MS SQL Server :: Sql 2005 Cluster Setup Fails

SQL Cluster Setup Fails After Installing Service Pack 2

May 28, 2000

We have successfully been using MSCS with MSSQL7 (SP1) running under NT4 EE
(SP6a), installed in an active/active configuration using, two DELL
PowerEdge 6350 machines. Recently I installed MSSQL7 (SP2), I followed the
instructions that came with SP2, and unclustered the SQL nodes using the
Failover Cluster Wizard, and installed SP2, this was uneventful, and
appeared to install correctly. Next I tried to recluster the SQL nodes
using the Failover Cluster Wizard as directed. This failed with: "Could not
run setup on remote machine. SQL Cluster Setup failed." So I began the
usual research using the usual resources, and have found articles that
discusses this error, and the things to look for when it happens. I have
exhausted all suggestions without success. I appear to have everything
correctly configured. I have enabled Cluster Logging (level 3), following
are the two things I have found that indicate something is wrong:

1. In the SQL Error Log the following gets logged when I run the wizard:
"Attempting to initialize Distributed Transaction Coordinator."
"Failed to obtain TransactionDispenserInterface:
XACT_E_TMNOTAVAILABLE"

2. In the Cluster Log I see the following message repeatedly:
"[ClRtlCopySecurityDescriptor] MakeSelfRelativeSD failed,
0x00000551"

3. In the sqlclstr.log I see the following, without an indication of
which file is missing:
"[reghelp.h:235] : 2 (0x2): The system cannot find the file
specified."
"[clushelp.cpp:166] : 259 (0x103): No more data is available."
"[validate.cpp:147] DeleteTestGroup:OpenClusterResource: 5007
(0x138f): The cluster resource could not be found."
"~~~ XXX InstallRemote failed"

Does anyone have any ideas about what could be causing this problem?
Many thanks in advance.

Christpher Cutts
LifeMasters Supported SelfCare

View 1 Replies View Related

SQl 2005 Setup Failure For Cluster

Oct 19, 2006

Installing SQl2005 into on Win2003 2 node cluster, at the very end of the
setup receive a message 'Remote Setup failed'. Referred to some sql logs
and found this;
Error: Action "LaunchLocalBootstrapAction" threw an exception during
execution. Error information reported during run:
"C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe"
finished and returned: 1603
Aborting queue processing as nested installer has completed
Message pump returning: 1603

I've seen some similar errors on the web and suggestions about the Task
Scheduler being started on both nodes, but I ensured these were both started
before the install. SQL2005 does seem to be ok on the node1 where the
install was made, but fails when trying to failover to node 2.

Any help would be much appreciated here.

Thanks
Darren

View 1 Replies View Related

We Need Recommendation For SQL 2005 Setup (cluster)

Nov 20, 2007

We are setting up a SQL 2005 cluster at our ISP and would like some feedback from anyone or DBAs for the pros and cons for the following setups.

Option 1.
http://img3.freeimagehosting.net/image.php?d2e8e7e923.gif

Option 2.
http://img3.freeimagehosting.net/image.php?11742dda91.gif

Basically, we need to know which set up is the preferred method.

View 3 Replies View Related

Setup Sql 2005 Fails On New XP-Pro

Jul 17, 2007

... Dear All,

I am trying to install the professional edition of SQL Server 2005 on a new PC with xp pro. I have tried several times with several options but the installation is stalled with the error message that "The drop location is missing file(s) that allow setup to determine how a multi instance product should be installed. Setup cannot continue, please repair the drop and try again."

Does anyone know what the probelm is and how to fix this?

Thanks!

View 1 Replies View Related

SQL 2005 X64 Setup Fails

Jun 1, 2006

Below is the error message receive when installing SQL 2005 (x64) enterprise edition.

