Hi everyone,
I have a sql quey that selectes phoneNumbers from the database. Problem is some phone numbers have hypens in it and some doesn't. Is there any way in sql so that I can remove hyphens from the phone numbers
some numbers are like this
213-456-9999
and some are
2136789999
Please let me know if this is possible.
Thanks.
there are 5 hyphens. want to find it one by one.
set:
select ('wopipwier-lmklsdje-sdgbre-;erlsl;k-wertwer-wieroiu')
result:
col1|col2|col3 ....so on
- - -
Hi,I'm having trouble running the following query:select * from message where text_body like ' ----------%'ie, five spaces followed by at least ten hyphens. The query doesn'tcomplete, so eventually I cancel it. If I remove the hyphens from thequery ("... like ' %'") then it runs fine (though it doesn't findthe correct data).Am I confusing SQL Server by using a wildcard or regular expression?(I'm using SQL Server 2000 - 8.99.760).Thanks in advance for any helpRichard
View 5 Replies View RelatedI receive a file that will have hyphens between data items such as
123-aed-edr-45r-ui9
1-ed3-45r-rrr-98u
I need to split the values to load into a table that will hold the 5 separate data itens. The fields will always have the hyphens but could be different lengths. Any idea on a best approach to split this in tsql
I want to strip off the last three characters from an item number. The only thing is tht every item number is not the same lenght. The last three characters of this number are packing codes that I do not need. Fore example I can have all these numbers:
EFJ50701033
EFW1546066
RFM4925156
70561033
89541899
How would I remove the last three characters and only remain with whatever is in front of those three characters?
Any help is greatly appreciated!
Does anyone know how to get rid of rtf tags that are stored in the table? I need to filter out the data and wondering if there is a utility on the SQL Server that can do it.
View 16 Replies View RelatedHas anyone had to deal with removing punctuation (commas, apostrophes,etc.) from a column? What is the most efficient way to have thesecharacters automatically removed from the column?
View 3 Replies View RelatedI am trying to Strip off the Numbers witha Delimited List and just retain the Name of the Persons. but unable to do it. is there any function or code to do that in SQL
932908` James Fleser,935992` Prakash Sinha
Stripping off Numbers for the Above and Just retain the Names..
thanks
Question - if you had to completely strip all permissions from all databases in an instance and reset them, assuming you have metadata to support rebuilding the permissions, what steps would you follow? I can handle the iterating through each database, but at the database level, what steps would you take?
The reason I inquire on this is I currently have a job that I inherited that does just this. But it's buggy and was also written in for SQL Server 2000. With some of the changes in 2005, a few bugs have crept in, etc. And I would like to confirm my thoughts this. Or, if your opinion is why are you wasting your time on this? Then that's fine to and I'll review any constructive comments you may have.
Hi All,
I'm having trouble coming up with a function that will allow me to display only the date and time from a string in the following format:
JSMITH 1/1/2006 1:00:00AM
I've tried using substr with a negative position value, but since the date and time for each instance can be different, with it being anywhere from 18-21 characters, if the length is anything less than 20-21 characters, it will return part of the end of the username. What function can I use to only retrieve the date and time?
Hi
I have a field that starts with numbers and then has a description after if, eg.
"123 This is the description for string 123"
1. How would I go about stripping out the first instance of number to leave the string as "This is the description for string 123"
thanks.
Bill
I'm trying to strip out the First & Last Name from an Email Address. The email address is formatted as "FirstName.LastName@emailaddress.com" but sometimes a middle initial is used (ex: "First.M.Last@emailaddress.com").
I can locate the '@' sign and the first '.' period(from left to right) but need to find the first '.' from the left of the '@' sign.
I'm doing this in a view.
Here's some sample data and what I've tried:
CREATE TABLE dbo.Table1
(EmailAddr VARCHAR(255))
INSERT INTO dbo.Table1 (EmailAddr)
SELECT 'Andy.Smith@gmaddr.com'
UNION ALL
SELECT 'Betty.Lee-Jones@gmaddr.com'
[Code] .....
I have a table that contains an nvarchar column of data. The data is actually a monetary value; sometimes with a decimal point sometimes without.
