<asp:SqlDataSource ID="dsBorrowers" runat="server"
SelectCommand="SELECT * FROM [BORROWERS]"
ConnectionString="<%$ ConnectionStrings:OxfordLibrary %>">
</asp:SqlDataSource>
if i put this code inside source code then i can bind my gridview
i want to bind gridview when button is clicked using a sqldatasource control
could please tell me the way i can do it
hi ,
i am trying for a drill through report (rdlc)
ihave written the following code in drill through event of reportviewer, whenever i click on the first report iam getting the error like
An error has occurred during report processing.
A data source instance has no
t been supplied for the data source "DetailDS_get_orderdetail".
the code is
using System;
using System.Data;
using System.Data.SqlClient;
using System.Configuration;
using System.Collections;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
//using Microsoft.ApplicationBlocks.Data;
using Microsoft.Reporting.WebForms;
using DAC;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
ReportViewer1.Visible = false;
}
protected void Button1_Click(object sender, EventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
DataSet ds = new DataSet();
ds = obj.get_order();
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DataSet1_get_order", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = "C:/Documents and Settings/km63096/My Documents/Visual Studio 2005/WebSites/drillthrurep/Report.rdlc";
ReportViewer1.LocalReport.Refresh();
ReportViewer1.Visible = true;
}
protected void ReportViewer1_Drillthrough(object sender, DrillthroughEventArgs e)
{
DAC.clsReportsWoman obj = new clsReportsWoman();
ReportParameterInfoCollection DrillThroughValues =
e.Report.GetParameters();
foreach (ReportParameterInfo d in DrillThroughValues)
{
Label1.Text = d.Values[0].ToString().Trim();
}
LocalReport localreport = (LocalReport)e.Report;
string order_id = Label1.Text;
DataSet ds = new DataSet();
ds = obj.get_orderdetail(order_id);
ReportViewer1.LocalReport.DataSources.Clear();
ReportDataSource reds = new ReportDataSource("DetailDS_get_orderdetail", ds.Tables[0]);
ReportViewer1.LocalReport.DataSources.Add(reds);
ReportViewer1.LocalReport.ReportPath = Server.MapPath(@"Reportlevel1.rdlc");
ReportViewer1.LocalReport.Refresh();
}
}
the code in method get_orderdetail(order_id) is
public DataSet get_orderdetail(string order_id)
{
SqlCommand cmd = new SqlCommand();
DataSet ds = new DataSet();
cmd.Parameters.Add("@order_id", SqlDbType.VarChar, 50);
cmd.Parameters["@order_id"].Value = order_id;
ds = SQLHelper.ExecuteAdapter(cmd, CommandType.StoredProcedure, "dbo.get_orderdetail");
return (ds);
}pls help me.
,
Hi
In this code how can I create a new data source and new data source view and model and structure that it run dynamic.
In this code I have a lot of errors, that they are about server and database don€™t have in current code,
In this code, first I should definition server or no?
Database dbNew = new Database (databaseName,
Utils.GetSyntacticallyValidID(databaseName, typeof(Database)));
srv.Databases.Add(dbNew);
dbNew.Update(true);
***********************************************************
How can I create data source and data source view and model and structure?
Please say code of that, and guide me.
databasename and srv is unknown.
Do I add other reference with analysis services?
