Sql Install From Command Prompt
Jun 18, 2008Please let me know how to install sql server by using command prompt.
View 4 Replies
ADVERTISEMENT
Installing SQL Server 2005 Express Via Command Prompt (silent / Basic GUI Install)
Feb 20, 2008Hi,
I would be very grateful if someone could take a look at my command line install and offer advice on if I am doing it correctly.
The reason I am asking is because I cannot seem to get the server installed without having errors during the installation:
"The SQL Server (MSSQLSERVER) service terminated with service-specific error 17113 (0x42D9)"
Looking at the server error log indicates that master.mdf was not in the data directory (I have however specified a different data directory for ease of backup by our software and this is created during the install but does not have this database in the data directory - it is however in the template data directory!
I also get this error when the SQL Server service is started:
"The SQL Server (SQLEXPRESS) service terminated with service-specific error 3417 (0xD59)."
All advice is welcome. Please see below my batch file. Also, if you think I should do this in a different way then please let me know. I basically want to install SQL server on a customer computer and automate the install so the custoemr does not need to enter any information.
The goal of this install is:
[1] Deply a custom .Net application and SQL server at the same time on the same computer without user input.
[2] Allow remote .Net applications (designed by myself also) to connect over a LAN (and later maybe over a WAN) to the database to the above database.
The command line is this (I have also included the batch file I am usign below). For ease of reading I have put the parameters on a new line below:
setup.exe /qb
username="CustomerUsername"
companyname="OurCompany"
addlocal="SQL_Engine,SQL_Data_Files,SQL_Replication,Connectivity,SDK"
disablenetworkprotocols="0"
instancename="MSSQLSERVER"
INSTALLSQLDATADIR="c:SqlData"
USESYSDB="c:SqlData"
SAVESYSDB="1"
SQLAUTOSTART="1"
SECURITYMODE="SQL"
SAPWD="#StrongPaSSword#"
======= Batch file Start ======
SET MODE=/qb
SET SETUP_EXE=sqlfilessetup.exe %MODE%
SET SQLDATADIR=c:SqlData
SET SET_USERNAME=username="CustomerUsername"
SET SET_COMPANYNAME=companyname="OurCompany"
SET SET_ADDLOCAL=addlocal="SQL_Engine,SQL_Data_Files,SQL_Replication,Connectivity,SDK"
SET SET_DISABLENETWORKPROTOCOLS=disablenetworkprotocols="0"
SET SET_INSTANCENAME=instancename="MSSQLSERVER"
SET SET_INSTALLSQLDATADIR=INSTALLSQLDATADIR="%SQLDATADIR%"
SET SET_SAVESYSDB=SAVESYSDB="1"
SET SET_USESYSDB=USESYSDB="%SQLDATADIR%"
SET SET_SQLAUTOSTART=SQLAUTOSTART="1"
SET SET_SECURITYMODE=SECURITYMODE="SQL"
@REM === RE-INSTALL PARAMS - NOT CURRENTLY BEING USED?? SHOULD I ADD THESE ALSO? ===
SET SET_REINSTALLMODE=REINSTALLMODE="omus"
SET SET_REINSTALL=REINSTALL="SQL_Engine,SQL_Data_Files,SQL_Replication,Connectivity,SDK"
SET SET_REBUILDDATABASE=REBUILDDATABASE="1"
SET SET_SAPWD=SAPWD="#StrongPaSSword#"
@REM === START THE SETUP / RE-INSTALL ===
START %SETUP_EXE% %SET_USERNAME% %SET_COMPANYNAME% %SET_ADDLOCAL% %SET_DISABLENETWORKPROTOCOLS% %SET_INSTANCENAME% %SET_INSTALLSQLDATADIR% %SET_USESYSDB% %SET_SAVESYSDB% %SET_SQLAUTOSTART% %SET_SECURITYMODE% %SET_SAPWD%
======= Batch file End ======
Your advice is kindly welcome.
Thank you
Kind regards
Paul
Visual Studio 2005 Command Prompt Missing From SQL Server 2005 Express Toolkit Install
May 10, 2006The program shortcut "Visual Studio 2005 Command Prompt" seems to be mising from the "Visual Studio 2005 Command Prompt" Start menu added by the current Microsoft SQL Server 2005 Express Edition Toolkit. Where is it? How to workaround?
