_Australian 'ddmmyyyy'.
Is it safe to simply change the regional settings on this English_US server to English_Australian or will it mess up the data in our SQL 2005 databases? I've not been able to get a definitive answer from anyone yet!
many thanks in advance; GaryP
View 1 Replies
View Related
Apr 24, 2007
Hello Everybody,
I have developed a SSIS package to pull data from a remote SQL Server.
I have specified Database related settings in a dtsconfig file.
I was just wondering if we have any way of encrypting the config file so that only my package can read information out of it.
Or is there any other better way where i can store my database configuration (uid, pwd) so that it is not viewed by anyone.
please help me with this issude, thanks in advance...
Regards,
Sudhir Kesharwani
View 4 Replies
View Related
Oct 27, 2006
I have two issues:
I have a simple parent that uses an Execute Package Task to call a simple child package. The child package has a Data Flow that I disabled. When running the child package by itself, the data flow task is bypassed. When running the package via the parent the data flow task executes.
Second issue is when you disable the package configurations in the child, the parent doesn't recognize that it's diables and tries to load the configurations.
It's almost like there are some settings in a child that get ignored by the parent??
Anyone else experience this?
thx
View 1 Replies
View Related
May 27, 2008
OK, here's the scenario:
I have some libraries (DLL) that I call from a regular console application. The data access methods get the connection string from the app.config, nothing special there.
The thing is: now I need to use the libraries inside a SSIS package. I call them from a script task, and everything is fine, except for the connection string.
Is there a way that I can get the connection string from the SSIS package configuration like I would from the app.config? Maybe some alternative to ConfigurationManager.AppSettings["ConnString"] in the DTS Runtime?
Thanks in advance...
View 3 Replies
View Related
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
Jun 23, 2014
I am currently designing a SSIS package that will migrate data from Syabse to Sql server. If these packages are to be deployed to file system (as this is one time run for migrating data) or to SSIS catalog or to Sql server.
Also, I have not changed the default protection level value in packages during design time and would like to know if I have to change it while handling the deployment using DTutil (yes, i need to deploy & execute using command line utilities).
Please note that I do not have access to PROD, UAT environments and deployment team will use my BAT file that is expected to deploy and execute the packages.
View 3 Replies
View Related
May 30, 2007
What are the general guildlines for choosing these settings, like paralle vs. sequential, different error configurations? The default selection for processing multiple dimensions is paralle and use default error configuration. But the default for processing multiple partitions is sequential. I cannot find anything helpful other than the definitions from the online help. TIA.
View 9 Replies
View Related
Jan 30, 2007
Hello,
I am running reporting server on a "english" server with dutch regional settings.
My client and the client of the users are also a "english" client with dutch regional settings.
A dutch number should be formatted like 1.234.567,89
Unfortenately when I run a report I get the number back (non formated) like 1234567.89
How do I get it in the dutch format ?
With regards,
Constantijn Enders
View 2 Replies
View Related
Jan 10, 2007
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
View 4 Replies
View Related
Oct 19, 2007
Hello,
I have a problem with date parameters in my Visual Studio reports. I have set parameters €śStart date€? and €śend date€? as €śdate time€? fields, and the report works fine on my computer, but as soon as I put it in report server and start opening from other computers in the costumers place, the date stays right only about half of the times, I gues it depends on regional settings of the computer that opens the report. For example date 02/12/2007 changes to 12/02/2007 that in effect changes the month from February to December, and if the day is 13 or higher I do not get any result at all.
How should I set the date parameters that they could be correctly open and wieved from any computer no matter what regional settings are?
View 3 Replies
View Related
Aug 12, 2007
Hi,
I have a date field in my report which takes the current date as the value. My default regional settings is en-US. If I change my regional settings to Germany, on executing the report, I get rsReportParameterTypeMismatch for the Date parameter.
Any help in this regard is welcome.
Thanks.
View 2 Replies
View Related
Aug 27, 2004
Hi all,
With Windows regional options are set to Dutch/Netherlands (or any other country using comma as the decimal symbol), MS SQL Server BCP Delivers incorrect figures to the target table.
The source table is a text file containing commas as the decimal character (As an example, in the text file 100.000 is represented as 100,000).
The target table is a Sql Server database table, with the column in question defined as a FLOAT datatype.
When BCP is run to deliver the data from the text file to Sql Server,
all figures are multiplied by 1000 because the input file for BCP contains a comma as the decimal symbol.
