Im trying to import tables, stored procedures and data form another sql
2000 instance on my network to my local. After i go
through the steps, it ends up creating hte tables, but none
of the data is pulled over
Installation of MSDE 2000 fails on 64-bit Windows Vista (Build 5308).
The error message is "Setup failed to configure the server.Please refer the error logs for more information". No error log can be found on the machine at the time of installation. Please let me know if anyone else has encountered this problem?
Is it possible to install MSDE 2000 on 64-bit Windows Vista(Build 5308)?
Thanks in advance.
A view named "Viw_Labour_Cost_By_Service_Order_No" has been created and can be run successfully on the server.
I want to import the data which draws from the view to a table using SQL Server Import and Export Wizard.
However, when I run the wizard on the server, it gives me the following error message and stop on the step Setting Source Connection
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Error)
Messages
Error 0xc020801c: Source - Viw_Labour_Cost_By_Service_Order_No [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
(SQL Server Import and Export Wizard)
Exception from HRESULT: 0xC020801C (Microsoft.SqlServer.DTSPipelineWrap)
- Setting Destination Connection (Stopped)
- Validating (Stopped)
- Prepare for Execute (Stopped)
- Pre-execute (Stopped)
- Executing (Stopped)
- Copying to [NAV_CSG].[dbo].[Report_Labour_Cost_By_Service_Order_No] (Stopped)
- Post-execute (Stopped)
Does anyone encounter this problem before and know what is happening?
Thanks for kindly reply.
Best regards,
Calvin Lam
I was trying to install the MSDE 2000 from the Office XP CD in Windows XP Pro. In the middle of the installation, it rolls back, does not give any message and the installation fails. :confused: What could be the problem? Please help me with this
I am trying to build a VB6.0 application with the msde as back end
Thank you
The installation of MSDE fails and I dont find any solution to get itwork. If I start the setup than a windows with the time bar appears andsays it will take 1 minute. After nearly 1 minute it closes the windowand gives no additional information. But I see that it generates firstall the directories and files in c:Programme but after the setup is endeverything is deleted. Nearly everything , I see a service"MSSQLServerADHelper" is still installed.Must everytime delete it via regedit.I am using WindowsXP SP1 with MDAC 2.8I get this at the end of the generated protokollafter I start setup with"setup SAPWD="mypasswort" SECURITYMODE=SQL /L*v D:/MSDELog.log"Property(C): StartupFolder = C:Dokumente und EinstellungenAllUsersStartmenüProgrammeAutostartProperty(C): ProgramMenuFolder = C:Dokumente und EinstellungenAllUsersStartmenüProgrammeProperty(C): StartMenuFolder = C:Dokumente und EinstellungenAllUsersStartmenüProperty(C): DesktopFolder = C:Dokumente und EinstellungenAllUsersDesktopProperty(C): FontsFolder = C:WINDOWSFontsProperty(C): GPTSupport = 1Property(C): OLEAdvtSupport = 1Property(C): ShellAdvtSupport = 1Property(C): Intel = 6Property(C): PhysicalMemory = 448Property(C): VirtualMemory = 805Property(C): AdminUser = 1Property(C): LogonUser = BILOAGAProperty(C): UserSID = S-1-5-21-1606980848-1563985344-1202660629-1003Property(C): UserLanguageID = 1031Property(C): ComputerName = JUSTLERProperty(C): SystemLanguageID = 1031Property(C): ScreenX = 1024Property(C): ScreenY = 768Property(C): CaptionHeight = 19Property(C): BorderTop = 1Property(C): BorderSide = 1Property(C): TextHeight = 16Property(C): ColorBits = 16Property(C): TTCSupport = 1Property(C): MsiNetAssemblySupport = 1.1.4322.573Property(C): MsiWin32AssemblySupport = 5.1.2600.1106Property(C): RedirectedDllSupport = 2Property(C): Time = 19:43:01Property(C): Date = 18.12.2003Property(C): Privileged = 1Property(C): USERNAME = BILOAGAProperty(C): COMPANYNAME = xxxProperty(C): DATABASE = C:DOKUME~1BILOAGALOKALE~1Temp5b2b57.msiProperty(C): OriginalDatabase = C:SQL2ksp3installSetupSqlRun01.msiProperty(C): UILevel = 3Property(C): ACTION = INSTALL=== Protokollierung beendet: 18.12.2003 19:43:01 ===MSI (c) (B0:20): Note: 1: 1708MSI (c) (B0:20): Produkt: Microsoft SQL Server Desktop Engine --Installationsvorgang fehlgeschlagen.MSI (c) (B0:20): Grabbed execution mutex.MSI (c) (B0:20): Cleaning up uninstalled install packages, if any existMSI (c) (B0:20): MainEngineThread is returning 1603=== Verbose logging stopped: 18.12.2003 19:43:01 ===It would be super if anyone can help me. Havent find any informationsabout this.