I am trying to do Download details SQL Server 2005 Samples and Sample Databases (April 2006) -> GettingStartedWithSQLSamples.htm which says "a. Open a Microsoft Visual Studio 2005 command prompt. Click Start, point to All Programs, point to Microsoft Visual Studio 2005, point to Visual Studio Tools, and then click Visual Studio 2005 Command Prompt." but I can find no such command prompt within "Visual Studio Tools", only "Visual Studio 2005 Remote Debugger{, Configuration Wizard}".
What's wrong? How to fix or workaround? I'd install .NET SDK 2.0 to get it's Command Prompt but that's about 570MB merely for a command prompt!
Thanks for your help, -Mike Parker
BCP Utility & Command Prompt
Dec 7, 2000Can anyone tell me how to enable bcp utility. Because anytime I try to run BCP I get the following error messages: (BCP not enable). Also how can I get to SQL Server command prompt? I look forward to hearing from anyone.
View 2 Replies View RelatedRunning A DTS Job From Command Prompt
Oct 17, 2000Sorry for the new thread.
How to run a DTS job from command prompt? Any help is appreciated!
Thanks.
Start Job From The Command Prompt?
Feb 23, 2006I have a Microsoft SQL server that is setup, and inside it is a job. Inside the job is a bunch of lines of transact sql statements.
I would like to be able to start the job from the command prompt. Moreover, I do not want to have to create new files or modify anything that is existing. I just want to be able to have it set up so that a new user who installs the server and all of the job on their machine fresh, can just punch in the command to run the job.
I know I can copy the transact sql statements from the job, and run them through the command prompt, but that would be a poor way to do it, because if the statements in the job were ever modified, with this task being automated, the command prompt statements would be out of date.
So I just need a way to start the existing job from the command prompt. Is this possible? Maybe with OSQL?
BCP Problem Using Command Prompt
Mar 26, 2008I am have trouble configuring developer edition when trying to run a Bulk Copy through Command Prompt. I have configured remote connections within the surface area configuration and have created a firewall exception
I enter and run
bcp FileImportDB..Exam in "c:FileImportPracticeExamImportFile.txt" -T -c
then i get the following error message
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersDineen>bcp FileImportDB.Exam in "c:FileImportPracticeExamImportFile.t
xt" -T -c
SQLState = 08001, NativeError = 2
Error = [Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].
SQLState = HYT00, NativeError = 0
Error = [Microsoft][SQL Native Client]Login timeout expired
SQLState = 08001, NativeError = 2
Error = [Microsoft][SQL Native Client]An error has occurred while establishing a
connection to the server. When connecting to SQL Server 2005, this failure may
be caused by the fact that under the default settings SQL Server does not allow remote connections.
I am running developer edition on vista and Service pack 2, iam connecting to my instance with no problem.
Can someone please help
Kind regards
Rob
Running SQL Scripts From Command Prompt
Jul 25, 2006I have a requirment, when a user logs in to the pc, I want to run some SQL scripts which is been saved as a stored procedure on another pc. Could this be possible. I know in oracle you could do it using SQLLDR. Is there any way to do it in SQL?
Please advice. Any help is greatly appreciated.
Backing Up Database From Command Prompt
Sep 13, 2000Is there a way by which we can execute the backing up of database from the command prompt......
Suppose i need to do the below task. I can write a stored procedure and schedule it. But the situation demands to run from the command prompt. Is there a way out.
-- Create the backup device for the full MyNwind backup.
USE master
EXEC sp_addumpdevice 'disk', 'MyNwind_2', 'c:mssql7ackupMyNwind_2.dat'
-- Back up the full MyNwind database.
BACKUP DATABASE MyNwind TO MyNwind_2
-Rajesh
Running Sp From The Command Prompt (of Another Server)
Jan 23, 2001I have created linked servers and successfully run the following stored procedure.
exec [db-2001server].sales..sp_test
Can anyone give me the exact syntax for running the same from command promt(without using the query analyzer).I am new to isql/osql.So,please help me with the syntax.
Thanks!!
How To Import Database In Command Prompt?
Jan 7, 2001How to import database in command prompt?
