Sql Ce 3.5 Installing Properly In Win Ce 6.0, But Sdf File Is Not Creating................?????????????????????
Oct 9, 2007
Hello all:
I have followed the M/S instructions for installing SQL compact edition and
the query analyzer on a device
I have copied to the device the following cab files
to install SQL Compact Edition:
==> I installed Sqlce.wce5.x86.cab
==> Sqlce.dev.ENU.wce5..cab
==> Sqlce.wce.repl.wce5.x86.cab
all files install with no errors.
I open the query analyzer and tried to create new sdf file, it's not creating and shows the following error
ISQLW Error
Failed to initialize the provider. Please make sure that sql server compact
edition is properly instlled.
What should i do to overcome with this problem?
Please help me out guys.
Regs
Raja
View 1 Replies
ADVERTISEMENT
May 22, 2002
I installed MDAC 2.6 SP1 on my 2000 machine in order to get SQL server 7.0 to work properly on my machine. I'm trying to get installed on server which is on NT 4.0 SP6 so that when I save a DTS package on my 2000 machine and run it on the server it doesn't get the error client access ODBC driver not capable. I intalled MDAC 2.6 SP1 on the server but it doesn't look like its updating it. The install goes fine. I reboot but when I go into the ODBC connections and look at the driver for the client acceess it still has version 6.00.00.05 while my 2000 machine says 6.00.07.00
Any ideas on why its not updating. Can I just take the DWBODBC.DLL from my machine and copy it to the server?
View 1 Replies
View Related
Jun 29, 2007
Hi there,
I have a flat file source in my data flow that is suppose to feed through a couple of columns to a script component. All of the columns have data but when I debug in my script component (with the aid of messageboxes) I can see that one of then is empty.
This is wrong because when I preview that data in the flat file source, I can see that the columns are all populated.
Has anyone ever encountered that a flat file source doesn't communicate with a script component properly? I mean it does pass through the data of all other columns except for one.
I have replaced the components in case it had become corrupt and I even rebuild the package but the problem still persists.
Any advice would be welcome
Regards
Mike
View 11 Replies
View Related
Jul 20, 2005
Hi there,I have a database on my test machine that will need to be installed on usersmachines. I would like to create the database with the given schema on theusers machine and also with some suitable default values in the tables. Inote that although I can script the schema so that re-creating the structureof the database is simple on the users machine, I cannot script the contentsof the tables also (automatically). What I would like to do is take somekind of "snapshot", save it as a script and then run this script in myinstaller. Are there any tools available to do this?Secondly and related to the above: if I subsequently make changes to thedatabase schema (adding or removing columns, altering, adding or removingstored procedures etc.), how do I roll out those changes to a customer? DoI need to hand code an "upgrade" script, or is there a tool that willproduce a "difference between" script I can run on the customers machine?Thanks for any tips you can give me about this.Robin
View 3 Replies
View Related
Jul 6, 2015
For a database, we have 4 data files in a particular file group and the file sizes are almost 70 GB each.
Do I come across any performance issues if I create/pre-allocate an additional data file in the same file group so that the existing files don't grow too much?
View 5 Replies
View Related
Oct 20, 2006
Hello,
On my computer, XP SP2, VB 2005 Express and VisualWeb 2005 Express are installed.
SQL 2005 Server express was also automatically installed in the same time.
I want to complete this SQL SERVER EXPRESS Installation, by downloading complements;
No problem to install SQL Server Management Studio
but problem occurs :
I downloaded SQLEXPR_ADV_FRN.EXE (Version : 0.0.0.0)
When I want to install it, I have a first box Extracting Files with :
Extracting Files : setupsqlrun_rs.msi
To Directory ; i:8eefbf891116a71dbc7190cceb05b9
(I don€™t know why it wants to install in this partition !!!!)
Then an error box :
Extraction Failed
File is corrupt
I had same issue when I tried to install SQLEXPR_TOOLKIT_FRN.EXE
Can anyone explain me how to resolve these issues ?
Regards
Mouspi
View 4 Replies
View Related
Mar 2, 2014
I am trying to create an ssis package with dynamic csv file as output. and out format contains query output.
sample file name:
Unique identifier + query output + systemdate();
The expression is looking like this.
@[User::FilePath] + @[User::FileName] + ".CSV"
-- user filepath is a variable from ssis package. File name is the output from SQL query. using script task i have assigned the values to @[User::FileName] .
When I debugged the script task the value getting properly but same variable am using for Flafile destination. but its not working.
View 3 Replies
View Related
Mar 8, 2007
Hi there,
after we've upgraded to SP2 my flat-file-source component hangs in the validation phase.
normally at 50% or 66%.
i see no activity what-so-ever cpu-wise/memory-wise.
have no idea how to fix it.