*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedI am trying to upgrade a default instance of MSDE to Sql Express SP2 using command line parameters. The upgrade keeps failing with the message that another instance of SQL Server exists with that name. I am using the following parameters to indicate the upgrade:
UPGRADE=SQL_ENGINE
INSTANCENAME=MSSQLSERVER
It appears to be doing an install rather than an Upgrade. Anybody have any ideas why it is not executing the UPGRADE parameter?
I am attempting to import data from Microsoft Access databases to SQL Server 2000 using the DTS Import/Export Wizard. I have a few errors.
Error at Destination for Row number 1. Errors encountered so far in this task: 1.
Insert error column 152 ('ViewMentalTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 150 ('VRptTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 147 ('ViewAppTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 144 ('VPreTime', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Insert error column 15 ('Time', DBTYPE_DBTIMESTAMP), status 6: Data overflow.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Invalid character value for cast specification.
Could you please look into this and guide me
Thanks in advance
venkatesh
imtesh@gmail.com
I want to move my Access 2K database into MSDE. The Access UpsizingWizard crashes (a known bug wi A2K), so I'm using the followingsuggested method:Access --> New --> Project (Existing Database)This asks for the name of the .adp file to create and then launchesinto the Data Link Properties dialog box (so far so good) I select myMSDE server from the drop-down, enter the sa account & passwd, attacha database file and try to select the .adp file that was just created.Unfortunately, the "Select SQL Server Database File" dialog is lookingfor an .MDF file, not an .ADP file.If I try to kludge it and select the .adp file anyway, the TestConnection produces an error:"Test connection failed because of an error in initializingprovider. The header file "D: est.adp" is not a valid database fileheader. The FILE SIZE property is incorrect."Any suggestions on how to proceed?Note:I've got Access 2000 SP1, Visual Studio.Net 2002, MSDE and SQL WebAdministrator running on XP Prof SP2.
View 3 Replies View RelatedWindows XP, SP2; MSDE 2000 Release A - on some installs of the XP SP2 MSDE installation fails, the section of the install log that applies is:
View 3 Replies View RelatedCan you install Sql Server 2000 Developer Edition with MSDE 2000 release A already installed?
View 2 Replies View RelatedMy objective is to use Enterprise Manager to move (copy) my SQL db from the server to my windows desktop computer.
I downloaded MSDE and am having trouble installing it, no doubt because I do not understand the documentaion (ReadMeMSDE2000A.htm).
When I try to run setup, I get that message that says:
"A strong SA password is required for security reasons. Please use SAPWD switch to supply the same."
Considering my purpose, do I need a "strong" SA password? If not, how do I get around it? If yes, how do I set it up?
I am a Mac user so I have poor windows skills, please make it as painless as possible for me, thanks!
Ron
venu writes "Hi,
Am very new to MS SQL adminstration
Can anybody help me out how to work on Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) Release A just for the practice.
The activity which am going to workout on MSDE is below.
