Sql 2005 Install Error. MODIFY FILE Failed. Specified Size Is Less Than Current Size.
Jun 15, 2006
I installed sql 2005 a while back. Then I recently found out my file system was fat32 (I don't understand why the hardware people did this...) and I had to convert to NTFS. Naturally the sql service no longer worked so I uninstalled inorder to reinstall now I can't reinstall it I keep getting this message
native_error=5039, msg=[Microsoft][SQL Native Client][SQL Server]MODIFY FILE failed. Specified size is less than current size.
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
We have an application with replicated environment setup on sql server 2012 . Users will have a replica on their machines and they will replicate to the master database. It has 3 subscriptions subscribed to the publications on the master db.
1) We set up a replica(which uses sql server 2012) on a machine with no sql server on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 33gigs and ldf has grown to 41 gigs. I went to sql server management studion . Right click and checked the properties of the local database. over all size is around 84 gb with little empty free space available.
2) We set up a replica(which uses sql server 2012) on a machine with sql server 2008 on it. After the initial synchronization(used replmerge tool) the mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
3) We set up a replica(which uses sql server 2012) on a machine with sql server 2012 on it. We have dropped the local database and recreated the local db and did the initial synchronization using replmerge tool. The mdf file has grown to 49 gigs and ldf has grown to 41 gigs. I went to sql server management studio , Right click and checked the properties of the local database. over all size is around 90 gb with 16 gb free space available.
Why it is allocating the space differently? This is effecting our initial replica set up times.
I want to store a Zip file as a BLOB, but I get an error: "File 'C:<path of mdf file> ' appears to have been truncated by the operating system. Expected size is 2560KB but actual size is 1536KB " whenever the BLOB exceeds 1MB.
Any suggestions? How can I store larger .ZIP files to the Database? I am using MS SQL 2005 Express and the data type that I gave for the column to store Blob is "varbinary(MAX)".
I am inserting byte array in to this field. It works fine for a zip file less than 1MB but as soon as the zipped file size increases beyond 1MB, lots of error pop-up and then the database is not readable. Its says that, the data in the data base may have been corrupted...
I have one db test with one .mdf and .ldf file...mdf file size is 100mb and for some reson i removed all the tablesfrom that .mdf file and transfer it into new secondary file so all thetables moved into secondary file now i want to reduce the first .mdffile from 100 mb to 50mb is that possible,it's showing 90mb is free.Please reply
Using C#, SQL Server 2005, ASP.NET 2, in a web app, I've tried removing the size from parameters of type NCHAR, NVARCHAR, and VARCHAR. I'd rather just send a string and let the size of the parameter in the SP truncate any extra chars if need be. I began getting the error below, and eventually realized it happened only with output parameters, as in the code snippet below.String[3]: the Size property has an invalid size of 0. par = new SqlParameter("@BusinessEntity", SqlDbType.NVarChar); par.Direction = ParameterDirection.Output; cmd.Parameters.Add(par); cmd.ExecuteNonQuery();What's the logic behind this? Is there any way around it other than either finding out what the size should be, or assigning a size larger than would ever be needed? ThanksMike Thomas
I have a log file that is approximately 50 GIG. I backed up just the log and the file size of the .bak is 192 GIG . Why is this? Shouldn't it be closer to the 50 GIG.
Normally I wouldn't let log grow this much. But we are in process of getting new server up and running and don't have backups going yet. They are working on getting that up and running this week.
So I did a log backup to give me back some log space for now but was concerned when I saw the size of the .bak file.
When I view media contents of the backup device it shows one tranaction log back up and size of 192 GIG.
What is up with this. I know in SQL 2000 the log backup files where never this big. they were about the size of the log itself.
From BOL, I see these remarks with respect to the MODIFY FILE subcommand (my underline added):
Initializing Files By default, data and log files are initialized by filling the files with zeros when you perform one of the following operations:
Create a database
Add files to an existing database
Increase the size of an existing file
Restore a database or filegroup
Which leads me to believe that expanding the size of a datafile will also wipe out (my definition of 'initialize') any existing data within that file.