Failed to install and configure assemblies c:Program Files (x86)Microsoft SQL Server90NotificationServices9.0.242Binmicrosoft.sqlserver.notificationservices.dll in the COM+ catalog. Error: -2146233087

Error message: Unknown error 0x80131501
Error description: The transaction has aborted

Has someone seen this before? Any pointer is appreciated. Thanks.

View 6 Replies View Related

SQL Server 2005 Fails While Installing On A Cluster.

Jan 23, 2006

I'm building an SQL Server 2005 cluster on a Windows 2003 cluster. Windows 2003 cluster and MSDTC service are all up and running properly. No problems there, but when I try to install SQL Server 2005 as a cluster service, it fails. The installation goes past the stage where it validates both the nodes and doesn't find any issue there, but when it tries to install fiels it fails. It fails on node 2. When I checked the scduled installer job it creates on node2 to install, the job never seems to run and fails. I'm using only one user account to setup windows cluster MSDTC and SQL Server. Now the complications: It is 64 bit Windows 2003 and SQL Server 2005. Also, the node 1 is built to be a domain controller as well.

Any help will be highly appreciated.

View 8 Replies View Related

Cluster Failover Setup With Virtual Server 2005 R2 Sp1.. Question...

Dec 28, 2007

Curious on how this will work.. if i install sql 2005 standard edition on one virtual server.. to a fixed disk (actually 2 fixed disks.. one for C, one for D).. then install another 2005 standard edition on another virtual server.. do i just rerun the setup and suddenly the failover cluster option will NOT be greyed out?

Can anyone comment on this?

Thanks in advance.

View 4 Replies View Related

Sql Server 2005 Setup Fails On Windows XP SP2

Jul 17, 2007

I am facing a problem while installing Sql server 2005 Developer edition on Windows XP Professional SP 2 , It says Cannot install native client use correct SQLCLNI.msi file and Native client installation fails also the set up for client tools fails.

Any help will be greatly appreciated.

Pankaj Joshi

View 1 Replies View Related

SQL Server 2005 Developer Edition Setup Fails

Nov 5, 2007

Hi,

I'm installing SQL 2005 Developer Edition, instalation always fails with the error "Could not find a package to install on the installation media". The summary.txt is pasted bellow:

Microsoft SQL Server 2005 9.00.1399.06
==============================
OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Time : Mon Nov 05 10:47:30 2007

IA-PJPATRICIO : Could not find a package to install on the installation media.

SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%Microsoft SQL Server90Setup BootstrapLOGSummary.txt.

Time : Mon Nov 05 10:50:43 2007

List of log files:
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0002_IA-PJPATRICIO_Core(Local).log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0002_IA-PJPATRICIO_Datastore.xml
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0002_IA-PJPATRICIO_.NET Framework 2.0.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0002_IA-PJPATRICIO_Core.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGSummary.txt
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0002_IA-PJPATRICIO_.NET Framework 2.0 LangPack.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0002_IA-PJPATRICIO_.NET Framework Upgrade Advisor.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0002_IA-PJPATRICIO_.NET Framework Upgrade Advisor LangPack.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0002_IA-PJPATRICIO_.NET Framework Windows Installer.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0002_IA-PJPATRICIO_.NET Framework Windows Installer LangPack.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0002_IA-PJPATRICIO_Support.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0002_IA-PJPATRICIO_SCC.log
C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0002_IA-PJPATRICIO_WI.log

I have an instance of SQL 2000 installed on the same machine, i'm trying to install Analises Services 2005 only, but instalation fails with any of the SQL Server 2005 components.

Can anyone help?

Thanks

View 5 Replies View Related

SQL Server 2005 Evaluation Edition Setup Fails!

Nov 27, 2006

When I try to install SQL Server 2005 evaluation edition, I keep getting the message that SQL server setup has detected beta components of SQL Server 2005 or Visual Studio 2005 which must be uninstalled for setup to continue. I have removed all beta components like sql 2005 ctp, visual studio 2005 beta, etc from my computer and yet it keeps giving me this message.

PLease help!!!! I am unable to install SQL Server 2005 evaluation edition.