How to install SQL(on XP)
How the layout will be(like if i insall MSDE what are all Application will be and how they depends on each other)
How to create/delete tables if so, how can we do it either by GUI or CUI
just i need a clarifications reg same
Thank you,
venu"
Parameter
Access 2000/XP
SQL Server 7.0
SQL Server 2000
MSDE 2000
Number of instances per server
n/a
n/a
16
16
Number of databases per instance / server
n/a
32,767
32,767
32,767
Number of objects per database
32,768
2,147,483,647
2,147,483,647
2,147,483,647
Number of users per database
n/a
16,379
16,379
16,379
Number of roles per database
n/a
16,367
16,367
16,367
Overall size of database (excluding logs)
2 GB
1,048,516 TB
1,048,516 TB
2 GB
Number of columns per table
255
1024
1024
1024
Number of rows per table
limited by storage
limited by storage
limited by storage
limited by storage
Number of bytes per row
(Excluding TEXT/MEMO/IMAGE/OLE)
2 KB
8 KB
8 KB
8 KB
Number of columns per query
255
4,096
4,096
4,096
Number of tables per query
32
256
256
256
Size of procedure / query
64 KB
250 MB
250 MB
250 MB
Number of input params per procedure / query
199
1,024
2,100
2,100
Size of SQL statement / batch
64 KB
64 KB
64 KB
64 KB
Depth of subquery nesting
50
32
32
32
Number of indexes per table
32
250 (1 clustered)
250 (1 clustered)
250 (1 clustered)
Number of columns per index
10
16
16
16
Number of characters per object name
64
128
128
128
Number of concurrent user connections
255
32,767
32,767
5
I previously used MSDE as my web database, but now I've installed SQL Server Enterprise 2000 into my server. My question is how I can import data from MSDE to my new SQL server? I don't wanna lose all the data.
Thank you!
I am trying to copy updated tables from a DB on a remote SQL server tomy pc using import wizard. I choose "copy objects and data between SQLServer databases". On the screen "Select objects to copy", all of theoptions are unchecked/blank including the script location. Clicking"select objects" causes the wizard (and enterprise manager) to crash.An error message refers to mmc.exe. Any ideas?
View 1 Replies View RelatedI'm new to DTS packages, but managed to create one that successfully empties a table in SQL Server then imports data from a Foxpro file on another server into it. It runs fine if I execute it from DTS, but fails if I schedule it to run in SQL Server Agent (using the "Schedule Package" option in DTS). I think the relevant portion of the error returned when the job fails is:
Error string: [Microsoft][ODBC Visual FoxPro Driver]File 'hrpersnl.dbf' does not exist.
The file does exist. I also tried to execute it from a stored procedure, but got a similar error. Any thoughts on why it runs one way but not the other?
TIA
Hi All,
I recently was required to change the name of my machine, where SQL Server 2005 (Enterprise) was installed. I then tried to open a pre-change database, and SQL Configuration Manager gave me an error saying it "...could not obtain information about Windows NT/user..." Upon further digging, the Properties->Permissions of that particular database is tied to the old computer name. Eveything else seems to have updated to the new name, and I can't seem to figure out a way to change the old reference.
Help!
kinso
Hello,
I have the following scenario, and my main question is why Excel Formatted file errors out while TXT formatted file does not? Any workaround would be helpful, but I do want to avoid dtexec, and still want to manage it as SSIS.
MAIN ISSUES - permission issue & excel connection issue
SSIS Package Run Directly (not SQL Job, not automated)
* Every format and and folder location works!
Package Run under SQL JOB
TXT Format
A. Project Folder - GOOD
B. Client Folder - FAILS!
Conclusion - TXT Format works, but Client Folder does not have sufficient permission for PRODsvcSQLDMS
EXCEL Format
A. Project Folder - FAILS!
B. Client Folder - FAILS!
Conclusion - EXCEL Format DOES NOT work. Maybe SSIS Excel Connection Bug.