I may be misunderstanding 'initialize', because when I tested it out, I found this wasn't the case - my table data written to the file was still there after a resize.
Need to clarify to what degree I'd be taking a risk by increasing the file size on a datafile which already has data in it.
hi all, I am using SQL server 2005.The Log file size increased to 40GB,so I detach the DB and delete the log & created new log file.Can I restrict the growth.I mean if the file size become 1000MB,I need to clear the log file.Previously it was Enabled the autogrowth 10% & unrestricted File size,Actually I modified to restricted file size 1000MB.is it work? can I know restricted file size 1000MB what will happen?I mean , is it clear the log after reaching 1000MB?please advice.
I have a database that is 1.7terabyte in size with 136gb free and throws a "transport level error" telling me to discard the results when I run dbccshrinkfile ('DBNAME', size). I have tried various increments of size, from truncateonly to 1MB below its current value, and nothing works. I have tried to detach and reattach the db, restart the service, restart the server, and none have provided a solution. Any ideas?
A simple alter statement to populate a column is giving the error below. UPDATE AM_PROFILE_4101_0 SET _92284 = CONVERT(varchar(1000),fv.varcharValue) FROM AM_PROFILE_4101_0 pt INNER JOIN cyfield_value fv ON fv.fieldID = 92284 AND pt.AM_PROFILE_ID = fv.AMid
Cannot create a row of size 8125 which is greater than the allowable maximum of 8060. The table as many varchar(max) columns such as _92284, and many are populated with around 1000 bytes of data. Everything I'm reading tells me SQL 2005 supports large row sizes. But why is this error still coming up.
Other usage info: These numbered columns (i.e. _92284) are dropped, added, and repopulated with data every night.
I am having an issue with SQL 2005 SSIS package...Win 2003 SP2...SQL 2005...
We receive files in the format of .TRK into an input directory...These files then are copied to a local directory on server and a .bat file loops through renaming each .TRK to MyFile.Txt...MyFile.Txt is then uploaded to a SQL table via DTS...Nothing complicated...The DTS runs fine when MyFile.Txt is placed there manually and executed...The rub is the call through batch file...
Error string: [Microsoft][ODBC SQL Server Driver]Packet size change not honored by server, server size used
Error source:
Help file:
Help context: 0
Here's my trouble shooting...Reinstall SP2 on Windows to get MDAC 2.8 version...MS KB article states that the ODBC registry key HKEY_LOCAL_MACHINESOFTWAREODBCINST.INISQLServerDriverODBCVer should be 3.7 or greater...It's 3.5 on this server...MDAC 2.8 (which is installed with Win2003 SP2) is supposed to take care of installing right driver...All registry keys point to the proper version of sqlsvr32.dll in .WindowsSystem32...
I'm at a loss...Currently we are looking at rewriting the bat file in C# or something similar...I would really like to get running as is...
Hi, I have a problem importing data from SQL Server 2000 'text' columns to SQL Server 2005 nvarchar(max) columns. I get the following error when encountering a transfer of any column that matches the above. The error is copied below,
Any help on this greatly appreciated...