View 1 Replies View Related

Sharepoint Upgrade Fails During First Time Sql 2005 Workgroup Ed. Setup

Dec 21, 2007

I have installed SBS 2003 Premium with Exchange 2003 SP1 and now I want to install SQL server 2005 workgroup edition.

Heres what I noticed during setup, following the steps of the Server 2005 Workgroup Edition instructions, starting with Upgrading the Sharepoint instance of WMSDE.

Preparing the http://companyweb website:
Step 4. I should make a backup of the data directory within program filesMicrosoft SQL ServerMSSQL$SHAREPOINT directory. However there is no data-directory there, so nothing to backup there. This is probably the reason for all the rest of the issues, however what does it mean, why is there no such directory present? I checked before doing the sql install that by going to http://companyweb I did indeed land on the sharepoint internal website.

Rest goes all normal, until :
Attaching the databasefiles to the new SHAREPOINT instance of SQL server 2005.

Step 4.: go to MSSQL$SHAREPOINTdata. Not only is there no such subdirectory now, the whole MSSQL$SHAREPOINT directory has in fact now disappeared. So steps 4 till 6 cannot be performed now.

Then further to
Enable full text search in Windows Sharepoint services
Step 2. Remark: I get the error message as described there, however the solution would be to start the SQL server (Shareoint service. However that service is up and running

Furthermore when I go to http://companyweb now, I also get the errormessage indicating no connection can be established with the configuration database.

When I check for services, I find that the whole MSSQL$SHAREPOINT service has disappeared from the list of services.

View 3 Replies View Related

Setup And Upgrade :: Cluster Installation Failed On Adding Node To Cluster

Oct 10, 2015

During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .

1<sup>st</sup> Method…

1. Open console command (Run->CMD with administrator privileges).

2. net stop winmgmt

3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).

4. net start winmgmt

2<sup>nd</sup> Method..

1. Disable and stop the WMI service.

a) Command : - sc config winmgmt start= disabled

b. Command : -                 net stop winmgmt

2. Run the following commands.

a). Command: Winmgmt /salvagerepository %windir%System32wbem

b). Command: Winmgmt /resetrepository %windir%System32wbem

3. Re-enable the WMI service

Command:          sc config winmgmt start= auto

Last command to run after above steps

4. Command:     mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"

File not found Error for above command.

View 3 Replies View Related

Setup And Upgrade :: Can Build Cluster By Adding Cluster Service

Jul 6, 2015

Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.

View 4 Replies View Related

SQL Server 2005 Express Adv. SP2 Setup Fails To Install SQL Server Database Serices Only.

Mar 26, 2007

I run setup using GUI. It upgrades all components of the existing installation w/out any problems except the last component. That is, it proceeds with the installation of SQL Server Database Serices and at the end fails to shut down the SQL Server and aborts the installation reporting the following:

"Service 'Computer_NameSQLEXPRESS' could not be stopped. Verify that you have sufficient privileges to stop system services. The error code is (16386)".

I am running Windows XP SP2 with both .NET 2.0 and .NET 3.0 installed on it. I am logged in as a system administrator.

The most puzzling to me things are:

- the setup starts AND STOPS w/out any problems SQL Server Reporting Services and SQL Server VSS Writer (thus finding enough privileges for both).

- the setup starts the SQL Server w/out any problems (thus it finds enough privileges to START A SYSTEM SERVICE) and then fails as described above 'lucking privileges".

During installation before failing the setup displays following:

"Run as Normal User. RANU instance Shutdwon in progress: MSSQL$SQLEXPRESS". The "normal user" puzzles me too, unless the SQL Server itself is meant here.

Any suggestions would be appreciated. I can provide the installation log file as well.

Thanks.

View 5 Replies View Related

Cluster Setup

Dec 5, 2006

We are on SQL Server 2000 A/A cluster and are moving to SQL Server 2005 cluster.