SQL Build 9.00.2153.00
-Lawrence
Im getting the following error when I try to export from Oracle 9i and import into SQL Server 2005 using Oracle and SQL OLE DB Provider's respectively.
Cannot retrieve the column code page infor from the OLE DB Provider. If the component supports the "DefaultCodePage" property, the code page from that property value will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
I know there is a way to change the property settings for the OLE DB Provider in the Data flow section of the development studio BUT ...
1) Is there a way to change this outside of the development studio?
2) I can't create the package to setup in the studio because even when I uncheck execute immediately and check save package, it still fails and never creates anything.
Any help is much appreciated
Thanks
Scott
Will any application developed against SQL Server 2000 Developer
Edition work on an identical platform with only MSDE 2000 installed? I
understand there's a concurrency limit with MSDE 2000 of around 25 (and there's no GUI) but apart
from that, are there any aspects of SQL Server 2000 functionality (from the .NET applicaiton code's point of view) that
are "disabled" in MSDE 2000?
Trying to transfer databases from MSDE to SQL. When I use SQLEnterprise Manager - DTS - import or export, it works for the firstdatabase, but then fails for the others. I select the to and fromdatabases using DTS - Import - 'MS OLE DB Provider for SQL Server',then select 'Copy objects and data between SQL Servers'. It failswith the generic error message: 'Copy objects failed', nothingfurther. I tried to just copy data, and it doesn't work totally. Ontwo databases, it said that it copied everything, but when I go inunder Enterprise manager, some of the tables are incomplete, i.e. nodata, table shows up in the list, but if you try to look at it, itsays that it is missing or empty. Also, one table was not evencopied. In the other two cases, I get errors, does not copy alltables. I get errors, like insert fails, but the column it referencesfor the table does not even exist in that table. Any suggestionswould be appreciated.
View 2 Replies View Relatedi went through the documentation but i was not clear on following, here is the scenario :-
a Central server is having SQL Server 2000
3 Remote Locations :- Each having 4-5 no of computers, connected on a Lan, and on one of the machines MSDE 2000 will be running.
My Questions are :-
1. Can remote locations, update data locally and send changes (say in every one hour) to central server. If yes, then how ??
2. Same way they can receive updates from Central Server on whatever was updated on Centra Server or on the 3 remote locations. If yes, then How ??
any help will be highly appreciable.
I am creating an install program and I'm wondering if there is a
difference between SQL Server 2000 and MSDE 2000? Do they have
different entries in the Registry?
From the documentation that I've read it seems as if they are one and the same.
However, if someone knows how to differentiate between them in the Registry it would be greatly appreciated.
Thanks
More SSIS woes. DTS was so much easier.
I have a flat file. It's fixed-with with CRLF record delimiters (a.k.a. Ragged Right format).
Some fields are null, and represented by the text NULL.
I'm trying to import the file into SQL via an OLE DB connection. The target table is a SQL 2000 data table. Two of the fields in the target database are of type smallint.
When I run PREVIEW on the data source (Flat File), everything looks good & correct. I added the convert columns task to convert my strings to smallint. This is where things go haywire.
After linking everything up, the conversion gives me a "Cannot convert because of a possible loss of data." All of my numbers are < 50, so I know this isn't the case. Another SSIS bogus error
My first instinct is the SSIS doesn't understand that NULL means null. I edited the file and replaced all instances of NULL with 4 emtpy string chars. Still no good. It seems to be having a hard time parsing the file now.
I dropped the convert task and tried editing the data source, and set the two smallint fields to smallint instead of string (SSIS formats). I get the same conversion error.
Changing the NULL values to 0 fixed the problem, but they're not 0. They're null.
Short of creating another script that converts all zeros to NULL using the aforementioned hack, I'm out of ideas.
I'm I missing something or is SSIS just incapable of handling nulls in fixed-width flat file formats?
