i want to write a code that can split the addresses into multiple fields. anyone can point me out where to start?
lets say i have "12 north plaza boulevard apt.16" and i want it to become:
address_number
12
suffixA
North
street_name
plaza blvd
suffixb
apt16
HiHo,
just a beginners question:
I have the following row with 2 fields:
Field 1: Task A
Field 2:´ 1;2;3;4
The number of semicolon divided elements in Field 2 is variabel.
I would like to create new rows like:
Row 1 Field 1: A Field 2: 1
Row 2 Field 1: A Field 2: 2
Row 3 Field 1: A Field 2: 3
Row 4 Field 1: A Field 2: 4
I think I should use a Foreach Loop.
But I don't exactly how to do it?
best regards
Chris
I am trying to get an address field into 2 colums. I need the number value in one column and street name in another column.
The data is stored:
876 blue ct
9987 red dr
23 windyknoll
This is what I haveelect
substring(Address,0,charindex('',Address)) as number
,substring(Address, (charindex('',Address)+1)
,len(Address)) as address
from contact
I have a table that I am using in a package to create an extract from. In that table is an address field called "Street" that is 255 characters in length. My table also has 3 additional fields called address_1, address_2 and address_3 that are each 50 characters in length because that is the requirement for my extract. I need to split the address field up in such a way that if it is longer than 50 characters, it backs up to the first space in the address prior to character #50, puts that info in street1, then from that cut off point used in street1, puts the next 50 up to the prior blank space in street2, then the remainder in street3. Where the extract will be used only has three 50 character fields so if the data runs more than 150 characters, the street3 data will just have to be truncated. No way around that, but I don't anticipate any address getting close to that long. Although doing such a split would be much easier using SQL, the solution requirement is that it be done in the package, not using SQL to do so.
I'm assuming I need to use a "derived column transformation" in my data flow. But, I can't figure out how to do what I need to do with a derived column transformation.
Example of info in an address:
123 Chicamauga Avenue South, Across the Street from International Center Square, Apartment Number 17650 Tokiwa-machi Machida
position 1-50:
123 Chicamauga Avenue South, Across the Street fro
Therefore, Street1 would need to get:
123 Chicamauga Avenue South, Across the Street
[code]....
I have a number of text boxes (one on top of the other) to display the addresses in my report. I have Address_name, Address1, Address2, Address_city, Address_State, Address_PostalCode - Each with its own text box except for the city, state, and postal code for which I just combined the fields. However, I have many who do not have any data for Address2 and don't want an empty line in the address. Is there an expression I can use to display the next line or move/shift up the remaining parts of the address? Would the iif and isnothing expressions be helpful, and if so, how do I write it correctly?
View 4 Replies View RelatedI have a table with column person_name and I want to update that table and
insert the values of different columns FIRST_NAME and LAST_NAME.
Anybody can tell me the T-SQL code to do above problem?
Thank you very much!
The file of about 30,000 records contains an address field where addresses are entered in the following form:
128 NW 8 ST
3444 SW 19 AVE
32 SE 122 TERR
12604 SW 148 PL
Then there are anomalies such as
123 E BLVD
(I can ignore the anomalies until the main challenge is overcome.)
The challenge is that I have been asked to sort the addresses in the following order:
quadrant (e.g., NW, SW),
street number (e.g., 122),
street name (e.g., TERR)
house number (e.g., 128)
It seemed like I should create a view that can be updated regularly, as records will be added/deleted ongoing.
How do I get these part into a four-column view? Or, is there another way to do this?
Esther
I'm pulling individual address fields into my script, some of which are null.
I would like to add in a carriage return after ONLY those fields that are NOT NULL.