ERROR : errorCode=-1071636471 description=An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unicode data is odd byte size for column 3. Should be even byte size.". helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC} (Microsoft.SqlServer.DtsTransferProvider)
Hi folks,Can anyone enlighten me here? I'm trying to use a SPROC which, when supplied with an int, looks up the table and returns certain columns from it. I'm using a SqlCommand, here's my codebehind: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ SqlCommand dataSource = new SqlCommand("retrieveData", new SqlConnection(dbConnString)); dataSource .CommandType = CommandType.StoredProcedure; dataSource .Parameters.AddWithValue("id", poid); dataSource .Parameters.AddWithValue("title", title).Direction = ParameterDirection.Output; dataSource .Parameters.AddWithValue("creator", creator).Direction = ParameterDirection.Output; dataSource .Parameters.AddWithValue("assignee", assignee).Direction = ParameterDirection.Output; etc, etc... And the SPROC:------------------------------------------------------------------------------------------------------------------set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[retrieveData] @id int, @title varchar(50) OUTPUT, @creator varchar(50) OUTPUT, @assignee varchar(50) OUTPUT, @contact varchar(50) OUTPUT, @deliveryCost numeric(18,2) OUTPUT, @totalCost numeric(18,2) OUTPUT, @status tinyint OUTPUT, @project smallint OUTPUT, @supplier smallint OUTPUT, @creationDateTime datetime OUTPUT, @amendedDateTime datetime OUTPUT, @locked bit OUTPUT AS /**SET NOCOUNT ON; **/ SELECT [title] AS [@title], [datetime] AS [@creationDateTime], [creator] AS [@creator], [assignee] as [@assignee], [supplier] as [@supplier], [contact] AS [@contact], [delivery_cost] AS [@deliveryCost], [total_cost] AS [@totalCost], [amended_timestamp] AS [@amendedDateTime], [locked] AS [@locked] FROM purchase_orders WHERE [id] = @id; ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ The id being passed in is definately not null, and is set to a value of an item I know exists. The resulting error is:
Exception Details: System.InvalidOperationException: String[1]: the Size property has an invalid size of 0.Line 63: retrievePODetails.Connection.Open();Line 64: retrievePODetails.ExecuteNonQuery();[InvalidOperationException: String[1]: the Size property has an invalid size of 0.] System.Data.SqlClient.SqlParameter.Validate(Int32 index) +717091... ... Can anyone see anything I'm missing? Thanks,Ally
I am getting error to run stored procedure using executenonquery method. The Stored Procedure is having OUTPUT parameter. ExecuteNonQuery statement is called using SqlHelper. Error : String[18]: the Size property has an invalid size of 0
Just wanted to know what is a general rule of thumb when determining log file space against a database's data file.We allow our data file for our database to grow 10%, unlimited. We do not allow our log file to autogrow due to a specific and poorly written process (which we are in a three month process of remove) that can balloon the log file size.Should it be 10% of the Data file, i.e. if the Date file size is 800MB the log file should be 8MB?I realize there are a myraid of factors that go against file size but a general starting point would be nice.ThanksJeff--Message posted via http://www.sqlmonster.com
When I tried to SQL Server 2005 (Standard) to two-node Windows 2003 servers, the Remote Setup task on the 2nd node hang. Here is the SQL Setup log. Please help figure out the cause of the problem. Thanks in advance.
Microsoft SQL Server 2005 Setup beginning at Tue Apr 24 16:17:14 2007 Process ID : 2864 \irv144C$SQL2005Std-x64disc1setup.exe Version: 2005.90.1399.0 Running: LoadResourcesAction at: 2007/3/24 16:17:14 Complete: LoadResourcesAction at: 2007/3/24 16:17:14, returned true Running: ParseBootstrapOptionsAction at: 2007/3/24 16:17:14 Loaded DLL:\irv144C$SQL2005Std-x64disc1xmlrw.dll Version:2.0.3604.0 Complete: ParseBootstrapOptionsAction at: 2007/3/24 16:17:14, returned false Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run: Could not parse command line due to datastore exception. Source File Name: utillibpersisthelpers.cpp Compiler Timestamp: Fri Jul 29 01:13:55 2005 Function Name: writeEncryptedString Source Line Number: 124 ---------------------------------------------------------- writeEncryptedString() failed Source File Name: utillibpersisthelpers.cpp Compiler Timestamp: Fri Jul 29 01:13:55 2005 Function Name: writeEncryptedString Source Line Number: 123 ---------------------------------------------------------- Error Code: 0x80070002 (2) Windows Error Text: The system cannot find the file specified.