TIA
It seems to me that files created on Unix machines with line terminator , or chr(10), cannot be imported using the Bulk Insert statement. Is this a bug, or an oversight by Microsoft? Does this mean that unless one replaces all with
, there is no way to use Bulk Insert to import Unix files? This is a very strange behavior by MSSQL. Even lessor programs such as Excel and Word automatically recognize chr(10) as a line termination character. Am I missing something, or is this just the way MSSQL is?
I am about to setup an application server. This app will generate reports and instead of just having a HTML page up, I am considering running dotnetnuke type portal to offer the userbase a better interface for the reports, info, announcement, etc.
Server isn't too bad (2x1.7Ghz Xeon I think, 2GIG RAM) type of setup (may be little more or less). App doesn't require as much resources, but we are planning for the future )
While I have some resource to play with, I also need to make sure I don't load much that may impact the application performance. In my experience, SQL Server 2000 will take a lot of resources even when not used as much. So I am considering MSDE.
I am curious however, WHAT ARE THE MAIN DIFFERENCES BETWEEN SQL 2000 Server Vs MSDE 2000 ?
Beside no Client tool and mostly command line specific command, what else there to convince that I should go for server vs desktop engine?
Now our company has Enterprise license for SQL, so I am not worried about the cost (well a little maybe), but mostly wondering about performance.
If you think of any reason why I go to SQL Server 2000 over MSDE, please let me. Otherwise, I think MSDE in this case is the appropriate RDBMS to go for.
Regards,
Impu
Hi,
How does one install MSSQL 2000 on a machine that's already running MSDE 2000? Do i need to unintstall MSDE, or both can be installed seperately??
Is there a way to simply upgrade MSDE into MSSQL 2000?
Thanks!
Hi There,
I have install msde in one computer and try to register from my sql server, the following error message is coming.
A connection could not be established to Cal-itimilsina (computer in which MSDE IS INSTALLED)
RESON: SQL SERVER DOES NOT EXIST OR ACCESS DENIED
CONNECTIONOPEN(CONNECT())
====
BUT THE MSDE IS RUNNING IN THE CLIENT MACHINE. Could any one please help me
Thanks.
Indra.
Hello all, im new here and do not have no experience with sql. I am trying to install a tax software that I need to run my little business. When I install it gets to a popint that it asks me for my SQL server usernme and password. I remember doing this last year and I reinstalled MSDE and set up a username and password. I seem to not remember what I used, i tried all that I would have but can not get past that step.
I remember adding some lines in the setup,ini file when I installed it last year. Now I can go ahead and reinstall it again and set up a new one, but will the uninstalling and reinstalling of MSDE affect my previous software from last year? Its the same software but I need this years installed.
I have tried using sa as the username and a blank password, with a password and others that I have read up on, still cant log on. Keep getting worng credential screen.
Is there a way to get that info, i doubt it or else it would not be secure, or can I just simply reinstall MSDE?
Many thanks!!
Did anybody tried to use this as a database server? Is there an administration interface somewhere which is free?
Dennis
I'm trying to install this application but i get an errorSetup failed to configure the server. Refer to the server error logs and setup error logs for more information.I'm running Windows XP SP2.Could my SP2 be causing me problems considering I successfully installed it previously.Many thanks
View 1 Replies View RelatedI am not sure if this is the right forum, I already had some one freakout on me in another forum about posting in the wrong place.
Anyway:
I would like to upgrade a machine from SQL 7 to MSDE 2000. I would like to keep the existing database from Altiris Deployment solutions intact. Is this upgrade possible?
Any help would be appreciated
This is my first time using SQL. I installed MSDE 2000 on my desktop and after restarting my PC I see an icon in the startup area MSSQLServer with the server being my T-Tag #.
I am trying to upsize my Access DB to Sqlserver. I am still confused as to where does this server reside? How does this whole thing work?
Also, when I tried to upsize my db I got an overflow error.
Could someone please explain how does this work?
Thanks,
DH