Following are the list of things before proceeding, please let me know if it needs any corrections and add-ons:

(side-by-side) Planning for new installation of SQL Server 2005 ( SQL2005INST1 and SQL2005INST2) on node1 and node2 and restoring the databases on SQL2005INST1 and SQL2005INST2 from respective 2000 instances.

1) SQL2005INST1

SQL Network Name

SQL IP address

2) SQL2005INST2

SQL Network Name

SQL IP address

As 2000 is already existing on the cluster.Want some clarity on following questions.

Can I keep the data files on the same disk as 2000 was using ?

Do I need to have new disk for the Quoram drive?

Under "Virtual Server Configuration" wizard during the setup under "Network to use"--- for "private cluster network" and "public cluster network" do that IP Address and network address and network subnet will be different from what we gave for SQL 2000.

Thanks

ITTECH

View 4 Replies View Related

Multiple Instances Cluster Setup

Mar 21, 2002

Hi,

I have 2 W2K box's and want to install 4 SQL servers on each box & each different character set and want to setup clustering (Active - passive).

Do any one of you setup this type environment ?, Pl. let me know if you have any suggestions ..

Regards,

Madhu

View 1 Replies View Related

SQL 200 Setup Will Not Run On Windows2003 IA64 Cluster

Jan 24, 2008

Ok Here is the story with hopefully all the details.
I had a single node cluster Itanium server running W2k3 IA 64 Ent. SP2 with 2 x sql2000 ent sp4 and 1 sql2005 sp1 instances installed and a clustered file share.
All is well with them.
I attempted to add an additional node to my cluster which started out fine but when I tried to run the sql2000 setup to add this node, there are no warning or errors. Its a silent failure.
I tried many different scenarios but the results are the same. I evicted the node and then tried to run the setup on the evicted node. The setup ran without error. I tried to run setup on my single node cluster and it fails in the same manner. I read and read and from the sqlstp.log this is what I find. Does anyone have a clue what is wrong? i have check all my permissions but I can't put my finger on what it could be.Help Help.