Current script is:
SELECT
ISNULL(SAD.HOUSENUMBER,'') + ISNULL(SAD.ADDRESS1,'') + ISNULL(SAD.ADDRESS2,'') + ISNULL(SAD.ADDRESS3,'') + ISNULL(SAD.CITY,'') + ISNULL(SAD.COUNTRY,'') + ISNULL(SAD.ZIP,'') as 'FULL_ADDRESS'
FROM
SFAADDRESS SAD
Whats the best way to do the following?Field1 in Table1 contains numbers and characters seperated by #Examples: aaa#01, kjhkjhjh#21 and jlkjlkj#123How can I create two new fields in Table1, one containing what is tothe left of the # and the other what is to the right?Regards,Ciarán
View 4 Replies View Related I have the field LocationID (string)which has values like
"AZ001","AZ002","IN002","IN004" first 2 will be always alphabets and remaining 3 will be numbers,
I want to split it like "AZ" ," 001"
"AZ","002"
"IN" "002"
"IN" "004"
now i will populate dropdownlist with unique values of "AZ" "IN"
according to first dropdownlist how i will populate second dropdownlist?
So how to write sql query for splitting? and then populating the dropdownlist ?
I have the following fields in table A:
GL_ID| Date |GL_Name_VC | Amount Period_TI|Year_SI
===============================================
1000|31/12/2005 | Sales | -8,000.00 | 12 | 2005
===============================================
1000|06/01/2006 | Sales | -6,000.00 | 01 | 2006
===============================================
1000|20/01/2006 | Sales | 2,000.00 | 01 | 2006
===============================================
1000|28/01/2006 | Sales | -4,000.00 | 01 | 2006
The above database is running on Microsoft SQL Server 2000 and i would like to query
for a report that looks something as below:
Period | Date | GL_Name_VC | Debit | Credit| Net Change | Balance
===============================================
01 |01/01/2006|Opening Bal | 0 | 0 | 0 | 8,000
01 |06/01/2006|Sales | 0 | 6,000 | 0 | 0
01 |20/01/2006|Sales | 2,000 | 0 | 0 | 0
01 |28/01/2006|Sales | 0 | 4,000 | 8,000 |6,000
The formula for the above calculated fields are as below:
Opening Balance = carried forward balance from Year 2005
Debit = All positive amount
Credit = All negative amount
Net Change = Total Credit - Total Debit in Period 01
Balance = Total of Net Change + Opening Bal
Guys, hope someone out there can help me with the sql command for the above report?
I have the following fields in table A:
GL_ID| Date |GL_Name_VC | Amount |Period_TI|Year_SI
===============================================================
1000|31/12/2005 | Sales | -8,000.00 | 12 | 2005
===============================================================
1000|06/01/2006 | Sales | -6,000.00 | 01 | 2006
===============================================================
1000|20/01/2006 | Sales | 2,000.00 | 01 | 2006
===============================================================
1000|28/01/2006 | Sales | -4,000.00 | 01 | 2006
The above database is running on Microsoft SQL Server 2000 and i would like to query
for a report that looks something as below:
Period | Date | GL_Name_VC | Debit | Credit| Net Change | Balance
=====================================================================
01 |01/01/2006|Opening Bal | 0 | 0 | 0 | 8,000
01 |06/01/2006|Sales | 0 | 6,000 | 0 | 0
01 |20/01/2006|Sales | 2,000 | 0 | 0 | 0
01 |28/01/2006|Sales | 0 | 4,000 | 8,000 |16,000
The formula for the above calculated fields are as below:
Opening Balance = carried forward balance from Year 2005
Debit = All positive amount
Credit = All negative amount
Net Change = Total Credit - Total Debit in Period 01
Balance = Total of Net Change + Opening Bal
Guys, hope someone out there can help me with the sql command for the above report?
I have a row in a SQL table that has 4 numerical values, separated by comma. I'd like to take this and make it 4 separate columns. Values are not always the same length, but are always delimited by commas.
Any ideas how I could do this in T-SQL?
