We have a sql server 2000 active/passive cluster running on Windows Server 2003 and within the last 6 months have started getting the following errors which eventually cause the SQL Resource Group to failover.
An error occurred in the configuration monitor for instance <SQL Server Fulltext>: 80070005 - Access is denied.
SQL is at the latest service pack/hotfixes. (8.00.2187)
This cluster has been running fine for the past 3 years with no problems. Nothing has changed on the servers.
We've had Symantic Antivirus running on the servers for a long time but the FTDATA folder and the sql data and transaction logs are excluded and nothing has changed on the configuration.
We also run Diskeeper 2007 server on these servers but I can't see any problems with this.
Once it fails over it will run fine for several days and then the same errors will occur and it fails over again.
Any ideas on what might be causing this? I can't really find anything on the Microsoft site that matches this error.
Note: This has also just started happening on our test cluster which is an identical configuration.
For demonstration I created a fulltext index on table employee in Northwind database.
The following query gives an error:
SELECT * FROM employees WHERE CONTAINS (FirstName, 'Barbe')
Replacing 'Barbe' by 'Barb' or other words it works fine.
The error message is (I have a french version of SQL installed, here the translation: "A clause in the query contains only ignored words" Une clause de la requête ne contient que des mots ignorés)
Language for wordbreak in fulltext index is French and the error happens only with French, with English it works.
Hello.. When I used Microsoft SQL Server 2005 Management Studio Express to Create FULL TEXT INDEX by this code:
CREATE FULLTEXT INDEX ON txtfilestbl(txtfile) KEY INDEX PK_txtfilestbl ON ForumsArchiveLibCtlg WITH CHANGE_TRACKING AUTO
It returns this ERR MSG:
Informational: No full-text supported languages found. Informational: No full-text supported languages found. Msg 7680, Level 16, State 1, Line 1 Default full-text index language is not a language supported by full-text search.
I Use same this code to create FULL TEXT INDEX by using Microsoft SQL Server 2005 Management Studio, and it was working properly. What I have to do?
I keep getting a cluster error I have no clue why it is happing. The error is "No Checkpoint record was found in log file Z:logschk1431.tmp the checkpoint file is invalid or was deleted." any help will be welcome.
We have a one node cluster that is receiving the below error messages in the cluster.log and the Event Viewer. In the SQL Server 2005 SP2 job that fails we receive a slighlty different message. The OS is Windows 2003 SP1. This is not a 64-bit box. We have checked the permissions of the cluster service account in SQL Server to be sure they are correct. Can anyone please help with this issue.
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed 00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = 08S01; native error = 2746; message = [Microsoft][SQL Native Client]TCP Provider: An existing connection was forcibly closed by the remote host.
00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = 08S01; native error = 2746; message = [Microsoft][SQL Native Client]Communication link failure 00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] OnlineThread: QP is not online. 00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed 00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure 00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed 00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure 00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed 00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure 00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed 00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure 00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed 00000a0c.0000089c::2007/06/12-12:51:27.459 ERR SQL Server <SQL Server>: [sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure
I have windows server 2003 service pack 1 and sql server 2005 service pack 1 - 64 bit. Sometimes it happens in the middle of the night. Sometimes it's in the middle of the day and sometimes it's multiple times in the same day. Sometimes the server reboots, but does not failover.