1
<Func Name='InitDataFolder'
<EndFunc Name='InitDataFolder' Return='0' GetLastError='18'>
<Func Name='DetectComputers'>
1
<Func Name='DetectVersionOnMachine'>
NYCTDB04 D:SQL Server ENT 2000 - 64 BitSetupIA64inn 1
<Func Name='InsertVersionRecord'>
NYCTDB04 MSSQLSERVER 0 8.00.760 1033 0 3 1804890536 Enterprise Edition (64-bit) 2099209 1 NYCTDB41 0 1
<EndFunc Name='InsertVersionRecord' Return='0' GetLastError='183'>
<Func Name='InsertVersionRecord'>
NYCTDB04 BIZTALK 1 9.00.2047.00 1033 0 -1 -1 (64-bit) 133124 0 0 1
<EndFunc Name='InsertVersionRecord' Return='0' GetLastError='183'>
<Func Name='InsertVersionRecord'>
NYCTDB04 MYOFFICE 2 8.00.760 1033 0 3 1804890536 Enterprise Edition (64-bit) 2230280 1 NYCTDB42 0 1
<EndFunc Name='InsertVersionRecord' Return='0' GetLastError='183'>
<Func Name='InsertVersionRecord'>
NYCTDB04 SHARED_TEMP 3 8.00.760 1033 0 3 1804890536 Enterprise Edition (64-bit) 2230276 0 0 1
<EndFunc Name='InsertVersionRecord' Return='0' GetLastError='183'>
<EndFunc Name='DetectVersionOnMachine' Return='0' GetLastError='183'>
<Func Name='InsertComputerNameRecord'>
NYCTDB04 0 50010 539101189
<EndFunc Name='InsertComputerNameRecord' Return='0' GetLastError='183'>
<EndFunc Name='DetectComputers' Return='0' GetLastError='0'>
<Func Name='DetectIpResources'>
<Func Name='InsertIpResourceRecord'>
_sql$IpResources 0 144.210.119.64 255.255.255.224 Public
<EndFunc Name='InsertIpResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='DetectIpResources' Return='0' GetLastError='183'>
<Func Name='DetectGroupResources'>
<Func Name='EnumerateGroupResources'>
SQL 2000 Shared Group(NYCTDB41) NYCTDB04 Disk Q: 0
<Func Name='GetDiskResourceLetters'>
SQL 2000 Shared Group(NYCTDB41) Disk V 0
<Func Name='InsertDiskResourceRecord'>
Disk V 0 V SQL 2000 Shared Group(NYCTDB41)
<EndFunc Name='InsertDiskResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetDiskResourceLetters' Return='0' GetLastError='183'>
<Func Name='GetDiskResourceLetters'>
SQL 2000 Shared Group(NYCTDB41) Disk W 1
<Func Name='InsertDiskResourceRecord'>
Disk W 1 W SQL 2000 Shared Group(NYCTDB41)
<EndFunc Name='InsertDiskResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetDiskResourceLetters' Return='0' GetLastError='183'>
<Func Name='GetVSInfo'>
SQL 2000 Shared Group(NYCTDB41) NYCTDB04 0
<Func Name='EnumVSIPResources'>
NYCTDB41
<Func Name='InsertIpResourceRecord'>
NYCTDB41 0 144.210.119.88 255.255.255.224 Public
<EndFunc Name='InsertIpResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumVSIPResources' Return='0' GetLastError='183'>
<Func Name='EnumVSResourceOwners'>
NYCTDB41
<Func Name='InsertVSNodeInfoRecord'>
NYCTDB41 NYCTDB04
<EndFunc Name='InsertVSNodeInfoRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumVSResourceOwners' Return='0' GetLastError='183'>
<Func Name='InsertVSInfoRecord'>
SQL 2000 Shared Group(NYCTDB41) 0 NYCTDB41 MSSQLSERVER 1 D:Program FilesMicrosoft SQL Server V:Program FilesMicrosoft SQL Server ipgnasharedsql.service ipgnasharedsql.service
<EndFunc Name='InsertVSInfoRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetVSInfo' Return='0' GetLastError='183'>
<Func Name='InsertGroupResourceRecord'>
SQL 2000 Shared Group(NYCTDB41) 0 0 NYCTDB04
<EndFunc Name='InsertGroupResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumerateGroupResources' Return='0' GetLastError='183'>
<Func Name='EnumerateGroupResources'>
Cluster Group NYCTDB04 Disk Q: 1
<Func Name='GetDiskResourceLetters'>
Cluster Group Disk Q: 0
<Func Name='InsertDiskResourceRecord'>
Disk Q: 0 Q Cluster Group
<EndFunc Name='InsertDiskResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetDiskResourceLetters' Return='0' GetLastError='183'>
<Func Name='InsertGroupResourceRecord'>
Cluster Group 1 1 NYCTDB04
<EndFunc Name='InsertGroupResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumerateGroupResources' Return='0' GetLastError='183'>
<Func Name='EnumerateGroupResources'>
SQL 2005 Biztalk Group(NYCTDB40) NYCTDB04 Disk Q: 2
<Func Name='GetDiskResourceLetters'>
SQL 2005 Biztalk Group(NYCTDB40) Disk T 0
<Func Name='InsertDiskResourceRecord'>
Disk T 0 T SQL 2005 Biztalk Group(NYCTDB40)
<EndFunc Name='InsertDiskResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetDiskResourceLetters' Return='0' GetLastError='183'>
<Func Name='GetDiskResourceLetters'>
SQL 2005 Biztalk Group(NYCTDB40) Disk U 1
<Func Name='InsertDiskResourceRecord'>
Disk U 1 U SQL 2005 Biztalk Group(NYCTDB40)
<EndFunc Name='InsertDiskResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='GetDiskResourceLetters' Return='0' GetLastError='183'>
<Func Name='GetVSInfo'>
SQL 2005 Biztalk Group(NYCTDB40) NYCTDB04 2
<Func Name='EnumVSIPResources'>
NYCTDB40
<Func Name='InsertIpResourceRecord'>
NYCTDB40 0 144.210.119.90 255.255.255.224 Public
<EndFunc Name='InsertIpResourceRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumVSIPResources' Return='0' GetLastError='183'>
<Func Name='EnumVSResourceOwners'>
NYCTDB40
<Func Name='InsertVSNodeInfoRecord'>
NYCTDB40 NYCTDB04
<EndFunc Name='InsertVSNodeInfoRecord' Return='0' GetLastError='183'>
<EndFunc Name='EnumVSResourceOwners' Return='0' GetLastError='183'>
<EndFunc Name='GetVSInfo' Return='1168' GetLastError='203'>
<EndFunc Name='EnumerateGroupResources' Return='1168' GetLastError='183'>
<EndFunc Name='DetectGroupResources' Return='1168' GetLastError='183'>
<EndFunc Name='PerformDetections' Return='1168' GetLastError='0'>