My problem is that I need to strip the decimal portion of the string if it exists. From a select statement I can use:
SUBSTRING(DW_OBP_ORD_TMP_IC.VALUE,1,LEN(VALUE)-(LEN(VALUE)-CHARINDEX('.',DW_OBP_ORD_TMP_IC.VALUE)
if a decimal point exists. But if one does not the CharIndex comes back 0 and my equation does not work correctly.
I need to pull the data from the table, along with many other fields. How do I do this without using a cursor? I have millions of rows so need a solution that will be quick.
thanks in advance,
Marilyn
Hi,
As part of a data search project I need to be able to strip all non numeric characters from a text field. The field contains various forms of phone number in various formats. In order to search on it I am going to remove all non numeric characters from the input criteria and from the data being searched.
In order to do this I decided on using a SQL Server custom function: Pass in field. Loop through all chars, test against asci values for number range. return only numernic data concatenated into a string.
Are there any other more efficient ways of going about this?
I have a filename as follows:
123_20151016_3152_AIRHtest1.txt
What I would like to extract from this fill name is the "3152" only. What is the correct way to do this?
Hello, I have this Access 2K query that I need to re-create in MS SQLServer 2000, so I'm using the Query Analyzer to test it.One of the Access fields stores the home phone number. In the Accessquery, if the phone number is null, it fills it up with zeroes"000000000." If the phone has an input mask, it only gets the 9 numbers(area code included) and if the phone number's good (all numbers) thenit leaves it alone. That Access query is using immediate ifs toaccomplish that task.Does anyone have any idea how to copy this behavior into SQL Server2000? I've using the CASE statement but so far my code is not correct.I get stuck in the input mask. This is the Access code:HomePhone:IIf(IsNull([HomePhone]),"0000000000",IIf(Left([HomePhone],1)="(",Right(Left([Homephone],4),3)& Right(Left([Homephone],9),3) & Right([HomePhone],4),[HomePhone]))Thanks for all your help.JR.
View 2 Replies View RelatedHi there - I would like to share this strip of code with our SQL 2000DBA community. The code below strips all non-numeric characters from agiven string field and rebuilds the string. Very simple, but I had tobuild it from scratch due the lack of info on this specific matter. Iam sure there are better solutions out there, although I will be gladif this script can help anyone. Feel free to modify and comment itback.Regards,Rubem Linn JuniorMCSE, .NET developerWeb Apps Specialist------------------------------------------------------- BEGIN---------------------------------------------------DECLARE @String_Length AS INTEGER -- Length of the given stringDECLARE @Original_String as NVARCHAR(50) -- The field to stripnon-numeric charsDECLARE @counter as integer -- simple counter variableDECLARE @Stripped_String as nvarchar(50) -- The field after beenstripped-- Get the length of the field (string) to be parsedSELECT @String_Length = len(someStringField) FROM SomeTable WHEREFilterID = 001-- Get the field (string) to be parsedSELECT @Original_String = someStringField FROM SomeTable WHEREFilterID = 001-- Set counter variable to 1SELECT @counter = 1-- Reset this variableSELECT @Stripped_String = ''-- Initiate loop from 1 to the Length of the given stringWHILE (@counter) <= @String_LengthBEGIN-- Check if the char in the lap is numericif substring(@Original_String,@counter,1) LIKE '[0-9]'BEGIN-- Load this variable with the non-numeric-- data stripped from the original stringselect @Stripped_String = @Stripped_String +substring(@Original_String,@counter,1)END-- Increment the counter by oneselect @counter = @counter + 1END-- Print the original string with all charactersPRINT @Original_String-- Print the numeric data that was stripped outPRINT RTRIM(LTRIM(@Stripped_String))
View 1 Replies View Related
I am exporting from a SQL money field to a flat file. The datatype is set to DT_CY in SSIS. I need two decimal places in the flat file but instead I am getting 1.1 instead of 1.10.
Should I be using a different datatype or is there a way to set the number of decimals on the DT_CY datatype?
I'm running a query, actually its an insert that works when using the TSQL below.