Please explain about these codes:
************************************************************************
1)
RelationalDataSource dsNew = new RelationalDataSource(
datasourceName,
Utils.GetSyntacticallyValidID(
datasourceName,
typeof(RelationalDataSource)));
db.DataSources.Add(dsNew);
dsNew.ConnectionString = connectionString;
dsNew.Update();
2)
RelationalDataSourceView rdsv;
rdsv = db.DataSourceViews.Add(
datasourceviewName,
Utils.GetSyntacticallyValidID(
datasourceviewName,
typeof(RelationalDataSourceView)));
rdsv.DataSourceID = ds.ID
***************************************************************
3)
OleDbConnection cn = new OleDbConnection(ds.ConnectionString);
OleDbCommand cmd = new OleDbCommand(
"SELECT * FROM [" + tableName + "] WHERE 0=1", cn);
OleDbDataAdapter ad = new OleDbDataAdapter(cmd);
DataSet dss = new DataSet();
ad.FillSchema(dss, SchemaType.Source);
*************************************************************
4)
// Make sure we have the name we thought
dss.Tables[0].TableName = tableName;
// Clone here - the original DataTable already belongs to a DataSet
rdsv.Schema.Tables.Add(dss.Tables[tableName].Clone());
rdsv.Update();
5)
MiningStructure ms = db.MiningStructures.Add(miningstructureName, Utils.GetSyntacticallyValidID(miningstructureName,
typeof(MiningStructure)));
ms.Source = new DataSourceViewBinding(dsv.ID);
ms.CaseTableName = "Customer";
Add columns:
ScalarMiningStructureColumn smsc;
// From table "Customer" we will add a couple of columns
// CustomerID - key
smsc = new ScalarMiningStructureColumn("Customer ID",
Utils.GetSyntacticallyValidID("Customer ID", typeof(ScalarMiningStructureColumn)));
smsc.IsKey = true;
smsc.Content = "Key";
smsc.KeyColumns.Add("Customer", "customer_id", OleDbType.Integer);
ms.Columns.Add(smsc);
*******************************************
6)
MiningModel mm = ms.MiningModels.Add(miningmodelName,
Utils.GetSyntacticallyValidID(miningmodelName,
typeof(MiningModel)));
mm.Algorithm = "Microsoft_Decision_Trees";
mm.Parameters.Add("COMPLEXITY_PENALTY", 0.3);
MiningModelColumn mc = new MiningModelColumn("Customer ID",
Utils.GetSyntacticallyValidID("CustomerID",
typeof(MiningModelColumn)));
mc.SourceColumnID = ms.Columns["Customer ID"].ID;
mc.Usage = "Key";
mm.Columns.Add(mc);
mm.Update();
Please exactly say, whatever I want
Thanks a lot for your answer
Please don€™t move this question because I don€™t know where I should write this.
I have set up a new connection as a connection from data source, but I cannot see how to use this connection to create my Data Flow Source. I have tried using an OLE DB connection, but this is painfully slow! The process of loading 10,000 rows takes 14 - 15 minutes. The same process in Access using SQL on a linked table via DSN takes 45 seconds.
Have I missed something in my set up of the OLE DB source / connection? Will a DSN source be faster?
Thanks in advance
ADG
hi everybody,
i want to create data source and data source view for data mining, with using C Sharp.
i have create data source and data source view and export to XML file, but when i change to another computer, run those XML file, it return error, when i run statement to create and biuld mining model, what can i change on xml or how to run XML on another computer sucessfully,
and have i build data source and data source view, how to do it.?
thanks for you helps
Today I was making a few reports.
When I tested the reports in Visual Studio, they worked great: I got the expected result.
But when I deployed the reports to our reportserver the problem started.
When I click on the directory in which my reports are deployed, I got my 4 reports.
Till now everything worked correct.
But when I click on a report to view the results it went wrong.
I got an error:
"Cannot create a connection to data source 'Live'"
(Live is the name of our data source).
We are using the Windows Logons and I am sure that I have all the rights on the server, I gave myself 'sysadmin' rights, so it should work.
I also have tried it with all the roles assigned on my account, but then it still won't work.
When I modify the data source, and set it to another server en database it works.
The datasource 'Live' exists on a x64 MsSQL server, en the other datasource is on a x86 MsSQL server.
Maybe that is the problem?
Can someone tell me what is wrong?
Hi there,
I'm trying to build a report for Windows Forms (C#) using .rdlc files.
But every time I run it, I get this error message. I've followed the step-by-step from MSDN instructions... but it doesn't work!
Could anyone help me?!
Tks a lot!
Luis Antonio - Brazil
I was trying to load data using SSIS, Data Flow Task, OLE DB Source, source was a view to a OLE DB Destination (SQL Server). This view returns 420,591 rows from Query Analyzer in 21 seconds. Row length is 925. When I try to executed the Data Flow Task from SSIS, I had to stop the process after 30 minutes, because only 2,000 rows had been retrieved. I modified the view to retun top 440, 000 and reran. This time all 420, 591 rows were retrieved and written in 22 seconds. Next, I tried to use a TOP 100 Percent. Again, only 2,000 rows were return after 30 minutes. TempDB is on a separate SAN Raid group with 200 gig free, Databases on a separate drive with 200 gig free. Server has 13 gig of memory and no other processes were executing.
