have new sql 2005 install. I thought I setup the mail correctly. I setup an operator and could send test email to operator. I then setup a job to send email to the operator when job completes. Got the error below
Date 6/16/2006 8:45:57 AM
Log SQL Agent (Current - 6/16/2006 8:45:00 AM)
Message
[264] An attempt was made to send an email when no email session has been established
ANy help or links to setting up email on sql 2005
Hello, hoping someone might be able to help.
I've set up Database Mail on an instance of 2005 and the test mail works just fine. However, when testing a job (notify on fail, success, whatever) the mail fails to send. Job History last information reads NOTE: Failed to notify 'My Name' via email.
Checked out the Database Mail logs - nothing interesting.
Restarted the Agent service and then checked out the current Agent Log. Found message:
[260] Unable to start mail session (reason: No mail profile defined).
The 'DatabaseMailProfile' key is most certainly defined in the Registry
(at 'HKEY_LOCAL_MACHINE', N'SOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.1SQLServerAgent')
I'm at a loss...why is it telling me no mail profile defined?
I'd be most grateful for any help if anybody else has run across this problem.
Cheers,
Megan
Hi all,At this moment I'm trying to get database mail working. According tosome people it should be easy. Well...that is not the case for me.I'm having the following error:The mail could not be sent to the recipients because of the mail serverfailure. (Sending Mail using Account 2 (2006-11-24T08:48:15). ExceptionMessage: Cannot send mails to mail server. (Command not implemented.The server response was: Command not Supported).)SQL Server 2005 is installed on a separate server and the SMTP Serveris Lotus Notes. connecting with port 25.Start and stopping the SQL Server and SQL Server agent i tried already.i tried sysmail_stop_sp and sysmail_start_sp.Sometimes when starting or stopping the Mail with the followingcommands :exec sysmail_stop_spGOexec sysmail_start_spGOI will get the following error:Msg 233, Level 20, State 0, Line 0A transport-level error has occurred when sending the request to theserver. (provider: Shared Memory Provider, error: 0 - No process is onthe other end of the pipe.)So any help would be appreciated.Hennie
View 1 Replies View RelatedI've set up DB mail and sent a test e-mail and that comes through fine.
I set up an Operator with email Name: DWhelpton@k-and-s.com;MWeaver@k-and-s.com
I created a job and set up the notifications to e-mail the operator on failure.
When the job runs and fails, I do not get an e-mail and I get the following exception in the db mail log:
Date 2/2/2007 8:35:00 AM
Log Database Mail (Database Mail Log)
Log ID 402
Process ID 3936
Last Modified 2/2/2007 8:35:00 AM
Last Modified By NT AUTHORITYSYSTEM
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Could not retrieve item from the queue.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Controller.ICommand CreateSendMailCommand(Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DBSession)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
What step am I missing?
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
Hello,
On the development server, I am trying to work with subscriptions . Report Server is windows authenticated.
When no paramters exist for the report, the sucbscription is successful.
But if there are paramters for the report, email delivery fails.
These are not data driven subscriptions.
Did anyone face the same problem ? Can anyone tell me where to start debugging since logfiles just say failure to send the email.
Thanks,
SqlNew
I have create a SSIS package, for data export import process, but if my task get failed then i have to send a mail with proper error description as the SSIS generate in output window.
Can any one sugget me to, how can i store that error desciption in my variable.?
Thanks in advance.
I'm trying to get sql mail up and running. I am able to get the service started. But when I go under SQL Mail/Properties and test the profile that I created it comes back with the following error. Error 22030 a MAPI error(error 273) occurred. Unable to get the default MAPI Message store due to MAPI error. the information store could not be opened. I am running sql server 7.0. I have set up a profile under the exchange. If I bring up outlook on the server I can send and receive messages. I have the both the mssqlserver and the sqlserveragent running under the same account. If I go under operators and do a test on one of the operators I get the following message. The sqlmail session is not running but I sit it running under enterprise manager. We are using the outlook. Any ideas would be greatly appreciated. Thanks
View 4 Replies View RelatedI've just set up SQL Mail, and I think it's working -- at any rate, the envelope icon in Enterprise Manager
is green. Problem is, no matter what address I try to mail to, I get an 'Unknown recipient' error.
My input:
xp_sendmail 'srenaker@alexa.com', 'This is a test message.'