(sorry if i am posting this twice, couldn't see my previous post)
View 1 Replies
View Related
Jul 14, 2007
Can anybody run me through the process to create a CSV file from an SQLexpress database using BCP.exe ?
Or is there a simpler way to create a CSV for that matter?
Really important and would be much appreciated.
View 1 Replies
View Related
Oct 26, 1998
Hi,
If anyone knows ,please tell how to store all fields with comma seperation by select statement into a text file, without using Extended Stored Procedure.
Thanks in advance.
View 4 Replies
View Related
May 22, 2007
I have a system which has several different dbases involved, and have created an update procedure within it all. It all works fine, but as a refrenence point I want to create a log file,each time the procedure is run.
This file will have useful info such as no of transactions added, no of product row n customer rows, any unmatching entries and any exception records. What I dont know is how do I create such a file?
I was thinking maybe I could save the info into a table, and then somehow transfer this into a txt file? The txt file will be replaced each time the stored procedure is run.... Does any1 know any links or ideas that might help me?...I never does anything lik this b4 but I have seen it done.....
Thanks in advance!
View 11 Replies
View Related
Jun 28, 2006
Hi All!
I am still trying to understand all the differences between SQL 2000 and 2005. This question probably has a really easy answer, but I just don't know it. I need to create a DTS routine that creates a file from a table. The catch is, it needs to have a header segment, data segment, and footer segment. In SQL 2000, I would have created activex script to create this file. Since SQL 2005 is going away from activex script I am at a loss.
The file will be in this format.
Header
Data
Data
Data
Data
Data
Data
Footer
Basically output header from table... loop through table for data... and output footer from table.
If anyone knows how to do this, I would appreciate the help.
Thanks.
Danielle
View 5 Replies
View Related
Sep 8, 2007
Hi,
We are using VS 2005 with SQL Server Mobile Edition. We created the .sdf file on the desktop and added this file to our VS project and set the Build Action to content. Next we deployed our app on Symbol PDA which has Windows CE 5.0 as the OS. We followed the following steps:
1. Deploy the app.
2. Install .NET CF 2.0
3. System_SR_ENU.CAB
4. sqlce30.wce5.armv4i.CAB
5. sqlce30.dev.ENU.wce5.armv4i.CAB
6. sqlce30.repl.wce5.armv4i.CAB
Now I want to create a new .sdf file in PDA. So I open QA3.0 and type the create database command. But I get error:
You need to have a database connection opened in order to run this operation.
What could be the issue?
Regards,
Vilas
View 1 Replies
View Related
Apr 9, 2007
I was successfully able to installing sql server 2005 developer edition all peices except the "Workstation Component, Book Online, Development Tool", the last item in the installation list. It gave errror for bad sql.cab file. Although this developer edition came directly of the box this error came up in many attempts. Upon "Ignore" it gives error 2350.
I am able to run sql server's all the services and able to access it via VS.Net server browser. I can create and change tables etc. but there is no "Management Studio" installed. There is no icon for it either on the desktop or in the Start->SQL Server 2005 menu.
Is it possible to get and copy sql.cab file or entire client component from somewhere else? --Freed download or something? I searched for sql.cab file but it was not in the CD. It could be inside some other file or cmpressed.
Any suggestion.
View 2 Replies
View Related
Jun 11, 2008
Hi can I know how to create a dbml file for northwind database. Please note I am using sqlserver 2008
View 4 Replies
View Related
Nov 4, 2003
Hi, I wrote a report builder that creates a CSV file but I can't redirect to the file to view it. ERROR Cannot find the Server!. This works fine on the dev machine but deploy it and it does not.