The only way I could populate the table was by using an Execute SQL Task and hard code an Insert into table selecting data from the view (35 seconds) from SSIS.
Have anyone else experience this or a similar issue? Anyone have a solutionexplanation?
Hi all, i got this error:
[DTS.Pipeline] Error: "component "Excel Source" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
and also this:
[Excel Source [1]] Warning: The external metadata column collection is out of synchronization with the data source columns. The column "Fiscal Week" needs to be updated in the external metadata column collection. The column "Fiscal Year" needs to be updated in the external metadata column collection. The column "1st level" needs to be added to the external metadata column collection. The column "2nd level" needs to be added to the external metadata column collection. The column "3rd level" needs to be added to the external metadata column collection. The "external metadata column "1st Level" (16745)" needs to be removed from the external metadata column collection. The "external metadata column "3rd Level" (16609)" needs to be removed from the external metadata column collection. The "external metadata column "2nd Level" (16272)" needs to be removed from the external metadata column collection.
I tried going data flow->excel connection->advanced editor for excel source-> input and output properties and tried to refresh the columns affected.
It seems that somehow the 3 columns are not read in from the source file?
ans alslo fiscal year, fiscal week is not set up up properly in my data destination?
anyone faced such errors before?
Thanks
RE: XML Data source .. Expression? Variable? Connection? Error: unable to read the XML data.
I want my XML Data source to be an expression as i will be looping through a directory of xml files.
I don't see the expression property or the connection property??
I tried setting the XMLData property to @[User::filename], but that results in:
Information: 0x40043006 at Load XML Files, DTS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC02090D0 at Load XML Files, XML Source [108]: The component "XML Source" (108) was unable to read the XML data.
Error: 0xC0047019 at Load XML Files, DTS.Pipeline: component "XML Source" (108) failed the prepare phase and returned error code 0xC02090D0.
Information: 0x4004300B at Load XML Files, DTS.Pipeline: "component "OLE DB Destination" (341)" wrote 0 rows.
Task failed: Load XML Files
Information: 0xC002F30E at Bad, File System Task: File or directory "d:jcpxmlLoadjcp2.xml.bad" was deleted.
Warning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "Package.dtsx" finished: Failure.
The program '[3312] Package.dtsx: DTS' has exited with code 0 (0x0).
Thanks for any help or information.
I've question about how to handle structural datamodel changes in a datasource of PowerPivot. Suppose I'm developing a starmodel in SQL Server and sometimes a datatype changes or a name of a field changes in a table. It seems to me that PowerPivot handle this not gracefully as Analysis MD does (mostly). I received an error because of a wrong fieldname or even no error when a dattype changes in PowerPivot. Is this common or do I something wrong here. Does this mean that every time the datamodel changes the PowerPivot should be recreated? Or am I missing the clue here?
View 6 Replies View RelatedWas wondering if there was a best practice minimum permissions for creating a SQL login to use when setting up a new shared Data source for SSRS report manager?
Something along the lines of them being a data read for the DB and permissions to update tempdb?
Would have thought it not advisable to have the login be able to update the main db...
I have 4 Tablix and 2 of the Tablix get data from Server 1 and other 2 get the data from Server 2.I have set NoRowsMessage "=Data Not Available for the Selected Values"  for all the 4 Tablix.Now if data is not available from Server 1 then I must show "Data Not Available for the Selected Values" only once in the  outputbut now its appearing twice in the output because of the 2 tablix that had no rows.Similarly if data not available from Server 2 then it should show "Data Not Available for the Selected Values" only once in my output.If Data not avilable from all the Tablix then also i t should show only once as "Data Not Available for the Selected Values" in the report output.
View 3 Replies View RelatedA data reader is using a connection manager to connect to an ODBC System DSN . A query in the SqlCommand property is provided. Data is being truncated in the only string column . The data type in data reader output-->external columns shows as Unicode string [DT_WSTR] Length 7.
The truncated output in a text file is the first 3 characters from left to right . Changing the column order has no effect.