The results:
Msg 17914, Level 18, State 1
Unknown recipient: Parameter '@recipients', recipient 'srenaker@alexa.com'
Thanks in advance for any help,
Steve Renaker
srenaker@alexa.com
Hi everyone,
I am very new to this and am having a problem with SQL mail. I want to be able to send view or query results via email. I have set up SQL mail and tested it and it works fine for sending notification messages to me. When I go to a query analyzer and issue the xp_sendmail 'jyoungbar@shorehealth.org','this is a test message'
I always get the error that follows:
Server: Msg 18025, Level 16, State 1, Line 0
xp_sendmail: failed with mail error 0x8004011d
I am probably missing something very minor here. Can anyone help me??
Thanks,
Jason
I have configured sql 2005 to send Database mail via SMTP using a profile and account that works fine during a test send. However, when I set myself up as an opperator (with the same email as the test) and tell a job to email me upon sucess, and run the job I dont get the email.I looked at the error log, and get the error that: "an attempt was made to send an email when no email session has been established"Any help is greatly appreciated!Dan
View 2 Replies View RelatedI recently got the datamail setup and running. I am able to use database test mail to successfully send a test email relay through the SMTP port of the exchange server and then out to the appropriate email adress.
When i use the SP_Send_Dbmail it says Mail Queue. I check the sysmail_allitems it says the Sent_Status is sent but I never receive it.
Everything below executes just fine and places the right information in the right msdb tables. I just never receive the email. Any suggestions on where to look? Service_broker messages is enabled and i restart sqlserveragent also.
use msdb
go
exec msdb..sysmail_start_sp
go
EXEC msdb..sp_send_dbmail
@profile_name = 'DBuser'
@recipients = 'user@yahoo.com',
@subject = 'Test',
@body = 'Test',
@body_format = 'HTML'
I thought I knew.
Under SQL 2005 SSIS I can successfully send email (using their SNMP task). So I thought that was database mail. But the other day I started reading about Database mail and setting up profiles and it had nothing to do with SSIS tasks! So what is it all about?
TIA,
barkingdog
hi friends.... i had a problem with sending mail using trigger when Update data from a table. Procedure is executed successfully. but when i update record from a particular table. I had a following error xp_sendmail: Either there is no default mail client or the current mail
client cannot fulfill the messaging request. Please run Microsoft Outlook
and set it as the default mail client. (0 row(s) affected)
Can any one explain what's my problem and give me a solution for this.
it's Urgent !!!!!!!
Any help on the following error which I am getting when I am trying to set up SQL Mail for Internet Mail with Outlook Express?
Error 22030: A Mapi error(error no 271)occured.Unable to get the default MAPI Message store due to mapi error 271:One or more of the receipients was not found in the address book.
We have Lotus Notes,but not interested in hooking up to it.As we need to have only outgoing mail facility to outside parties through internet,please advice how to connect using SMTP server and outlook express.
Thanks!
Hi,
I recently installed MS SQL server version 7.00.623 on a Win2k server. I installed Outlook 2000 and had the Exchange Administrator create a mailbox in order to use SQL Mail and SQL Server Agent alerts when jobs fail. The Outlook mailbox was set up with a different name then the SQL Server Agent so I created a new account for the SQL Server Agent to match the name of the mailbox. I can send and receive mail from Outlook when logged into the server but I receive the following error when testing the profile in SQL Mail and SQL Server Agent properties:
"[260] Unable to start mail session (reason: Unable to logon (reason: Unable to get the default MAPI Message Store due to MAPI error 273: The information store could not be opened); check the mail profile and/or the SQLServerAgent service startup account)"
The SQL Server Agent account is a NT User type, uses NT Authentication and has sysadmin server privledges and I am attempting to configure the mail while logging in to the server via Terminal Services Client using this account. I have tried to stop and restart the SQL Server Agent services but still receive the same error. When I log into Outlook, I receive a dialog box titled "Enter Password" that asks for a user name, domain name and password. The Exchange Admin. set this up so I have to use my user name, domain and password.
Do I need to install a service pack for SQL Server?
Did changing the SQL Server Agent account cause this to fail?
Does anyone have any insight on why I cannot get SQL Mail configured?
Thank You So Much
Ive created an Account and a Profile using Configure Database Mail Wizard.
Ive tried to send an email using this account, but I get this error
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-09-13T17:05:09). Exception Message: Cannot send mails to mail server. (Server does not support secure connections.). )
Can anyone help?