View 1 Replies View RelatedSql Srvr 6.5 Only Runs From Command Prompt
Oct 11, 1999We have a development server that will only run SQL Server from a DOS command prompt. Each time I reboot the server the services don't autostart, and I am unable to start them manually using Service Manager. Does anyone know what I can do to fix this problem?
Thanks
Problem In Using Sqlmaint In Command Prompt
Feb 13, 2004Hi,
I try to backup DB (DatabaseA) in ServerA using sqlmaint utility in command prompt.
The sqlmaint.exe does reside in ..MssqlBinn Folder.
Below is the command i used (MS-DOS):
..Binn>sqlmaint -S ServerA -U "sa" -P "########" -D DatabaseA
-BkUpDB C:Temp -HtmlRpt BackupRpt.html
When I execute the command, it only shows a list of the commands as if I execute -? command. There's NO any other messages that indicate the backup command is being executed.
When I check in the C:Temp folder, there's no BackupRpt.html file.
Anyone got any idea?
Thanks.
Command Prompt Output Capture?
Jun 25, 2014How can i get the output (like 1 rows(s) inserted)in a file from an input file through sql command prompt.
View 1 Replies View RelatedExecute Sql Commands Through Command Prompt
Nov 15, 2007Hi,
I wanted to know if there is a way to execute sql commands on the operating system's command line. If it is possible, then how do we do it ? For example to execute a SELECT * from Table statement what are we supposed to do ?
Thanks
S
Help! SQLEXPRESS Command Prompt Installation!
Aug 8, 2007
i have a problem installing SQLEXPRESS via command prompt... the installation is successful but the 'sa' account could not login to the server.. here's the command in my batch file.
Code SnippetStart /wait <exe> /qb INSTANCENAME=MYINSTANCE ADDLOCAL=ALL *AUTOSTART=1 RSCONFIGURATION=DEFAULT SECURITYMODE=SQL SAPWD=sapwd SQLCOLLATION=Latin1_General_BIN requiresmsiengine=1
and one more thing, i need to run the report server automatically.. thanks!
Using The Command Prompt Via SQL Server Agent
Jun 4, 2007 I need to verify a csv file exists before I call a stored procedure to complete a bulk insert. The first step in the SP will be to verify the file exists (that particular "Job" step did not fail). I have only one step in the job that I have set the type as "Operating System (CmdExec)" and the Command is "Dir C:NAFCDMDataShipmentsCooperShipments.csv". When I execute the job manually to verify the proper operation I receive the error listed below. I know the path and file name are correct as I originally typed in the UNC, when it failed I copied it from the Address bar. I attempted to move the file to the root location without success. I attempted to use another file. I have attempted to rename the file. The DBAs will not allow me to use the SP_cmdshell stored procedure (that was my first thought).
I added 'Everyone' with Full Access to the root folder and propagated these permissions to all containing folders. This again did not allow the job to run. I changed the statment to "REN C:NAFCDMShipmentsShipment.csv Shipment1.csv". I continue to get the same error. Can someone Please point me in a direction to fix this problem?
"The process could not be created for step 1 of job 0x71D51027F920A140A2913234DB7FF509
(reason: The system cannot find the file specified). The step failed.
The job failed. The Job was invoked by User sa. The last step to run was step 1 (Verify the File's Existance)."
MSDE Installation Stops In Command Prompt
Aug 14, 2005Hi,I am trying to install MSDE from a CD. At the beginning I cunpack all files at C:sql2ksp3. Then in in Command promptI enter C:sql2ksp3MSDE> Setup SAPWD=Hello SecurityMode=SQL The problem is that nothing happens after that. When I press enter another line appears C:sql2ksp3MSDE>but that's about it.The installation does not continue. Does anybody know how to "push" it a bit so it will continue?Thanks
View 1 Replies View RelatedUnable To Run Command Prompt SQL Utility From SQL Agent
Mar 20, 2003I am unable to execute DTS packages,ISQLs when scheduled from SQL Server Agent . It dispalys a Dr.Watson Access Voilation message on the box .The result of the job is "failed as the step did not return any result ".
1)The utilities run fine when run from clients from other computers .
2)They fail again when run thru the command prompt of the box .