A linked server was created in SQL Server Management Studio to test the ODBC System DSN using the following:
EXEC sp_addlinkedserver
@server = 'server_name',
@srvproduct = '',
@provider = 'MSDASQL',
@datasrc = 'odbc_dsn_name'
Data returned using "OPENQUERY" does not truncate the string column indicating that the ODBC Driver returns data as expected with sql 2005, but not with the Data Reader.
Any assistance would be appreciated.
Thanks,
I need to see inside a SSIS 2012 project a new SSIS installed component, but in the SSDT 2010 I cannot see the SSIS Data Flow Items tab for adding data source/data destination respect to the choose toolbox items pane.
View 4 Replies View Related
Hi i am trying to do a straight forward load from a Flatfile source , i have defined the columns according to the lenghts defined in the Data Dictionary Provided but when i am trying to run the Task i am encounterring this error
The column data for column "Column 20" overflowed the disk I/O buffer.
I tried to add another column 21 at the end and truncate or leave that column unmapped to destination but the same problem occurs for column 21 what should i do to over come this .
In case of Bad Data how to clean up the source.. Please help me with this
I've got a report that is using a cube as a data source and I can't get the report to show all the data. Only data at the lowest level of the cube is displayed. The problem is that most of the data I'm concerned with is at higher levels. There's no problem with the MDX. I get the correct results when I run the query.
I'm using a table to show the results. I've also tried a matrix, but I get the same results. I'm using SSRS 2005 and SSAS 2000.
Anyone have experience with this? Am I missing something simple?
Hi,
I am pretty new to SSIS. I am trying to create a package which can accept data in any of several formats. i.e. CSV, Excel, a SQL Server database/table and import the data into my destination database.
So far i've managed to get this working OK. However I am now TOTALLY stuck. I'm currently trying to just concentrate on the data sources being a CSV (using a Flat File Data Source) and/or an Excel Spreadsheet.
I can get the data in and to my destination using a UNION ALL component and mapping the data sources to it so long as both the CSV file and the Excel spreadsheet exist.
My problem is that I need my package to handle the possibility that only the CSV file might exist and there is no Excel spreadsheet. In which case i'd like the package to ignore the Excel datasource completely. Currently either of my data sources do not exist I get errors and the package terminates.
Is there any way in SSIS that I can check all my data sources to see which ones exist (i.e. are valid). If they exist I want to use them. If it doesn't exist i'd like to disgard it (without error - as long as there is a single datasource the package should run)
I've tried using the AcquireConnection method in a script task on each of my connections, hoping that it would error if the file/datasource did not exist. It doesn't though (in the case of an Excel datasource it just creates a empty excel file for me).
The only other option I can come up with are to have seperate packages depending on the type of data we want to import and then run a particular package depending on the format of the source data. This seems a bit long winded. I am pretty sure I must be able to do what I want to achieve but I can't work out how.
I'll be grateful to anyone who can send me any tips/hints/links on how I can achieve this.
Many thanks
Rob Gibson
I have an source file and i have to load it into the data base by changing datatype of the columns in ssis
View 1 Replies View RelatedI am new to SSIS programming, so bear with me if my question seems naive to you gurus. I have a situation that needs to set the data source for a data flow from external .NET application ('external' means that the application will run on different process than the SSIS). I am trying to set the data source on which the data flow works from my C# application in a DataSet format. Ideal solution is not to save the DataSet to any file on harddisk (I know that will work, but has the overhead of writing, reading and managing the temp file). What I want to achive is that the business logic of picking data for SSIS Data Flow to process is controlled inside my C# application, the Data Flow just does what it does best - Transformation. Have any of you successfully done this before?. Thanks!
View 1 Replies View RelatedI have a stored procedure that receives an input parameter of ReporID and then sends back the appropriate dataset to the data-driven subscription. In the stored procedure, there is some concatenated sql in producting the final select statement to send to the subscription, but it is generating the following error:
The dataset cannot be generated. An error occurred while connecting to a data source, or the query is not valid for the data source. (rsCannotPrepareQuery) Get Online Help
Insert Error: Column name or number of supplied values does not match table definition.