Regards
Steve
Steve Fouracre
Hello,I have a question on what is the best way to send mail form my asp.net 2.0 application stored in sql2005 express:In one of my tables I have a DateField which contains a certain date. When the current date is within 1 hour of the stored date I would like to send an email.How should I implement this? I.e. writing code that opens a page every x time and perform a query that checks the date and send an email from there? Not the best way I guess..Or, using something like triggers. Or, using the SQl2005 mail component? I hope some of you experts can point me in the right direction.Many thanks already!
Leo
I have setup database mail on my SQL 2005 server. It works fine. I am using it to send subscription mail. If the email addresses are good, it works fine. If there is a bad email address rather then skipping that email address, it shuts down and quits the rest of the process.
Is there a way to configure it to log the error and move on? With SQL 2000 all it did was toss it into a queue and hope. The SMTP server dealt with the problems. Now it seems Database Mail is determining there is a problem and giving up.
While I love the new sysmail tables that allow me to track what happened, I hate the fact the the system decides if is too frightened by an error and it needs to runaway and hide. [:D]
Also, does anyone know of a good resource for describing the sysmail table relationships?
Thanks in advance for the help,
Thom
hi,
Very New to SQL MAIL... SQL SERVER 2005....
I am trying to set sql mail for my SQL server 2005.. i m on client machine...from here i got info for @@version
Microsoft SQL Server 2005 - 9.00.1406.00 (Intel X86) Mar 3 2007 18:40:02 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
I have created alerts (TestAlert),operator (TestOperator.. here i have mentioned my email id)
I have created simple JOB ..insert statement...owner as NT AUTHORITYSYSTEM...under alert I assigned TestAlert..under notification I assinged or checked my TestOperator...click ok
I also checked in Service Area Configuration Features .. Enable SQL Mail Stored Procedures...
But when i loggned in Query Analyser as Windows Login and fired
EXEC xp_startmail I got error like
Msg 17930, Level 16, State 1, Line 0
xp_startmail: Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client.
Also Under Legacy..SQL MAIL..when i right click I got error
TITLE: Microsoft SQL Server Management Studio
------------------------------
Cannot show requested dialog.
------------------------------
ADDITIONAL INFORMATION:
If a stored procedure could not be found, SQL Mail may not be installed in the instance. (SqlManagerUI)
------------------------------
xp_get_mapi_profiles: Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client. (Microsoft SQL Server, Error: 17930)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1406&EvtSrc=MSSQLServer&EvtID=17930&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
On my machine (its client machine) Outlook is configured but on server it is not....
Please suggest me best way to set SQL MAIL....I needed to set notification when any job executed as success....
T.I.A
I have a report server set with an smtp account with Alias set to False but will not allow me to send e-mail outside the network. E-mail report delivery works fine to any e-mail with @mycompany.com but to an e-mail like @hotmail.com it gets rejected saying e-mail not recognized. I tried all config possibilities know to this man but nothing works. If long into the smtp server itself I can send e-mails outside of company. I'm thinking it may require a password from SSRS config but there is no place to put one. Any one know how to config SSRS to deliver e-mails to any and all e-mails accounts?
View 1 Replies View RelatedI have setup database mail on my SQL 2005 server. It works fine. I am using it to send subscription mail. If the email addresses are good, it works fine. If there is a bad email address rather then skipping that email address, it shuts down and quits the rest of the process.
Is there a way to configure it to log the error and move on? With SQL 2000 all it did was toss it into a queue and hope. The SMTP server dealt with the problems. Now it seems Database Mail is determining there is a problem and giving up.
While I love the new sysmail tables that allow me to track what happened, I hate the fact the the system decides if is too frightened by an error and it needs to runaway and hide.
Also, does anyone know of a good resource for describing the sysmail table relationships?
Thanks in advance for the help,
Thom
Mail is getting 'stuck' in the unsent state. When I send a test mail or notification - the mail ends up in the sysmail table. If I manually double click on databasemail90.exe the email will be sent but for some reason this app is not being fired off automatically. I have tried disabling and re enabling service broker on msdb.
Running the following queries I get
SELECT * from sys.dm_broker_queue_monitors - no results.
SELECT * from sys.service_queues - expected results
InternalMailQueue 843150049 NULL 1 0 SQ SERVICE_QUEUE
ExternalMailQueue 875150163 NULL 1 0 SQ SERVICE_QUEUE
QueryNotificationErrorsQueue 1977058079 NULL 1 0 SQ SERVICE_QUEUE
EventNotificationErrorsQueue 2009058193 NULL 1 0 SQ SERVICE_QUEUE
ServiceBrokerQueue 2041058307 NULL 1 0 SQ SERVICE_QUEUE
Hi,
I have a requirement sql server 2005 in which i need to send a mail when ever there is an error in the procedure or job.