Dim Conn As New SqlConnection(ConfigurationSettings.AppSettings("ConStr"))
Dim Cm As SqlCommand
Dim dr As SqlDataReader
Dim FileName As String = Guid.NewGuid.ToString & ".csv"
Dim FilePath As String = Server.MapPath("") & "CSVFiles" & FileName
Dim fs As FileStream = New FileStream(FilePath, FileMode.Create, FileAccess.Write)
Dim sw As StreamWriter = New StreamWriter(fs)
Dim Line As String
Dim lItem As System.Xml.XmlElement
Dim i As Int16
If ValidatePage() Then
Cm = New SqlCommand(BuildQuery, Conn)
Conn.Open()
dr = Cm.ExecuteReader()
Dim lXmlDoc As New System.Xml.XmlDocument()
lXmlDoc.LoadXml(txtHXml.InnerText)
For Each lItem In lXmlDoc.DocumentElement.SelectSingleNode("SELECT").ChildNodes
Select Case lItem.InnerText
Case "chkPRId"
Line &= "PR Id,"
Case "chkDateIssued"
Line &= "Date Issued,"
Case "chkOriginator"
Line &= "Originator,"
Case "chkBuyer"
Line &= "Buyer,"
Case "chkVendor"
Line &= "Vendor,"
Case "chkCostCode"
Line &= "Cost Code,"
Case "chkOracleRef"
Line &= "Oracle Reference,"
Case "chkTotal"
Line &= "Total,"
End Select
Next
Line = Line.Substring(0, Line.Length - 1)
sw.WriteLine(Line)
Line = ""
While dr.Read
For i = 0 To dr.FieldCount - 1
Line = Line & dr(i) & ","
Next
sw.WriteLine(Line)
Line = ""
End While
dr.Close()
Conn.Close()
sw.Close()
fs.Close()
Response.Redirect(FilePath)
End If
ResetPage()
PopulateListBoxFromXML()
View 1 Replies
View Related
Apr 23, 2001
how do you create a database from an .mdf file?
View 2 Replies
View Related
Dec 19, 2000
Hi,
How can we create a new D/B from a D/B Backup file (DataBase.Bak).
Thanks,
Princy
View 3 Replies
View Related
Oct 16, 2000
Hi,
I am new to SqlServer (I am using 7.0) and I have just recieved a database.bak file from one of our clients and I want to create a new D/B from this back up file ,I have already installed the MS SqlServer. Can you tell me how to do this.
Thanks,
Princy
View 1 Replies
View Related
May 17, 2003
I am using this bcp out construct and it works fine except that if the query does not return values it bcp's out a file anyhow. This is not wanted and I am looking for a work around.
SELECT @Year = CONVERT(varchar(4), @trxYearMonthStart, 120)
SELECT @Month = RIGHT(CONVERT(varchar(7), @trxYearMonthStart, 120),2)
SELECT @cmd = 'BCP "SELECT * FROM ' + @TableToBeCleaned + ''
SELECT @cmd = @cmd + ' WHERE '+ @SelectedColumn + ' BETWEEN '
print @cmd
SELECT @cmd = @cmd + '''' + CONVERT(varchar(10),@trxYearMonthStart,120) + ''' and ''' + CONVERT(varchar(10),@trxYearMonthEnd,120) + ''''
print @cmd
SELECT @cmd = @cmd + 'AND NOT EXISTS (Select * from DBCleanerHist Where TableName = ''' + @TableToBeCleaned + ''' and sYear = '+ @Year + ' and sMonth = ' + @Month + ')'
print @cmd
SELECT @cmd = @cmd + ' " QUERYOUT ' + @DBCleanerBackUpPath+'' +@TableToBeCleaned +'_'+ @Year + '_' + @Month + '.txt '
SELECT @cmd = @cmd + ' -c -C1250 -S -Uopms -Psmpo'
EXEC master.dbo.xp_cmdshell @cmd
The subquery checks first in DBCleanerHist if a file already has been extracted onto hd and if so do not create an empty file and overwrite an existing file.
thanks
mipo
View 1 Replies
View Related
Jul 7, 2004
Bit of a SQL newbie, having taken over a support role for a piece of software that my firm sells. It is basically a DB that runs on MSDE or SQL Server in either desktop or enterprise scenarios.
We do sell our software to clients who may or may not already have SQL on their machines. During installation, it searches for sqlservr.exe for existing SQL installations and if it finds nothing, will then install MSDE 1.0 to house the db files.
My question is this -
I can manually create a db or manually attach an existing db through sql query analyser where there is a full-blown SQL installation. Is there any way I can do the same where there is only MSDE installed? The simple solution, I guess, would be to download one of the freeware or shareware MSDE "Enterprise Managers", but this won't always be suitable for a client installation.
Many thanks for your assistance all.
:cool:
View 3 Replies
View Related
Oct 12, 2005
how can i create a new database with a .mdf file ? in mS SQL 2000
thank you
View 1 Replies
View Related
Sep 26, 2006
I am trying to read a SP.sql file where i want to write all the procedures to create them in the database
CREATE PROCEDURE SP_1
AS
BEGIN
DELETE FROM tb1
END
CREATE PROCEDURE SP_2
AS
BEGIN
DELETE FROM tb2
END
if there is only one procedure in the file it works, with > 1 procedure it fails
inserting GO between doesnt work
how is it possible to run a sql file with many stored procedures in it from a server langages ?
thank you
View 8 Replies
View Related
Mar 30, 2004
hi,
I am trying to create a file using a query in SQL...
kindly help.