Because there are some optional columns that need to conditionally appear based on the report, I can't avoid concatenation. My only other option is to have hundreds of individual tables to source all our reports, which I don't have time to manage.
Please let me know how I can allow the data-driven subscription setup process to discover the columns for my concatenated SQL so I can seutp my schedules based on the single stored procedure with all my logic nested in my table structure.
Thanks.
I'm new to sql server. Last week I made my first cube. Everything went fine. But when I want to explore the cube (from the explore panel in Visual Studio 2012) in Excel then I'm getting the error "Initialization of the data source failed".
Check your database server or contact your database administrator. Make sure the external database is available, and then try the operation again. If you see this message again, create a new datasource to connect to the database.
I'm using Sql Server 2012. Visual studio 2012. Excel 2013 on Windows 10
Hi, i'm wondering which is the best way to search data in a SQL Server.
I reach data using Data Sources and Data Views and also with OLE DB Source with a Data access mode: Named query.
I have to write the data into a Flat File. So, does any one knows which is the best practice for this? Or any one of the two are good choices?
Thanks for your help.
Beli
I have created a SSIS package that transfer data from a Foxpro database to an instance of SQL Server 2005 Express. I used the wizard to create the package but I load and execute the package within a custom application that I have written in C#.
The way the custom application is intended to work is that the user can have the database in any location on the computer and all he has to do is specify the location then the application programatically changes the location of the source on the package that it has loaded and then execute it. When I initially run the package the first time (using the original path), it works fine and transfers the data. However, every subsequent time I run the application and specify a different path, the database on the SQL Server side gets created as expected but the data is not transfered!
Where am I going wrong? Do I need to save the package after I modify the source then reload and run it again or do i need to change something else in the Data Flow to make this work?
I am having a very wierd issue regarding a DB2 sql query. I need to get data from Db2 and insert into our sql server database. Using data flow task, to get data I am using the data reader source. COnnection is ado.netodbc connection.
THis sql query also has some comments in it.
The first wierd thing is...
1. On Development server, when I run this query manually, meaning using toad, winsql (connection to the db2 database), the query runs fine. Brings back approx 667 rows which is correct. ON the same server when I try to run this query, via a SSIS pkg, data flow task, using data reader source, gives me error on those comments that exist in that query. But if I run the same SSIS pkg on another server (Integration server). It runs fine. The same pkg also runs fine if I run it from my machine. SO What is different on my Dev server compared to the Integration server.
2. Say if I take those comments out from the sql query, then try to run the ssis pkg. The query is stuck at the first record and goes in an infinite loop mode. though my query is not a procedure, it is just a sql statement. But this ssis pkg with the query runs absolutly fine on the other server. I aslo tried using the other types of connection and ole db source but still the same problem on the Dev server.
What do I need to look for that is so different on the dev server compare to the INT server. I also checked the version on both these server for Visual Studio 2005(by going to About Microsoft Visual Studio), it is the same.
This is what I have on both the servers....
Microsoft SQL Server Integration Services Designer
Version 9.00.3042.00
Please HELP !!!!
Thank you.
Jinita
hi all,
i have a package in ssis that needs to deliver data from outside servers with odbc connection. i have desined the package with dataflow object that includes inside a datareader source. the data reader source connect via ado.net odbc connection to the ouside servers and makes a query like: select * from x where y=? and then i pass the data to my sql server. my question is like the following:
how do i config the datasource reader or the dataflow so it will recognize an input value to my above query? i.e for example:
select * from x where y=5 (5 is a global variable that i have inside the package). i did not see anywhere where can i do it.
please help,
tomer
Can anyone provide an expample of bulk copying XML data to a SQL table. I am also looking at using column mapping so that I can map fields and also insert a new GUID into the key of the SQL table.
Many thanks
I am trying to manipulate the data being imported from another data source. See below:
I need to make an IF THEN statement: If KeyDate =< 01/01/2013 THEN STATUS = 'Disposed'
Notice I am adding data in the last column as everything is 'Active'
SELECT dbo.UserConfig.Id,
dbo.UserConfig.ServerConfigId, dbo.UserConfig.DisplayName,
dbo.UserConfig.UserName, dbo.UserConfig.MailboxSMTPAddr,
dbo.UserConfig.OverrideSMTPAddr,
[Code] ....