I am trying to install SQL 2005 in a 2-node Windows 2003 cluster. I set the cluster up through Virtual Server 2005 with 2 virtual nodes and one virtual domain. The nodes can connect to each other as well as the physical machine. When I try to install a fresh copy of SQL 2005 on my cluster, I get an error every time. The error stops the installation while checking system configuration after installing prerequisites. The log file entry is as follows:
******************************************* Setup Consistency Check Report for Machine: --SERVERNAME-- ******************************************* Article: WMI Service Requirement, Result: CheckPassed Article: MSXML Requirement, Result: CheckPassed Article: Operating System Minimum Level Requirement, Result: CheckPassed Article: Operating System Service Pack Level Requirement, Result: CheckPassed Article: SQL Compatibility With Operating System, Result: CheckPassed Article: Minimum Hardware Requirement, Result: CheckPassed Article: IIS Feature Requirement, Result: Warning Description: IIS is not installed, therefore Report Server feature will be disabled Action: Install IIS in order for Report Server feature to be enabled Article: Pending Reboot Requirement, Result: CheckPassed Article: Performance Monitor Counter Requirement, Result: CheckPassed Article: Default Installation Path Permission Requirement, Result: CheckPassed Article: Internet Explorer Requirement, Result: CheckPassed Article: Check COM+ Catalogue, Result: CheckPassed Article: ASP.Net Registration Requirement, Result: CheckPassed Article: Minimum MDAC Version Requirement, Result: CheckPassed <Func Name='PerformDetections'> 1 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0 Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run: Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "ComputerList" {"SqlComputers", "", ""} in cache Source File Name: datastoreclusterinfocollector.cpp Compiler Timestamp: Fri Sep 16 13:20:12 2005 Function Name: ClusterInfoCollector::collectClusterVSInfo Source Line Number: 883 ---------------------------------------------------------- Failed to detect VS info due to datastore exception. Source File Name: datastoreclustergroupsproperties.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: ClusterGroupScope.SharedDisks Source Line Number: 56 ---------------------------------------------------------- Failed to find a cluster group that owned shared disk: J: WinException : 2 Error Code: 0x80070002 (2) Windows Error Text: The system cannot find the file specified. Source File Name: datastoreclustergroupsproperties.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: ClusterGroupScope.SharedDisks Source Line Number: 56
I am following the 2005 BOL article "How to: Remove a SQL Server 2005 Failover Clustered Instance (Setup)". The process is very simple, but perhaps the documentation is missing some steps. I am receiving the following errors during the uninstall.
The setup has encountered an unexpected error while Completing Commit. The error is: The cluster resource cannot be moved to another group because other resources are dependent on it.
If I click OK I receive the error below.
Failed to set registry settings for server network libraries. The action is SetShilohRoot. The error is 2 (The system cannot find the file specified.)
Am I supposed to do something to the cluster prior to performing the uninstall?
We are currently having the following problem. When trying to connect using "Be made using the login's current security context" I am getting the following error message "Login Failed for NTAuthorityAnonLogin". Yesterday this worked. The setup is as follows
SQL2008R2, nine instances on a cluster. The instance can use "current security context" when both instances are on the same node ie instance 1 node a to instance 2 node a , but when one is on node a and the other is on node b, i.e., instance 1 node 1 to instance 2 node b, we get the error above.
I am following the 2005 BOL article "How to: Remove a SQL Server 2005 Failover Clustered Instance (Setup)". The process is very simple, but perhaps the documentation is missing some steps. I am receiving the following errors during the uninstall.
The setup has encountered an unexpected error while Completing Commit. The error is: The cluster resource cannot be moved to another group because other resources are dependent on it.
If I click OK I receive the error below.
Failed to set registry settings for server network libraries. The action is SetShilohRoot. The error is 2 (The system cannot find the file specified.)
Am I supposed to do something to the cluster prior to performing the uninstall?