Thankyou. --- Vijay
View 8 Replies
View Related
Jun 13, 2008
Hi All, I need to create a batch file to execute some 5-6 sql scripts. I have sql scripts for creating a table and related storedprocs and I need to generate a batch file to run all this scripts.
View 3 Replies
View Related
Oct 3, 2007
I have AdventureWorks installed. I am using SQL Server 2005.
I need to import some large tab delimited text files into SQL. From the research i did I thought that using BCO would be the best solution becausr I will have to import these files and export in the same format.
I am attempting to follow the example at:
Creating a Format File
http://msdn2.microsoft.com/en-us/library/ms191516.aspx
B. Creating a non-XML format file for character data
In my command window at C: I enter:
bcp AdventureWorks.HumanResources.Department format nul -c -f Department-c.fmt -T
I was expecting to be prompted with questions about the source file and have a format file created. When i press enter nothing hallende. No errors. Nothing.
Can come one give a beginner the step by step on how to creat the format file and use it to import (and export would be nice too).
View 2 Replies
View Related
Jan 13, 2006
Hi there,
I got a user who is requesting a weekly report to be exported in csv (comma delimited) format. But this process will run weekly using schedule job and he wants the file to save to a certain directory on the network. Two part questions...
1. Is there a way to create a .csv file programmatically after runing the query?
2. How would I save the .csv file to a specified directory on the network?
TIA
View 3 Replies
View Related
Apr 29, 2008
I want to create a file at Runtime.
File Name : \directorydirectorydirectoryabc.extension (The file has to be created in a specific path only.)
The following would be the contents.
Open 123.123.123.12
cd 'directoryname'
lcd \directorydirectorydirectorydirectory
mget *.extension
bye
The file has to be created only at runtime. How can I do this.
Thanks in advance for the help.
View 3 Replies
View Related
Feb 29, 2008
Hi All,
We have a fairly standard process whereby we get a trigger file from a client FTP site, and check whether it's blank (zero length) or not. if it's not zero length, then we attempt to download the actual data file. if that's successfull, we overwrite the trigger file with a blank file.
now this is all very easy in a batch script or unix shell script, but there appears to be no "create file" option in the file system task. I've also tried having a flat file destination in a data flow task but it insists that it wants columns to be fed to it.
how can I create a blank file?!?!?
Andrew.
View 1 Replies
View Related
Mar 23, 2008
Is there a way I can use one SQL server 2005 (full edition not express) Stored procedure that can execute a .SQL file as if it were in the SQL management studio Query window?
I have the situation where I have some .SQL file which were created with the 'Create to File' option in SQL Management studio. I then want to send them to a user who can execute them to create a SP on his SQL server without having to run the SQL management tools.
Regards
Clive
View 8 Replies
View Related
Aug 24, 2001
i got a mdf file from one sql server and am trying to create an identical database with this file. i've done it many times before, but for some reason it isnt working. here's the problem:
Server: Msg 945, Level 14, State 2, Line 1
Database 'isp' cannot be opened because some of the files could not be activated.
Server: Msg 1813, Level 16, State 2, Line 1
Could not open new database 'isp'. CREATE DATABASE is aborted.
View 1 Replies
View Related
Feb 13, 2006
Hi
Some one Please guide me... How to create a Excel File Dynamically in DTS.
Once i run my DTS Package the result should be moved to a new Excel sheet( This should be created dynamically).
I tries in this way but it says....Syntax error at the DTS GlobalVariables.....
Function Main()
Dim appExcel
Dim newBook
Dim oSheet
dim oPackage
dim oConn
Set appExcel = CreateObject("Excel.Application")
Set newBook = appExcel.Workbooks.Add
Set oSheet = newBook.Worksheets(1)
oSheet.Range("A1").Value = "au_lname"
oSheet.Range("B1").Value = "au_fname"
oSheet.Range("C1").Value = "phone"
oSheet.Range("D1").Value = "address"
oSheet.Range("E1").Value = "city"
DTSGlobalVariables("fileName").Value = "C:\" & Month(Now) & "-" &
Day(Now) & "-" & Year(Now) & "-" & Hour(Time) & "-" &Minute(Time) & "-" &
Second(Time) & ".xls"
With newBook
.SaveAs DTSGlobalVariables("fileName").Value
.save
End With
appExcel.quit
set oPackage = DTSGlobalVariables.parent
set oConn = oPackage.connections(2)
oConn.datasource = DTSGlobalVariables("fileName").Value
set oPackage = nothing
set oConn = nothing
Main = DTSTaskExecResult_Success
End Function
View 2 Replies
View Related