View 1 Replies View Related

Hoe To Setup Integration Services On A Cluster

Aug 24, 2006

Does anyone know how to install SQL 2005 integration services on a cluster machine?

I have an a-a cluster machine. Both nodes are using SQL 2005 naming instance. During the SQL installation, I did include integration services option as one of my setup items. The setup process was running fine but I can��t connect to integration services via MS SQL Server management studio. I see below errors:

��Invalid server name "TESTServerB123". SSIS service does not support multi-instance, use just server name instead of "server nameinstance".

Looks like I must use default instance for 2005 integration services. I re-ran the setup program and added a default instance on the same cluster node. (On that node I have one default instance and one naming instance). Now I can connect to the default SQL Server but when I click on ��stored packages�?, I don��t see file system and MSDB. It shows nothing at all. Any idea how to make integration services running on a cluster machine?

Thanks

View 5 Replies View Related

Recovery :: Failover Cluster Setup

May 8, 2015

I am using SQL 2012 SE with clustering on Windows server 2008 R2. Now I want migrate it to windows server 2012 with minimal down time. So I want to evict the passive node and add a new node with windows server 2012 and install sql server 2012 SE on the new passive node and perform a failover(make the node with 2012 OS as active) and then evict the new passive node and add another node with windows 2012 and then do the same thing?

View 12 Replies View Related

SQL Mail Setup Brought Down NT Cluster Server

Aug 15, 2000

I tried installing SQL Mail but it didnt work.
What happened was, when I was entering the SQLMail profile for an Exchange User name. It took those values. Now when we ran/initialize SQLMail service, the Cluster Services kept rebooting/re-initializing all the services. Therefore, system crash and will not provide any services any longer.
We tried resolving it by running the SQL services in node 2 and we got MSSQLServer v6.5 service running but the SQLExecutive service
will not start.
I tried to reset the permissions on the services and have
that SQLExecutive run on the NT Administrator account.

After reading a few technotes from MS and applying them.
None seem to have worked so far. Here are some of the technotes:
Q195761
Q158585
Q155697
Q155283

(1) How can we fix the SQLExecutive so it will autostart with bringing down the cluster
(2) What can we do to successfully run SQL mail on the cluster server with this all the variables in this situation.

View 1 Replies View Related

MS DTC Setup Failed To Populate The Shared Cluster

Mar 10, 2004

I appologize if I am posting this msg twice (newby), but I am getting this error msg in the app log.

MS DTC setup failed to populate the shared cluster
registry. The DTC resource will not be able to come
online.Error Specifics:
d:srv03rtmcomcomplusdtcsharedmtxclumtxcluse
tuphelper
.cpp:120, CmdLine: "C:WINDOWScluster
esrcmon.exe" -e
1208 -m 1212 -p 2132, Pid: 3636

Have anybody seen this msg and any ideas on what to do in this situation? Your timely assistance is much appreciated. Thanks,

View 5 Replies View Related

SQL 2012 :: Setup AlwaysOn On Existing Cluster?