Thus, instead of the data being delivered with a value of 100, it ends up having a value of 100000
Is there anyone out there who is aware of any command line parameters that can be added to the bcp command in order to avoid this ? Note, the field in question is defined as SQLCHAR in the BCP format file.
Thanks for any help anyone may be able to offer.
View 2 Replies
View Related
Dec 11, 2007
How to return time & number format that has set in the regional setting using stored procedure.
Following is my sp for getting current date format from Sql Server.
View 1 Replies
View Related
Mar 6, 2008
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
View 5 Replies
View Related
Feb 2, 2007
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
View 1 Replies
View Related
May 2, 2008
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
View 4 Replies
View Related
Feb 21, 2008
I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies
View Related
Jun 3, 2014
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies
View Related
Dec 6, 2007
Hi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €ścannot connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €śtimeout when connect to database xxx€?
Info - €śpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
View 3 Replies
View Related
May 21, 2007
hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
View 8 Replies
View Related
Sep 10, 2007
Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
View 1 Replies
View Related
Jul 6, 2006
Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
View 8 Replies
View Related
Oct 13, 2007
I have two SSIS packages in a project, one calling the other. The parent package works fine in my local mechine. After they are deployed to the production, I schedeul jobs to run the packages in the SqlServer. The child package works fine if I run it alone, but the parent package could not find its child package if I run the parent package . As I checked, all xml config files and the connection string pointing to the child package were set correctly. It seems the parent package did not use the xml config file. Can someone help me? Thanks in advance.
View 9 Replies
View Related
Mar 25, 2008
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
View 7 Replies
View Related
Sep 8, 2006
Hi,
I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
pkgFile.Variables["User::DestinationServerName"].Value = <myvalue>
Deploy the package as follows:
applnObj.SaveToSqlServer(pkgFile, null,
destinationServer, null, null);
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:
Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.
Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?
Thanks,
Sandhya
View 8 Replies
View Related
Nov 6, 2007
when i run the job using network service account credentials job is failing. But when i run the package individually, it is tasting success. when it runs as job, this is the error message i am getting
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have changed to 32-Bit run time and ran the excel package, even then it is failing...i tried to use my credentials (i am admin on the box), even then it is failing...please suggest
View 1 Replies
View Related
Jan 22, 2007
running ssis package with ssis run time compoenents and sql server 2000...
Is it possible to run ssis packages that point to servers on sql server 2000
without installing sql server 2005 ?
Can we just install runtime for ssis and run the packages ?
Please explian with links if possible
thanks a lot
View 18 Replies
View Related
Oct 9, 2015
I want to achieve the following in (SSIS/SSDT for SQL 2012) -Â
I have a generic SSIS package which simply sends out email notifications using SMTP email task (this package is within its own project, and has project level input parameters).
I need to be able to call this package in the Event handler section of every package (numbering in about less than 60) that we have. These packages are within their own respective projects.
I thought I could use the "execute package task", but it turns out , using this, I cannot call a package that is part of some other project. I also cannot call a package that is stored in the CATALOG. Is there any way I can do this ?
When I call the child package , I should be able to send in parameters like - error information and package name of the Parent package.
View 8 Replies
View Related
Oct 29, 2007
I have an SSIS package (TransAgentMaster) that I recently modified to include a call to a child package via the file system. The child package creates a text file. When I run the package in dev studio then the child package/text file is produced.
I then imported the TransAgentMaster as a stored packagesfilesystem package into SQL SSIS and executed the package. The child package produced the text file.
I then ran the SQL Server Agent to see if the child package would work and it did not generate the text file. Thus after updating a SSIS package importing the package into SSIS the job that calls the package will not call the child package. Please not that the TransAgentMaster package calls 7 children packages €¦ just not my new one.
Any thoughts why the agent will not run the child newly crated childe package?
View 3 Replies
View Related
Jan 4, 2008
Dear Friends,
I store several configurations in the main database of my SSIS packages. I need to get the servername from a xml or txt file in order to get those configurations stored in my database.
How you think is the better way to do that?
Using a FlatFileSource to read the file and a script to save the value into a SSIS variable?
Using the package configuration I cant do that... maybe I dont know, but I can save the SSIS variale in the configuration file, but what I need is to do the inverse, read the configuration file and save the value in the SSIS variable.
How the best way you suggest?!
Regards!!
Thanks.
View 18 Replies
View Related