Recently I installed the .NET data provider for Teradata.
In a regular C# application I can add the namespace, "using
Teradata.Client.Provider;" to connect to this data provider
directly without going though ODBC or OLD DB so I know it works.
However, when I open Reporting Services (new project -> Business Intelligence
Projects) I do not see how to add the Teradata .NET provider. I only
see the same standard data types as before. I have searched and I do
not see how to add the Teradata .NET provider to the available "Type"
list when you click €śAdd New Data Source€? to your report.
Thanks!
Okay, this should be really simple but I don't get it. How do I use an ODBC data source in an SSIS data flow task? When I look at Data Flow Sources I see the following options:
Pointer
DataReader Source
Excel Source
Flat File Source
OLE DB Source
Raw File Source
XML Source
Which one do I use if I need to get the data from a connection manager that is ODBC based? The IBM OLEDB driver for the AS400 doesn't work correctly so I HAVE to use an ODBC driver to connect to an AS400 data source.
Thanks in advance for any info.
i'm trying to load data into a sql database using an xml data source.
here's the file location: http://www.ecb.int/stats/eurofxref/eurofxref-daily.xml
the xsd (generated by visual studio) is below.
All outputs generate 0 rows inserted into an OLE DB destination, and there are no errors thrown.. What am i missing? Thanks!
<?xml version="1.0" encoding="utf-8"?>
<xs:schema xmlns:tns="http://www.ecb.int/vocabulary/2002-08-01/eurofxref" attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://www.ecb.int/vocabulary/2002-08-01/eurofxref" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="Cube">
<xs:complexType>
<xs:sequence>
<xs:element name="Cube">
<xs:complexType>
<xs:sequence>
<xs:element maxOccurs="unbounded" name="Cube">
<xs:complexType>
<xs:attribute name="currency" type="xs:string" use="required" />
<xs:attribute name="rate" type="xs:decimal" use="required" />
</xs:complexType>
</xs:element>
</xs:sequence>
<xs:attribute name="time" type="xs:date" use="required" />
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
I created a SSIS package, it calls for web service which creates an .xml file, then I use XML source to point to the xml file and want it to be imported to a table, but data won€™t go into the database table. I believe it€™s something wrong with the xml file format, but don€™t know how to change it. Here is what the .xml file like:
<?xml version="1.0" encoding="utf-16"?>
<DataSet>
<xs:schema id="NewDataSet" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
<xs:element name="NewDataSet" msdata:IsDataSet="true" msdata:UseCurrentLocale="true">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:element name="Table">
<xs:complexType>
<xs:sequence>
<xs:element name="DateFrom" type="xs:dateTime" minOccurs="0" />
<xs:element name="DateTo" type="xs:dateTime" minOccurs="0" />
<xs:element name="FiscalYear" type="xs:short" minOccurs="0" />
<xs:element name="FiscalPeriod" type="xs:short" minOccurs="0" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
<diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
<NewDataSet>
<Table diffgr:id="Table1" msdata:rowOrder="0">
<DateFrom>2002-12-28T00:00:00-06:00</DateFrom>
<DateTo>2003-01-31T00:00:00-06:00</DateTo>
<FiscalYear>2003</FiscalYear>
<FiscalPeriod>1</FiscalPeriod>
</Table>
<Table diffgr:id="Table2" msdata:rowOrder="1">
<DateFrom>2003-02-01T00:00:00-06:00</DateFrom>
<DateTo>2003-02-28T00:00:00-06:00</DateTo>
<FiscalYear>2003</FiscalYear>
<FiscalPeriod>2</FiscalPeriod>
</Table>
<Table diffgr:id="Table3" msdata:rowOrder="2">
<DateFrom>2003-03-01T00:00:00-06:00</DateFrom>
<DateTo>2003-03-28T00:00:00-06:00</DateTo>
<FiscalYear>2003</FiscalYear>
<FiscalPeriod>3</FiscalPeriod>
</Table>
</NewDataSet>
</diffgr:diffgram>
</DataSet>
I am coding a VB.Net 2005 application.Is it possible to configure a SQLDataSource to point to a connection string specified in the web.config file?
View 3 Replies View Related