3)They suceed when run via the xp_cmdshell .
Can anybody help me out ?
Thanks,
Venkat
Calling SSIS Package Through Command Prompt
Feb 24, 2008All, I am developing the data mart refresh task in SSIS. I wanted to call the package in command prompt. I need help. Can any one give any tips on it. Thanks and appricate in advance.
Regards
Govind
Triggering SSRS Report From Command Prompt
Dec 17, 2007
Hi,
We have requirement where we need to run the SSRS report from Command Prompt. We are using Control + M, which is a scheduler runs only from DOS prompt.
Can anyone help us to know the procedure of doing this.
Thanks
Karthik
SQL Server Agent Accessing The Command Prompt
Jun 4, 2007I need to verify a csv file exists before I call a stored procedure to complete a bulk insert. The first step in the SP will be to verify the file exists (that particular "Job" step did not fail). I have only one step in the job that I have set the type as "Operating System (CmdExec)" and the Command is "Dir C:NAFCDMDataShipmentsCooperShipments.csv". When I execute the job manually to verify the proper operation I receive the error listed below. I know the path and file name are correct as I originally typed in the UNC, when it failed I copied it from the Address bar. I attempted to move the file to the root location without success. I attempted to use another file. I have attempted to rename the file. The DBAs will not allow me to use the SP_cmdshell stored procedure (that was my first thought).
I added 'Everyone' with Full Access to the root folder and propagated these permissions to all containing folders. This again did not allow the job to run. I changed the statment to "REN C:NAFCDMShipmentsShipment.csv Shipment1.csv". I continue to get the same error. Can someone Please point me in a direction to fix this problem?
"The process could not be created for step 1 of job 0x71D51027F920A140A2913234DB7FF509
(reason: The system cannot find the file specified). The step failed.
The job failed. The Job was invoked by User sa. The last step to run was step 1 (Verify the File's Existance)."
Installing SQL Express And Attaching A Mdf Db From The Command Prompt
Mar 21, 2007Hi,
I need to install a customed SQL server express instance on the client's computer by using the Command prompt installation. I've already defined the security settings and everything i need but i was wondering if is possible to attach a mdf database during the installation. Perhaps there is a paramenter i can include in the in the ini file.
Thank you
Login To SQL Server Express Using Command Prompt
Jun 30, 2006How can I login to SQL Server Express instance(localhostSqlExpress) using command prompt so that I can query database. Is there any alternative GUI tool for SQL Server Express Manager? (I think Microsoft has discontinued SQL Server Express Manager). I prefer using Command Prompt. I am using WindowsXP Professional.
View 8 Replies View RelatedHow Can I Connect To Sql Sever 2005 Express From The Command Prompt.
Apr 24, 2007Iam trying to connect to local copy of sql sever express from the command prompt with this command(sqlcmd) but i get the error below. What should i do to overcome the error. Basically what i want to do is to try out some commandline backup utilities and i deadly want to know how to do a backup from the command prompt. Help is greatly appreciated.
HResult 0x2, level 16, state 1
Named pipes provider: could not open a connection to sql sever [2]
sqlcmd: Error: Microsft sql native client: An error has occurred while estarblishing a connection to the sever. When connecting to sql sever 2005, this failure may be caused by the fact that under the default settings SQL sever does not allow remote connections..
Sqlcmd: Error: Microsoft sql native client: Login time out expired.
Errors While Running Ssis Packages From The Command Prompt.
Dec 23, 2005I have created ssis package. It has been successfully running at UI level.
But when i am trying to execute it from the command prompt by using dtexec utility it is showing the following error messages.
Error: 2005-12-23 17:01:57.67
Code: 0xC00470FE
Source: Data Flow Task DTS.Pipeline
Description: The product level is insufficient for component "Flat File Source" (1).
End Error
Error: 2005-12-23 17:01:57.67
Code: 0xC00470FE
Source: Data Flow Task DTS.Pipeline
Description: The product level is insufficient for component "Script Component" (9).
End Error
i have entered the command as follows.
dtexec /f "c:somefolderpackage1.dtsx"
Any points regarding this issue would be helpful.
Package Runs From Command Prompt, But Wouldn't From The Agent
Sep 20, 2007A strange thing is happening to us: we create a bat file that executes an SSIS package with multiple connection managers and tasks.