I am installing SQL 2005 on a 2-node cluster running on Windows 2003 R2. When I try to install SQL 2005 on my cluster, I get an installation error. The error stops the installation while checking system configuration after installing prerequisites. The log file entry is as follows:
C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0 Running: LoadResourcesAction at: 2007/9/12 16:6:42 Complete: LoadResourcesAction at: 2007/9/12 16:6:42, returned true Running: ParseBootstrapOptionsAction at: 2007/9/12 16:6:42 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0 Complete: ParseBootstrapOptionsAction at: 2007/9/12 16:6:42, returned true Running: ValidateWinNTAction at: 2007/9/12 16:6:42 Complete: ValidateWinNTAction at: 2007/9/12 16:6:42, returned true Running: ValidateMinOSAction at: 2007/9/12 16:6:42 Complete: ValidateMinOSAction at: 2007/9/12 16:6:42, returned true Running: PerformSCCAction at: 2007/9/12 16:6:42 Complete: PerformSCCAction at: 2007/9/12 16:6:42, returned true Running: ActivateLoggingAction at: 2007/9/12 16:6:42 Complete: ActivateLoggingAction at: 2007/9/12 16:6:42, returned true Running: DetectPatchedBootstrapAction at: 2007/9/12 16:6:42 Complete: DetectPatchedBootstrapAction at: 2007/9/12 16:6:42, returned true Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions: Condition "EventCondition: __STP_LaunchPatchedBootstrap__3608" returned false. Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions: Condition "Setup is running locally." returned true. Running: PerformDotNetCheck2 at: 2007/9/12 16:6:42 Complete: PerformDotNetCheck2 at: 2007/9/12 16:6:42, returned true Running: InvokeSqlSetupDllAction at: 2007/9/12 16:6:42 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0 <Func Name='DwLaunchMsiExec'> Examining 'sqlspars' globals to initialize 'SetupStateScope' Opening 'MachineConfigScope' for [OAKLRRDSDBA] Trying to find Product Code from command line or passed transform If possible, determine install id and type Trying to find Instance Name from command line. No Instance Name provided on the command line If possible, determine action Machine = OAKLRRDSDBA, Article = WMIServiceWin32OSWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = WMIServiceReadRegWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = WMIServiceCIMDataWorking, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = XMLDomDocument, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = Processor, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = PhysicalMemory, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = DiskFreeSpace, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = OSVersion, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = OSServicePack, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = OSType, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = iisDep, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = AdminShare, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = PendingReboot, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = PerfMon, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = IEVersion, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = DriveWriteAccess, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = COMPlus, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = ASPNETVersionRegistration, Result = 0 (0x0) Machine = OAKLRRDSDBA, Article = MDAC25Version, Result = 0 (0x0) ******************************************* Setup Consistency Check Report for Machine: OAKLRRDSDBA ******************************************* Article: WMI Service Requirement, Result: CheckPassed Article: MSXML Requirement, Result: CheckPassed Article: Operating System Minimum Level Requirement, Result: CheckPassed Article: Operating System Service Pack Level Requirement, Result: CheckPassed Article: SQL Compatibility With Operating System, Result: CheckPassed Article: Minimum Hardware Requirement, Result: CheckPassed Article: IIS Feature Requirement, Result: CheckPassed Article: Pending Reboot Requirement, Result: CheckPassed Article: Performance Monitor Counter Requirement, Result: CheckPassed Article: Default Installation Path Permission Requirement, Result: CheckPassed Article: Internet Explorer Requirement, Result: CheckPassed Article: Check COM+ Catalogue, Result: CheckPassed Article: ASP.Net Registration Requirement, Result: CheckPassed Article: Minimum MDAC Version Requirement, Result: CheckPassed <Func Name='PerformDetections'> 1 Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0 Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run: Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "ComputerList" {"SqlComputers", "", ""} in cache Source File Name: datastoreclusterinfocollector.cpp Compiler Timestamp: Fri Sep 16 13:20:12 2005 Function Name: ClusterInfoCollector::collectClusterVSInfo Source Line Number: 883 ---------------------------------------------------------- Failed to detect VS info due to datastore exception. Source File Name: datastorecachedpropertycollection.cpp Compiler Timestamp: Fri Jul 29 01:13:49 2005 Function Name: CachedPropertyCollection::findProperty Source Line Number: 130 ---------------------------------------------------------- Failed to find property "InstallIds" {"MachineConfiguration", "", "OAKLRRDSDBB"} in cache Source File Name: datastoresqldiscoverycollector.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SqlDiscoveryCollector::collectProperty Source Line Number: 132 ---------------------------------------------------------- Failed to open discovery on machine: OAKLRRDSDBB WinException : 2 Error Code: 0x80070002 (2) Windows Error Text: The system cannot find the file specified. Source File Name: datastoresqldiscoverycollector.cpp Compiler Timestamp: Fri Jul 29 01:13:50 2005 Function Name: SqlDiscoveryCollector::collectProperty Source Line Number: 132
I receive the below mentioned error message each time I try to install SP2 on SQL 2005 64 Bit Cluster: Using PrevRegRootPath: SoftwareMicrosoftMicrosoft SQL ServerMSSQL.2 GetServiceUserGroup failed for PLMCWSM01, 5 Error Code: 0x800706fd (1789) Windows Error Text: The trust relationship between this workstation and the primary domain failed. Source File Name: sqlcasqlcax.cpp Compiler Timestamp: Fri Feb 9 22:35:02 2007 Function Name: SetInstanceProperty Source Line Number: 1223
MSI (s) (78!08) [01:05:21:864]: Transforming table Error. MSI (s) (78!08) [01:05:21:989]: Transforming table Error.