The mail should fire with the error attached to it.
could you please suggest the ways to handle this.
Please tell me the list of steps to configure and send the mail.
Thanks in advance.
Hi all.
We have a problem with our SQL2000 32 bit to SQL2005 64 bit migration where we use
xp_readmail to check mailboxes for new messages containing incoming
data. This is no longer supported in SQL2005 64 bit edition. Are there any other
methods for checking mail in SQL2005 64 bit edition?
p.s. We're connecting to Exchange Server 2003
I set up e-mail on my SQL server (7.0) via SMTP.
I installed Outlook '97. Typical Installation.
Everything was working fine, for couple of days,
then I got Dr. Watson messages, about MAPI.
Dr.Watson
The application, exemapisp32.dbg, generated an application error The error occurred on 11/ 7/2000 @ 11:35:48.437 The exception generated was c0000005 at address 6e4f2630 (<nosymbols>)
Then SQL will give me this message:
Unable to read local eventlog (reason: The data area passed to a system call is too small).
Anyway, try to reinstall Outlook '97, but the problem continues.
Any help, will be greatly appreciated.
Any help on the following error which I am getting when I am trying to set up SQL Mail for Internet Mail with Outlook Express?
Error 22030: A Mapi error(error no 271)occured.Unable to get the default MAPI Message store due to mapi error 271:One or more of the receipients was not found in the address book.
Thanks!
Hello:
We are running mssql 6.5, sp4 for an application.
WE followed the microsoft article: " how to use sql mail in Microsoft SQL Server 6.5 with Microsoft Outlook and Microsoft Exchange Server. WE also followed the suggestions outlined in document Q153159:" Troublshooting SQLMAIL with Microsoft Exchange Server.
After following all of the instuctions in both documents we get an error message of 17951:'Failed to start Microsoft Mail Session' when we click on sqlmail under server name in Enterprise Manager.
My network adminsitrator and I are both stumped why this doesn't work.
Has any one encountered this before? How do we resolve this?
Any information which can be provided will be greatly appreciated. THanks.
DAvid Spaisman
hi
i have use database mail in sql server2005 to send mail.
i have complete all step to configure databasemail.but test the mail
the error is "database mail stoped.Use sysmail_start_up to start database mail .
hello all,
I just created a very simple package in SQL 2005 using the Send Mail task - i made a connection manager & specified the Exchange server - and then ran the package and i got the below message: I am not sure what i did wrong since the message is pretty general. Anyone help would be very appreciated. Thanks
SSIS package "Test.dtsx" starting.
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Failure sending mail.".
Task failed: Send Mail Task
SSIS package "Test.dtsx" finished: Success.
I've got a job that sends out the results of a stored procedure in anemail via xp_sendmail. The job code is as follows:DECLARE @rlist varchar(1000)Declare @Q varchar(100)Select @Q = 'EXEC impact_exec..TLD_Reconciliation'Declare @Sub nvarchar(60)Select @Sub = 'TLD Reconciliation - Condensed Report'SELECT @rlist = 'jmiller@wbhq.com'exec master..xp_sendmail @recipients=@rlist,@query=@Q, @subject=@SubThe error message I get when running this in Query Analyzer is:ODBC error 7410 (42000) Remote access not allowed for Windows NT useractivated by SETUSER.In Enterprise Manager the owner of the stored procedure in question isdbo. Our SQL guru here suggested I change the owner of the storedprocedure from dbo to myself.I did that and got a warning message that changing the owner willbreak connections. (I'm paraphrasing here because I don't rememberthe exact wording of the warning.) Anyhoo, after changing the owner,and then trying to run the code in Query Analyzer I got the errormessage that the stored procedure could not be found.I'm not sure what to do here. I've never seen the error messagebefore. This same query worked just fine a couple of days ago.Any ideas?Thanks,Jennifer
View 1 Replies View RelatedI have a script task in which I check the size of a file.
If the size of a file is greater then 0 KB then I need to send this file as an attachment using send email task.
If size is equal to 0 KB then I don't want to send email at all.
In the script task, I have a flag(@sFileExists) which i set to true in case of size of file greater then 0 and false in other case.
I am using a precedance constraint (Expression : @sFileExists=true) and condition is logical AND.
After script task based on the condition (@sFileExists=true) I am using the send email task for sending the email.
But I am not receiving the email. Please sugest where I am wrong.
Please note that the send email task is working all-right separately.