When calling the bat file from command prompt €“ the package runs just fine!
When calling the same bat file from SQL Server Agent (that runs under the same NT account as SSIS, and all other SQL services, and belongs to local Adminstrators), the package fails half way through with connection failed issue.
Plus it gives us something like this: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER
Has anyone ever experienced this issue, do you have any possible solutions?
Thank you!
Anastasia
Setting Service Account To LocalSystem Via Command Prompt
Dec 5, 2007
Hello,
I was wondering if there was any way to set the service account on sql server 2005 express to Local System via command prompt.
To giva some background to this issue, I am installing 2005 express via command prompt, however, the default service account is network I believe. However, when running this, I keep getting an "error 3415" whenever I try to attach a database, which states that the files are "read only", which they are not. However, when setting the service account to local or set the security mode to windows authenticaiton, I can attach just fine.
The parameters I use to install are pretty standard:
"/qb ADDLOCAL=ALL INSTANCENAME=<name>SAPWD=<pwrd> SECURITYMODE=SQL DISABLENETWORKPROTOCOLS=0 SQLAUTOSTART=1"
So I was wondering if there was some way to set the service account to local system to local using some command prompt parameter. OR if there was another way around the error 3415 that will enable me to attach a database, that I do not know about that I can use, preferrably via command prompt, but anything will be fine at this point.
Thank you all in advance.
SQL Server Express Edition Silently At Command Prompt
Sep 26, 2006I want to install the SQL Server Express Edition silently at command prompt (but want the dialog boxes, I mean with /qb option), locally, with no network options.
I want to install it with following options
i) In the Feature Selection, I need
a) Data file (Database Services)
b) Shared tools (Database Services)
c) Connectivity Components (Client Components)
d) Management Studio Express (Client Components)
ii) Instance name as €œDefault Instance€?
iii) Service Account as €œUse Built-in service accountà Local System€?
iv) Authentication Mode as €œMix mode€? with sa password as €˜sysadm€™
v) Collate Settings as €œLatin1_General_CS_AI
How could I achieve this using command prompt?
I already had done
start /wait setup.exe /qb ADDLOCAL=ALL SECURITYMODE=SQL SAPWD=sysadm SQLCOLLATION=Latin1_General_CS_AI
any other attribute need to add?
Regards,
Thanks.
Gurpreet S. Gill
SQLCMD Command Prompt Window Not Functioning Properly
Sep 15, 2007The MSDN Library topic Using the sqlcmd utility(SQL Server Express) states "To access the sqlcmd utility, click Start, click Run, and type sqlcmd.exe."
A command prompt window opens with "SQLCMD" in the title bar. I cannot enter anything in the command prompt window and the window remains open for only about five or six seconds.
The version I have installed is MS SQL Server 2005 Express with SP2. The cumulative updates package 3 does not list this problem, so I did not install it.
Msbuild And Sn Commands Are Not Recognized On Command Prompt. Please Advise.
Nov 14, 2005I have downloaded and "run" these programs:
View 6 Replies View RelatedRUN Intergration Services Deployment Manifest Through Command Prompt
Jun 26, 2007Hi, I want to run "Intergration Services Deployment Manifest" through the command prompt, passing the values .. which should basically go and install that Package either on File System or SQL Server. Does any one have any idea on how to do that ...
Thanks,
Installing And Configuring Reporting Services Using The Command Prompt
Jul 31, 2007Hello, I have a question regarding installing SQL Express with Advanced Services from the command prompt. I am executing a .cmd file which has the following syntax:
start /wait setup.exe /qb INSTANCENAME=Tim ADDLOCAL=SQL_Engine,Connectivity,RS_Server,RS_Web_Interface SAPWD=1StrongPassword_2 SECURITYMODE=SQL DISABLENETWORKPROTOCOLS=0
Yet, after the installation when I run the Reporting Services configuration tool, none of the settings for Reporting Services are set. I would like to be able to install Reporting Services from the command prompt and have it use the default settings for creating a default website just like you can through the User Interface using the Setup.exe but cannot seem to figure out what I am missing in my .cmd file?
I would appreciate any help anyone can provide.
Tim