However when I try to use the debugger to step through and using the exact same values as those below I get the following error:
[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification
Its Killing me because everything else works, but this. Can somebody help.
DECLARE @NoteID INT,-- NULL OUTPUT,
@Note_Description NVARCHAR(3000),-- = NULL,
@Date DateTime,-- = NULL OUTPUT,
@ByWho NVARCHAR(30),-- = NULL,
@FK_Action_Performed NVARCHAR(40),-- = NULL,
@FK_UserID INT,-- = NULL,
@FK_JobID INT,-- = NULL,
@Job_Date DateTime,-- = NULL,
@Start DateTime,-- = NULL,
@Finish DateTime,-- = NULL,
@BeenRead NVARCHAR(10),-- = NULL
@FK_UserIDList NVARCHAR(4000)-- = NULL
--SET @NoteID = 409 --NULL OUTPUT,
SET @Note_Description = 'Tetsing'
--SET @Date DateTime = NULL OUTPUT,
SET @ByWho = 'GeorgeAgaian'
SET @FK_Action_Performed = 'Worked hard'
SET @FK_UserID = 5
SET @FK_JobID = 29
SET @Job_Date = 28/01/03
SET @Start = '1:00:20 PM'
SET @Finish = '1:00:20 PM'
SET @BeenRead = 'UnRead'
SET @FK_UserIDList = '1,2,3'
--AS
--SET NOCOUNT ON
SET NOCOUNT ON
SET XACT_ABORT ON
BEGIN TRANSACTION
SET @Date = GETDATE()
-- Insert Values into the customer table
INSERT Note (Note_Description,
Date,
ByWho,
FK_Action_Performed,
FK_UserID,
FK_JobID,
Job_Date,
Start,
Finish)
SELECT --@NoteID,
@Note_Description,
@Date,
@ByWho,
@FK_Action_Performed,
@FK_UserID,
@FK_JobID,
@Job_Date,
@Start,
@Finish
-- Get the new Customer Identifier, return as OUTPUT param
SELECT @NoteID = @@IDENTITY
-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned
-- users.
IF @FK_UserIDList IS NOT NULL
EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList
-- Insert New Address record
-- Retrieve Address reference into @AddressId
-- EXEC spInsertForUserNote
-- @FK_UserID,
--@NoteID,
-- @BeenRead
-- @Fax,
-- @PKId,
-- @AddressId OUTPUT
COMMIT TRANSACTION
--------------------------------------------------
GO
ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)
SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1
FROM testsupplierSCNCR
I am getting the result of 01/01/2007
but in query analizer I get the result of
12/31/2006
Why the different dates
Hi,
I get this error dialog when I try to open all the rows of any table from Enterprise manager..
Any help would be really appreciated..
Thanks,
-Srini.
SQL Server 2005 9.0.3161 on Win 2k3 R2
I receive the following error:
"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I have traced this to an insert statement that executes as part of a stored procedure.
INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)
VALUES (@journal_id, @acct_id, @acct_recv_id, @amount)
There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.
Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).
Hey, i've written a query to search a database dependant on variables chosen by user etc etc. Opened up a new sqldatasource, entered the query shown below and went on to the test query page. Entered some test variables, everything works as it should do. Try to get it to show in a datagrid on a webpage - nothing. No data shows.
SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches
FROM dbo.MAKES INNER JOIN
dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN
dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN
dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN
dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID
WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) )
GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID
HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2
ORDER BY count(*) DESC
Here is the page source
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="	SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches 	FROM dbo.MAKES INNER JOIN 				 dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN 				 dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN 				 dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN 				 dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID 	WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or 		 (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) ) 	GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID 	HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END + 									 CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2 	ORDER BY count(*) DESC ">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="ATT_ID1" PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="TextBox1" Name="VAL1" PropertyName="Text" />
<asp:Parameter Name="ATT_ID2" />
<asp:Parameter Name="VAL2" />
<asp:Parameter Name="ATT_ID3" />
<asp:Parameter Name="VAL3" />
<asp:Parameter Name="ATT_ID4" />
<asp:Parameter Name="VAL4" />
</SelectParameters>
</asp:SqlDataSource>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="SELECT * FROM [ATTRIBUTES]"></asp:SqlDataSource>
<br />
<asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource2"
DataTextField="ATTRIBUTE_NAME" DataValueField="ATTRIBUTE_ID">
</asp:DropDownList>
<asp:TextBox ID="TextBox1" runat="server" AutoPostBack="True"></asp:TextBox><br />
<br />
<br />
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="DERIVATIVE_ID"
DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="DERIVATIVE_ID" HeaderText="DERIVATIVE_ID" InsertVisible="False"
ReadOnly="True" SortExpression="DERIVATIVE_ID" />
<asp:BoundField DataField="Matches" HeaderText="Matches" ReadOnly="True" SortExpression="Matches" />
</Columns>
</asp:GridView>
</asp:Content>
AFAIK I have configured the source to pick up the dropdownlist value and the textbox value (the text box is autopostback).
Am i not submitting the data correctly? (It worked with a simple query...just not with this one). I have tried a stored procedure which works when testing just not when its live on a webpage.
Please help!
(Visual Web Devleoper 2005 Express and SQL Server Management Studio Express)
I have the following code.
SELECT _bvSerialMasterFull.SerialNumber, _bvSerialMasterFull.SNStockLink, _bvSerialMasterFull.SNDateLMove, _bvSerialMasterFull.CurrentLoc,
_bvSerialMasterFull.CurrentAccLink, _bvSerialMasterFull.StockCode, _bvSerialMasterFull.CurrentAccount, _bvSerialMasterFull.CurrentLocationDesc,
_bvSerialNumbersFull.SNTxDate, _bvSerialNumbersFull.SNTxReference, _bvSerialNumbersFull.SNTrCodeID, _bvSerialNumbersFull.SNTransType,
_bvSerialNumbersFull.SNWarehouseID, _bvSerialNumbersFull.TransAccount, _bvSerialNumbersFull.TransTypeDesc,
[code]...
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.
Thanks in advance
Daniel Buchanan.
If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.
We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T
• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues
• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"
• We are using the last version of Excel Add-in
• We try to reinstall the MDS feature
• If I backup/restore MDS database to other server it works
• We updated to SQL 2012 SP2 + CU4 but the error persisted ...
Looking at the MDSTraceLog we are routed to the this msg
SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28
At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped
** Error found when try to get data from a entity using Excel add-in **
===================================
Sequence contains no elements
------------------------------
Program Location:
at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke()
at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)
[code]....
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120))
insert into #temptable
SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10
--column name
declare @cname varchar(30)
[code]...
-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!!
-- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"
set nocount on
go
if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1
if object_id('tempdb.dbo
[code]....
This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?
Hello everybody,
I'm developing a report using the following structure :
declare @sql as nvarchar(4000)
declare @where as nvarchar(2000)
set @sql = 'select ....'
If <conditional1>
begin
set @where = 'some where'
end
If <conditional2>
begin
set @where = 'some where'
end
set @sql = @sql + @where
exec(@sql)
I run it in query analyser and works fine, but when I try to run in Reporting Services, Visual studio stops responding and the cpu reaches 100 %.
I realize that when I cut off the if clauses, then it works at Reporting services.
Does anybody know what is happening?
Why the query works in query analyser and doesn't work in Reporting Service ?
Thanks,
Maurício
SQL Server 2012 Performance Dashboard Main advices me this:
Since the application is from a vendor and I have no control over its code, how can improve this sitation?
For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?
I want my output to be
CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc
Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.
I want to do it using SELECT. Is it possible?
do i need to nest a query in RS if i want a calculated column to be compared against a multi value variable? It looks like coding WHERE calcd name in (@variable) violates SQL syntax. My select looked like
SELECT ... ,CASE enddate WHEN null then 1 else 0 END calcd name
FROM...
WHERE ... and calcd name in (@variable)
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
<ParameterList>
<ColumnReference Column="@Measure" ParameterCompiledValue="'all'" />
</ParameterList>
</QueryPlan>
</StmtSimple>
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?