Here's a question for the SQL gurus out there:
I have a varchar(20) field DIAGNOSISCODE in a table that can either be null, or contain up to 3 comma-separated codes, each of which relates to a description in another table. For example, some sample rows might be
8060
8060,4450
8060,4123,3245
Now I need to structure a query to return these values from this single field as three fields CODE1, CODE2, CODE3, with NULL as appropriate for example
CODE1=8060, CODE2=4450, CODE3=NULL.
I have been using CASE along with CHARINDEX and PATINDEX but it it becoming extremely messy. Can anyone think of a "neater" way to return three fields from this one field?
Any help very greatly appreciated.
Thanks, Simon.
I know this should be simple but I can't figure it out. I am reading in a csv file to a conditional split task, all I want to do is split the file based on a field. Some values in field will have a suffix say ABCD while others wont. So my conditional split says Right(FieldA,4)=="ABCD" which then splits file in two directions or at least it's meant to. Problem is that it does not work. I think it has something to do with the field type in the csv file although I have tried using a Data Conversion task but to no avail all the field values with ABCD suffix are ignored by my conditional split and head off the same way as other values. Funny thing is is that if I manually add a value to the file with a suffix of ABCD and run task again then the conditional split works on the manually added row and all rows with suffix of ABCD. It's like it does not recognise previous values as string until one is added manually.
Thanks
Hi.
I'm trying to write an SQL Query that will take a delimited field and return each item as a row.
Example
Take the AuthorizedRoles and TabID fields from the Tabs table
AuthorizedRoles TabID
0;11;__________1
0; 15 ;17;______6
-2;____________7
I would like to return a unique record for each Authorized Role
AuthorizedRole TabID
0____________1
11___________1
0____________6
15___________6
17___________6
-2___________7
Any ideas?
Cheers
Dave
In SQL SErver 2008, I have a text column. I need to display either 2nd word in the text column or 1st word in the text column based on certain conditions.
How shall i display either 2nd word or 1st word from a text field.
How can I split this incoming file into separate txts. I want to cut out each Header/detail row section into a new txt. What I mean by header/detail row:
incoming txt file:
http://www.webfound.net/split.txt
basically want to cut out each section like this:
http://www.webfound.net/what_to_cut.txt
http://www.webfound.net/rows.jpg
and a kicker...each new txt name must use a certain field (based on x numbers in header row) followed by another field whcih is the date form the header row. somethign like this:
SUBSTRING(InputFieldBigString,LEN(InputFieldBigString) - 59,4) == "HD" + SUBSTRING(InputFieldBigString,LEN(InputFieldBigString) - 1,8) == "HD" + .txt
I need some hand holding here, it's my first time trying to do something so complicated in SSIS 2005. If I can first just get the txt split into multiple, that would be a big help.
I need to split a field based off it's length. Â Initial thought was to take Left(field, characters), and Right(field, characters), but now I see I am duplicating the data as I am capturing too much of the data in. Â However, what I actually need to achieve is in field1 capture the left 1000 characters, and in field 2 take from character 1001 to the end. Â How can I update my syntax so that field2 will ONLY capture from character 1001 to end?
field1 = COALESCE(CASE WHEN DATALENGTH(exitinterviewnotes) > 998 THEN LEFT(CAST(exitinterviewnotes AS VARCHAR(MAX)), 1000) ELSE exitinterviewnotes END,''),
field2 = COALESCE(CASE WHEN DATALENGTH(exitinterviewnotes) > 998 THEN RIGHT(CAST(exitinterviewnotes AS VARCHAR(MAX)), 1000) END,'')
Hi all,
I have a requirement like this ,
I have Address Column.It is containing data like Mr. K KK Tank Guntur Jal Bhavan, Univercity Road, Rajkot 9843563469
I have to split this into 3 more columns like(Address1,name,phoneno)--
Means i have 4 columns including Address Column.(Address,Address1,name,phoneno)
Example:
Address:Rajkot
Address1:Univercity Road
Name:Mr. K KK Tank Guntur Jal Bhavan
PhoneNO:9843563469
How can i acheive this one with out data lose in Address Column.