MSI (s) (78!08) [01:05:21:989]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (78!08) [01:05:21:989]: Product: Microsoft SQL Server 2005 (64-bit) -- Error 29528. The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation. Error 29528. The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
I am trying to install SQL 2005 in a 2-node Windows 2003 cluster. I have tried both upgrade and fresh installation, but got same error. The error stops the installation while checking system configuration after installing prerequisites. The log file entry is as follows:
I am installing SQL 2005 on a 2-node cluster running on Windows 2003 R1. When I try to install SQL 2005 on my cluster, I get an installation error. The error stops the installation while checking system configuration after installing prerequisites. The log file includes the following message
could not find file datastoresqldiscoverycollector.cppp Failed to start discovery on machince :Node2
This happens when I run the steup from Node1 .When I run the installation on Node I get the same error with the machine name as Node1 .
I tried Enabling Netbios over TCPIP for the heartbeat network however with no results
Can somebody please provide the next steps .A step by step approach will be greatly appreciated .
I have the following setup: 1. Clustered Microsoft SQL Server 2005 (Build 3790: Service Pack 2) with .net 2.0 - Server A 2. Separate server containing the SSIS services (Per Microsoft - SSIS isn't cluster aware). - Server B
I am getting the following error when I run a SSIS package through a scheduled job on the Server A:
Description: The task "Set dynamic file name variable" cannot run on this edition of Integration Services. It requires a higher level edition.
I found the following post that fixes the issue, but I don't want to install SSIS on the SQL Cluster (Server A) because it isn't cluster aware.
This package runs fine locally from Visual Studio or from Server B. All of my other SSIS packages run fine on the Server A through the SQL Agent. This package fails on a script task that is setting some dynamic variables. Do I need to install some additional components or service packs to SQL Server on Server A?
I don't want to install SQL Server on the Server B and run the jobs through that agent because we don't have the money for a separate license.
Hello,I am using SQL 2005 and SQL Server Management Studio.How can I activate FullText in my database?Or should I do this only for the tables where I need it?How can I do this?Thank You,Miguel
I'm getting the following error when I go to create a cluster in the Failover Cluster Manager in Windows Server 2008.
"The address 10.10.10.111 is not valid for its associated network"
I'm following the instruction in the book for the 70-462 exam. There was a step that had me create a DNS A record for the address sql-cluster.contoso.com. The IP address was mapped to 10.10.10.111. I'm not sure if this is the culprit but its the only time I used that IP address in the setup.
Below are 2 screenshots. The first screenshot is the error. The second screenshot is my DNS console.
I have problem when I create the clusters I created domain account and give him permission create computer objects and real all properties but there are problem when clean up the cluster always pop up and error but latter I tried using my domain admin and worked perfectly is there any permission is missing for cluster ? or all I need is Create Computer Object and Read Permission?
We recently migrated our production environment from a win2k3/SQL 2000 EE cluster to a new 64 bit win2k3/ SQL 2005 SP1 Cluster.
Cluster works fine for a while (3-6 hours), then our logins start failing. We recieve the following error in the event log:
"The server was unable to load the SSL provider library needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books Online for information on this error message"
The only way to resume connectivity is to offline and online the sql service in the cluster.