May 19, 2015

We have an existing SQL Server 2012 Enterprise cluster with 2 nodes (active-active) and uses Windows 2008 R2 OS. We are looking for a way to increase HA as well as offload backups to secondary server and it was suggested that AlwayOn could be an option.

The questions I have are:

1) Is it possible to turn on AalwaysOn feature on an existing cluster?

2) If yes to above, does the secondary replica need to exist as a node on the same cluster or can it be on a completely different cluster?

3) If the secondary replica is on the same cluster (i.e. we add a 3rd node to existing 2 node cluster), can that node be provisioned with storage from a completely different SAN? (i.e. Node 1 and Node 2 accesses LUNs on SAN1 and Node 3 accesses LUNs on SAN2).

View 9 Replies View Related

Setup And Upgrade :: Cluster Installation Failed

Oct 8, 2010

when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..

View 12 Replies View Related

Recovery :: Setup FILESTREAM On Failover Cluster

Apr 22, 2015

I saw following point on Technet article about RBS.The local FILESTREAM provider is supported only when it is used on local hard disk drives or an attached Internet Small Computer System Interface (iSCSI) device. You cannot use the local RBS FILESTREAM provider on remote storage devices such as network attached storage (NAS).It looks like that we cannot use FILESTREAM on Failover Cluster because to setup Failover Cluster we need to have NAS. But then the NAS is made available locally for Failover Cluster so FILESTREAM should work right?Found another article which talks about setting up FILESTREAM on Failover Cluster. URL...

View 2 Replies View Related

Setup And Upgrade :: Add A Failover Cluster Node

Jan 3, 2010

I'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:

Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.

View 30 Replies View Related

SQL Install Into Cluster Fails

Apr 15, 2004

I'm trying to install SQL into a new cluster. The cluster service is up and running fine. I can even fail it from Node 1 to Node 2 with no problem.

However, when I try to install SQL, I get a screen that tells me that SQL is performing required operations on the cluster nodes...this may take a few minutes.

After hanging on that message for a looong time, SQL comes up with a generic message that the install failed and that SQL is cleaning up. Then, nothing. No error message, nothing that I can track down.

Some system information:
Node 1. Dell PE2650, 2x 2.8 GHz, 2 GB RAM
- Windows 2000 Advanced Server
- Dell Perc3/DC RAID/SCSI Controller
- Dell Perc3/DI Integrated RAID Controller

Node 2. Dell PE2650, 2x 2.8 GHz, 2 GB RAM
- Windows 2000 Advanced Server
- Dell Perc3/DC RAID/SCSI Controller
- Dell Perc3/DI Integrated RAID Controller

Shared Storage. Dell PV220
- Q: Quorum (1 GB)
- S: Data (136 GB)
- T: Logs (20 GB)

Additional Notes:
1. I am using a checklist from Dell and another from MS.
2. I have also downloaded and read the checklist from sql-server-performance.com.
3. I have ensured that the comclust.exe was run on both nodes prior to starting the SQL installation
4. I am using SQL Enterprise Edition. We used the same CD to install a cluster server two weeks ago.

Questions:
1. Where can I find an installation error log that might point more specifically to where the problem might be?
2. Any thoughts on what the problem might be?
3. Anyone ever experience something similar?

View 3 Replies View Related

SQL 2K5 Cluster Install Fails

Sep 28, 2007

Have SQL 2000 SP4 clustered instance running now. Attempted inplace upgrade to SQL 2K5 standard edition.
Boxes are Windows 32 bit Ent Edition, SP2. Install wizard installed pre-req's just fine, and I got past the "components to install" box of the install wizard. When I clicked next, the current 2000 instance (already installed component) was grayed out and I could not select it. Checking the messages in the install wizard, I saw that my "upgrade was blocked".
I cancelled out of the install wizard to verify all requirements.