Source File Name: cryptohelpercryptsameusersamemachine.cpp Compiler Timestamp: Mon Jun 13 14:30:00 2005 Function Name: sqls::CryptSameUserSameMachine:rotectData Source Line Number: 50
2 Could not skip Component update due to datastore exception. Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "InstallMediaPath" {"SetupBootstrapOptionsScope", "", "2864"} in cache Source File Name: datastorepropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SetupBootstrapOptionsScope.InstallMediaPath Source Line Number: 44 ---------------------------------------------------------- No collector registered for scope: "SetupBootstrapOptionsScope" Running: ValidateWinNTAction at: 2007/3/24 16:17:14 Complete: ValidateWinNTAction at: 2007/3/24 16:17:14, returned true Running: ValidateMinOSAction at: 2007/3/24 16:17:14 Complete: ValidateMinOSAction at: 2007/3/24 16:17:14, returned true Running: PerformSCCAction at: 2007/3/24 16:17:14 Complete: PerformSCCAction at: 2007/3/24 16:17:14, returned true Running: ActivateLoggingAction at: 2007/3/24 16:17:14 Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run: Datastore exception while trying to write logging properties. Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache Source File Name: datastorepropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SetupStateScope.primaryLogFiles Source Line Number: 44 ---------------------------------------------------------- No collector registered for scope: "SetupStateScope" 0000000000EDAF90Unable to proceed with setup, there was a command line parsing error. : 2 Error Code: 0x80070002 (2) Windows Error Text: The system cannot find the file specified.
Source File Name: datastorepropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SetupBootstrapOptionsScope.InstallMediaPath Source Line Number: 44
Hello, Anybody has came to solution across this error? We are getting this error repeatedly. I appreciate if anybody give suitable solution for this. Thanks, Ravi
Hi, i use this script that show me the size of each table and do the sum of all the table size.
SELECT X.[name], REPLACE(CONVERT(varchar, CONVERT(money, X.[rows]), 1), '.00', '') AS [rows], REPLACE(CONVERT(varchar, CONVERT(money, X.[reserved]), 1), '.00', '') AS [reserved], REPLACE(CONVERT(varchar, CONVERT(money, X.[data]), 1), '.00', '') AS [data], REPLACE(CONVERT(varchar, CONVERT(money, X.[index_size]), 1), '.00', '') AS [index_size], REPLACE(CONVERT(varchar, CONVERT(money, X.[unused]), 1), '.00', '') AS [unused] FROM (SELECT CAST(object_name(id) AS varchar(50)) AS [name], SUM(CASE WHEN indid < 2 THEN CONVERT(bigint, [rows]) END) AS [rows], SUM(CONVERT(bigint, reserved)) * 8 AS reserved, SUM(CONVERT(bigint, dpages)) * 8 AS data, SUM(CONVERT(bigint, used) - CONVERT(bigint, dpages)) * 8 AS index_size, SUM(CONVERT(bigint, reserved) - CONVERT(bigint, used)) * 8 AS unused FROM sysindexes WITH (NOLOCK) WHERE sysindexes.indid IN (0, 1, 255) AND sysindexes.id > 100 AND object_name(sysindexes.id) <> 'dtproperties' GROUP BY sysindexes.id WITH ROLLUP) AS X ORDER BY X.[name]
the problem is that the sum of all tables is not the same size when i make a full database backup. example of this is when i run this query against my database i see a sum of 111,899 KB that they are 111MB,but when i do full backup to that database the size of this full backup is 1.5GB,why is that and where this size come from?
I need to write a process to get file size in kb and record count in a file. I was planning on writing a c# console app that takes the file path and name as a param however should i use a CLR?
I cant put a script in the ssis when it's bringing the file down because it has been deemed that we only use ssis for file consumption.
What is the recommended size and file growth for a database and log file? We will be storing approx 10000 records a day.Currently we have the following:
CREATE DATABASE Dummy ONÂ PRIMARY ( NAME = Dummy_data, Â Â FILENAME = 'D:....DATADummy.mdf', Â Â SIZE = 250MB, Â Â FILEGROWTH = 25MB ) LOG ON ( NAME = Dummy_log, Â Â FILENAME = 'D:....DATADummy_log.ldf', Â Â SIZE = 50MB, Â Â FILEGROWTH = 5MB ) ; GO
First of all i would like to thank everyone for there time and efforts in this web page I am new to the feild of DBA and i have some uncleared points that i would like any one to make them clear for me Why the transactions log file size is not decreasing after the truncation of log? is there any thing i have to do or is it normal way?