Thanks in advance.
I have a table which looks like
Low High
-------------------------
cx01 cx04
sn05 sn08
I need output like
Result
-------------
cx01
cx02
cx03
cx04
sn05
sn06
sn07
sn08
How to get this output using sql query?
My code looks like this for now:
Code:
SELECT CDELIG.CDELIG_QTE AS [Quantity],
(ARTICLE.ART_PRIXPUBLIC * CDELIG.CDELIG_QTE) * 100 AS [Total line price],
(CDELIG.CDELIG_PU_SUBACC_MNT * CDELIG.CDELIG_QTE) * 100 AS [Grant]
FROM CDELIG
INNER JOIN ARTICLE ON ARTICLE.ART_ID = CDELIG.ART_ID
And the result like this:
Quantity Total line price Grant
120 84000 0.0000
255 178500 0.0000
1 700 0.0000
The problem is that if a quantity is higher than 99 i got to split the row. And the others has to change also because the quantity would have change.The expected result will be like this:
Quantity Total line price Grant
99 69300 0
21 14700 0
99 69300 0
99 69300 0
57 39900 0
1 700 0
SOURCE TABLE
ID DESCRIPTION
1 I am a programmer
2 I am a doctor
Destination Table
ID LINE DESCRIPTION(Varchar10)
1 1 I am a pro
1 2 grammer
2 1 i am a doc
2 2 tor
Please someone help me on this.
Hello,
Hoping someone here can help. Perhaps I'm missing something obvious, but I'm surprised not to see a data flow task in SSIS for splitting *columns* to different destinations. I see the Conditional Split task can be used to route a *row* one way or another, but what about columns of a single row?
As a simple and somewhat contrived example, let's say I have a row with twelve fields and I'm importing the row into a normalized data structure. There are three target tables with a 1-to-1 relationship (that is, logically they are one table, but physically they are three tables, with one of them considered the "primary" table), and the twelve input fields can be mapped to four columns in each of the three tables.
How do I "split" the columns? The best way I can see is to Multicast the row to three different OLE-DB Destinations, each of which inserts to one of the three target tables, only grabbing the four fields needed from the input row.
Or should I feed the row through three successive OLE-DB Command tasks, each one inserting into the appropriate table? This would offer the advantage, theoretically, of allowing me to grab the identity-based surrogate primary key from the first of the three inserts in order to enable the two subsequent inserts.
Thoughts?
Thanks in advance,
Dan
I have one really long .sql file I'm working on. It's actually a data conversion type script. It's gotten really cumbersome to work on as long as it is. I would like to split up various logical parts of script into their own .sql file.How can I have one file .bat, .sql or whatever call each .sql file in the order I specify? Hoping this is easy. Thanks
View 3 Replies View RelatedI need to split a row into multiple rows based on multiple column values.
time_id = 111
employee_id = 222
time_in = 10:00
time_out = 16:00
break1_in = 12:00
break1_out = 13:00
break2_in = 14:00
break2_out = 15:00
I would like to break this into multiple time_in/time_out based on if they have breaks. Breaks are not required and will come across blank if non are taken.
row 1
time_in 10:00
time_out 12:00
row 2
time_in 13:00
time_out 14:00
row 3
time_in 15:00
time_out 16:00
Hi,
I have a scenario, where I have a string column from database with value as "FTW*Christopher,Lawson|FTW*Bradley,James". In my report, I need to split this column at each " | " symbol and place each substring one below the other in one row of a report as shown below .
"FTW*Christopher,Lawson
FTW*Bradley,James"
Please let me know how can I acheive this?
I have a database field which consists of a long string of values with some separator.