Bounced both boxes, and now when I try to run the install wizard, it tried to install the required support files (ASP.net 2.0, SQL Native Client and what not) and then the install wizard hangs..... and never comes back. I have to kill it from taskmgr. Bounced the boxes and tried again, same thing. Install wizard hangs forever.

Yes, I am running from the active node holding the cluster resources. Yes, SQL 2000 instance is cold. Yes, I've checked add/remove programs and there is nothing to uninstall.
Checked event viewer and I see the following errors:

Hanging application setup.exe, version 2005.90.1399.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000.

Fault bucket 238575085.

I've reached out to our TAM, but any help would be appreciated. No matter how many times I try, the install wizard now chokes and never comes back.

View 8 Replies View Related

Cluster Install Fails

Jan 31, 2006

I'm running into issues installing SQL 2005 Enterprise on a Win2003 server. They seem to be related to missing rights. I've done a lot of research and have come up empty. Does anyone know why I'm getting these log entries? Thanks for any help.

Running: OpenPipeAction at: 2006/0/31 11:35:35
Complete: OpenPipeAction at: 2006/0/31 11:35:35, returned false
Error: Action "OpenPipeAction" failed during execution.

Error: 0x80070005 TaskScheduler::SetTargetComputer for \SERVER
Complete: RunRemoteSetupAction at: 2006/0/31 11:35:35, returned false
Error: Action "RunRemoteSetupAction" failed during execution. Error information reported during run:
Attempting to determine log files for remote install.
Connection to remote computer's scheduler service.
Error: 80070005 Access is denied.

Skipped: InstallASAction.11
Waiting for actions from remote setup(s)
Breaking wait state and aborting package due to cancel code received: 1602
Remote setup(s) are ready
Notify package action is determined: 1602
Error Code: 0x800700e9 (233)
Windows Error Text: No process is on the other end of the pipe.

Source File Name: remotemessageliboverlappedpipelistener.cpp
Compiler Timestamp: Fri Jul 29 01:13:51 2005
Function Name: sqls::OverlappedPipeListener::writePipe
Source Line Number: 294
Notification failed to send.

View 9 Replies View Related

SQL Cluster Fails Every 2nd Week

Dec 30, 2006

I have SQL Server 2000 SP4

Cluster Services running data on SAN

I have two groups SQL1 owner SQLCL1, SQL2 owner SQLCL2

Active resources

SQLCL1 owner SQLCL1 group SQL1

SQLCL2 ower SQLCL2 group SQL2

Every 2 weeks at 1:30 on a friday of all days The active resources for SQL1CL1 switch to SQLCL2 so under active resources i have all of SQL1 in there.

I then decided to flip flop everything SQL1 to SQLCL2

Then again 2 weeks later again SQL1 fails over .....

I cannot figure out why that every 2 weeks this is failing over to the other nodes.

Any advice is appreciated

View 2 Replies View Related

SQL Server Setup Fails

Dec 4, 2006

Dear,

When i installing SQL Server in my server then i recieve this massege can any one help me regarding :

TITLE: Microsoft SQL Server 2005 Setup
------------------------------

SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files".

For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29515&EvtType=lib%5codbc_connection.cpp%40Do_sqlScript%40OdbcConnection%3a%3aconnect%40connect%40xea75

------------------------------
BUTTONS:

&Retry
Cancel
------------------------------

View 4 Replies View Related

Access Denied To Cluster Storage When Restoring 2005 Full Text DB To 2014 Cluster

Jun 10, 2015

I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message

Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.

[code]....

I went as far as giving the folder full access to everyone temporarily and received the same error.

View 1 Replies View Related

Setup And Upgrade :: 1433 Not Listening On 2012 Cluster?

Jul 27, 2015

i setup a 2 node sql cluster but 1433 is not listening. I check sql configuration manager and entered 1433 for all ip addresses restarted services but still not 1433

View 14 Replies View Related