The only reference to this error that I can find has something to do with a hotfix that might be available?
I have create a table called tblcatalog with colums id(identity,primary key) and contents(varchar(100))
I have then created a full text catalog on that table and populated it.
Then i wrote the following query "select contents from tblcatalog where contains(contents,'sample data')" It is fetching 0 records even though u have 5 records with entries "sample data"
Apologies if this is not the correct place to put this.I wrote this query to perform a fulltext search on tblPages.SELECT * FROM tblPages,FREETEXTTABLE(tblPages, *,@searchTerm) searchTableWHERE [KEY] = tblPages.PageID ORDER BY RANK DESCWhere PageID is the primary key.The synax is correct but why does it never return any results?thanksmarc
Using CONTAINS, we can search for "never*" and we will find "nevertheless".However, I would like to do the inverse: "*less" should also find"nevertheless". Strangely, I can't find that in the doc and it does not seemto work.Am I getting something wrong? Or is this really not possible?Thanks a lot for your hints,Matthias HaldimannPS: This "*whatever" search may not look THAT useful in English, but it isvery important for searches within German nouns.
Can I get a documentation about full text capacity and limitation like memory utilization, number of catalogs per server, no of rows in each catlaog for SQL Server 2000.
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2 Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid. Msg 3156, Level 16, State 50, Line 2 File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file. Msg 3119, Level 16, State 1, Line 2 Problems were identified while planning for the RESTORE statement. Previous messages provide details. Msg 3013, Level 16, State 1, Line 2 RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
Issue when building a FCI where after the step of specifying what drives the data, logs, tempdb go, the installer errors with this message:
Exit message: The volume that contains SQL Server data directory D:SQL_DataMSSQL11.MSSQLSERVERMSSQLDATA does not belong to the cluster group.
We are running Windows Server 2012 R2 and SQL Server 2012 Enterprise with Veritas Storage Foundation for Windows 6.1. I've confirmed that the disk group exists and is mounted in Windows and presented as available storage. Symantec has an article detailing this same circumstance but the Microsoft KB article that they refer to only has hotfixes for Windows Server 2012, not R2.
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
Hi,I'm doing a search function for recipe database and have the query:1 SELECT K.RANK, tRecipe.sHeadline, tRecipe.sIngredients, tRecipe.sImagePath 2 FROM tRecipe 3 INNER JOIN 4 FaktaRecipe ON tRecipe.iRecipeID = FaktaRecipe.iRecipe 5 INNER JOIN 6 CONTAINSTABLE(tRecipe, *, 'ISABOUT (chick* WEIGHT(0.2))') AS K 7 ON tRecipe.iRecipeID = K.[KEY] 8 WHERE (FaktaRecipe.iRecipeFakta = 5) 9 ORDER BY RANK DESC I want to return records like 'chicken pie' etc, hence using the wildcard in chick* BUT the wildcard doesn't work! It works fine if I use the whole word 'chicken' but of course a user won't always do that... I am using SQL server 2000. Any ideas? - I'm tearing my hair out! Thanks,Paul
Hi, I created the following table in which i created full text indexing for DocDatafld and TypeColumn was used as Type Column for DocDataFld field. I store Document name in the DocumentTitlefld and want to get the Document name and Document and want to display it in the front end application and give url for the document. Documentidfld bigint Documenttitlefld varchar MimeTypefld varchar DocDatafld varbinary(MAX) TypeColumn varchar and i am using the following query to get the contents, but not able to get the column values. select documenttitlefld,docdatafld from Documentdatatbl Freetext(DocDatafld,'C') Please help
I cna't seem to ungrey the fts option. I've checked that mssearch is running and using the stored procs to manage fts results in
Server: Msg 7609, Level 17, State 2, Procedure sp_fulltext_database, Line 46 Full-Text Search is not installed, or a full-text component cannot be loaded.
I'm trying to do a fulltext search which returns the adjacent words also in the result, like u do a google search and it returns the paragraph containing the searched phrase.