Ex:Â Injection^!@$#Medication
in my report i have to split the string as
Injection
Medication
till here i am able to display the results but in addition to that i have to display check box against these values like below
and this string can contain any no of values ex: if we have 4 values are separated within a string then i have to display 4 check boxes against 4 results.
I'm dealing with a problem.
The record information example
DateTimeStart , DateTimeEnd , action , duration (seconds)
2007-02-02 10:30:22 , 2007-02-02 11:30:22 action1 , 600
what i want is for every half hour between start and end a record
10.30 action1
11.00 action1
11.30 action1
how can i create this, i'm a little stuck on this
I have a table with a varchar column that is delimited by char(227)+char(228)
i.e.,
OrNo=7807ãäSeqNo=1ãäPStopType=PãäPCity=TillsonburgãäPSt=ONãäPZIP=N4G4J1ãäPAdr1=10 ROUSE STREETãäPAdr2=ãäPLat=42.8625ãäPLon=-80.7267ãäDStopType=DãäDCity=GaffneyãäDSt=SCãäDZIP=29341ãäDAdr1=121 PAN AMERICAN DRIVE
Looking for split function that accepts a multiple character value as a delimiter?
How to split a column data into multiple rows, below is the requirement...
Create table #t3 (id int, country (varchar(max))
INSERT #t3 SELECT 1,' AU-Australia
MM-Myanmar
NZ-New Zealand
PG-Papua New Guinea
PH-Philippines'
Output should be like below
1 ,AU-Australia
1,MM-Myanmar
1,NZ-New Zealand
1,PG-Paua New Guinea
1,PH-Phlippines
Note: we are getting source data from sqlserver tables.
I googled and found below way but did't get the output as required
SELECT A.id, a.country,
Split.a.value('.', 'VARCHAR(500)') AS String
FROM (SELECT id, country ,
CAST ('<M>' + REPLACE(country, ' ', '</M><M>') + '</M>' AS XML) AS String
FROM #t3) AS A CROSS APPLY String.nodes ('/M') AS Split(a);
I have a table called BidItem which has another table calledBidAddendum related to it by foreign key. I have another table calledBidFolder which is related to both BidItem and BidAddendum, based on acolumn called RefId and one called Type, i.e. type 1 is a relationshipto BidItem and type 2 is a relationship to BidAddendum.Is there any way to specify a foreign key that will allow for thedifferent types indicating which table the relationship should existon? Or do I have to have two separate tables with identical columns(and remove the type column) ?? I would prefer not to have multipleidentical tables.
View 26 Replies View RelatedI need formulating a view through which I can create a an output like below image -
Monthly Table
NUM STATUS ACTIVITYCODE
HAX603 Completed 0x45845a
HAX317 Completed 0x112z44
HAX465 Completed 0x1155x4
HAX523 Completed 0x124c69
Season Table
NUM STARTMONTH STARTDAY ENDMONTH EMDDAY
HAX603 JULY 1 OCTOBER 31
HAX317 DECEMBER 1 DECEMBER 31
HAX317 MARCH 1 MARCH 31
HAX317 July 1 July 28
[Code] ...
Final OutputÂ
NUM STATUS ACTIVITYCODE <SEASONS>
HAX603 Completed 0x45845a 1 JULY - 31 OCTOBER, 1 DECEMBER - 31 DECEMBER
HAX317 Completed 0x112z44 1 DECEMBER - 31 DECEMBER, 1 MARCH - 31 MARCH, 1 July - 30 July
HAX465 Completed 0x1155x4 1 MARCH - 31 MARCH, 1 July - 28 July, 1 August - 30 August
HAX523 Completed 0x124c69 1 November - 30 November
I have written a query to join the values of multiple field, but lacking in as how will I formulate a view which will check for the duplicate values of Num fields and merge there values in a single field like season.
select num, (CAST(startday AS VARCHAR(3)) + ' ' + Â startmonth + ' - ' + CAST(endday AS VARCHAR(3)) + ' ' + Â endmonth)AS Season from seasons;